| Age | Commit message (Collapse) | Author |
|---|
|
Encrypted pages during GC are read and cached in META_MAPPING.
However, due to cached pages in META_MAPPING, there is an issue where
newly written pages are lost by IPU or DIO writes.
Thread A - f2fs_gc() Thread B
/* phase 3 */
down_write(i_gc_rwsem)
ra_data_block() ---- (a)
up_write(i_gc_rwsem)
f2fs_direct_IO() :
- down_read(i_gc_rwsem)
- __blockdev_direct_io()
- get_data_block_dio_write()
- f2fs_dio_submit_bio() ---- (b)
- up_read(i_gc_rwsem)
/* phase 4 */
down_write(i_gc_rwsem)
move_data_block() ---- (c)
up_write(i_gc_rwsem)
(a) In phase 3 of f2fs_gc(), up-to-date page is read from storage and
cached in META_MAPPING.
(b) In thread B, writing new data by IPU or DIO write on same blkaddr as
read in (a). cached page in META_MAPPING become out-dated.
(c) In phase 4 of f2fs_gc(), out-dated page in META_MAPPING is copied to
new blkaddr. In conclusion, the newly written data in (b) is lost.
To address this issue, invalidating pages in META_MAPPING before IPU or
DIO write.
Fixes: 6aa58d8ad20a ("f2fs: readahead encrypted block during GC")
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Commit 3c62be17d4f5 ("f2fs: support multiple devices") missed
to support direct IO for multiple device feature, this patch
adds to support the missing part of multidevice feature.
In addition, for multiple device image, we should be aware of
any issued direct write IO rather than just buffered write IO,
so that fsync and syncfs can issue a preflush command to the
device where direct write IO goes, to persist user data for
posix compliant.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Added two options into "mode=" mount option to make it possible for
developers to simulate filesystem fragmentation/after-GC situation
itself. The developers use these modes to understand filesystem
fragmentation/after-GC condition well, and eventually get some
insights to handle them better.
"fragment:segment": f2fs allocates a new segment in ramdom position.
With this, we can simulate the after-GC condition.
"fragment:block" : We can scatter block allocation with
"max_fragment_chunk" and "max_fragment_hole" sysfs
nodes. f2fs will allocate 1..<max_fragment_chunk>
blocks in a chunk and make a hole in the length of
1..<max_fragment_hole> by turns in a newly allocated
free segment. Plus, this mode implicitly enables
"fragment:segment" option for more randomness.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_balance_fs_bg(), it needs to check both NAT_ENTRIES and INO_ENTRIES
memory usage to decide whether we should skip background checkpoint, otherwise
we may always skip checking INO_ENTRIES memory usage, so that INO_ENTRIES may
potentially cause high memory footprint.
Fixes: 493720a48543 ("f2fs: fix to avoid REQ_TIME and CP_TIME collision")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch enables f2fs_balance_fs_bg() to check all metadatas' dirty
threshold rather than just checking node block's, so that checkpoint()
from background can be triggered more frequently to avoid heaping up
too much dirty metadatas.
Threshold value by default:
race with foreground ops single type global
No 16MB 24MB
Yes 24MB 36MB
In addtion, let f2fs_balance_fs_bg() be aware of roll-forward sapce
as well as fsync().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Don't create discard thread when device doesn't support realtime discard
or user specifies nodiscard mount option.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Added F2FS_IOSTAT config option to support getting IO statistics through
sysfs and printing out periodic IO statistics tracepoint events and
moved I/O statistics related codes into separate files for better
maintenance.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
[Jaegeuk Kim: set default=y]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch supports to inject fault into f2fs_kmem_cache_alloc().
Usage:
a) echo 32768 > /sys/fs/f2fs/<dev>/inject_type or
b) mount -o fault_type=32768 <dev> <mountpoint>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
During f2fs_write_checkpoint(), once we failed in
f2fs_flush_nat_entries() or do_checkpoint(), metadata of filesystem
such as prefree bitmap, nat/sit version bitmap won't be recovered,
it may cause f2fs image to be inconsistent, let's just set CP error
flag to avoid further updates until we figure out a scheme to rollback
all metadatas in such condition.
Reported-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As James Z reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=213877
[1.] One-line summary of the problem:
Mount multiple SMR block devices exceed certain number cause system non-response
[2.] Full description of the problem/report:
Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB).
Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang.
The number of SMR devices with other FS mounted on this system does not interfere with the result above.
[3.] Keywords (i.e., modules, networking, kernel):
F2FS, SMR, Memory
[4.] Kernel information
[4.1.] Kernel version (uname -a):
Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
[4.2.] Kernel .config file:
Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64
[5.] Most recent kernel version which did not have the bug:
None
[6.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/admin-guide/oops-tracing.rst)
None
[7.] A small shell script or example program which triggers the
problem (if possible)
mount /dev/sdX /mnt/0X
[8.] Memory consumption
With 24 * 14T SMR Block device with F2FS
free -g
total used free shared buff/cache available
Mem: 46 36 0 0 10 10
Swap: 0 0 0
With 3 * 14T SMR Block device with F2FS
free -g
total used free shared buff/cache available
Mem: 7 5 0 0 1 1
Swap: 7 0 7
The root cause is, there are three bitmaps:
- cur_valid_map
- ckpt_valid_map
- discard_map
and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are
necessary, but discard_map is optional, since this bitmap will only be
useful in mountpoint that small discard is enabled.
For a blkzoned device such as SMR or ZNS devices, f2fs will only issue
discard for a section(zone) when all blocks of that section are invalid,
so, for such device, we don't need small discard functionality at all.
This patch introduces a new mountoption "discard_unit=block|segment|
section" to support issuing discard with different basic unit which is
aligned to block, segment or section, so that user can specify
"discard_unit=segment" or "discard_unit=section" to disable small
discard functionality.
Note that this mount option can not be changed by remount() due to
related metadata need to be initialized during mount().
In order to save memory, let's use "discard_unit=section" for blkzoned
device by default.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
F2FS have dirty page count control for batched sequential
write in writepages, and get the value of min_seq_blocks by
blocks_per_seg * segs_per_sec(segs_per_sec defaults to 1).
But in some scenes we set a lager section size, Min_seq_blocks
will become too large to achieve the expected effect(eg. 4thread
sequential write, the number of merge requests will be reduced).
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
SBI_NEED_FSCK is an indicator that fsck.f2fs needs to be triggered, so it
is not fully critical to stop any IO writes. So, let's allow to write data
instead of reporting EIO forever given SBI_NEED_FSCK, but do keep OPU.
Fixes: 955772787667 ("f2fs: drop inplace IO if fs status is abnormal")
Cc: <stable@kernel.org> # v5.13+
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch supports to migrate swapfile in aligned write mode during
swapon in order to keep swapfile being aligned to section as much as
possible, then pinned swapfile will locates fully filled section which
may not affected by GC.
However, for the case that swapfile's size is not aligned to section
size, it will still leave last extent in file's tail as unaligned due
to its size is smaller than section size, like case #2.
case #1
xfs_io -f /mnt/f2fs/file -c "pwrite 0 4M" -c "fsync"
Before swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..3047]: 1123352..1126399 3048 0x1000
1: [3048..7143]: 237568..241663 4096 0x1000
2: [7144..8191]: 245760..246807 1048 0x1001
After swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..8191]: 249856..258047 8192 0x1001
Kmsg:
F2FS-fs (zram0): Swapfile (2) is not align to section:
1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * n)
case #2
xfs_io -f /mnt/f2fs/file -c "pwrite 0 3M" -c "fsync"
Before swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..3047]: 246808..249855 3048 0x1000
1: [3048..6143]: 237568..240663 3096 0x1001
After swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 258048..262143 4096 0x1000
1: [4096..6143]: 238616..240663 2048 0x1001
Kmsg:
F2FS-fs (zram0): Swapfile: last extent is not aligned to section
F2FS-fs (zram0): Swapfile (2) is not align to section:
1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * n)
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Support to use address space of inner inode to cache compressed block,
in order to improve cache hit ratio of random read.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Given RO feature in superblock, we don't need to check provisioning/reserve
spaces and SSA area.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Update the logging uses that have unnecessary newlines as the f2fs_printk
function and so its f2fs_<level> macro callers already adds one.
This allows searching single line logging entries with an easier grep and
also avoids unnecessary blank lines in the logging.
Miscellanea:
o Coalesce formats
o Align to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Restruct f2fs page private layout for below reasons:
There are some cases that f2fs wants to set a flag in a page to
indicate a specified status of page:
a) page is in transaction list for atomic write
b) page contains dummy data for aligned write
c) page is migrating for GC
d) page contains inline data for inline inode flush
e) page belongs to merkle tree, and is verified for fsverity
f) page is dirty and has filesystem/inode reference count for writeback
g) page is temporary and has decompress io context reference for compression
There are existed places in page structure we can use to store
f2fs private status/data:
- page.flags: PG_checked, PG_private
- page.private
However it was a mess when we using them, which may cause potential
confliction:
page.private PG_private PG_checked page._refcount (+1 at most)
a) -1 set +1
b) -2 set
c), d), e) set
f) 0 set +1
g) pointer set
The other problem is page.flags has no free slot, if we can avoid set
zero to page.private and set PG_private flag, then we use non-zero value
to indicate PG_private status, so that we may have chance to reclaim
PG_private slot for other usage. [1]
The other concern is f2fs has bad scalability in aspect of indicating
more page status.
So in this patch, let's restructure f2fs' page.private as below to
solve above issues:
Layout A: lowest bit should be 1
| bit0 = 1 | bit1 | bit2 | ... | bit MAX | private data .... |
bit 0 PAGE_PRIVATE_NOT_POINTER
bit 1 PAGE_PRIVATE_ATOMIC_WRITE
bit 2 PAGE_PRIVATE_DUMMY_WRITE
bit 3 PAGE_PRIVATE_ONGOING_MIGRATION
bit 4 PAGE_PRIVATE_INLINE_INODE
bit 5 PAGE_PRIVATE_REF_RESOURCE
bit 6- f2fs private data
Layout B: lowest bit should be 0
page.private is a wrapped pointer.
After the change:
page.private PG_private PG_checked page._refcount (+1 at most)
a) 11 set +1
b) 101 set +1
c) 1001 set +1
d) 10001 set +1
e) set
f) 100001 set +1
g) pointer set +1
[1] https://lore.kernel.org/linux-f2fs-devel/20210422154705.GO3596236@casper.infradead.org/T/#u
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a
pc : f2fs_inplace_write_data+0x144/0x208
lr : f2fs_inplace_write_data+0x134/0x208
Call trace:
f2fs_inplace_write_data+0x144/0x208
f2fs_do_write_data_page+0x270/0x770
f2fs_write_single_data_page+0x47c/0x830
__f2fs_write_data_pages+0x444/0x98c
f2fs_write_data_pages.llvm.16514453770497736882+0x2c/0x38
do_writepages+0x58/0x118
__writeback_single_inode+0x44/0x300
writeback_sb_inodes+0x4b8/0x9c8
wb_writeback+0x148/0x42c
wb_do_writeback+0xc8/0x390
wb_workfn+0xb0/0x2f4
process_one_work+0x1fc/0x444
worker_thread+0x268/0x4b4
kthread+0x13c/0x158
ret_from_fork+0x10/0x18
Fixes: 955772787667 ("f2fs: drop inplace IO if fs status is abnormal")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we added a new mount option, "checkpoint_merge", which
introduces a kernel thread dealing with the f2fs checkpoints. Once we
start to manage the IO priority along with blk-cgroup, the checkpoint
operation can be processed in a lower priority under the process
context. Since the checkpoint holds all the filesystem operations, we
give a higher priority to the checkpoint thread all the time.
Enhancements:
- introduce gc_merge mount option to introduce a checkpoint thread
- improve to run discard thread efficiently
- allow modular compression algorithms
- expose # of overprivision segments to sysfs
- expose runtime compression stat to sysfs
Bug fixes:
- fix OOB memory access by the node id lookup
- avoid touching checkpointed data in the checkpoint-disabled mode
- fix the resizing flow to avoid kernel panic and race conditions
- fix block allocation issues on pinned files
- address some swapfile issues
- fix hugtask problem and kernel panic during atomic write operations
- don't start checkpoint thread in RO
And, we've cleaned up some kernel coding style and build warnings. In
addition, we fixed some minor race conditions and error handling
routines"
* tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (48 commits)
f2fs: drop inplace IO if fs status is abnormal
f2fs: compress: remove unneed check condition
f2fs: clean up left deprecated IO trace codes
f2fs: avoid using native allocate_segment_by_default()
f2fs: remove unnecessary struct declaration
f2fs: fix to avoid NULL pointer dereference
f2fs: avoid duplicated codes for cleanup
f2fs: document: add description about compressed space handling
f2fs: clean up build warnings
f2fs: fix the periodic wakeups of discard thread
f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
f2fs: fix to avoid GC/mmap race with f2fs_truncate()
f2fs: set checkpoint_merge by default
f2fs: Fix a hungtask problem in atomic write
f2fs: fix to restrict mount condition on readonly block device
f2fs: introduce gc_merge mount option
f2fs: fix to cover __allocate_new_section() with curseg_lock
f2fs: fix wrong alloc_type in f2fs_do_replace_block
f2fs: delete empty compress.h
f2fs: fix a typo in inode.c
...
|
|
If filesystem has cp_error or need_fsck status, let's drop inplace IO
to avoid further corruption of fs data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As we did for other cases, in fix_curseg_write_pointer(), let's
use wrapped f2fs_allocate_new_section() instead of native
allocate_segment_by_default(), by this way, it fixes to cover
segment allocation with curseg_lock and sentry_lock.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : f2fs_put_page+0x1c/0x26c
lr : __revoke_inmem_pages+0x544/0x75c
f2fs_put_page+0x1c/0x26c
__revoke_inmem_pages+0x544/0x75c
__f2fs_commit_inmem_pages+0x364/0x3c0
f2fs_commit_inmem_pages+0xc8/0x1a0
f2fs_ioc_commit_atomic_write+0xa4/0x15c
f2fs_ioctl+0x5b0/0x1574
file_ioctl+0x154/0x320
do_vfs_ioctl+0x164/0x740
__arm64_sys_ioctl+0x78/0xa4
el0_svc_common+0xbc/0x1d0
el0_svc_handler+0x74/0x98
el0_svc+0x8/0xc
In f2fs_put_page, we access page->mapping is NULL.
The root cause is:
In some cases, the page refcount and ATOMIC_WRITTEN_PAGE
flag miss set for page-priavte flag has been set.
We add f2fs_bug_on like this:
f2fs_register_inmem_page()
{
...
f2fs_set_page_private(page, ATOMIC_WRITTEN_PAGE);
f2fs_bug_on(F2FS_I_SB(inode), !IS_ATOMIC_WRITTEN_PAGE(page));
...
}
The bug on stack follow link this:
PC is at f2fs_register_inmem_page+0x238/0x2b4
LR is at f2fs_register_inmem_page+0x2a8/0x2b4
f2fs_register_inmem_page+0x238/0x2b4
f2fs_set_data_page_dirty+0x104/0x164
set_page_dirty+0x78/0xc8
f2fs_write_end+0x1b4/0x444
generic_perform_write+0x144/0x1cc
__generic_file_write_iter+0xc4/0x174
f2fs_file_write_iter+0x2c0/0x350
__vfs_write+0x104/0x134
vfs_write+0xe8/0x19c
SyS_pwrite64+0x78/0xb8
To fix this issue, let's add page refcount add page-priavte flag.
The page-private flag is not cleared and needs further analysis.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Ge Qiu <qiuge@huawei.com>
Signed-off-by: Dehe Gu <gudehe@huawei.com>
Signed-off-by: Yi Chen <chenyi77@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs_segment_has_free_slot() was copied and modified from
__next_free_blkoff(), they are almost the same, clean up to
reuse common code as much as possible.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch combined the below three clean-up patches.
- modify open brace '{' following function definitions
- ERROR: spaces required around that ':'
- ERROR: spaces required before the open parenthesis '('
- ERROR: spaces prohibited before that ','
- Made suggested modifications from checkpatch in reference to WARNING:
Missing a blank line after declarations
Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com>
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Fix the unnecessary periodic wakeups of discard thread that happens under
below two conditions -
1. When f2fs is heavily utilized over 80%, the current discard policy
sets the max sleep timeout of discard thread as 50ms
(DEF_MIN_DISCARD_ISSUE_TIME). But this is set even when there are
no pending discard commands to be issued.
2. In the issue_discard_thread() path when there are no pending discard
commands, it fails to reset the wait_ms to max timeout value.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Callers may pass fio parameter with NULL value to f2fs_allocate_data_block(),
so we should make sure accessing fio's field after fio's validation check.
Fixes: f608c38c59c6 ("f2fs: clean up parameter of f2fs_allocate_data_block()")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In the cache writing process, if it is an atomic file, increase the page
count of F2FS_WB_CP_DATA, otherwise increase the page count of
F2FS_WB_DATA.
When you step into the hook branch due to insufficient memory in
f2fs_write_begin, f2fs_drop_inmem_pages_all will be called to traverse
all atomic inodes and clear the FI_ATOMIC_FILE mark of all atomic files.
In f2fs_drop_inmem_pages，first acquire the inmem_lock , revoke all the
inmem_pages, and then clear the FI_ATOMIC_FILE mark. Before this mark is
cleared, other threads may hold inmem_lock to add inmem_pages to the inode
that has just been emptied inmem_pages, and increase the page count of
F2FS_WB_CP_DATA.
When the IO returns, it is found that the FI_ATOMIC_FILE flag is cleared
by f2fs_drop_inmem_pages_all, and f2fs_is_atomic_file returns false,which
causes the page count of F2FS_WB_DATA to be decremented. The page count of
F2FS_WB_CP_DATA cannot be cleared. Finally, hungtask is triggered in
f2fs_wait_on_all_pages because get_pages will never return zero.
process A: process B:
f2fs_drop_inmem_pages_all
->f2fs_drop_inmem_pages of inode#1
->mutex_lock(&fi->inmem_lock)
->__revoke_inmem_pages of inode#1 f2fs_ioc_commit_atomic_write
->mutex_unlock(&fi->inmem_lock) ->f2fs_commit_inmem_pages of inode#1
->mutex_lock(&fi->inmem_lock)
->__f2fs_commit_inmem_pages
->f2fs_do_write_data_page
->f2fs_outplace_write_data
->do_write_page
->f2fs_submit_page_write
->inc_page_count(sbi, F2FS_WB_CP_DATA )
->mutex_unlock(&fi->inmem_lock)
->spin_lock(&sbi->inode_lock[ATOMIC_FILE]);
->clear_inode_flag(inode, FI_ATOMIC_FILE)
->spin_unlock(&sbi->inode_lock[ATOMIC_FILE])
f2fs_write_end_io
->dec_page_count(sbi, F2FS_WB_DATA );
We can fix the problem by putting the action of clearing the FI_ATOMIC_FILE
mark into the inmem_lock lock. This operation can ensure that no one will
submit the inmem pages before the FI_ATOMIC_FILE mark is cleared, so that
there will be no atomic writes waiting for writeback.
Fixes: 57864ae5ce3a ("f2fs: limit # of inmemory pages")
Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In this patch, we will add two new mount options: "gc_merge" and
"nogc_merge", when background_gc is on, "gc_merge" option can be
set to let background GC thread to handle foreground GC requests,
it can eliminate the sluggish issue caused by slow foreground GC
operation when GC is triggered from a process with limited I/O
and CPU resources.
Original idea is from Xiang.
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In order to avoid race with f2fs_do_replace_block().
Fixes: f5a53edcf01e ("f2fs: support aligned pinned file")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If the alloc_type of the original curseg is LFS,
when we change_curseg and then do recover curseg,
the alloc_type becomes SSR.
Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
With the default DPOLICY_BG discard thread is ioaware, which prevents
the discard thread from issuing the discard commands. On low RAM setups,
it is observed that these discard commands in the cache are consuming
high memory. This patch aims to relax the memory pressure on the system
due to f2fs pending discard cmds by changing the policy to DPOLICY_FORCE
based on the nm_i->ram_thresh configured.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:
1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.
Previously, we only check valid chpt blocks in current segment rather
than section, fix it.
2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:
a) target segment has 'n' (n < 512) ckpt valid blocks
b) GC migrates 'n' valid blocks to other segment (segment is still
in dirty list)
c) GC migrates '512 - n' blocks to target segment (segment has 'n'
cp_vblocks and '512 - n' vblocks)
d) If GC selects target segment via {AT,}SSR allocator, however there
is no free space in targe segment.
Fixes: 4354994f097d ("f2fs: checkpoint disabling")
Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
AT_SSR mode is introduced by age threshold based GC for better
hot/cold data seperation and avoiding free segment cost. However,
LFS write mode is preferred in the scenario of foreground or high
urgent GC, which should be finished ASAP. Let's only use AT_SSR
in background GC and not high urgent GC modes.
Signed-off-by: Weichao Guo <guoweichao@oppo.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Now, fallocate() on a pinned file only allocates blocks which aligns
to segment rather than section, so GC may try to migrate pinned file's
block, and after several times of failure, pinned file's block could
be migrated to other place, however user won't be aware of such
condition, and then old obsolete block address may be readed/written
incorrectly.
To avoid such condition, let's try to allocate pinned file's blocks
with section alignment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In trim thread, let's add a condition to check discard command number
before traversing discard pending list, it can avoid unneeded traversing
if there is no discard command.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add more detailed comments for explicit memory barrier used by
f2fs, in order to enhance code readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
F2FS_IOC_FLUSH_DEVICE/F2FS_IOC_RESIZE_FS needs to migrate all blocks of
target segment to other place, no matter the segment has partially or fully
valid blocks.
However, after commit 803e74be04b3 ("f2fs: stop GC when the victim becomes
fully valid"), we may skip migration due to target segment is fully valid,
result in failing the ioctl interface, fix this.
Fixes: 803e74be04b3 ("f2fs: stop GC when the victim becomes fully valid")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
|
|
There are controlled by f2fs_freeze().
This fixes xfstests/generic/068 which is stuck at
task:f2fs_ckpt-252:3 state:D stack: 0 pid: 5761 ppid: 2 flags:0x00004000
Call Trace:
__schedule+0x44c/0x8a0
schedule+0x4f/0xc0
percpu_rwsem_wait+0xd8/0x140
? percpu_down_write+0xf0/0xf0
__percpu_down_read+0x56/0x70
issue_checkpoint_thread+0x12c/0x160 [f2fs]
? wait_woken+0x80/0x80
kthread+0x114/0x150
? __checkpoint_and_complete_reqs+0x110/0x110 [f2fs]
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch deprecates f2fs_trace_io, since f2fs uses page->private more broadly,
resulting in more buggy cases.
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use the blkdev_issue_flush helper instead of duplicating it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We will add a new "compress_mode" mount option to control file
compression mode. This supports "fs" and "user". In "fs" mode (default),
f2fs does automatic compression on the compression enabled files.
In "user" mode, f2fs disables the automaic compression and gives the
user discretion of choosing the target file and the timing. It means
the user can do manual compression/decompression on the compression
enabled files using ioctls.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
section is dirty, but dirty_secmap may not set
Reported-by: Jia Yang <jiayang5@huawei.com>
Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Lei Li reported a issue: if foreground operations are frequent, background
checkpoint may be always skipped due to below check, result in losing more
data after sudden power-cut.
f2fs_balance_fs_bg()
...
if (!is_idle(sbi, REQ_TIME) &&
(!excess_dirty_nats(sbi) && !excess_dirty_nodes(sbi)))
return;
E.g:
cp_interval = 5 second
idle_interval = 2 second
foreground operation interval = 1 second (append 1 byte per second into file)
In such case, no matter when it calls f2fs_balance_fs_bg(), is_idle(, REQ_TIME)
returns false, result in skipping background checkpoint.
This patch changes as below to make trigger condition being more reasonable:
- trigger sync_fs() if dirty_{nats,nodes} and prefree segs exceeds threshold;
- skip triggering sync_fs() if there is any background inflight IO or there is
foreground operation recently and meanwhile cp_rwsem is being held by someone;
Reported-by: Lei Li <noctis.akm@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch changes f2fs_flush_device_cache() to skip issuing flush for
nobarrier case.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
First problem is we hit BUG_ON() in f2fs_get_sum_page given EIO on
f2fs_get_meta_page_nofail().
Quick fix was not to give any error with infinite loop, but syzbot caught
a case where it goes to that loop from fuzzed image. In turned out we abused
f2fs_get_meta_page_nofail() like in the below call stack.
- f2fs_fill_super
- f2fs_build_segment_manager
- build_sit_entries
- get_current_sit_page
INFO: task syz-executor178:6870 can't die for more than 143 seconds.
task:syz-executor178 state:R
stack:26960 pid: 6870 ppid: 6869 flags:0x00004006
Call Trace:
Showing all locks held in the system:
1 lock held by khungtaskd/1179:
#0: ffffffff8a554da0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6242
1 lock held by systemd-journal/3920:
1 lock held by in:imklog/6769:
#0: ffff88809eebc130 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:930
1 lock held by syz-executor178/6870:
#0: ffff8880925120e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0x201/0xaf0 fs/super.c:229
Actually, we didn't have to use _nofail in this case, since we could return
error to mount(2) already with the error handler.
As a result, this patch tries to 1) remove _nofail callers as much as possible,
2) deal with error case in last remaining caller, f2fs_get_sum_page().
Reported-by: syzbot+ee250ac8137be41d7b13@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
After commit 0b6d4ca04a86 ("f2fs: don't return vmalloc() memory from
f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed
memory, so clean up to use kfree() instead of kvfree() to free
vmalloc()'ed memory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
then, we can add specified entry into rb-tree with 64-bits segment time
as key.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
