summaryrefslogtreecommitdiff
path: root/fs/file.c
AgeCommit message (Collapse)Author
2020-03-20io_uring: make sure openat/openat2 honor rlimit nofileJens Axboe
Dmitry reports that a test case shows that io_uring isn't honoring a modified rlimit nofile setting. get_unused_fd_flags() checks the task signal->rlimi[] for the limits. As this isn't easily inheritable, provide a __get_unused_fd_flags() that takes the value instead. Then we can grab it when the request is prepared (from the original task), and pass that in when we do the async part part of the open. Reported-by: Dmitry Kadashev <dkadashev@gmail.com> Tested-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29Merge tag 'threads-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread management updates from Christian Brauner: "Sargun Dhillon over the last cycle has worked on the pidfd_getfd() syscall. This syscall allows for the retrieval of file descriptors of a process based on its pidfd. A task needs to have ptrace_may_access() permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and Andy) on the target. One of the main use-cases is in combination with seccomp's user notification feature. As a reminder, seccomp's user notification feature was made available in v5.0. It allows a task to retrieve a file descriptor for its seccomp filter. The file descriptor is usually handed of to a more privileged supervising process. The supervisor can then listen for syscall events caught by the seccomp filter of the supervisee and perform actions in lieu of the supervisee, usually emulating syscalls. pidfd_getfd() is needed to expand its uses. There are currently two major users that wait on pidfd_getfd() and one future user: - Netflix, Sargun said, is working on a service mesh where users should be able to connect to a dns-based VIP. When a user connects to e.g. 1.2.3.4:80 that runs e.g. service "foo" they will be redirected to an envoy process. This service mesh uses seccomp user notifications and pidfd to intercept all connect calls and instead of connecting them to 1.2.3.4:80 connects them to e.g. 127.0.0.1:8080. - LXD uses the seccomp notifier heavily to intercept and emulate mknod() and mount() syscalls for unprivileged containers/processes. With pidfd_getfd() more uses-cases e.g. bridging socket connections will be possible. - The patchset has also seen some interest from the browser corner. Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a broker process. In the future glibc will start blocking all signals during dlopen() rendering this type of sandbox impossible. Hence, in the future Firefox will switch to a seccomp-user-nofication based sandbox which also makes use of file descriptor retrieval. The thread for this can be found at https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html With pidfd_getfd() it is e.g. possible to bridge socket connections for the supervisee (binding to a privileged port) and taking actions on file descriptors on behalf of the supervisee in general. Sargun's first version was using an ioctl on pidfds but various people pushed for it to be a proper syscall which he duely implemented as well over various review cycles. Selftests are of course included. I've also added instructions how to deal with merge conflicts below. There's also a small fix coming from the kernel mentee project to correctly annotate struct sighand_struct with __rcu to fix various sparse warnings. We've received a few more such fixes and even though they are mostly trivial I've decided to postpone them until after -rc1 since they came in rather late and I don't want to risk introducing build warnings. Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is needed to avoid allocation recursions triggerable by storage drivers that have userspace parts that run in the IO path (e.g. dm-multipath, iscsi, etc). These allocation recursions deadlock the device. The new prctl() allows such privileged userspace components to avoid allocation recursions by setting the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE flags. The patch carries the necessary acks from the relevant maintainers and is routed here as part of prctl() thread-management." * tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim sched.h: Annotate sighand_struct with __rcu test: Add test for pidfd getfd arch: wire up pidfd_getfd syscall pid: Implement pidfd_getfd syscall vfs, fdtable: Add fget_task helper
2020-01-20fs: move filp_close() outside of __close_fd_get_file()Jens Axboe
Just one caller of this, and just use filp_close() there manually. This is important to allow async close/removal of the fd. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-13vfs, fdtable: Add fget_task helperSargun Dhillon
This introduces a function which can be used to fetch a file, given an arbitrary task. As long as the user holds a reference (refcnt) to the task_struct it is safe to call, and will either return NULL on failure, or a pointer to the file, with a refcnt. This patch is based on Oleg Nesterov's (cf. [1]) patch from September 2018. [1]: Link: https://lore.kernel.org/r/20180915160423.GA31461@redhat.com Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200107175927.4558-2-sargun@sargun.me Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-02Revert "fs: remove ksys_dup()"Dominik Brodowski
This reverts commit 8243186f0cc7 ("fs: remove ksys_dup()") and the subsequent fix for it in commit 2d3145f8d280 ("early init: fix error handling when opening /dev/console"). Trying to use filp_open() and f_dupfd() instead of pseudo-syscalls caused more trouble than what is worth it: it requires accessing vfs internals and it turns out there were other bugs in it too. In particular, the file reference counting was wrong - because unlike the original "open+2*dup" sequence it used "filp_open+3*f_dupfd" and thus had an extra leaked file reference. That in turn then caused odd problems with Androidx86 long after boot becaue of how the extra reference to the console kept the session active even after all file descriptors had been closed. Reported-by: youling 257 <youling257@gmail.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-12fs: remove ksys_dup()Dominik Brodowski
ksys_dup() is used only at one place in the kernel, namely to duplicate fd 0 of /dev/console to stdout and stderr. The same functionality can be achieved by using functions already available within the kernel namespace. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-26Revert "vfs: properly and reliably lock f_pos in fdget_pos()"Linus Torvalds
This reverts commit 0be0ee71816b2b6725e2b4f32ad6726c9d729777. I was hoping it would be benign to switch over entirely to FMODE_STREAM, and we'd have just a couple of small fixups we'd need, but it looks like we're not quite there yet. While it worked fine on both my desktop and laptop, they are fairly similar in other respects, and run mostly the same loads. Kenneth Crudup reports that it seems to break both his vmware installation and the KDE upower service. In both cases apparently leading to timeouts due to waitinmg for the f_pos lock. There are a number of character devices in particular that definitely want stream-like behavior, but that currently don't get marked as streams, and as a result get the exclusion between concurrent read()/write() on the same file descriptor. Which doesn't work well for them. The most obvious example if this is /dev/console and /dev/tty, which use console_fops and tty_fops respectively (and ptmx_fops for the pty master side). It may be that it's just this that causes problems, but we clearly weren't ready yet. Because there's a number of other likely common cases that don't have llseek implementations and would seem to act as stream devices: /dev/fuse (fuse_dev_operations) /dev/mcelog (mce_chrdev_ops) /dev/mei0 (mei_fops) /dev/net/tun (tun_fops) /dev/nvme0 (nvme_dev_fops) /dev/tpm0 (tpm_fops) /proc/self/ns/mnt (ns_file_operations) /dev/snd/pcm* (snd_pcm_f_ops[]) and while some of these could be trivially automatically detected by the vfs layer when the character device is opened by just noticing that they have no read or write operations either, it often isn't that obvious. Some character devices most definitely do use the file position, even if they don't allow seeking: the firmware update code, for example, uses simple_read_from_buffer() that does use f_pos, but doesn't allow seeking back and forth. We'll revisit this when there's a better way to detect the problem and fix it (possibly with a coccinelle script to do more of the FMODE_STREAM annotations). Reported-by: Kenneth R. Crudup <kenny@panix.com> Cc: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-25vfs: properly and reliably lock f_pos in fdget_pos()Linus Torvalds
fdget_pos() is used by file operations that will read and update f_pos: things like "read()", "write()" and "lseek()" (but not, for example, "pread()/pwrite" that get their file positions elsewhere). However, it had two separate escape clauses for this, because not everybody wants or needs serialization of the file position. The first and most obvious case is the "file descriptor doesn't have a position at all", ie a stream-like file. Except we didn't actually use FMODE_STREAM, but instead used FMODE_ATOMIC_POS. The reason for that was that FMODE_STREAM didn't exist back in the days, but also that we didn't want to mark all the special cases, so we only marked the ones that _required_ position atomicity according to POSIX - regular files and directories. The case one was intentionally lazy, but now that we _do_ have FMODE_STREAM we could and should just use it. With the change to use FMODE_STREAM, there are no remaining uses for FMODE_ATOMIC_POS, and all the code to set it is deleted. Any cases where we don't want the serialization because the driver (or subsystem) doesn't use the file position should just be updated to do "stream_open()". We've done that for all the obvious and common situations, we may need a few more. Quoting Kirill Smelkov in the original FMODE_STREAM thread (see link below for full email): "And I appreciate if people could help at least somehow with "getting rid of mixed case entirely" (i.e. always lock f_pos_lock on !FMODE_STREAM), because this transition starts to diverge from my particular use-case too far. To me it makes sense to do that transition as follows: - convert nonseekable_open -> stream_open via stream_open.cocci; - audit other nonseekable_open calls and convert left users that truly don't depend on position to stream_open; - extend stream_open.cocci to analyze alloc_file_pseudo as well (this will cover pipes and sockets), or maybe convert pipes and sockets to FMODE_STREAM manually; - extend stream_open.cocci to analyze file_operations that use no_llseek or noop_llseek, but do not use nonseekable_open or alloc_file_pseudo. This might find files that have stream semantic but are opened differently; - extend stream_open.cocci to analyze file_operations whose .read/.write do not use ppos at all (independently of how file was opened); - ... - after that remove FMODE_ATOMIC_POS and always take f_pos_lock if !FMODE_STREAM; - gather bug reports for deadlocked read/write and convert missed cases to FMODE_STREAM, probably extending stream_open.cocci along the road to catch similar cases i.e. always take f_pos_lock unless a file is explicitly marked as being stream, and try to find and cover all files that are streams" We have not done the "extend stream_open.cocci to analyze alloc_file_pseudo" as well, but the previous commit did manually handle the case of pipes and sockets. The other case where we can avoid locking f_pos is the "this file descriptor only has a single user and it is us, and thus there is no need to lock it". The second test was correct, although a bit subtle and worth just re-iterating here. There are two kinds of other sources of references to the same file descriptor: file descriptors that have been explicitly shared across fork() or with dup(), and file tables having elevated reference counts due to threading (or explicit file sharing with clone()). The first case would have incremented the file count explicitly, and in the second case the previous __fdget() would have incremented it for us and set the FDPUT_FPUT flag. But in both cases the file count would be greater than one, so the "file_count(file) > 1" test catches both situations. Also note that if file_count is 1, that also means that no other thread can have access to the file table, so there also cannot be races with concurrent calls to dup()/fork()/clone() that would increment the file count any other way. Link: https://lore.kernel.org/linux-fsdevel/20190413184404.GA13490@deco.navytux.spb.ru Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Eic Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Marco Elver <elver@google.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Paul McKenney <paulmck@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-08Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring IO interface from Jens Axboe: "Second attempt at adding the io_uring interface. Since the first one, we've added basic unit testing of the three system calls, that resides in liburing like the other unit tests that we have so far. It'll take a while to get full coverage of it, but we're working towards it. I've also added two basic test programs to tools/io_uring. One uses the raw interface and has support for all the various features that io_uring supports outside of standard IO, like fixed files, fixed IO buffers, and polled IO. The other uses the liburing API, and is a simplified version of cp(1). This adds support for a new IO interface, io_uring. io_uring allows an application to communicate with the kernel through two rings, the submission queue (SQ) and completion queue (CQ) ring. This allows for very efficient handling of IOs, see the v5 posting for some basic numbers: https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/ Outside of just efficiency, the interface is also flexible and extendable, and allows for future use cases like the upcoming NVMe key-value store API, networked IO, and so on. It also supports async buffered IO, something that we've always failed to support in the kernel. Outside of basic IO features, it supports async polled IO as well. This particular feature has already been tested at Facebook months ago for flash storage boxes, with 25-33% improvements. It makes polled IO actually useful for real world use cases, where even basic flash sees a nice win in terms of efficiency, latency, and performance. These boxes were IOPS bound before, now they are not. This series adds three new system calls. One for setting up an io_uring instance (io_uring_setup(2)), one for submitting/completing IO (io_uring_enter(2)), and one for aux functions like registrating file sets, buffers, etc (io_uring_register(2)). Through the help of Arnd, I've coordinated the syscall numbers so merge on that front should be painless. Jon did a writeup of the interface a while back, which (except for minor details that have been tweaked) is still accurate. Find that here: https://lwn.net/Articles/776703/ Huge thanks to Al Viro for helping getting the reference cycle code correct, and to Jann Horn for his extensive reviews focused on both security and bugs in general. There's a userspace library that provides basic functionality for applications that don't need or want to care about how to fiddle with the rings directly. It has helpers to allow applications to easily set up an io_uring instance, and submit/complete IO through it without knowing about the intricacies of the rings. It also includes man pages (thanks to Jeff Moyer), and will continue to grow support helper functions and features as time progresses. Find it here: git://git.kernel.dk/liburing Fio has full support for the raw interface, both in the form of an IO engine (io_uring), but also with a small test application (t/io_uring) that can exercise and benchmark the interface" * tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block: io_uring: add a few test tools io_uring: allow workqueue item to handle multiple buffered requests io_uring: add support for IORING_OP_POLL io_uring: add io_kiocb ref count io_uring: add submission polling io_uring: add file set registration net: split out functions related to registering inflight socket files io_uring: add support for pre-mapped user IO buffers block: implement bio helper to add iter bvec pages to bio io_uring: batch io_kiocb allocation io_uring: use fget/fput_many() for file references fs: add fget_many() and fput_many() io_uring: support for IO polling io_uring: add fsync support Add io_uring IO interface
2019-03-05fs/file.c: initialize init_files.resize_waitShuriyc Chu
(Taken from https://bugzilla.kernel.org/show_bug.cgi?id=200647) 'get_unused_fd_flags' in kthread cause kernel crash. It works fine on 4.1, but causes crash after get 64 fds. It also cause crash on ubuntu1404/1604/1804, centos7.5, and the crash messages are almost the same. The crash message on centos7.5 shows below: start fd 61 start fd 62 start fd 63 BUG: unable to handle kernel NULL pointer dereference at (null) IP: __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: test(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter devlink sunrpc kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg ppdev pcspkr virtio_balloon parport_pc parport i2c_piix4 joydev ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi virtio_scsi virtio_console virtio_net cirrus drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm crct10dif_pclmul crct10dif_common crc32c_intel drm ata_piix serio_raw libata virtio_pci virtio_ring i2c_core virtio floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 1820 Comm: test_fd Kdump: loaded Tainted: G OE ------------ 3.10.0-862.3.3.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 task: ffff8e92b9431fa0 ti: ffff8e94247a0000 task.ti: ffff8e94247a0000 RIP: 0010:__wake_up_common+0x2e/0x90 RSP: 0018:ffff8e94247a2d18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffffffff9d09daa0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffff9d09daa0 RBP: ffff8e94247a2d50 R08: 0000000000000000 R09: ffff8e92b95dfda8 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9d09daa8 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8e9434e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000017c686000 CR4: 00000000000207e0 Call Trace: __wake_up+0x39/0x50 expand_files+0x131/0x250 __alloc_fd+0x47/0x170 get_unused_fd_flags+0x30/0x40 test_fd+0x12a/0x1c0 [test] kthread+0xd1/0xe0 ret_from_fork_nospec_begin+0x21/0x21 Code: 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 49 89 fc 49 83 c4 08 53 48 83 ec 10 48 8b 47 08 89 55 cc 4c 89 45 d0 <48> 8b 08 49 39 c4 48 8d 78 e8 4c 8d 69 e8 75 08 eb 3b 4c 89 ef RIP __wake_up_common+0x2e/0x90 RSP <ffff8e94247a2d18> CR2: 0000000000000000 This issue exists since CentOS 7.5 3.10.0-862 and CentOS 7.4 (3.10.0-693.21.1 ) is ok. Root cause: the item 'resize_wait' is not initialized before being used. Reported-by: Richard Zhang <zhang.zijian@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28fs: add fget_many() and fput_many()Jens Axboe
Some uses cases repeatedly get and put references to the same file, but the only exposed interface is doing these one at the time. As each of these entail an atomic inc or dec on a shared structure, that cost can add up. Add fget_many(), which works just like fget(), except it takes an argument for how many references to get on the file. Ditto fput_many(), which can drop an arbitrary number of references to a file. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-28Merge tag 'char-misc-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc driver patches for 4.21-rc1. Lots of different types of driver things in here, as this tree seems to be the "collection of various driver subsystems not big enough to have their own git tree" lately. Anyway, some highlights of the changes in here: - binderfs: is it a rule that all driver subsystems will eventually grow to have their own filesystem? Binder now has one to handle the use of it in containerized systems. This was discussed at the Plumbers conference a few months ago and knocked into mergable shape very fast by Christian Brauner. Who also has signed up to be another binder maintainer, showing a distinct lack of good judgement :) - binder updates and fixes - mei driver updates - fpga driver updates and additions - thunderbolt driver updates - soundwire driver updates - extcon driver updates - nvmem driver updates - hyper-v driver updates - coresight driver updates - pvpanic driver additions and reworking for more device support - lp driver updates. Yes really, it's _finally_ moved to the proper parallal port driver model, something I never thought I would see happen. Good stuff. - other tiny driver updates and fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits) MAINTAINERS: add another Android binder maintainer intel_th: msu: Fix an off-by-one in attribute store stm class: Add a reference to the SyS-T document stm class: Fix a module refcount leak in policy creation error path char: lp: use new parport device model char: lp: properly count the lp devices char: lp: use first unused lp number while registering char: lp: detach the device when parallel port is removed char: lp: introduce list to save port number bus: qcom: remove duplicated include from qcom-ebi2.c VMCI: Use memdup_user() rather than duplicating its implementation char/rtc: Use of_node_name_eq for node name comparisons misc: mic: fix a DMA pool free failure ptp: fix an IS_ERR() vs NULL check genwqe: Fix size check binder: implement binderfs binder: fix use-after-free due to ksys_close() during fdget() bus: fsl-mc: remove duplicated include files bus: fsl-mc: explicitly define the fsl_mc_command endianness misc: ti-st: make array read_ver_cmd static, shrinks object size ...
2018-12-19binder: fix use-after-free due to ksys_close() during fdget()Todd Kjos
44d8047f1d8 ("binder: use standard functions to allocate fds") exposed a pre-existing issue in the binder driver. fdget() is used in ksys_ioctl() as a performance optimization. One of the rules associated with fdget() is that ksys_close() must not be called between the fdget() and the fdput(). There is a case where this requirement is not met in the binder driver which results in the reference count dropping to 0 when the device is still in use. This can result in use-after-free or other issues. If userpace has passed a file-descriptor for the binder driver using a BINDER_TYPE_FDA object, then kys_close() is called on it when handling a binder_ioctl(BC_FREE_BUFFER) command. This violates the assumptions for using fdget(). The problem is fixed by deferring the close using task_work_add(). A new variant of __close_fd() was created that returns a struct file with a reference. The fput() is deferred instead of using ksys_close(). Fixes: 44d8047f1d87a ("binder: use standard functions to allocate fds") Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27fs/file: Replace synchronize_sched() with synchronize_rcu()Paul E. McKenney
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <linux-fsdevel@vger.kernel.org>
2018-04-02fs: add ksys_close() wrapper; remove in-kernel calls to sys_close()Dominik Brodowski
Using the ksys_close() wrapper allows us to get rid of in-kernel calls to the sys_close() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_close(), with one subtle difference: The few places which checked the return value did not care about the return value re-writing in sys_close(), so simply use a wrapper around __close_fd(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_dup{,3}() helper; remove in-kernel calls to sys_dup{,3}()Dominik Brodowski
Using ksys_dup() and ksys_dup3() as helper functions allows us to avoid the in-kernel calls to the sys_dup() and sys_dup3() syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_dup{,3}(). In the near future, the fs-external callers of ksys_dup{,3}() should be converted to call do_dup2() directly. Then, ksys_dup{,3}() can be moved within sys_dup{,3}() again. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-01-31Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "All kinds of misc stuff, without any unifying topic, from various people. Neil's d_anon patch, several bugfixes, introduction of kvmalloc analogue of kmemdup_user(), extending bitfield.h to deal with fixed-endians, assorted cleanups all over the place..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits) alpha: osf_sys.c: use timespec64 where appropriate alpha: osf_sys.c: fix put_tv32 regression jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path dcache: delete unused d_hash_mask dcache: subtract d_hash_shift from 32 in advance fs/buffer.c: fold init_buffer() into init_page_buffers() fs: fold __inode_permission() into inode_permission() fs: add RWF_APPEND sctp: use vmemdup_user() rather than badly open-coding memdup_user() snd_ctl_elem_init_enum_names(): switch to vmemdup_user() replace_user_tlv(): switch to vmemdup_user() new primitive: vmemdup_user() memdup_user(): switch to GFP_USER eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget() eventfd: fold eventfd_ctx_read() into eventfd_read() eventfd: convert to use anon_inode_getfd() nfs4file: get rid of pointless include of btrfs.h uvc_v4l2: clean copyin/copyout up vme_user: don't use __copy_..._user() usx2y: don't bother with memdup_user() for 16-byte structure ...
2017-12-05fs/file.c: trim includesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-04fs: Eliminate cond_resched_rcu_qs() in favor of cond_resched()Paul E. McKenney
Now that cond_resched() also provides RCU quiescent states when needed, it can be used in place of cond_resched_rcu_qs(). This commit therefore makes this change. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <linux-fsdevel@vger.kernel.org>
2017-11-17Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff, really no common topic here" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: grab the lock instead of blocking in __fd_install during resizing vfs: stop clearing close on exec when closing a fd include/linux/fs.h: fix comment about struct address_space fs: make fiemap work from compat_ioctl coda: fix 'kernel memory exposure attempt' in fsync pstore: remove unneeded unlikely() vfs: remove unneeded unlikely() stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case make vfs_ustat() static do_handle_open() should be static elf_fdpic: fix unused variable warning fold destroy_super() into __put_super() new helper: destroy_unused_super() fix address space warnings in ipc/ acct.h: get rid of detritus
2017-11-05vfs: grab the lock instead of blocking in __fd_install during resizingMateusz Guzik
Explicit locking in the fallback case provides a safe state of the table. Getting rid of blocking semantics makes __fd_install usable again in non-sleepable contexts, which easies backporting efforts. There is a side effect of slightly nicer assembly for the common case as might_sleep can now be removed. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-05vfs: stop clearing close on exec when closing a fdMateusz Guzik
Codepaths allocating a fd always make sure the bit is set/unset depending on flags, thus clearing on close is redundant. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-06fs/file.c: replace alloc_fdmem() with kvmalloc() alternativeMichal Hocko
There is no real reason to duplicate kvmalloc* helpers so drop alloc_fdmem and replace it with the appropriate library function. Link: http://lkml.kernel.org/r/20170531155145.17111-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08mm, vmalloc: use __GFP_HIGHMEM implicitlyMichal Hocko
__vmalloc* allows users to provide gfp flags for the underlying allocation. This API is quite popular $ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l 77 The only problem is that many people are not aware that they really want to give __GFP_HIGHMEM along with other flags because there is really no reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages which are mapped to the kernel vmalloc space. About half of users don't use this flag, though. This signals that we make the API unnecessarily too complex. This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM are simplified and drop the flag. Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Cristopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-27fs/file: more unsigned file descriptorsAlexey Dobriyan
Propagate unsignedness for grand total of 149 bytes: $ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux add/remove: 0/0 grow/shrink: 0/10 up/down: 0/-149 (-149) function old new delta set_close_on_exec 99 98 -1 put_files_struct 201 200 -1 get_close_on_exec 59 58 -1 do_prlimit 498 497 -1 do_execveat_common.isra 1662 1661 -1 __close_fd 178 173 -5 do_dup2 219 204 -15 seq_show 685 660 -25 __alloc_fd 384 357 -27 dup_fd 718 646 -72 It mostly comes from converting "unsigned int" to "long" for bit operations. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-02give readdir(2)/getdents(2)/etc. uniform exclusion with lseek()Al Viro
same as read() on regular files has, and for the same reason. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-14kmemcg: account certain kmem allocations to memcgVladimir Davydov
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-06fs/file.c: __const_max is actually __const_min :-)Rasmus Villemoes
7f4b36f9bb930 "get rid of files_defer_init()" inexplicably changed a min() to a __const_max() - but the __const_max macro actually gives the minimum... So no functional change, just less confusing naming. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-05vfs: clear remainder of 'full_fds_bits' in dup_fd()Eric Biggers
This fixes a bug from commit f3f86e33dc3d ("vfs: Fix pathological performance case for __alloc_fd()"). v2: refactor to share fd bitmap copying code Signed-off-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-31vfs: conditionally clear close-on-exec flagLinus Torvalds
We clear the close-on-exec flag when opening and closing files, and the bit was almost always already clear before. Avoid dirtying the cacheline if the clearning isn't necessary. That avoids unnecessary cacheline dirtying and bouncing in multi-socket environments. Eric Dumazet has a file descriptor benchmark that goes 4% faster from this on his two-socket machine. It's probably partly superlinear improvement due to getting slightly less spinlock contention on the file_lock spinlock due to less work in the critical section. Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-31vfs: Fix pathological performance case for __alloc_fd()Linus Torvalds
Al Viro points out that: > > * [Linux-specific aside] our __alloc_fd() can degrade quite badly > > with some use patterns. The cacheline pingpong in the bitmap is probably > > inevitable, unless we accept considerably heavier memory footprint, > > but we also have a case when alloc_fd() takes O(n) and it's _not_ hard > > to trigger - close(3);open(...); will have the next open() after that > > scanning the entire in-use bitmap. And Eric Dumazet has a somewhat realistic multithreaded microbenchmark that opens and closes a lot of sockets with minimal work per socket. This patch largely fixes it. We keep a 2nd-level bitmap of the open file bitmaps, showing which words are already full. So then we can traverse that second-level bitmap to efficiently skip already allocated file descriptors. On his benchmark, this improves performance by up to an order of magnitude, by avoiding the excessive open file bitmap scanning. Tested-and-acked-by: Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-01fs/file.c: __fget() and dup2() atomicity rulesEric Dumazet
__fget() does lockless fetch of pointer from the descriptor table, attempts to grab a reference and treats "it was already zero" as "it's already gone from the table, we just hadn't seen the store, let's fail". Unfortunately, that breaks the atomicity of dup2() - __fget() might see the old pointer, notice that it's been already dropped and treat that as "it's closed". What we should be getting is either the old file or new one, depending whether we come before or after dup2(). Dmitry had following test failing sometimes : int fd; void *Thread(void *x) { char buf; int n = read(fd, &buf, 1); if (n != 1) exit(printf("read failed: n=%d errno=%d\n", n, errno)); return 0; } int main() { fd = open("/dev/urandom", O_RDONLY); int fd2 = open("/dev/urandom", O_RDONLY); if (fd == -1 || fd2 == -1) exit(printf("open failed\n")); pthread_t th; pthread_create(&th, 0, Thread, 0); if (dup2(fd2, fd) == -1) exit(printf("dup2 failed\n")); pthread_join(th, 0); if (close(fd) == -1) exit(printf("close failed\n")); if (close(fd2) == -1) exit(printf("close failed\n")); printf("DONE\n"); return 0; } Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-01fs/file.c: don't acquire files->file_lock in fd_install()Eric Dumazet
Mateusz Guzik reported : Currently obtaining a new file descriptor results in locking fdtable twice - once in order to reserve a slot and second time to fill it. Holding the spinlock in __fd_install() is needed in case a resize is done, or to prevent a resize. Mateusz provided an RFC patch and a micro benchmark : http://people.redhat.com/~mguzik/pipebench.c A resize is an unlikely operation in a process lifetime, as table size is at least doubled at every resize. We can use RCU instead of the spinlock. __fd_install() must wait if a resize is in progress. The resize must block new __fd_install() callers from starting, and wait that ongoing install are finished (synchronize_sched()) resize should be attempted by a single thread to not waste resources. rcu_sched variant is used, as __fd_install() and expand_fdtable() run from process context. It gives us a ~30% speedup using pipebench on a dual Intel(R) Xeon(R) CPU E5-2696 v2 @ 2.50GHz Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Mateusz Guzik <mguzik@redhat.com> Acked-by: Mateusz Guzik <mguzik@redhat.com> Tested-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-17mm: rcu-protected get_mm_exe_file()Konstantin Khlebnikov
This patch removes mm->mmap_sem from mm->exe_file read side. Also it kills dup_mm_exe_file() and moves exe_file duplication into dup_mmap() where both mmap_sems are locked. [akpm@linux-foundation.org: fix comment typo] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10fs/file.c: replace get_unused_fd() with get_unused_fd_flags(0)Yann Droneaud
This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - changes related to No-CBs CPUs and NO_HZ_FULL - RCU-tasks implementation - torture-test updates - miscellaneous fixes - locktorture updates - RCU documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) workqueue: Use cond_resched_rcu_qs macro workqueue: Add quiescent state between work items locktorture: Cleanup header usage locktorture: Cannot hold read and write lock locktorture: Fix __acquire annotation for spinlock irq locktorture: Support rwlocks rcu: Eliminate deadlock between CPU hotplug and expedited grace periods locktorture: Document boot/module parameters rcutorture: Rename rcutorture_runnable parameter locktorture: Add test scenario for rwsem_lock locktorture: Add test scenario for mutex_lock locktorture: Make torture scripting account for new _runnable name locktorture: Introduce torture context locktorture: Support rwsems locktorture: Add infrastructure for torturing read locks torture: Address race in module cleanup locktorture: Make statistics generic locktorture: Teach about lock debugging locktorture: Support mutexes locktorture: Add documentation ...
2014-10-09missing annotation in fs/file.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-07rcu: Provide cond_resched_rcu_qs() to force quiescent states in long loopsPaul E. McKenney
RCU-tasks requires the occasional voluntary context switch from CPU-bound in-kernel tasks. In some cases, this requires instrumenting cond_resched(). However, there is some reluctance to countenance unconditionally instrumenting cond_resched() (see http://lwn.net/Articles/603252/), so this commit creates a separate cond_resched_rcu_qs() that may be used in place of cond_resched() in locations prone to long-duration in-kernel looping. This commit currently instruments only RCU-tasks. Future possibilities include also instrumenting RCU, RCU-bh, and RCU-sched in order to reduce IPI usage. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-05-06fs/file.c: don't open-code kvfree()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-01get rid of files_defer_init()Al Viro
the only thing it's doing these days is calculation of upper limit for fs.nr_open sysctl and that can be done statically Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-31Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "Main changes: - Torture-test changes, including refactoring of rcutorture and introduction of a vestigial locktorture. - Real-time latency fixes. - Documentation updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) rcu: Provide grace-period piggybacking API rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c notifier: Substitute rcu_access_pointer() for rcu_dereference_raw() Documentation/memory-barriers.txt: Clarify release/acquire ordering rcutorture: Save kvm.sh output to log rcutorture: Add a lock_busted to test the test rcutorture: Place kvm-test-1-run.sh output into res directory rcutorture: Rename TREE_RCU-Kconfig.txt locktorture: Add kvm-recheck.sh plug-in for locktorture rcutorture: Gracefully handle NULL cleanup hooks locktorture: Add vestigial locktorture configuration rcutorture: Introduce "rcu" directory level underneath configs rcutorture: Rename kvm-test-1-rcu.sh rcutorture: Remove RCU dependencies from ver_functions.sh API rcutorture: Create CFcommon file for common Kconfig parameters rcutorture: Create config files for scripted test-the-test testing rcutorture: Add an rcu_busted to test the test locktorture: Add a lock-torture kernel module rcutorture: Abstract kvm-recheck.sh ...
2014-03-23vfs: Don't let __fdget_pos() get FMODE_PATH filesEric Biggers
Commit bd2a31d522344 ("get rid of fget_light()") introduced the __fdget_pos() function, which returns the resulting file pointer and fdput flags combined in an 'unsigned long'. However, it also changed the behavior to return files with FMODE_PATH set, which shouldn't happen because read(), write(), lseek(), etc. aren't allowed on such files. This commit restores the old behavior. This regression actually had no effect on read() and write() since FMODE_READ and FMODE_WRITE are not set on file descriptors opened with O_PATH, but it did cause lseek() on a file descriptor opened with O_PATH to fail with ESPIPE rather than EBADF. Signed-off-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-10get rid of fget_light()Al Viro
instead of returning the flags by reference, we can just have the low-level primitive return those in lower bits of unsigned long, with struct file * derived from the rest. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-17fs: Substitute rcu_access_pointer() for rcu_dereference_raw()Paul E. McKenney
(Trivial patch.) If the code is looking at the RCU-protected pointer itself, but not dereferencing it, the rcu_dereference() functions can be downgraded to rcu_access_pointer(). This commit makes this downgrade in __alloc_fd(), which simply compares the RCU-protected pointer against NULL with no dereferencing. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-10fs/file.c:fdtable: avoid triggering OOMs from alloc_fdmemEric W. Biederman
Recently due to a spike in connections per second memcached on 3 separate boxes triggered the OOM killer from accept. At the time the OOM killer was triggered there was 4GB out of 36GB free in zone 1. The problem was that alloc_fdtable was allocating an order 3 page (32KiB) to hold a bitmap, and there was sufficient fragmentation that the largest page available was 8KiB. I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious but I do agree that order 3 allocations are very likely to succeed. There are always pathologies where order > 0 allocations can fail when there are copious amounts of free memory available. Using the pigeon hole principle it is easy to show that it requires 1 page more than 50% of the pages being free to guarantee an order 1 (8KiB) allocation will succeed, 1 page more than 75% of the pages being free to guarantee an order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of the pages being free to guarantee an order 3 allocate will succeed. A server churning memory with a lot of small requests and replies like memcached is a common case that if anything can will skew the odds against large pages being available. Therefore let's not give external applications a practical way to kill linux server applications, and specify __GFP_NORETRY to the kmalloc in alloc_fdmem. Unless I am misreading the code and by the time the code reaches should_alloc_retry in __alloc_pages_slowpath (where __GFP_NORETRY becomes signification). We have already tried everything reasonable to allocate a page and the only thing left to do is wait. So not waiting and falling back to vmalloc immediately seems like the reasonable thing to do even if there wasn't a chance of triggering the OOM killer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-25fs: __fget_light() can use __fget() in slow pathOleg Nesterov
The slow path in __fget_light() can use __fget() to avoid the code duplication. Saves 232 bytes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25fs: factor out common code in fget_light() and fget_raw_light()Oleg Nesterov
Apart from FMODE_PATH check fget_light() and fget_raw_light() are identical, shift the code into the new helper, __fget_light(fd, mask). Saves 208 bytes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>