summaryrefslogtreecommitdiff
path: root/fs/ext4/page-io.c
AgeCommit message (Collapse)Author
2022-01-15mm: introduce memalloc_retry_wait()NeilBrown
Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-04ext4: convert from atomic_t to refcount_t on ext4_io_end->countXiyu Yang
refcount_t type and corresponding API can protect refcounters from accidental underflow and overflow and further use-after-free situations. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/1626674355-55795-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-11block: rename BIO_MAX_PAGES to BIO_MAX_VECSChristoph Hellwig
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop confusing users of the bio API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-22ext4: remove unnecessary wbc parameter from ext4_bio_write_pageLei Chen
ext4_bio_write_page does not need wbc parameter, since its parameter io contains the io_wbc field. The io::io_wbc is initialized by ext4_io_submit_init which is called in ext4_writepages and ext4_writepage functions prior to ext4_bio_write_page. Therefor, when ext4_bio_write_page is called, wbc info has already been included in io parameter. Signed-off-by: Lei Chen <lennychen@tencent.com> Link: https://lore.kernel.org/r/1607669664-25656-1-git-send-email-lennychen@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-03ext4: remove the null check of bio_vec pageXianting Tian
bv_page can't be NULL in a valid bio_vec, so we can remove the NULL check, as we did in other places when calling bio_for_each_segment_all() to go through all bio_vec of a bio. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Link: https://lore.kernel.org/r/20201020082201.34257-1-tian.xianting@h3c.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-08ext4: add inline encryption supportEric Biggers
Wire up ext4 to support inline encryption via the helper functions which fs/crypto/ now provides. This includes: - Adding a mount option 'inlinecrypt' which enables inline encryption on encrypted files where it can be used. - Setting the bio_crypt_ctx on bios that will be submitted to an inline-encrypted file. Note: submit_bh_wbc() in fs/buffer.c also needed to be patched for this part, since ext4 sometimes uses ll_rw_block() on file data. - Not adding logically discontiguous data to bios that will be submitted to an inline-encrypted file. - Not doing filesystem-layer crypto on inline-encrypted files. Co-developed-by: Satya Tangirala <satyat@google.com> Signed-off-by: Satya Tangirala <satyat@google.com> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20200702015607.1215430-5-satyat@google.com Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-03-28fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_tThomas Gleixner
Bit spinlocks are problematic if PREEMPT_RT is enabled, because they disable preemption, which is undesired for latency reasons and breaks when regular spinlocks are taken within the bit_spinlock locked region because regular spinlocks are converted to 'sleeping spinlocks' on RT. PREEMPT_RT replaced the bit spinlocks with regular spinlocks to avoid this problem. The replacement was done conditionaly at compile time, but Christoph requested to do an unconditional conversion. Jan suggested to move the spinlock into a existing padding hole which avoids a size increase of struct buffer_head on production kernels. As a benefit the lock gains lockdep coverage. [ bigeasy: Remove the wrapper and use always spinlock_t and move it into the padding hole ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Link: https://lkml.kernel.org/r/20191118132824.rclhrbujqh4b4g4d@linutronix.de
2020-01-17ext4: fix deadlock allocating crypto bounce page from mempoolEric Biggers
ext4_writepages() on an encrypted file has to encrypt the data, but it can't modify the pagecache pages in-place, so it encrypts the data into bounce pages and writes those instead. All bounce pages are allocated from a mempool using GFP_NOFS. This is not correct use of a mempool, and it can deadlock. This is because GFP_NOFS includes __GFP_DIRECT_RECLAIM, which enables the "never fail" mode for mempool_alloc() where a failed allocation will fall back to waiting for one of the preallocated elements in the pool. But since this mode is used for all a bio's pages and not just the first, it can deadlock waiting for pages already in the bio to be freed. This deadlock can be reproduced by patching mempool_alloc() to pretend that pool->alloc() always fails (so that it always falls back to the preallocations), and then creating an encrypted file of size > 128 KiB. Fix it by only using GFP_NOFS for the first page in the bio. For subsequent pages just use GFP_NOWAIT, and if any of those fail, just submit the bio and start a new one. This will need to be fixed in f2fs too, but that's less straightforward. Fixes: c9af28fdd449 ("ext4 crypto: don't let data integrity writebacks fail with ENOMEM") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20191231181149.47619-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-14ext4: bio_alloc with __GFP_DIRECT_RECLAIM never failsGao Xiang
Similar to [1] [2], bio_alloc with __GFP_DIRECT_RECLAIM flags guarantees bio allocation under some given restrictions, as stated in block/bio.c and fs/direct-io.c So here it's ok to not check for NULL value from bio_alloc(). [1] https://lore.kernel.org/r/20191030035518.65477-1-gaoxiang25@huawei.com [2] https://lore.kernel.org/r/20190830162812.GA10694@infradead.org Cc: Theodore Ts'o <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Link: https://lore.kernel.org/r/20191031092315.139267-1-gaoxiang25@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-10-22ext4: Add support for blocksize < pagesize in dioread_nolockRitesh Harjani
This patch adds the support for blocksize < pagesize for dioread_nolock feature. Since in case of blocksize < pagesize, we can have multiple small buffers of page as unwritten extents, we need to maintain a vector of these unwritten extents which needs the conversion after the IO is complete. Thus, we maintain a list of tuple <offset, size> pair (io_end_vec) for this & traverse this list to do the unwritten to written conversion. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20191016073711.4141-5-riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-10-22ext4: Add API to bring in support for unwritten io_end_vec conversionRitesh Harjani
This patch just brings in the API for conversion of unwritten io_end_vec extents which will be required for blocksize < pagesize support for dioread_nolock feature. No functional changes in this patch. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20191016073711.4141-3-riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-10-22ext4: keep uniform naming convention for io & io_end variablesRitesh Harjani
Let's keep uniform naming convention for ext4_submit_io (io) & ext4_end_io_t (io_end) structures, to avoid any confusion. No functionality change in this patch. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20191016073711.4141-2-riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-07-15Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block updates from Jens Axboe: "A later pull request with some followup items. I had some vacation coming up to the merge window, so certain things items were delayed a bit. This pull request also contains fixes that came in within the last few days of the merge window, which I didn't want to push right before sending you a pull request. This contains: - NVMe pull request, mostly fixes, but also a few minor items on the feature side that were timing constrained (Christoph et al) - Report zones fixes (Damien) - Removal of dead code (Damien) - Turn on cgroup psi memstall (Josef) - block cgroup MAINTAINERS entry (Konstantin) - Flush init fix (Josef) - blk-throttle low iops timing fix (Konstantin) - nbd resize fixes (Mike) - nbd 0 blocksize crash fix (Xiubo) - block integrity error leak fix (Wenwen) - blk-cgroup writeback and priority inheritance fixes (Tejun)" * tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits) MAINTAINERS: add entry for block io cgroup null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED block: Limit zone array allocation size sd_zbc: Fix report zones buffer allocation block: Kill gfp_t argument of blkdev_report_zones() block: Allow mapping of vmalloc-ed buffers block/bio-integrity: fix a memory leak bug nvme: fix NULL deref for fabrics options nbd: add netlink reconfigure resize support nbd: fix crash when the blksize is zero block: Disable write plugging for zoned block devices block: Fix elevator name declaration block: Remove unused definitions nvme: fix regression upon hot device removal and insertion blk-throttle: fix zero wait time for iops throttled group block: Fix potential overflow in blk_report_zones() blkcg: implement REQ_CGROUP_PUNT blkcg, writeback: Implement wbc_blkcg_css() blkcg, writeback: Add wbc->no_cgroup_owner blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner() ...
2019-07-10blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()Tejun Heo
wbc_account_io() does a very specific job - try to see which cgroup is actually dirtying an inode and transfer its ownership to the majority dirtier if needed. The name is too generic and confusing. Let's rename it to something more specific. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-28ext4: encrypt only up to last block in ext4_bio_write_page()Eric Biggers
As an optimization, don't encrypt blocks fully beyond i_size, since those definitely won't need to be written out. Also add a comment. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: support encrypting multiple filesystem blocks per pageEric Biggers
Rename fscrypt_encrypt_page() to fscrypt_encrypt_pagecache_blocks() and redefine its behavior to encrypt all filesystem blocks from the given region of the given page, rather than assuming that the region consists of just one filesystem block. Also remove the 'inode' and 'lblk_num' parameters, since they can be retrieved from the page as it's already assumed to be a pagecache page. This is in preparation for allowing encryption on ext4 filesystems with blocksize != PAGE_SIZE. This is based on work by Chandan Rajendra. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-05-28fscrypt: simplify bounce page handlingEric Biggers
Currently, bounce page handling for writes to encrypted files is unnecessarily complicated. A fscrypt_ctx is allocated along with each bounce page, page_private(bounce_page) points to this fscrypt_ctx, and fscrypt_ctx::w::control_page points to the original pagecache page. However, because writes don't use the fscrypt_ctx for anything else, there's no reason why page_private(bounce_page) can't just point to the original pagecache page directly. Therefore, this patch makes this change. In the process, it also cleans up the API exposed to filesystems that allows testing whether a page is a bounce page, getting the pagecache page from a bounce page, and freeing a bounce page. Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-12Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A large number of bug fixes and cleanups. One new feature to allow users to more easily find the jbd2 journal thread for a particular ext4 file system" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits) jbd2: jbd2_get_transaction does not need to return a value jbd2: fix invalid descriptor block checksum ext4: fix bigalloc cluster freeing when hole punching under load ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task ext4: Change debugging support help prefix from EXT4 to Ext4 ext4: fix compile error when using BUFFER_TRACE jbd2: fix compile warning when using JBUFFER_TRACE ext4: fix some error pointer dereferences ext4: annotate more implicit fall throughs ext4: annotate implicit fall throughs ext4: don't update s_rev_level if not required jbd2: fold jbd2_superblock_csum_{verify,set} into their callers jbd2: fix race when writing superblock ext4: fix crash during online resizing ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT ext4: add mask of ext4 flags to swap ext4: update quota information while swapping boot loader inode ext4: cleanup pagecache before swap i_data ext4: fix check of inode in swap_inode_boot_loader ext4: unlock unused_pages timely when doing writeback ...
2019-03-09Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds
Pull fscrypt updates from Eric Biggers: "First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer for fscrypt, and we're now using a shared git tree. So we've updated MAINTAINERS accordingly, and I'm doing the pull request this time. The actual changes for v5.1 are: - Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION and make fscrypt support for all fscrypt-capable filesystems be controlled by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA works. - Improve error code for rename() and link() into encrypted directories. - Various cleanups" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: MAINTAINERS: add Eric Biggers as an fscrypt maintainer fscrypt: return -EXDEV for incompatible rename or link into encrypted dir fscrypt: remove filesystem specific build config option f2fs: use IS_ENCRYPTED() to check encryption status ext4: use IS_ENCRYPTED() to check encryption status fscrypt: remove CRYPTO_CTR dependency
2019-02-15block: allow bio_for_each_segment_all() to iterate over multi-page bvecMing Lei
This patch introduces one extra iterator variable to bio_for_each_segment_all(), then we can allow bio_for_each_segment_all() to iterate over multi-page bvec. Given it is just one mechannical & simple change on all bio_for_each_segment_all() users, this patch does tree-wide change in one single patch, so that we can avoid to use a temporary helper for this conversion. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-10ext4: cleanup clean_bdev_aliases() callszhangyi (F)
Now, we have already handle all cases of forgetting buffer in jbd2_journal_forget(), the buffer should not be mapped to blockdevice when reallocating it. So this patch remove all clean_bdev_aliases() and clean_bdev_bh_alias() calls which were invoked by ext4 explicitly. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-01-23fscrypt: remove filesystem specific build config optionChandan Rajendra
In order to have a common code base for fscrypt "post read" processing for all filesystems which support encryption, this commit removes filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION) and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose value affects all the filesystems making use of fscrypt. Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23ext4: use IS_ENCRYPTED() to check encryption statusChandan Rajendra
This commit removes the ext4 specific ext4_encrypted_inode() and makes use of the generic IS_ENCRYPTED() macro to check for the encryption status of an inode. Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-12-07blkcg: associate writeback bios with a blkgDennis Zhou
One of the goals of this series is to remove a separate reference to the css of the bio. This can and should be accessed via bio_blkcg(). In this patch, wbc_init_bio() now requires a bio to have a device associated with it. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-01blkcg: revert blkcg cleanups seriesDennis Zhou
This reverts a series committed earlier due to null pointer exception bug report in [1]. It seems there are edge case interactions that I did not consider and will need some time to understand what causes the adverse interactions. The original series can be found in [2] with a follow up series in [3]. [1] https://www.spinics.net/lists/cgroups/msg20719.html [2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/ This reverts the following commits: d459d853c2ed, b2c3fa546705, 101246ec02b5, b3b9f24f5fcc, e2b0989954ae, f0fcb3ec89f3, c839e7a03f92, bdc2491708c4, 74b7c02a9bc1, 5bf9a1f3b4ef, a7b39b4e961c, 07b05bcc3213, 49f4c2dc2b50, 27e6fa996c53 Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: associate writeback bios with a blkgDennis Zhou (Facebook)
One of the goals of this series is to remove a separate reference to the css of the bio. This can and should be accessed via bio_blkcg. In this patch, the wbc_init_bio call is changed such that it must be called after a queue has been associated with the bio. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-27ext4: add support for passing in write hints for buffered writesJens Axboe
Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-30ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio()Theodore Ts'o
Add fallback code and a WARN_ONCE() call instead of a BUG_ON() in the ext4_end_bio() function. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-20Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "For this cycle we add support for the shutdown ioctl, which is primarily used for testing, but which can be useful on production systems when a scratch volume is being destroyed and the data on it doesn't need to be saved. This found (and we fixed) a number of bugs with ext4's recovery to corrupted file system --- the bugs increased the amount of data that could be potentially lost, and in the case of the inline data feature, could cause the kernel to BUG. Also included are a number of other bug fixes, including in ext4's fscrypt, DAX, inline data support" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits) ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN ext4: fix fencepost in s_first_meta_bg validation ext4: don't BUG when truncating encrypted inodes on the orphan list ext4: do not use stripe_width if it is not set ext4: fix stripe-unaligned allocations dax: assert that i_rwsem is held exclusive for writes ext4: fix DAX write locking ext4: add EXT4_IOC_GOINGDOWN ioctl ext4: add shutdown bit and check for it ext4: rename s_resize_flags to s_ext4_flags ext4: return EROFS if device is r/o and journal replay is needed ext4: preserve the needs_recovery flag when the journal is aborted jbd2: don't leak modified metadata buffers on an aborted journal ext4: fix inline data error paths ext4: move halfmd4 into hash.c directly ext4: fix use-after-iput when fscrypt contexts are inconsistent jbd2: fix use after free in kjournald2() ext4: fix data corruption in data=journal mode ext4: trim allocation requests to group size ext4: replace BUG_ON with WARN_ON in mb_find_extent() ...
2017-02-06fscrypt: split supp and notsupp declarations into their own headersEric Biggers
Previously, each filesystem configured without encryption support would define all the public fscrypt functions to their notsupp_* stubs. This list of #defines had to be updated in every filesystem whenever a change was made to the public fscrypt functions. To make things more maintainable now that we have three filesystems using fscrypt, split the old header fscrypto.h into several new headers. fscrypt_supp.h contains the real declarations and is included by filesystems when configured with encryption support, whereas fscrypt_notsupp.h contains the inline stubs and is included by filesystems when configured without encryption support. fscrypt_common.h contains common declarations needed by both. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-05ext4: add shutdown bit and check for itTheodore Ts'o
Add a shutdown bit that will cause ext4 processing to fail immediately with EIO. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-14Merge branch 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull fs meta data unmap optimization from Jens Axboe: "A series from Jan Kara, providing a more efficient way for unmapping meta data from in the buffer cache than doing it block-by-block. Provide a general helper that existing callers can use" * 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-block: fs: Remove unmap_underlying_metadata fs: Add helper to clean bdev aliases under a bh and use it ext2: Use clean_bdev_aliases() instead of iteration ext4: Use clean_bdev_aliases() instead of iteration direct-io: Use clean_bdev_aliases() instead of handmade iteration fs: Provide function to unmap metadata for a range of blocks
2016-12-14Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "This merge request includes the dax-4.0-iomap-pmd branch which is needed for both ext4 and xfs dax changes to use iomap for DAX. It also includes the fscrypt branch which is needed for ubifs encryption work as well as ext4 encryption and fscrypt cleanups. Lots of cleanups and bug fixes, especially making sure ext4 is robust against maliciously corrupted file systems --- especially maliciously corrupted xattr blocks and a maliciously corrupted superblock. Also fix ext4 support for 64k block sizes so it works well on ppcle. Fixed mbcache so we don't miss some common xattr blocks that can be merged" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits) dax: Fix sleep in atomic contex in grab_mapping_entry() fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL fscrypt: Delay bounce page pool allocation until needed fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page() fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page() fscrypt: Never allocate fscrypt_ctx on in-place encryption fscrypt: Use correct index in decrypt path. fscrypt: move the policy flags and encryption mode definitions to uapi header fscrypt: move non-public structures and constants to fscrypt_private.h fscrypt: unexport fscrypt_initialize() fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info() fscrypto: move ioctl processing more fully into common code fscrypto: remove unneeded Kconfig dependencies MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches ext4: do not perform data journaling when data is encrypted ext4: return -ENOMEM instead of success ext4: reject inodes with negative size ext4: remove another test in ext4_alloc_file_blocks() Documentation: fix description of ext4's block_validity mount option ext4: fix checks for data=ordered and journal_async_commit options ...
2016-11-13fscrypt: Let fs select encryption index/tweakDavid Gstir
Avoid re-use of page index as tweak for AES-XTS when multiple parts of same page are encrypted. This will happen on multiple (partial) calls of fscrypt_encrypt_page on same page. page->index is only valid for writeback pages. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13fscrypt: Enable partial page encryptionDavid Gstir
Not all filesystems work on full pages, thus we should allow them to hand partial pages to fscrypt for en/decryption. Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-04fs: Add helper to clean bdev aliases under a bh and use itJan Kara
Add a helper function that clears buffer heads from a block device aliasing passed bh. Use this helper function from filesystems instead of the original unmap_underlying_metadata() to save some boiler plate code and also have a better name for the functionalily since it is not unmapping anything for a *long* time. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01block,fs: use REQ_* flags directlyChristoph Hellwig
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-11fs: use mapping_set_error instead of opencoded set_bitMichal Hocko
The mapping_set_error() helper sets the correct AS_ flag for the mapping so there is no reason to open code it. Use the helper directly. [akpm@linux-foundation.org: be honest about conversion from -ENXIO to -EIO] Link: http://lkml.kernel.org/r/20160912111608.2588-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30ext4: remove unused variableEric Engestrom
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
2016-07-26Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The major change this cycle is deleting ext4's copy of the file system encryption code and switching things over to using the copies in fs/crypto. I've updated the MAINTAINERS file to add an entry for fs/crypto listing Jaeguk Kim and myself as the maintainers. There are also a number of bug fixes, most notably for some problems found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also fixed is a writeback deadlock detected by generic/130, and some potential races in the metadata checksum code" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) ext4: verify extent header depth ext4: short-cut orphan cleanup on error ext4: fix reference counting bug on block allocation error MAINTAINRES: fs-crypto maintainers update ext4 crypto: migrate into vfs's crypto engine ext2: fix filesystem deadlock while reading corrupted xattr block ext4: fix project quota accounting without quota limits enabled ext4: validate s_reserved_gdt_blocks on mount ext4: remove unused page_idx ext4: don't call ext4_should_journal_data() on the journal inode ext4: Fix WARN_ON_ONCE in ext4_commit_super() ext4: fix deadlock during page writeback ext4: correct error value of function verifying dx checksum ext4: avoid modifying checksum fields directly during checksum verification ext4: check for extents that wrap around jbd2: make journal y2038 safe jbd2: track more dependencies on transaction commit jbd2: move lockdep tracking to journal_s jbd2: move lockdep instrumentation for jbd2 handles ext4: respect the nobarrier mount option in nojournal mode ...
2016-07-10ext4 crypto: migrate into vfs's crypto engineJaegeuk Kim
This patch removes the most parts of internal crypto codes. And then, it modifies and adds some ext4-specific crypt codes to use the generic facility. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-06-07block, fs, mm, drivers: use bio set/get op accessorsMike Christie
This patch converts the simple bi_rw use cases in the block, drivers, mm and fs code to set/get the bio operation using bio_set_op_attrs/bio_op These should be simple one or two liner cases, so I just did them in one patch. The next patches handle the more complicated cases in a module per patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-05ext4: remove unnecessary bio get/putJens Axboe
ext4_io_submit() used to check for EOPNOTSUPP after bio submission, which is why it had to get an extra reference to the bio before submitting it. But since we no longer touch the bio after submission, get rid of the redundant get/put of the bio. If we do get the extra reference, we enter the slower path of having to flag this bio as now having external references. Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "These changes contains a fix for overlayfs interacting with some (badly behaved) dentry code in various file systems. These have been reviewed by Al and the respective file system mtinainers and are going through the ext4 tree for convenience. This also has a few ext4 encryption bug fixes that were discovered in Android testing (yes, we will need to get these sync'ed up with the fs/crypto code; I'll take care of that). It also has some bug fixes and a change to ignore the legacy quota options to allow for xfstests regression testing of ext4's internal quota feature and to be more consistent with how xfs handles this case" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: ignore quota mount options if the quota feature is enabled ext4 crypto: fix some error handling ext4: avoid calling dquot_get_next_id() if quota is not enabled ext4: retry block allocation for failed DIO and DAX writes ext4: add lockdep annotations for i_data_sem ext4: allow readdir()'s of large empty directories to be interrupted btrfs: fix crash/invalid memory access on fsync when using overlayfs ext4 crypto: use dget_parent() in ext4_d_revalidate() ext4: use file_dentry() ext4: use dget_parent() in ext4_file_open() nfs: use file_dentry() fs: add file_dentry() ext4 crypto: don't let data integrity writebacks fail with ENOMEM ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2024-06-17 02:54:50 +0000