summaryrefslogtreecommitdiff
path: root/fs/ext4/Makefile
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30ext4: support GETFSMAP ioctlsDarrick J. Wong
Support the GETFSMAP ioctls so that we can use the xfs free space management tools to probe ext4 as well. Note that this is a partial implementation -- we only report fixed-location metadata and free space; everything else is reported as "unknown". Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-10ext4 crypto: migrate into vfs's crypto engineJaegeuk Kim
This patch removes the most parts of internal crypto codes. And then, it modifies and adds some ext4-specific crypt codes to use the generic facility. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-09-23ext4: move sysfs code from super.c to fs/ext4/sysfs.cTheodore Ts'o
Also statically allocate the ext4_kset and ext4_feat objects, since we only need exactly one of each, and it's simpler and less code if we drop the dynamic allocation and deallocation when it's not needed. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-12ext4 crypto: filename encryption facilitiesMichael Halcrow
Signed-off-by: Uday Savagaonkar <savagaon@google.com> Signed-off-by: Ildar Muslukhov <ildarm@google.com> Signed-off-by: Michael Halcrow <mhalcrow@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-12ext4 crypto: add encryption key management facilitiesMichael Halcrow
Signed-off-by: Michael Halcrow <mhalcrow@google.com> Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-12ext4 crypto: add ext4 encryption facilitiesMichael Halcrow
On encrypt, we will re-assign the buffer_heads to point to a bounce page rather than the control_page (which is the original page to write that contains the plaintext). The block I/O occurs against the bounce page. On write completion, we re-assign the buffer_heads to the original plaintext page. On decrypt, we will attach a read completion callback to the bio struct. This read completion will decrypt the read contents in-place prior to setting the page up-to-date. The current encryption mode, AES-256-XTS, lacks cryptographic integrity. AES-256-GCM is in-plan, but we will need to devise a mechanism for handling the integrity data. Signed-off-by: Michael Halcrow <mhalcrow@google.com> Signed-off-by: Ildar Muslukhov <ildarm@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-11ext4 crypto: add encryption policy and password salt supportMichael Halcrow
Signed-off-by: Michael Halcrow <mhalcrow@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com>
2015-04-08ext4 crypto: add ext4_mpage_readpages()Theodore Ts'o
This takes code from fs/mpage.c and optimizes it for ext4. Its primary reason is to allow us to more easily add encryption to ext4's read path in an efficient manner. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2012-12-10ext4: Remove CONFIG_EXT4_FS_XATTRTao Ma
Ted has sent out a RFC about removing this feature. Eric and Jan confirmed that both RedHat and SUSE enable this feature in all their product. David also said that "As far as I know, it's enabled in all Android kernels that use ext4." So it seems OK for us. And what's more, as inline data depends its implementation on xattr, and to be frank, I don't run any test again inline data enabled while xattr disabled. So I think we should add inline data and remove this config option in the same release. [ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which isn't much in the grand scheme of things. Since no one seems to be testing this configuration except for some automated compile farms, on balance we are better removing this config option, and so that it is effectively always enabled. -- tytso ] Cc: David Brown <davidb@codeaurora.org> Cc: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: add the basic function for inline data supportTao Ma
Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-08ext4: add operations on extent status treeZheng Liu
This patch adds operations on a extent status tree. CC: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-27ext4: move ext4_ind_* functions from inode.c to indirect.cAmir Goldstein
This patch moves functions from inode.c to indirect.c. The moved functions are ext4_ind_* functions and their helpers. Functions called from inode.c are declared extern. Signed-off-by: Amir Goldstein <amir73il@users.sf.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-24ext4: add support for multiple mount protectionJohann Lombardi
Prevent an ext4 filesystem from being mounted multiple times. A sequence number is stored on disk and is periodically updated (every 5 seconds by default) by a mounted filesystem. At mount time, we now wait for s_mmp_update_interval seconds to make sure that the MMP sequence does not change. In case of failure, the nodename, bdevname and the time at which the MMP block was last updated is displayed. Signed-off-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27ext4: use bio layer instead of buffer layer in mpage_da_submit_ioTheodore Ts'o
Call the block I/O layer directly instad of going through the buffer layer. This should give us much better performance and scalability, as well as lowering our CPU utilization when doing buffered writeback. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-17ext4: online defrag -- Add EXT4_IOC_MOVE_EXT ioctlAkira Fujita
The EXT4_IOC_MOVE_EXT exchanges the blocks between orig_fd and donor_fd, and then write the file data of orig_fd to donor_fd. ext4_mext_move_extent() is the main fucntion of ext4 online defrag, and this patch includes all functions related to ext4 online defrag. Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-17ext4: Add a comprehensive block validity check to ext4_get_blocks()Theodore Ts'o
To catch filesystem bugs or corruption which could lead to the filesystem getting severly damaged, this patch adds a facility for tracking all of the filesystem metadata blocks by contiguous regions in a red-black tree. This allows quick searching of the tree to locate extents which might overlap with filesystem metadata blocks. This facility is also used by the multi-block allocator to assure that it is not allocating blocks out of the system zone, as well as by the routines used when reading indirect blocks and extents information from disk to make sure their contents are valid. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10ext4: Rename ext4dev to ext4Theodore Ts'o
The ext4 filesystem is getting stable enough that it's time to drop the "dev" prefix. Also remove the requirement for the TEST_FILESYS flag. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-29ext4: Add multi block allocator for ext4Alex Tomas
Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Add EXT4_IOC_MIGRATE ioctlAneesh Kumar K.V
The below patch add ioctl for migrating ext3 indirect block mapped inode to ext4 extent mapped inode. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2006-12-07[PATCH] ext4: uninline large functionsAndrew Morton
Saves nearly 4kbytes on x86. Cc: Arnaldo Carvalho de Melo <acme@mandriva.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext3: add extent map supportAlex Tomas
On disk extents format: /* * this is extent on-disk structure * it's used at the bottom of the tree */ struct ext3_extent { __le32 ee_block; /* first logical block extent covers */ __le16 ee_len; /* number of blocks covered by extent */ __le16 ee_start_hi; /* high 16 bits of physical block */ __le32 ee_start; /* low 32 bigs of physical block */ }; Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbolsMingming Cao
Mingming Cao originally did this work, and Shaggy reproduced it using some scripts from her. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: initial copy of files from ext3Dave Kleikamp
Start of the ext4 patch series. See Documentation/filesystems/ext4.txt for details. This is a simple copy of the files in fs/ext3 to fs/ext4 and /usr/incude/linux/ext3* to /usr/include/ex4* Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>