summaryrefslogtreecommitdiff
path: root/fs/gfs2/xattr.c
AgeCommit message (Collapse)Author
2018-03-28gfs2: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) callsChristoph Hellwig
I_DIRTY_DATASYNC is a strict superset of I_DIRTY_SYNC semantics, as in mark dirty to be written out by fdatasync as well. So dirtying for both flags makes no sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-31gfs2: Allow gfs2_xattr_set to be called with the glock heldAndreas Gruenbacher
On the following call path: gfs2_setattr -> setattr_prepare -> ... -> cap_inode_killpriv -> ... -> gfs2_xattr_set the glock is locked in gfs2_setattr, so check for recursive locking in gfs2_xattr_set as gfs2_xattr_get already does. While at it, get rid of need_unlock in gfs2_xattr_get. Fixes xfstest generic/093. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Acked-by: Abhijith Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-10-31gfs2: Fix xattr fsyncAndreas Gruenbacher
Make sure that changing xattrs marks the corresponding inode dirty so that a subsequent fsync will sync those changes to disk. We set I_DIRTY_SYNC as well as I_DIRTY_DATASYNC so that both fsync and fdatasync will sync xattr changes: xattrs can contain information critical to how the data can be accessed, so we don't want fdatasync to skip them. Fixes xfstest generic/066. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Andrew Price <anprice@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-08-31gfs2: don't return ENODATA in __gfs2_xattr_set unless replacingErnesto A. Fernández
The function __gfs2_xattr_set() will return -ENODATA when called to remove a xattr that does not exist. The result is that setfacl will show an exit status of 1 when called to set only a file's mode bits (on a file with no ACLs), despite succeeding. A "No data available" error will be printed as well. To fix this return 0 instead, except when the XATTR_REPLACE flag is set, in which case -ENODATA is appropriate. This is consistent with how most other xattr setting functions work, in other filesystems. Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-08-25GFS2: Fix up some sparse warningsBob Peterson
This patch cleans up various pieces of GFS2 to avoid sparse errors. This doesn't fix them all, but it fixes several. The first error, in function glock_hash_walk was a genuine bug where the rhashtable could be started and not stopped. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-07-05gfs2: Protect gl->gl_object by spin lockAndreas Gruenbacher
Put all remaining accesses to gl->gl_object under the gl->gl_lockref.lock spinlock to prevent races. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-27fs: Replace CURRENT_TIME with current_time() for inode timestampsDeepa Dinamani
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-27switch xattr_handler->set() to passing dentry and inode separatelyAl Viro
preparation for similar switch in ->setxattr() (see the next commit for rationale). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-12gfs2: Switch to generic xattr handlersAl Viro
Switch to the generic xattr handlers and take the necessary glocks at the layer below. The following are the new xattr "entry points"; they are called with the glock held already in the following cases: gfs2_xattr_get: From SELinux, during lookups. gfs2_xattr_set: The glock is never held. gfs2_get_acl: From gfs2_create_inode -> posix_acl_create and gfs2_setattr -> posix_acl_chmod. gfs2_set_acl: From gfs2_setattr -> posix_acl_chmod. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-10xattr_handler: pass dentry and inode as separate arguments of ->get()Al Viro
... and do not assume they are already attached to each other Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-12Merge tag 'gfs2-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "Here is a list of patches we've accumulated for GFS2 for the current upstream merge window. Last window's set was short, but I warned that this one would be bigger, and so it is. We've got 19 patches: - A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that newly added journals don't get flagged, deleted, and recreated by fsck.gfs2. - Two patches from Andreas Gruenbacher to improve GFS2 performance where extended attributes are involved. - A patch from Andy Price to fix a suspicious rcu dereference error. - Two patches from Ben Marzinski that rework how GFS2's NFS cookies are managed. This fixes readdir problems with nfs-over-gfs2. - A patch from Ben Marzinski that fixes a race in unmounting GFS2. - A set of four patches from me to move the resource group reservations inside the gfs2 inode to improve performance and fix a bug whereby get_write_access improperly prevented some operations like chown. - A patch from me to spinlock-protect the setting of system statfs file data. This was causing small discrepancies between df and du. - A patch from me to reintroduce a timeout while clearing glocks which was accidentally dropped some time ago. - A patch from me to wait for iopen glock dequeues in order to improve deleting of files that were unlinked from a different cluster node. - A patch from me to ensure metadata address spaces get truncated when an inode is evicted. - A patch from me to fix a bug in which a memory leak could occur in some error cases when inodes were trying to be created. - A patch to consistently use iopen glocks to transition from the unlinked state to the deleted state. - A patch to fix a glock reference count error when inode creation fails. - A patch from Junxiao Bi to fix an flock panic. - A patch from Markus Elfring that removes an unnecessary if" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: fix flock panic issue GFS2: Don't do glock put on when inode creation fails GFS2: Always use iopen glock for gl_deletes GFS2: Release iopen glock in gfs2_create_inode error cases GFS2: Truncate address space mapping when deleting an inode GFS2: Wait for iopen glock dequeues gfs2: clear journal live bit in gfs2_log_flush gfs2: change gfs2 readdir cookie gfs2: keep offset when splitting dir leaf blocks GFS2: Reintroduce a timeout in function gfs2_gl_hash_clear GFS2: Update master statfs buffer with sd_statfs_spin locked GFS2: Reduce size of incore inode GFS2: Make rgrp reservations part of the gfs2_inode structure GFS2: Extract quota data from reservations structure (revert 5407e24) gfs2: Extended attribute readahead optimization gfs2: Extended attribute readahead GFS2: Use rht_for_each_entry_rcu in glock_hash_walk GFS2: Delete an unnecessary check before the function call "iput" gfs2: Automatically set GFS2_DIF_SYSTEM flag on system files
2015-12-06gfs2: Remove gfs2_xattr_acl_chmodAndreas Gruenbacher
Function gfs2_xattr_acl_chmod is unused since commit e01580bf. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Acked-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-16gfs2: Extended attribute readaheadAndreas Gruenbacher
When gfs2 allocates an inode and its extended attribute block next to each other at inode create time, the inode's directory entry indicates that in de_rahead. In that case, we can readahead the extended attribute block when we read in the inode. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-11-13xattr handlers: Pass handler to operations instead of flagsAndreas Gruenbacher
The xattr_handler operations are currently all passed a file system specific flags value which the operations can use to disambiguate between different handlers; some file systems use that to distinguish the xattr namespace, for example. In some oprations, it would be useful to also have access to the handler prefix. To allow that, pass a pointer to the handler to operations instead of the flags value alone. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18gfs2: perform quota checks against allocation parametersAbhi Das
Use struct gfs2_alloc_parms as an argument to gfs2_quota_check() and gfs2_quota_lock_check() to check for quota violations while accounting for the new blocks requested by the current operation in ap->target. Previously, the number of new blocks requested during an operation were not accounted for during quota_check and would allow these operations to exceed quota. This was not very apparent since most operations allocated only 1 block at a time and quotas would get violated in the next operation. i.e. quota excess would only be by 1 block or so. With fallocate, (where we allocate a bunch of blocks at once) the quota excess is non-trivial and is addressed by this patch. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-25gfs2: use generic posix ACL infrastructureChristoph Hellwig
This contains some major refactoring for the create path so that inodes are created with the right mode to start with instead of fixing it up later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-02GFS2: Add allocation parameters structureSteven Whitehouse
This patch adds a structure to contain allocation parameters with the intention of future expansion of this structure. The idea is that we should be able to add more information about the allocation in the future in order to allow the allocator to make a better job of placing the requests on-disk. There is no functional difference from applying this patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-02-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace and namespace infrastructure changes from Eric W Biederman: "This set of changes starts with a few small enhnacements to the user namespace. reboot support, allowing more arbitrary mappings, and support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the user namespace root. I do my best to document that if you care about limiting your unprivileged users that when you have the user namespace support enabled you will need to enable memory control groups. There is a minor bug fix to prevent overflowing the stack if someone creates way too many user namespaces. The bulk of the changes are a continuation of the kuid/kgid push down work through the filesystems. These changes make using uids and gids typesafe which ensures that these filesystems are safe to use when multiple user namespaces are in use. The filesystems converted for 3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The changes for these filesystems were a little more involved so I split the changes into smaller hopefully obviously correct changes. XFS is the only filesystem that remains. I was hoping I could get that in this release so that user namespace support would be enabled with an allyesconfig or an allmodconfig but it looks like the xfs changes need another couple of days before it they are ready." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits) cifs: Enable building with user namespaces enabled. cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t cifs: Convert struct cifs_sb_info to use kuids and kgids cifs: Modify struct smb_vol to use kuids and kgids cifs: Convert struct cifsFileInfo to use a kuid cifs: Convert struct cifs_fattr to use kuid and kgids cifs: Convert struct tcon_link to use a kuid. cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t cifs: Convert from a kuid before printing current_fsuid cifs: Use kuids and kgids SID to uid/gid mapping cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc cifs: Use BUILD_BUG_ON to validate uids and gids are the same size cifs: Override unmappable incoming uids and gids nfsd: Enable building with user namespaces enabled. nfsd: Properly compare and initialize kuids and kgids nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids nfsd: Modify nfsd4_cb_sec to use kuids and kgids nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion nfsd: Convert nfsxdr to use kuids and kgids nfsd: Convert nfs3xdr to use kuids and kgids ...
2013-02-13gfs2: Split NO_QUOTA_CHANGE inot NO_UID_QUTOA_CHANGE and NO_GID_QUTOA_CHANGEEric W. Biederman
Split NO_QUOTA_CHANGE into NO_UID_QUTOA_CHANGE and NO_GID_QUTOA_CHANGE so the constants may be well typed. Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-01-29GFS2: Split gfs2_trans_add_bh() into twoSteven Whitehouse
There is little common content in gfs2_trans_add_bh() between the data and meta classes by the time that the functions which it calls are taken into account. The intent here is to split this into two separate functions. Stage one is to introduce gfs2_trans_add_data() and gfs2_trans_add_meta() and update the callers accordingly. Later patches will then pull in the content of gfs2_trans_add_bh() and its dependent functions in order to clean up the code in this area. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07GFS2: Add Orlov allocatorSteven Whitehouse
Just like ext3, this works on the root directory and any directory with the +T flag set. Also, just like ext3, any subdirectory created in one of the just mentioned cases will be allocated to a random resource group (GFS2 equivalent of a block group). If you are creating a set of directories, each of which will contain a job running on a different node, then by setting +T on the parent directory before creating the subdirectories, each will land up in a different resource group, and thus resource group contention between nodes will be kept to a minimum. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Remove rs_requested field from reservationsSteven Whitehouse
The rs_requested field is left over from the original allocation code, however this should have been a parameter passed to the various functions from gfs2_inplace_reserve() and not a member of the reservation structure as the value is not required after the initial allocation. This also helps simplify the code since we no longer need to set the rs_requested to zero. Also the gfs2_inplace_release() function can also be simplified since the reservation structure will always be defined when it is called, and the only remaining task is to unlock the rgrp if required. It can also now be called unconditionally too, resulting in a further simplification. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Merge two nearly identical xattr functionsSteven Whitehouse
There were two functions in the xattr code which were nearly identical, the only difference being that one was copy data into the unstuffed xattrs and the other was copying data out from it. This patch merges the two functions such that the code which deal with iteration over the unstuffed xattrs is no longer duplicated. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-07-19GFS2: Reduce file fragmentationBob Peterson
This patch reduces GFS2 file fragmentation by pre-reserving blocks. The resulting improved on disk layout greatly speeds up operations in cases which would have resulted in interlaced allocation of blocks previously. A typical example of this is 10 parallel dd processes, each writing to a file in a common dirctory. The implementation uses an rbtree of reservations attached to each resource group (and each inode). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-06-06GFS2: Fold quota data into the reservations structBob Peterson
This patch moves the ancillary quota data structures into the block reservations structure. This saves GFS2 some time and effort in allocating and deallocating the qadata structure. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-05GFS2: Make sure rindex is uptodate before starting transactionsBob Peterson
This patch removes the call from gfs2_blk2rgrd to function gfs2_rindex_update and replaces it with individual calls. The former way turned out to be too problematic. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: FITRIM ioctl supportSteven Whitehouse
The FITRIM ioctl provides an alternative way to send discard requests to the underlying device. Using the discard mount option results in every freed block generating a discard request to the block device. This can be slow, since many block devices can only process discard requests of larger sizes, and also such operations can be time consuming. Rather than using the discard mount option, FITRIM allows a sweep of the filesystem on an occasional basis, and also to optionally avoid sending down discard requests for smaller regions. In GFS2 FITRIM will work at resource group granularity. There is a flag for each resource group which keeps track of which resource groups have been trimmed. This flag is reset whenever a deallocation occurs in the resource group, and set whenever a successful FITRIM of that resource group has taken place. This helps to reduce repeated discard requests for the same block ranges, again improving performance. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-22GFS2: decouple quota allocations from block allocationsBob Peterson
This patch separates the code pertaining to allocations into two parts: quota-related information and block reservations. This patch also moves all the block reservation structure allocations to function gfs2_inplace_reserve to simplify the code, and moves the frees to function gfs2_inplace_release. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-21GFS2: move toward a generic multi-block allocatorBob Peterson
This patch is a revision of the one I previously posted. I tried to integrate all the suggestions Steve gave. The purpose of the patch is to change function gfs2_alloc_block (allocate either a dinode block or an extent of data blocks) to a more generic gfs2_alloc_blocks function that can allocate both a dinode _and_ an extent of data blocks in the same call. This will ultimately help us create a multi-block reservation scheme to reduce file fragmentation. This patch moves more toward a generic multi-block allocator that takes a pointer to the number of data blocks to allocate, plus whether or not to allocate a dinode. In theory, it could be called to allocate (1) a single dinode block, (2) a group of one or more data blocks, or (3) a dinode plus several data blocks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-15GFS2: combine gfs2_alloc_block and gfs2_alloc_diBob Peterson
GFS2 functions gfs2_alloc_block and gfs2_alloc_di do basically the same things, with a few exceptions. This patch combines the two functions into a slightly more generic gfs2_alloc_block. Having one centralized block allocation function will reduce code redundancy and make it easier to implement multi-block reservations to reduce file fragmentation in the future. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-09GFS2: Fix very unlikley memory leak in ACL xattr codeSteven Whitehouse
This was spotted by automated code analysis. In case reading an ACL xattr failed (only likely to happen if there is an I/O error for example, and even then only with unstuffed xattrs, so pretty difficult to trigger) a small amount of memory could potentially be leaked. This patch adds a kfree to the error path, and also removes a test which is no longer required (gfs2_ea_get_copy always returns either a negative error, or a length) Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21GFS2: Use cached rgrp in gfs2_rlist_add()Steven Whitehouse
Each block which is deallocated, requires a call to gfs2_rlist_add() and each of those calls was calling gfs2_blk2rgrpd() in order to figure out which rgrp the block belonged in. This can be speeded up by making use of the rgrp cached in the inode. We also reset this cached rgrp in case the block has changed rgrp. This should provide a big reduction in gfs2_blk2rgrpd() calls during deallocation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21GFS2: Cache the most recently used resource group in the inodeSteven Whitehouse
This means that after the initial allocation for any inode, the last used resource group is cached in the inode for future use. This drastically reduces the number of lookups of resource groups in the common case, and this the contention on that data structure. The allocation algorithm is the same as previously, except that we always check to see if the goal block is within the cached rgrp first before going to the rbtree to look one up. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21GFS2: Make resource groups "append only" during life of fsSteven Whitehouse
Since we have ruled out supporting online filesystem shrink, it is possible to make the resource group list append only during the life of a super block. This gives several benefits: Firstly, we only need to read new rindex elements as they are added rather than needing to reread the whole rindex file each time one element is added. Secondly, the rindex glock can be held for much shorter periods of time, and is completely removed from the fast path for allocations. The lock is taken in shared mode only when updating the resource groups when the first allocation occurs, and after a grow has taken place. Thirdly, this results in a reduction in code size, and everything gets a lot simpler to understand in this area. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21GFS2: Use ->dirty_inode()Steven Whitehouse
The aim of this patch is to use the newly enhanced ->dirty_inode() super block operation to deal with atime updates, rather than piggy backing that code into ->write_inode() as is currently done. The net result is a simplification of the code in various places and a reduction of the number of gfs2_dinode_out() calls since this is now implied by ->dirty_inode(). Some of the mark_inode_dirty() calls have been moved under glocks in order to take advantage of then being able to avoid locking in ->dirty_inode() when we already have suitable locks. One consequence is that generic_write_end() now correctly deals with file size updates, so that we do not need a separate check for that afterwards. This also, indirectly, means that fdatasync should work correctly on GFS2 - the current code always syncs the metadata whether it needs to or not. Has survived testing with postmark (with and without atime) and also fsx. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-11-30GFS2: Clean up duplicated setattr codeSteven Whitehouse
While preparing the last patch I noticed that the gfs2_setattr_simple code had been duplicated into two other places. This patch updates those to call gfs2_setattr_simple rather than open coding it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-11-30GFS2: Remove unreachable calls to vmtruncateSteven Whitehouse
Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-28GFS2: reserve more blocks for transactionsBenjamin Marzinski
Some of the functions in GFS2 were not reserving space in the transaction for the resource group header and the resource groups bitblocks that get added when you do allocation. GFS2 now makes sure to reserve space for the resource group header and either all the bitblocks in the resource group, or one for each block that it may allocate, whichever is smaller using the new gfs2_rg_blocks() inline function. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-08-09remove inode_setattrChristoph Hellwig
Replace inode_setattr with opencoded variants of it in all callers. This moves the remaining call to vmtruncate into the filesystem methods where it can be replaced with the proper truncate sequence. In a few cases it was obvious that we would never end up calling vmtruncate so it was left out in the opencoded variant: spufs: explicitly checks for ATTR_SIZE earlier btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above In addition to that ncpfs called inode_setattr with handcrafted iattrs, which allowed to trim down the opencoded variant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21gfs: constify xattr_handlerStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-08GFS2: Fix gfs2_xattr_acl_chmod()Steven Whitehouse
The ref counting for the bh returned by gfs2_ea_find() was wrong. This patch ensures that we always drop the ref count to that bh correctly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-16sanitize xattr handler prototypesChristoph Hellwig
Add a flags argument to struct xattr_handler and pass it to all xattr handler methods. This allows using the same methods for multiple handlers, e.g. for the ACL methods which perform exactly the same action for the access and default ACLs, just using a different underlying attribute. With a little more groundwork it'll also allow sharing the methods for the regular user/trusted/secure handlers in extN, ocfs2 and jffs2 like it's already done for xfs in this patch. Also change the inode argument to the handlers to a dentry to allow using the handlers mechnism for filesystems that require it later, e.g. cifs. [with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-03GFS2: Clean up ACLsSteven Whitehouse
To prepare for support for caching of ACLs, this cleans up the GFS2 ACL support by pushing the xattr code back into xattr.c and changing the acl_get function into one which only returns ACLs so that we can drop the caching function into it shortly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Fix up system xattrsSteven Whitehouse
This code has been shamelessly stolen from XFS at the suggestion of Christoph Hellwig. I've not added support for cached ACLs so far... watch for that in a later patch, although this is designed in such a way that they should be easy to add. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org>
2009-09-14GFS2: Whitespace fixesSteven Whitehouse
Reported-by: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-08-26GFS2: Rename eattr.[ch] as xattr.[ch]Steven Whitehouse
Use the more conventional name for the extended attribute support code. Update all the places which care. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>