| Age | Commit message (Collapse) | Author |
|---|
|
Before this patch, journal inodes were considered regular inodes,
which meant that instead of evicting them, function iput_final would
just put them on the lru for later processing. If the file system
withdrew for whatever reason, the withdraw would never be seen until
the inode was evicted, which could be indefinitely.
This patch marks all journal inodes as "don't cache" which means
function iput_final will evict them immediately, allowing us to
properly recover the journal on other cluster nodes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, several functions in gfs2 related to the updating
of the statfs file used a newly acquired/read buffer_head for the
local statfs file. This is completely unnecessary, because other nodes
should never update it. Recreating the buffer is a waste of time.
This patch allows gfs2 to read in the local statefs buffer_head at
mount time and keep it around until unmount time.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Patch 96b1454f2e ("gfs2: move freeze glock outside the make_fs_rw and _ro
functions") changed the gfs2 mount sequence so that it holds the freeze
lock before calling gfs2_make_fs_rw. Before this patch, gfs2_make_fs_rw
called init_threads to initialize the quotad and logd threads. That is a
problem if the system needs to withdraw due to IO errors early in the
mount sequence, for example, while initializing the system statfs inode:
1. An IO error causes the statfs glock to not sync properly after
recovery, and leaves items on the ail list.
2. The leftover items on the ail list causes its do_xmote call to fail,
which makes it want to withdraw. But since the glock code cannot
withdraw (because the withdraw sequence uses glocks) it relies upon
the logd daemon to initiate the withdraw.
3. The withdraw can never be performed by the logd daemon because all
this takes place before the logd daemon is started.
This patch moves function init_threads from super.c to ops_fstype.c
and it changes gfs2_fill_super to start its threads before holding the
freeze lock, and if there's an error, stop its threads after releasing
it. This allows the logd to run unblocked by the freeze lock. Thus,
the logd daemon can perform its withdraw sequence properly.
Fixes: 96b1454f2e8e ("gfs2: move freeze glock outside the make_fs_rw and _ro functions")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
In the case where IS_ERR(lsi->si_sc_inode) is true the error exit path
to free_local does not kfree the allocated object lsi leading to a memory
leak. Fix this by kfree'ing lst before taking the error exit path.
Addresses-Coverity: ("Resource leak")
Fixes: 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
On an error path, init_statfs calls iput(pn) after pn has already been put.
Fix that by setting pn to NULL after the initial iput.
Fixes: 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
Cc: stable@vger.kernel.org # v5.10+
Reported-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Building the kernel with W=1 results in a number of kernel-doc warnings
like incorrect function names and parameter descriptions. Fix those,
mostly by adding missing parameter descriptions, removing left-over
descriptions, and demoting some less important kernel-doc comments into
regular comments.
Originally proposed by Lee Jones; improved and combined into a single
patch by Andreas.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
It fixes the following warning detected by coccinelle:
./fs/gfs2/super.c:592:5-10: Unneeded variable: "error". Return "0" on
line 628
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git
Merge the resource group glock sharing feature and the revoke accounting rework.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In the log, revokes are stored as a revoke descriptor (struct
gfs2_log_descriptor), followed by zero or more additional revoke blocks
(struct gfs2_meta_header). On filesystems with a blocksize of 4k, the
revoke descriptor contains up to 503 revokes, and the metadata blocks
contain up to 509 revokes each. We've so far been reserving space for
revokes in transactions in block granularity, so a lot more space than
necessary was being allocated and then released again.
This patch switches to assigning revokes to transactions individually
instead. Initially, space for the revoke descriptor is reserved and
handed out to transactions. When more revokes than that are reserved,
additional revoke blocks are added. When the log is flushed, the space
for the additional revoke blocks is released, but we keep the space for
the revoke descriptor block allocated.
Transactions may still reserve more revokes than they will actually need
in the end, but now we won't overshoot the target as much, and by only
returning the space for excess revokes at log flush time, we further
reduce the amount of contention between processes.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add support for an additional filesystem version (sb_fs_format = 1802).
When a filesystem with the new version is mounted, the filesystem
supports "trusted.*" xattrs.
In addition, version 1802 filesystems implement a form of forward
compatibility for xattrs: when xattrs with an unknown prefix (ea_type)
are found on a version 1802 filesystem, those attributes are not shown
by listxattr, and they are not accessible by getxattr, setxattr, or
removexattr.
This mechanism might turn out to be what we need in the future, but if
not, we can always bump the filesystem version and break compatibility
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
|
|
Turn on rgrplvb by default for sb_fs_format > 1801.
Mount options still have to override this so a new args field to
differentiate between 'off' and 'not specified' is added, and the new
default is applied only when it's not specified.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This counter and the associated wait queue are only used so that
gfs2_make_fs_ro can efficiently wait for all pending log space
allocations to fail after setting the filesystem to read-only. This
comes at the cost of waking up that wait queue very frequently.
Instead, when gfs2_log_reserve fails because the filesystem has become
read-only, Wake up sd_log_waitq. In gfs2_make_fs_ro, set the file
system read-only and then wait until all the log space has been
released. Give up and report the problem after a while. With that,
sd_reserving_log and sd_reserving_log_wait can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, sister functions gfs2_make_fs_rw and gfs2_make_fs_ro locked
(held) the freeze glock by calling gfs2_freeze_lock and gfs2_freeze_unlock.
The problem is, not all the callers of gfs2_make_fs_ro should be doing this.
The three callers of gfs2_make_fs_ro are: remount (gfs2_reconfigure),
signal_our_withdraw, and unmount (gfs2_put_super). But when unmounting the
file system we can get into the following circular lock dependency:
deactivate_super
down_write(&s->s_umount); <-------------------------------------- s_umount
deactivate_locked_super
gfs2_kill_sb
kill_block_super
generic_shutdown_super
gfs2_put_super
gfs2_make_fs_ro
gfs2_glock_nq_init sd_freeze_gl
freeze_go_sync
if (freeze glock in SH)
freeze_super (vfs)
down_write(&sb->s_umount); <------- s_umount
This patch moves the hold of the freeze glock outside the two sister rw/ro
functions to their callers, but it doesn't request the glock from
gfs2_put_super, thus eliminating the circular dependency.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Many places in the gfs2 code queued and dequeued the freeze glock.
Almost all of them acquire it in SHARED mode, and need to specify the
same LM_FLAG_NOEXP and GL_EXACT flags.
This patch adds common helper functions gfs2_freeze_lock and gfs2_freeze_unlock
to make the code more readable, and to prepare for the next patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before commit 97fd734ba17e, the local statfs_changeX inode was never
initialized for spectator mounts. However, it still checks for
spectator mounts when unmounting everything. There's no good reason to
lookup the statfs_changeX files because spectators cannot perform recovery.
It still, however, needs the master statfs file for statfs calls.
This patch adds the check for spectator mounts to init_statfs.
Fixes: 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Hi,
Before this patch, function init_journal's "undo" directive jumped to label
fail_jinode_gh. But now that it does statfs initialization, it needs to
jump to fail_statfs instead. Failure to do so means that mount failures
after init_journal is successful will neglect to let go of the proper
statfs information, stranding the statfs_changeX inodes. This makes it
impossible to free its glocks, and results in:
gfs2: fsid=sda.s: G: s:EX n:2/805f f:Dqob t:EX d:UN/603701000 a:0 v:0 r:4 m:200 p:1
gfs2: fsid=sda.s: H: s:EX f:H e:0 p:1397947 [(ended)] init_journal+0x548/0x890 [gfs2]
gfs2: fsid=sda.s: I: n:6/32863 t:8 f:0x00 d:0x00000201 s:24 p:0
gfs2: fsid=sda.s: G: s:SH n:5/805f f:Dqob t:SH d:UN/603712000 a:0 v:0 r:3 m:200 p:0
gfs2: fsid=sda.s: H: s:SH f:EH e:0 p:1397947 [(ended)] gfs2_inode_lookup+0x1fb/0x410 [gfs2]
VFS: Busy inodes after unmount of sda. Self-destruct in 5 seconds. Have a nice day...
The next time the file system is mounted, it then reuses the same glocks,
which ends in a kernel NULL pointer dereference when trying to dump the
reused glock.
This patch makes the "undo" function of init_journal jump to fail_statfs
so the statfs files are properly deconstructed upon failure.
Fixes: 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In gfs2_check_sb(), no validation checks are performed with regards to
the size of the superblock.
syzkaller detected a slab-out-of-bounds bug that was primarily caused
because the block size for a superblock was set to zero.
A valid size for a superblock is a power of 2 between 512 and PAGE_SIZE.
Performing validation checks and ensuring that the size of the superblock
is valid fixes this bug.
Reported-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Tested-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Suggested-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
[Minor code reordering.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
syzkaller found the following splat with CONFIG_DEBUG_KOBJECT_RELEASE=y:
Read of size 1 at addr ffff000028e896b8 by task kworker/1:2/228
CPU: 1 PID: 228 Comm: kworker/1:2 Tainted: G S 5.9.0-rc8+ #101
Hardware name: linux,dummy-virt (DT)
Workqueue: events kobject_delayed_cleanup
Call trace:
dump_backtrace+0x0/0x4d8
show_stack+0x34/0x48
dump_stack+0x174/0x1f8
print_address_description.constprop.0+0x5c/0x550
kasan_report+0x13c/0x1c0
__asan_report_load1_noabort+0x34/0x60
memcmp+0xd0/0xd8
gfs2_uevent+0xc4/0x188
kobject_uevent_env+0x54c/0x1240
kobject_uevent+0x2c/0x40
__kobject_del+0x190/0x1d8
kobject_delayed_cleanup+0x2bc/0x3b8
process_one_work+0x96c/0x18c0
worker_thread+0x3f0/0xc30
kthread+0x390/0x498
ret_from_fork+0x10/0x18
Allocated by task 1110:
kasan_save_stack+0x28/0x58
__kasan_kmalloc.isra.0+0xc8/0xe8
kasan_kmalloc+0x10/0x20
kmem_cache_alloc_trace+0x1d8/0x2f0
alloc_super+0x64/0x8c0
sget_fc+0x110/0x620
get_tree_bdev+0x190/0x648
gfs2_get_tree+0x50/0x228
vfs_get_tree+0x84/0x2e8
path_mount+0x1134/0x1da8
do_mount+0x124/0x138
__arm64_sys_mount+0x164/0x238
el0_svc_common.constprop.0+0x15c/0x598
do_el0_svc+0x60/0x150
el0_svc+0x34/0xb0
el0_sync_handler+0xc8/0x5b4
el0_sync+0x15c/0x180
Freed by task 228:
kasan_save_stack+0x28/0x58
kasan_set_track+0x28/0x40
kasan_set_free_info+0x24/0x48
__kasan_slab_free+0x118/0x190
kasan_slab_free+0x14/0x20
slab_free_freelist_hook+0x6c/0x210
kfree+0x13c/0x460
Use the same pattern as f2fs + ext4 where the kobject destruction must
complete before allowing the FS itself to be freed. This means that we
need an explicit free_sbd in the callers.
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[Also go to fail_free when init_names fails.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP
(Do not freeze) flag, and some did not. We never want to freeze the freeze
glock, so this patch makes it consistently use LM_FLAG_NOEXP always.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, a simple typo accidentally added \n to the jid=
string for lock_nolock mounts. This made it impossible to mount a
gfs2 file system with a journal other than journal0. Thus:
mount -tgfs2 -o hostdata="jid=1" <device> <mount pt>
Resulted in:
mount: wrong fs type, bad option, bad superblock on <device>
In most cases this is not a problem. However, for debugging and
testing purposes we sometimes want to test the integrity of other
journals. This patch removes the unnecessary \n and thus allows
lock_nolock users to specify an alternate journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got a lot of patches (39) for this merge window. Most of these
patches are related to corruption that occurs when journals are
replayed. For example:
1. A node fails while writing to the file system.
2. Other nodes use the metadata that was once used by the failed
node.
3. When the node returns to the cluster, its journal is replayed, but
the older metadata blocks overwrite the changes from step 2.
Summary:
- Fixed the recovery sequence to prevent corruption during journal
replay.
- Many bug fixes found during recovery testing.
- New improved file system withdraw sequence.
- Fixed how resource group buffers are managed.
- Fixed how metadata revokes are tracked and written.
- Improve processing of IO errors hit by daemons like logd and
quotad.
- Improved error checking in metadata writes.
- Fixed how qadata quota data structures are managed"
* tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (39 commits)
gfs2: Fix oversight in gfs2_ail1_flush
gfs2: change from write to read lock for sd_log_flush_lock in journal replay
gfs2: instrumentation wrt ail1 stuck
gfs2: don't lock sd_log_flush_lock in try_rgrp_unlink
gfs2: Remove unnecessary gfs2_qa_{get,put} pairs
gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put
gfs2: Change inode qa_data to allow multiple users
gfs2: eliminate gfs2_rsqa_alloc in favor of gfs2_qa_alloc
gfs2: Switch to list_{first,last}_entry
gfs2: Clean up inode initialization and teardown
gfs2: Additional information when gfs2_ail1_flush withdraws
gfs2: leaf_dealloc needs to allocate one more revoke
gfs2: allow journal replay to hold sd_log_flush_lock
gfs2: don't allow releasepage to free bd still used for revokes
gfs2: flesh out delayed withdraw for gfs2_log_flush
gfs2: Do proper error checking for go_sync family of glops functions
gfs2: Don't demote a glock until its revokes are written
gfs2: drain the ail2 list after io errors
gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails
gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty
...
|
|
Before this patch, function check_journal_clean would give messages
related to journal recovery. That's fine for mount time, but when a
node withdraws and forces replay that way, we don't want all those
distracting and misleading messages. This patch adds a new parameter
to make those messages optional.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When a node withdraws from a file system, it often leaves its journal
in an incomplete state. This is especially true when the withdraw is
caused by io errors writing to the journal. Before this patch, a
withdraw would try to write a "shutdown" record to the journal, tell
dlm it's done with the file system, and none of the other nodes
know about the problem. Later, when the problem is fixed and the
withdrawn node is rebooted, it would then discover that its own
journal was incomplete, and replay it. However, replaying it at this
point is almost guaranteed to introduce corruption because the other
nodes are likely to have used affected resource groups that appeared
in the journal since the time of the withdraw. Replaying the journal
later will overwrite any changes made, and not through any fault of
dlm, which was instructed during the withdraw to release those
resources.
This patch makes file system withdraws seen by the entire cluster.
Withdrawing nodes dequeue their journal glock to allow recovery.
The remaining nodes check all the journals to see if they are
clean or in need of replay. They try to replay dirty journals, but
only the journals of withdrawn nodes will be "not busy" and
therefore available for replay.
Until the journal replay is complete, no i/o related glocks may be
given out, to ensure that the replay does not cause the
aforementioned corruption: We cannot allow any journal replay to
overwrite blocks associated with a glock once it is held.
The "live" glock which is now used to signal when a withdraw
occurs. When a withdraw occurs, the node signals its withdraw by
dequeueing the "live" glock and trying to enqueue it in EX mode,
thus forcing the other nodes to all see a demote request, by way
of a "1CB" (one callback) try lock. The "live" glock is not
granted in EX; the callback is only just used to indicate a
withdraw has occurred.
Note that all nodes in the cluster must wait for the recovering
node to finish replaying the withdrawing node's journal before
continuing. To this end, it checks that the journals are clean
multiple times in a retry loop.
Also note that the withdraw function may be called from a wide
variety of situations, and therefore, we need to take extra
precautions to make sure pointers are valid before using them in
many circumstances.
We also need to take care when glocks decide to withdraw, since
the withdraw code now uses glocks.
Also, before this patch, if a process encountered an error and
decided to withdraw, if another process was already withdrawing,
the second withdraw would be silently ignored, which set it free
to unlock its glocks. That's correct behavior if the original
withdrawer encounters further errors down the road. But if
secondary waiters don't wait for the journal replay, unlocking
glocks will allow other nodes to use them, despite the fact that
the journal containing those blocks is being replayed. The
replay needs to finish before our glocks are released to other
nodes. IOW, secondary withdraws need to wait for the first
withdraw to finish.
For example, if an rgrp glock is unlocked by a process that didn't
wait for the first withdraw, a journal replay could introduce file
system corruption by replaying a rgrp block that has already been
granted to a different cluster node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
We need to allow some glocks to be enqueued, dequeued, promoted, and demoted
when we're withdrawn. For example, to maintain metadata integrity, we should
disallow the use of inode and rgrp glocks when withdrawn. Other glocks, like
iopen or the transaction glocks may be safely used because none of their
metadata goes through the journal. So in general, we should disallow all
glocks with an address space, and allow all the others. One exception is:
we need to allow our active journal to be demoted so others may recover it.
Allowing glocks after withdraw gives us the ability to take appropriate
action (in a following patch) to have our journal properly replayed by
another node rather than just abandoning the current transactions and
pretending nothing bad happened, leaving the other nodes free to modify
the blocks we had in our journal, which may result in file system
corruption.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch function check_journal_clean was in ops_fstype.c.
This patch moves it to util.c so we can make use of it elsewhere
in a future patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Don't bother with "mixed" options that would allow both the
form with and without argument (i.e. both -o foo and -o foo=bar).
Rather than trying to shove both into a single fs_parameter_spec,
allow having with-argument and no-argument specs with the same
name and teach fs_parse to handle that.
There are very few options of that sort, and they are actually
easier to handle that way - callers end up with less postprocessing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The former contains nothing but a pointer to an array of the latter...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
no real difference now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Don't do a single array; attach them to fsparam_enum() entry
instead. And don't bother trying to embed the names into those -
it actually loses memory, with no real speedup worth mentioning.
Simplifies validation as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Every caller of function gfs2_struct2blk specified sizeof(u64).
This patch eliminates the unnecessary parameter and replaces the
size calculation with a new superblock variable that is computed
to be the maximum number of block pointers we can fit inside a
log descriptor, as is done for pointers per dinode and indirect
block.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add function gfs2_withdrawn and replace all checks for the SDF_WITHDRAWN
bit to call it. This does not change the logic or function of gfs2, and
it facilitates later improvements to the withdraw sequence.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The gfs2_fs_parameters is not used outside the unit
it is declared in, so make it static.
Fixes the following sparse warning:
fs/gfs2/ops_fstype.c:1331:39: warning: symbol 'gfs2_fs_parameters' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When gfs2 was converted to use fs_context, the initialisation of the
mount args structure to the currently active args was lost with the
removal of gfs2_remount_fs(), so the checks of the new args on remount
became checks against the default values instead of the current ones.
This caused unexpected remount behaviour and test failures (xfstests
generic/294, generic/306 and generic/452).
Reinstate the args initialisation, this time in gfs2_init_fs_context()
and conditional upon fc->purpose, as that's the only time we get control
before the mount args are parsed in the remount process.
Fixes: 1f52aa08d12f ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
gfs2 and gfs2meta share an ->init_fs_context function which allocates an
args structure stored in fc->fs_private. gfs2 registers a ->free
function to free this memory when the fs_context is cleaned up, but
there was not one registered for gfs2meta, causing a leak.
Register a ->free function for gfs2meta. The existing gfs2_fc_free
function does what we need.
Reported-by: syzbot+c2fdfd2b783754878fb6@syzkaller.appspotmail.com
Fixes: 1f52aa08d12f ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more mount API conversions from Al Viro:
"Assorted conversions of options parsing to new API.
gfs2 is probably the most serious one here; the rest is trivial stuff.
Other things in what used to be #work.mount are going to wait for the
next cycle (and preferably go via git trees of the filesystems
involved)"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gfs2: Convert gfs2 to fs_context
vfs: Convert spufs to use the new mount API
vfs: Convert hypfs to use the new mount API
hypfs: Fix error number left in struct pointer member
vfs: Convert functionfs to use the new mount API
vfs: Convert bpf to use the new mount API
|
|
Convert gfs2 and gfs2meta to fs_context. Removes the duplicated vfs code
from gfs2_mount and instead uses the new vfs_get_block_super() before
switching the ->root to the appropriate dentry.
The mount option parsing has been converted to the new API and error
reporting for invalid options has been made more precise at the same
time.
All of the mount/remount code has been moved into ops_fstype.c
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: cluster-devel@redhat.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Because s_vfs_rename_mutex is not cluster-wide, multiple nodes can
reverse the roles of which directories are "old" and which are "new" for
the purposes of rename. This can cause deadlocks where two nodes end up
waiting for each other.
There can be several layers of directory dependencies across many nodes.
This patch fixes the problem by acquiring all gfs2_rename's inode glocks
asychronously and waiting for all glocks to be acquired. That way all
inodes are locked regardless of the order.
The timeout value for multiple asynchronous glocks is calculated to be
the total of the individual wait times for each glock times two.
Since gfs2_exchange is very similar to gfs2_rename, both functions are
patched in the same way.
A new async glock wait queue, sd_async_glock_wait, keeps a list of
waiters for these events. If gfs2's holder_wake function detects an
async holder, it wakes up any waiters for the event. The waiter only
tests whether any of its requests are still pending.
Since the glocks are sent to dlm asychronously, the wait function needs
to check to see which glocks, if any, were granted.
If a glock is granted by dlm (and therefore held), its minimum hold time
is checked and adjusted as necessary, as other glock grants do.
If the event times out, all glocks held thus far must be dequeued to
resolve any existing deadlocks. Then, if there are any outstanding
locking requests, we need to loop around and wait for dlm to respond to
those requests too. After we release all requests, we return -ESTALE to
the caller (vfs rename) which loops around and retries the request.
Node1 Node2
--------- ---------
1. Enqueue A Enqueue B
2. Enqueue B Enqueue A
3. A granted
6. B granted
7. Wait for B
8. Wait for A
9. A times out (since Node 1 holds A)
10. Dequeue B (since it was granted)
11. Wait for all requests from DLM
12. B Granted (since Node2 released it in step 10)
13. Rename
14. Dequeue A
15. DLM Grants A
16. Dequeue A (due to the timeout and since we
no longer have B held for our task).
17. Dequeue B
18. Return -ESTALE to vfs
19. VFS retries the operation, goto step 1.
This release-all-locks / acquire-all-locks may slow rename / exchange
down as both nodes struggle in the same way and do the same thing.
However, this will only happen when there is contention for the same
inodes, which ought to be rare.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, the superblock flag indicating when a file system
is withdrawn was called SDF_SHUTDOWN. This patch simply renames it to
the more obvious SDF_WITHDRAWN.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Use IS_ERR_OR_NULL where appropriate.
(Several more places converted by Andreas.)
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add a free_sbd function for freeing a struct gfs2_sbd. Use that for
freeing a super-block descriptor, either directly or via kobject_put.
Free sd_lkstats inside the kobject release function: that way,
gfs2_put_super will no longer leak sd_lkstats.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use bios to read in the journal into the address space of the journal inode
(jd_inode), sequentially and in large chunks. This is faster for locating the
journal head that the previous binary search approach. When performing
recovery, we keep the journal in the address space until recovery is done,
which further speeds up things.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rename sd_log_le_revoke to sd_log_revokes and sd_log_le_ordered to
sd_log_ordered: not sure what le stands for here, but it doesn't add
clarity, and if it stands for list entry, it's actually confusing as
those are both list heads but not list entries.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
