summaryrefslogtreecommitdiff
path: root/fs/exofs
AgeCommit message (Collapse)Author
2012-05-28Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
Pull exofs updates from Boaz Harrosh: "Just a couple of patches. The first is a BUG fix destined for stable which missed the 3.4-rc7 Kernel. The second is just a fixture addition so exofs is able to be better exported as a cluster file system via pNFS." * 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Add SYSFS info for autologin/pNFS export exofs: Fix CRASH on very early IO errors.
2012-05-21exofs: Add SYSFS info for autologin/pNFS exportSachin Bhamare
Introduce sysfs infrastructure for exofs cluster filesystem. Each OSD target shows up as below in the sysfs hierarchy: /sys/fs/exofs/<osdname>_<partition_id>/devX Where <osdname>_<partition_id> is the unique identification of a Superblock. Where devX: 0 <= X < device_table_size. They are ordered in device-table order as specified to the mkfs.exofs command Each OSD device devX has following attributes : osdname - ReadOnly systemid - ReadOnly uri - Read/Write It is up to user-mode to update devX/uri for support of autologin. These sysfs information are used both for autologin as well as support for exporting exofs via a pNFSD server in user-mode. (.eg NFS-Ganesha) Signed-off-by: Sachin Bhamare <sbhamare@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-05-20exofs: Fix CRASH on very early IO errors.Boaz Harrosh
If at exofs_fill_super() we had an early termination do to any error, like an IO error while reading the super-block. We would crash inside exofs_free_sbi(). This is because sbi->oc.numdevs was set to 1, before we actually have a device table at all. Fix it by moving the sbi->oc.numdevs = 1 to after the allocation of the device table. Reported-by: Johannes Schild <JSchild@gmx.de> Stable: This is a bug since v3.2.0 CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-05-06vfs: Rename end_writeback() to clear_inode()Jan Kara
After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-03-28Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
Pull trivial exofs changes from Boaz Harrosh: "Just nothingness really. The big exofs changes are reserved for the next merge window." * 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Cap on the memcpy() size exofs: (trivial) Fix typo in super.c exofs: fix endian conversion in exofs_sync_fs()
2012-03-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile 1 from Al Viro: "This is _not_ all; in particular, Miklos' and Jan's stuff is not there yet." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits) ext4: initialization of ext4_li_mtx needs to be done earlier debugfs-related mode_t whack-a-mole hfsplus: add an ioctl to bless files hfsplus: change finder_info to u32 hfsplus: initialise userflags qnx4: new helper - try_extent() qnx4: get rid of qnx4_bread/qnx4_getblk take removal of PF_FORKNOEXEC to flush_old_exec() trim includes in inode.c um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it um: embed ->stub_pages[] into mmu_context gadgetfs: list_for_each_safe() misuse ocfs2: fix leaks on failure exits in module_init ecryptfs: make register_filesystem() the last potential failure exit ntfs: forgets to unregister sysctls on register_filesystem() failure logfs: missing cleanup on register_filesystem() failure jfs: mising cleanup on register_filesystem() failure make configfs_pin_fs() return root dentry on success configfs: configfs_create_dir() has parent dentry in dentry->d_parent configfs: sanitize configfs_create() ...
2012-03-20switch open-coded instances of d_make_root() to new helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20vfs: check i_nlink limits in vfs_{mkdir,rename_dir,link}Al Viro
New field of struct super_block - ->s_max_links. Maximal allowed value of ->i_nlink or 0; in the latter case all checks still need to be done in ->link/->mkdir/->rename instances. Note that this limit applies both to directoris and to non-directories. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20exofs: remove the second argument of k[un]map_atomic()Cong Wang
Ack-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-19exofs: Cap on the memcpy() sizeDan Carpenter
This data comes from the device, so probably it's fairly trustworthy but it makes the static checkers happy if we check it. [Boaz] the system_id_len is zero, if not present, or always OSD_SYSTEMID_LEN. So always copy OSD_SYSTEMID_LEN bytes. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-03-19exofs: (trivial) Fix typo in super.cMasanari Iida
Correct spelling "faild" to "failed" in fs/exofs/super.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-03-19exofs: fix endian conversion in exofs_sync_fs()Dan Carpenter
fscb->s_numfiles is an __le64 field so we need to use cpu_to_le64() to get a little endian 64 bit on big endian systems. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-09Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
* 'for-linus' of git://git.open-osd.org/linux-open-osd: ore: Must support none-PAGE-aligned IO ore: fix BUG_ON, too few sgs when reading ore: Fix crash in case of an IO error. ore: FIX breakage when MISC_FILESYSTEMS is not set
2012-01-08exofs: oops after late failure in mountAl Viro
We have already set ->s_root, so ->put_super() is going to be called. Freeing ->s_fs_info is a bloody bad idea when it's going to be dereferenced very shortly... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08ore: Must support none-PAGE-aligned IOBoaz Harrosh
NFS might send us offsets that are not PAGE aligned. So we must read in the reminder of the first/last pages, in cases we need it for Parity calculations. We only add an sg segments to read the partial page. But we don't mark it as read=true because it is a lock-for-write page. TODO: In some cases (IO spans a single unit) we can just adjust the raid_unit offset/length, but this is left for later Kernels. [Bug in 3.2.0 Kernel] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-06ore: fix BUG_ON, too few sgs when readingBoaz Harrosh
When reading RAID5 files, in rare cases, we calculated too few sg segments. There should be two extra for the beginning and end partial units. Also "too few sg segments" should not be a BUG_ON there is all the mechanics in place to handle it, as a short read. So just return -ENOMEM and the rest of the code will gracefully split the IO. [Bug in 3.2.0 Kernel] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-06ore: Fix crash in case of an IO error.Boaz Harrosh
The users of ore_check_io() expect the reported device (In case of error) to be indexed relative to the passed-in ore_components table, and not the logical dev index. This causes a crash inside objlayoutdriver in case of an IO error. [Bug in 3.2.0 Kernel] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-06ore: FIX breakage when MISC_FILESYSTEMS is not setBoaz Harrosh
As Reported by Randy Dunlap When MISC_FILESYSTEMS is not enabled and NFS4.1 is: fs/built-in.o: In function `objio_alloc_io_state': objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state' fs/built-in.o: In function `_write_done': objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io' fs/built-in.o: In function `_read_done': ... When MISC_FILESYSTEMS, which is more of a GUI thing then anything else, is not selected. exofs/Kconfig is never examined during Kconfig, and it can not do it's magic stuff to automatically select everything needed. We must split exofs/Kconfig in two. The ore one is always included. And the exofs one is left in it's old place in the menu. [Needed for the 3.2.0 Kernel] CC: Stable Tree <stable@kernel.org> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-01-03exofs: propagate umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->mknod() to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->create() to umode_tAl Viro
vfs_create() ignores everything outside of 16bit subset of its mode argument; switching it to umode_t is obviously equivalent and it's the only caller of the method Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch vfs_mkdir() and ->mkdir() to umode_tAl Viro
vfs_mkdir() gets int, but immediately drops everything that might not fit into umode_t and that's the only caller of ->mkdir()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: fix the stupidity with i_dentry in inode destructorsAl Viro
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
* 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (25 commits) nfs: set vs_hidden on nfs4_callback_version4 (try #2) pnfs-obj: Support for RAID5 read-4-write interface. pnfs-obj: move to ore 03: Remove old raid engine pnfs-obj: move to ore 02: move to ORE pnfs-obj: move to ore 01: ore_layout & ore_components pnfs-obj: Rename objlayout_io_state => objlayout_io_res pnfs-obj: Get rid of objlayout_{alloc,free}_io_state pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelist pnfs-obj: Remove redundant EOF from objlayout_io_state nfs: Remove unused variable from write.c nfs: Fix unused variable warning from file.c NFS: Remove no-op less-than-zero checks on unsigned variables. NFS: Clean up nfs4_xdr_dec_secinfo() NFS: Fix documenting comment for nfs_create_request() NFS4: fix cb_recallany decode error nfs4: serialize layoutcommit SUNRPC: remove rpcbind clients destruction on module cleanup SUNRPC: remove rpcbind clients creation during service registering NFSd: call svc rpcbind cleanup explicitly SUNRPC: cleanup service destruction ...
2011-11-02pnfs-obj: move to ore 02: move to OREBoaz Harrosh
In this patch we are actually moving to the ORE. (Object Raid Engine). objio_state holds a pointer to an ore_io_state. Once we have an ore_io_state at hand we can call the ore for reading/writing. We register on the done path to kick off the nfs io_done mechanism. Again for Ease of reviewing the old code is "#if 0" but is not removed so the diff command works better. The old code will be removed in the next patch. fs/exofs/Kconfig::ORE is modified to also be auto-included if PNFS_OBJLAYOUT is set. Since we now depend on ORE. (See comments in fs/exofs/Kconfig) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02filesystems: add set_nlink()Miklos Szeredi
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-31fs: add module.h to files that were implicitly using itPaul Gortmaker
Some files were using the complete module.h infrastructure without actually including the header at all. Fix them up in advance so once the implicit presence is removed, we won't get failures like this: CC [M] fs/nfsd/nfssvc.o fs/nfsd/nfssvc.c: In function 'nfsd_create_serv': fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function) fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once fs/nfsd/nfssvc.c:335: error: for each function it appears in.) fs/nfsd/nfssvc.c: In function 'nfsd': fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit' make[3]: *** [fs/nfsd/nfssvc.o] Error 1 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-24ore: Enable RAID5 mountsBoaz Harrosh
Now that we support raid5 Enable it at mount. Raid6 will come next raid4 is not demanded for so it will probably not be enabled. (Until some one wants it) NOTE: That mkfs.exofs had support for raid5/6 since long time ago. (Making an empty raidX FS is just as easy as raid0 ;-} ) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24exofs: Support for RAID5 read-4-write interface.Boaz Harrosh
The ore need suplied a r4w_get_page/r4w_put_page API from Filesystem so it can get cache pages to read-into when writing parial stripes. Also I commented out and NULLed the .writepage (singular) vector. Because it gives terrible write pattern to raid and is apparently not needed. Even in OOM conditions the system copes (even better) with out it. TODO: How to specify to write_cache_pages() to start or include a certain page? Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24ore: RAID5 WriteBoaz Harrosh
This is finally the RAID5 Write support. The bigger part of this patch is not the XOR engine itself, But the read4write logic, which is a complete mini prepare_for_striping reading engine that can read scattered pages of a stripe into cache so it can be used for XOR calculation. That is, if the write was not stripe aligned. The main algorithm behind the XOR engine is the 2 dimensional array: struct __stripe_pages_2d. A drawing might save 1000 words --- __stripe_pages_2d | n = pages_in_stripe_unit; w = group_width - parity; | pages array presented to the XOR lib | | V | __1_page_stripe[0].pages --> [c0][c1]..[cw][c_par] <---| | | __1_page_stripe[1].pages --> [c0][c1]..[cw][c_par] <--- | ... | ... | __1_page_stripe[n].pages --> [c0][c1]..[cw][c_par] ^ | data added columns first then row --- The pages are put on this array columns first. .i.e: p0-of-c0, p1-of-c0, ... pn-of-c0, p0-of-c1, ... So we are doing a corner turn of the pages. Note that pages will zigzag down and left. but are put sequentially in growing order. So when the time comes to XOR the stripe, only the beginning and end of the array need be checked. We scan the array and any NULL spot will be field by pages-to-be-read. The FS that wants to support RAID5 needs to supply an operations-vector that searches a given page in cache, and specifies if the page is uptodate or need reading. All these pages to be read are put on a slave ore_io_state and synchronously read. All the pages of a stripe are read in one IO, using the scatter gather mechanism. In write we constrain our IO to only be incomplete on a single stripe. Meaning either the complete IO is within a single stripe so we might have pages to read from both beginning or end of the strip. Or we have some reading to do at beginning but end at strip boundary. The left over pages are pushed to the next IO by the API already established by previous work, where an IO offset/length combination presented to the ORE might get the length truncated and the user must re-submit the leftover pages. (Both exofs and NFS support this) But any ORE user should make it's best effort to align it's IO before hand and avoid complications. A cached ore_layout->stripe_size member can be used for that calculation. (NOTE: that ORE demands that stripe_size may not be bigger then 32bit) What else? Well read it and tell me. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24ore: RAID5 readBoaz Harrosh
This patch introduces the first stage of RAID5 support mainly the skip-over-raid-units when reading. For writes it inserts BLANK units, into where XOR blocks should be calculated and written to. It introduces the new "general raid maths", and the main additional parameters and components needed for raid5. Since at this stage it could corrupt future version that actually do support raid5. The enablement of raid5 mounting and setting of parity-count > 0 is disabled. So the raid5 code will never be used. Mounting of raid5 is only enabled later once the basic XOR write is also in. But if the patch "enable RAID5" is applied this code has been tested to be able to properly read raid5 volumes and is according to standard. Also it has been tested that the new maths still properly supports RAID0 and grouping code just as before. (BTW: I have found more bugs in the pnfs-obj RAID math fixed here) The ore.c file is getting too big, so new ore_raid.[hc] files are added that will include the special raid stuff that are not used in striping and mirrors. In future write support these will get bigger. When adding the ore_raid.c to Kbuild file I was forced to rename ore.ko to libore.ko. Is it possible to keep source file, say ore.c and module file ore.ko the same even if there are multiple files inside ore.ko? Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24ore: Make ore_calc_stripe_info EXPORT_SYMBOLBoaz Harrosh
ore_calc_stripe_info is needed by exofs::export.c for the layout calculations. Make it exportable Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore/exofs: Change ore_check_io APIBoaz Harrosh
Current ore_check_io API receives a residual pointer, to report partial IO. But it is actually not used, because in a multiple devices IO there is never a linearity in the IO failure. On the other hand if every failing device is reported through a received callback measures can be taken to handle only failed devices. One at a time. This will also be needed by the objects-layout-driver for it's error reporting facility. Exofs is not currently using the new information and keeps the old behaviour of failing the complete IO in case of an error. (No partial completion) TODO: Use an ore_check_io callback to set_page_error only the failing pages. And re-dirty write pages. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore/exofs: Define new ore_verify_layoutBoaz Harrosh
All users of the ore will need to check if current code supports the given layout. For example RAID5/6 is not currently supported. So move all the checks from exofs/super.c to a new ore_verify_layout() to be used by ore users. Note that any new layout should be passed through the ore_verify_layout() because the ore engine will prepare and verify some internal members of ore_layout, and assumes it's called. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore: Support for partial component tableBoaz Harrosh
Users like the objlayout-driver would like to only pass a partial device table that covers the IO in question. For example exofs divides the file into raid-group-sized chunks and only serves group_width number of devices at a time. The partiality is communicated by setting ore_componets->first_dev and the array covers all logical devices from oc->first_dev upto (oc->first_dev + oc->numdevs) The ore_comp_dev() API receives a logical device index and returns the actual present device in the table. An out-of-range dev_index will BUG. Logical device index is the theoretical device index as if all the devices of a file are present. .i.e: total_devs = group_width * mirror_p1 * group_count 0 <= dev_index < total_devs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore: Support for short read/writesBoaz Harrosh
Memory conditions and max_bio constraints might cause us to not comply to the full length of the requested IO. Instead of failing the complete IO we can issue a shorter read/write and report how much was actually executed in the ios->length member. All users must check ios->length at IO_done or upon return of ore_read/write and re-issue the reminder of the bytes. Because other wise there is no error returned like before. This is part of the effort to support the pnfs-obj layout driver. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14exofs: Support for short read/writesBoaz Harrosh
If at read/write_done the actual IO was shorter then requested, reported in returned ios->length. It is not an error. The reminder of the pages should just be unlocked but not marked uptodate or end_page_writeback. They will be re issued later by the VFS. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore: Remove check for ios->kern_buff in _prepare_for_striping to laterBoaz Harrosh
Move the check and preparation of the ios->kern_buff case to later inside _write_mirror(). Since read was never used with ios->kern_buff its support is removed instead of fixed. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore: cleanup: Embed an ore_striping_info inside ore_io_stateBoaz Harrosh
Now that each ore_io_state covers only a single raid group. A single striping_info math is needed. Embed one inside ore_io_state to cache the calculation results and eliminate an extra call. Also the outer _prepare_for_striping is removed since it does nothing. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-14ore: Only IO one group at a time (API change)Boaz Harrosh
Usually a single IO is confined to one group of devices (group_width) and at the boundary of a raid group it can spill into a second group. Current code would allocate a full device_table size array at each io_state so it can comply to requests that span two groups. Needless to say that is very wasteful, specially when device_table count can get very large (hundreds even thousands), while a group_width is usually 8 or 10. * Change ore API to trim on IO that spans two raid groups. The user passes offset+length to ore_get_rw_state, the ore might trim on that length if spanning a group boundary. The user must check ios->length or ios->nrpages to see how much IO will be preformed. It is the responsibility of the user to re-issue the reminder of the IO. * Modify exofs To copy spilled pages on to the next IO. This means one last kick is needed after all coalescing of pages is done. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-04ore/exofs: Change the type of the devices array (API change)Boaz Harrosh
In the pNFS obj-LD the device table at the layout level needs to point to a device_cache node, where it is possible and likely that many layouts will point to the same device-nodes. In Exofs we have a more orderly structure where we have a single array of devices that repeats twice for a round-robin view of the device table This patch moves to a model that can be used by the pNFS obj-LD where struct ore_components holds an array of ore_dev-pointers. (ore_dev is newly defined and contains a struct osd_dev *od member) Each pointer in the array of pointers will point to a bigger user-defined dev_struct. That can be accessed by use of the container_of macro. In Exofs an __alloc_dev_table() function allocates the ore_dev-pointers array as well as an exofs_dev array, in one allocation and does the addresses dance to set everything pointing correctly. It still keeps the double allocation trick for the inodes round-robin view of the table. The device table is always allocated dynamically, also for the single device case. So it is unconditionally freed at umount. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-03ore: Make ore_striping_info and ore_calc_stripe_info publicBoaz Harrosh
The struct ore_striping_info will be used later in other structures. And ore_calc_stripe_info as well. Rename them make struct ore_striping_info public. ore_calc_stripe_info is still static, will be made public on first use. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-03exofs: Remove unused data_map member from exofs_sb_infoBoaz Harrosh
The struct pnfs_osd_data_map data_map member of exofs_sb_info was never used after mount. In fact all it's members were duplicated by the ore_layout structure. So just remove the duplicated information. Also removed some stupid, but perfectly supported, restrictions on layout parameters. The case where num_devices is not divisible by mirror_count+1 is perfectly fine since the rotating device view will eventually use all the devices it can get. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@tonian.com>
2011-10-03exofs: Rename struct ore_components comps => ocBoaz Harrosh
ore_components already has a comps member so this leads to things like comps->comps which is annoying. the name oc was already used in new code. So rename all old usage of ore_components comps => ore_components oc. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-03exofs/super.c: local functions should be staticH Hartley Sweeten
This quiets the following sparse noise: warning: symbol 'exofs_sync_fs' was not declared. Should it be static? warning: symbol 'exofs_free_sbi' was not declared. Should it be static? warning: symbol 'exofs_get_parent' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-03exofs/ore.c: local functions should be staticH Hartley Sweeten
This quiets the sparse noise: warning: symbol '_calc_trunk_info' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
* 'for-linus' of git://git.open-osd.org/linux-open-osd: ore: Make ore its own module exofs: Rename raid engine from exofs/ios.c => ore exofs: ios: Move to a per inode components & device-table exofs: Move exofs specific osd operations out of ios.c exofs: Add offset/length to exofs_get_io_state exofs: Fix truncate for the raid-groups case exofs: Small cleanup of exofs_fill_super exofs: BUG: Avoid sbi realloc exofs: Remove pnfs-osd private definitions nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4
2011-08-06ore: Make ore its own moduleBoaz Harrosh
Export everything from ore need exporting. Change Kbuild and Kconfig to build ore.ko as an independent module. Import ore from exofs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: Rename raid engine from exofs/ios.c => oreBoaz Harrosh
ORE stands for "Objects Raid Engine" This patch is a mechanical rename of everything that was in ios.c and its API declaration to an ore.c and an osd_ore.h header. The ore engine will later be used by the pnfs objects layout driver. * File ios.c => ore.c * Declaration of types and API are moved from exofs.h to a new osd_ore.h * All used types are prefixed by ore_ from their exofs_ name. * Shift includes from exofs.h to osd_ore.h so osd_ore.h is independent, include it from exofs.h. Other than a pure rename there are no other changes. Next patch will move the ore into it's own module and will export the API to be used by exofs and later the layout driver Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>