summaryrefslogtreecommitdiff
path: root/fs/dlm/recover.c
AgeCommit message (Collapse)Author
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 193Thomas Gleixner
Based on 1 normalized pattern(s): this copyrighted material is made available to anyone wishing to use modify copy or redistribute it subject to the terms and conditions of the gnu general public license v 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 45 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.342746075@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-25DLM: retry rcom when dlm_wait_function is timed out.tsutomu.owa@toshiba.co.jp
If a node sends a DLM_RCOM_STATUS command and an error occurs on the receiving side, the DLM_RCOM_STATUS_REPLY response may not be returned. We retransmitted the DLM_RCOM_STATUS command so that we do not wait for an infinite response. Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp> Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp> Signed-off-by: David Teigland <teigland@redhat.com>
2014-02-14dlm: use INFO for recovery messagesDavid Teigland
The log messages relating to the progress of recovery are minimal and very often useful. Change these to the KERN_INFO level so they are always available. Signed-off-by: David Teigland <teigland@redhat.com>
2013-02-27dlm: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Error return values from recover_idr_add() mix -1 and -errno. The conversion doesn't change that but it looks iffy. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27dlm: don't use idr_remove_all()Tejun Heo
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. The conversion isn't completely trivial for recover_idr_clear() as it's the only place in kernel which makes legitimate use of idr_remove_all() w/o idr_destroy(). Replace it with idr_remove() call inside idr_for_each_entry() loop. It goes on top so that it matches the operation order in recover_idr_del(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27dlm: use idr_for_each_entry() in recover_idr_clear() error pathTejun Heo
Convert recover_idr_clear() to use idr_for_each_entry() instead of idr_for_each(). It's somewhat less efficient this way but it shouldn't matter in an error path. This is to help with deprecation of idr_remove_all(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-16dlm: fix lvb invalidation conditionsDavid Teigland
When a node is removed that held a PW/EX lock, the existing master node should invalidate the lvb on the resource due to the purged lock. Previously, the existing master node was invalidating the lvb if it found only NL/CR locks on the resource during recovery for the removed node. This could lead to cases where it invalidated the lvb and shouldn't have, or cases where it should have invalidated and didn't. When recovery selects a *new* master node for a resource, and that new master finds only NL/CR locks on the resource after lock recovery, it should invalidate the lvb. This case was handled correctly (but was incorrectly applied to the existing master case also.) When a process exits while holding a PW/EX lock, the lvb on the resource should be invalidated. This was not happening. The lvb contents and VALNOTVALID flag should be recovered before granting locks in recovery so that the recovered lvb state is provided in the callback. The lvb was being recovered after the lock was granted. Signed-off-by: David Teigland <teigland@redhat.com>
2012-07-16dlm: fix conversion deadlock from recoveryDavid Teigland
The process of rebuilding locks on a new master during recovery could re-order the locks on the convert queue, creating an "in place" conversion deadlock that would not be resolved. Fix this by not considering queue order when granting conversions after recovery. Signed-off-by: David Teigland <teigland@redhat.com>
2012-07-16dlm: use wait_event_timeoutDavid Teigland
Use wait_event_timeout to avoid using a timer directly. Signed-off-by: David Teigland <teigland@redhat.com>
2012-07-16dlm: use idr instead of list for recovered rsbsDavid Teigland
When a large number of resources are being recovered, a linear search of the recover_list takes a long time. Use an idr in place of a list. Signed-off-by: David Teigland <teigland@redhat.com>
2012-07-16dlm: use rsbtbl as resource directoryDavid Teigland
Remove the dir hash table (dirtbl), and use the rsb hash table (rsbtbl) as the resource directory. It has always been an unnecessary duplication of information. This improves efficiency by using a single rsbtbl lookup in many cases where both rsbtbl and dirtbl lookups were needed previously. This eliminates the need to handle cases of rsbtbl and dirtbl being out of sync. In many cases there will be memory savings because the dir hash table no longer exists. Signed-off-by: David Teigland <teigland@redhat.com>
2012-05-02dlm: fixes for nodir modeDavid Teigland
The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04dlm: add node slots and generationDavid Teigland
Slot numbers are assigned to nodes when they join the lockspace. The slot number chosen is the minimum unused value starting at 1. Once a node is assigned a slot, that slot number will not change while the node remains a lockspace member. If the node leaves and rejoins it can be assigned a new slot number. A new generation number is also added to a lockspace. It is set and incremented during each recovery along with the slot collection/assignment. The slot numbers will be passed to gfs2 which will use them as journal id's. Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04dlm: move recovery barrier callsDavid Teigland
Put all the calls to recovery barriers in the same function to clarify where they each happen. Should not change any behavior. Also modify some recovery debug lines to make them consistent. Signed-off-by: David Teigland <teigland@redhat.com>
2011-11-18dlm: convert rsb list to rb_treeBob Peterson
Change the linked lists to rb_tree's in the rsb hash table to speed up searches. Slow rsb searches were having a large impact on gfs2 performance due to the large number of dlm locks gfs2 uses. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2009-01-08dlm: change rsbtbl rwlock to spinlockDavid Teigland
The rwlock is almost always used in write mode, so there's no reason to not use a spinlock instead. Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: use proper type for ->ls_recover_bufAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: keep cached master rsbs during recoveryDavid Teigland
To prevent the master of an rsb from changing rapidly, an unused rsb is kept on the "toss list" for a period of time to be reused. The toss list was being cleared completely for each recovery, which is unnecessary. Much of the benefit of the toss list can be maintained if nodes keep rsb's in their toss list that they are the master of. These rsb's need to be included when the resource directory is rebuilt during recovery. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: use dlm prefix on alloc and free functionsDavid Teigland
The dlm functions in memory.c should use the dlm_ prefix. Also, use kzalloc/kfree directly for dlm_direntry's, removing the wrapper functions. Signed-off-by: David Teigland <teigland@redhat.com>
2007-02-05[DLM] fix master recoveryDavid Teigland
If master recovery happens on an rsb in one recovery sequence, then that sequence is aborted before lock recovery happens, then in the next sequence, we rely on the previous master recovery (which may now be invalid due to another node ignoring a lookup result) and go on do to the lock recovery where we get stuck due to an invalid master value. recovery cycle begins: master of rsb X has left nodes A and B send node C an rcom lookup for X to find the new master C gets lookup from B first, sets B as new master, and sends reply back to B C gets lookup from A next, and sends reply back to A saying B is master A gets lookup reply from C and sets B as the new master in the rsb recovery cycle on A, B and C is aborted to start a new recovery B gets lookup reply from C and ignores it since there's a new recovery recovery cycle begins: some other node has joined B doesn't think it's the master of X so it doesn't rebuild it in the directory C looks up the master of X, no one is master, so it becomes new master B looks up the master of X, finds it's C A believes that B is the master of X, so it sends its lock to B B sends an error back to A A resends this repeats forever, the incorrect master value on A is never corrected The fix is to do master recovery on an rsb that still has the NEW_MASTER flag set from an earlier recovery sequence, and therefore didn't complete lock recovery. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05[DLM] rename dlm_config_info fieldsDavid Teigland
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we can use macros to add configfs functions to access them (in a later patch). No functional changes in this patch, just naming changes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[DLM] res_recover_locks_count not reset when recover_locks is abortedDavid Teigland
Red Hat BZ 213684 If a node sends an lkb to the new master (RCOM_LOCK message) during recovery and recovery is then aborted on both nodes before it gets a reply, the res_recover_locks_count needs to be reset to 0 so that when the subsequent recovery comes along and sends the lkb to the new master again the assertion doesn't trigger that checks that counter is zero. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-24[DLM] recover_locks not clearing NEW_MASTER flagDavid Teigland
When there are no locks on a resource, the recover_locks() function fails to clear the NEW_MASTER flag by going directly to out, missing the line that clears the flag. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-21[DLM] dump rsb and locks on assertDavid Teigland
Introduce new function dlm_dump_rsb() to call within assertions instead of dlm_print_rsb(). The new function dumps info about all locks on the rsb in addition to rsb details. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-07-26[DLM] set purged flag on rsbsDavid Teigland
If a node becomes the new master of an rsb during recovery, the LOCKS_PURGED flag needs to be set on it so that any waiting/converting locks will try to be granted. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-24[GFS2] Cast 64 bit printk args to unsigned long long.David Teigland
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-20[DLM] Update DLM to the latest patch levelDavid Teigland
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-18[DLM] The core of the DLM for GFS2/CLVMDavid Teigland
This is the core of the distributed lock manager which is required to use GFS2 as a cluster filesystem. It is also used by CLVM and can be used as a standalone lock manager independantly of either of these two projects. It implements VAX-style locking modes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>