summaryrefslogtreecommitdiff
path: root/fs/jbd2/commit.c
AgeCommit message (Collapse)Author
2021-01-27block: use an on-stack bio in blkdev_issue_flushChristoph Hellwig
There is no point in allocating memory for a synchronous flush. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-06jbd2: add todo for a fast commit performance optimizationHarshad Shirwadkar
Fast commit performance can be optimized if commit thread doesn't wait for ongoing fast commits to complete until the transaction enters T_FLUSH state. Document this optimization. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201106035911.1942128-11-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-11-06jbd2: rename j_maxlen to j_total_len and add jbd2_journal_max_txn_bufsHarshad Shirwadkar
The on-disk superblock field sb->s_maxlen represents the total size of the journal including the fast commit area and is no more the max number of blocks available for a transaction. The maximum number of blocks available to a transaction is reduced by the number of fast commit blocks. So, this patch renames j_maxlen to j_total_len to better represent its intent. Also, it adds a function to calculate max number of bufs available for a transaction. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-21jbd2: add fast commit machineryHarshad Shirwadkar
This functions adds necessary APIs needed in JBD2 layer for fast commits. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18jbd2, ext4, ocfs2: introduce/use journal callbacks ↵Mauricio Faria de Oliveira
j_submit|finish_inode_data_buffers() Introduce journal callbacks to allow different behaviors for an inode in journal_submit|finish_inode_data_buffers(). The existing users of the current behavior (ext4, ocfs2) are adapted to use the previously exported functions that implement the current behavior. Users are callers of jbd2_journal_inode_ranged_write|wait(), which adds the inode to the transaction's inode list with the JI_WRITE|WAIT_DATA flags. Only ext4 and ocfs2 in-tree. Both CONFIG_EXT4_FS and CONFIG_OCSFS2_FS select CONFIG_JBD2, which builds fs/jbd2/commit.c and journal.c that define and export the functions, so we can call directly in ext4/ocfs2. Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-3-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()Mauricio Faria de Oliveira
Export functions that implement the current behavior done for an inode in journal_submit|finish_inode_data_buffers(). No functional change. Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201006004841.600488-2-mfo@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-05-22block: remove the error_sector argument to blkdev_issue_flushChristoph Hellwig
The argument isn't used by any caller, and drivers don't fill out bi_sector for flush requests either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-05jbd2: improve comments about freeing data buffers whose page mapping is NULLzhangyi (F)
Improve comments in jbd2_journal_commit_transaction() to describe why we don't need to clear the buffer_mapped bit for freeing file mapping buffers whose page mapping is NULL. Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com Fixes: c96dceeabf76 ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer") Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-13jbd2: do not clear the BH_Mapped flag when forgetting a metadata bufferzhangyi (F)
Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") set the BH_Freed flag when forgetting a metadata buffer which belongs to the committing transaction, it indicate the committing process clear dirty bits when it is done with the buffer. But it also clear the BH_Mapped flag at the same time, which may trigger below NULL pointer oops when block_size < PAGE_SIZE. rmdir 1 kjournald2 mkdir 2 jbd2_journal_commit_transaction commit transaction N jbd2_journal_forget set_buffer_freed(bh1) jbd2_journal_commit_transaction commit transaction N+1 ... clear_buffer_mapped(bh1) ext4_getblk(bh2 ummapped) ... grow_dev_page init_page_buffers bh1->b_private=NULL bh2->b_private=NULL jbd2_journal_put_journal_head(jh1) __journal_remove_journal_head(hb1) jh1 is NULL and trigger oops *) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has already been unmapped. For the metadata buffer we forgetting, we should always keep the mapped flag and clear the dirty flags is enough, so this patch pick out the these buffers and keep their BH_Mapped flag. Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-13jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()zhangyi (F)
There is no need to delay the clearing of b_modified flag to the transaction committing time when unmapping the journalled buffer, so just move it to the journal_unmap_buffer(). Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-01-25jbd2: switch to use jbd2_journal_abort() when failed to submit the commit recordzhangyi (F)
We invoke jbd2_journal_abort() to abort the journal and record errno in the jbd2 superblock when committing journal transaction besides the failure on submitting the commit record. But there is no need for the case and we can also invoke jbd2_journal_abort() instead of __jbd2_journal_abort_hard(). Fixes: 818d276ceb83a ("ext4: Add the journal checksum feature") Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05Merge branch 'jk/jbd2-revoke-overflow'Theodore Ts'o
2019-11-05jbd2: Account descriptor blocks into t_outstanding_creditsJan Kara
Currently, journal descriptor blocks were not accounted in transaction->t_outstanding_credits and we were just leaving some slack space in the journal for them (in jbd2_log_space_left() and jbd2_space_needed()). This is making proper accounting (and reservation we want to add) of descriptor blocks difficult so switch to accounting descriptor blocks in transaction->t_outstanding_credits and just reserve the same amount of credits in t_outstanding credits for journal descriptor blocks when creating transaction. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-18-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05jbd2: Fix statistics for the number of logged blocksJan Kara
jbd2 statistics counting number of blocks logged in a transaction was wrong. It didn't count the commit block and more importantly it didn't count revoke descriptor blocks. Make sure these get properly counted. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-13-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05jbd2: Fixup stale comment in commit codeJan Kara
jbd2_journal_next_log_block() does not look at transaction->t_outstanding_credits. Remove the misleading comment. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-10-21jbd2: Make state lock a spinlockThomas Gleixner
Bit-spinlocks are problematic on PREEMPT_RT if functions which might sleep on RT, e.g. spin_lock(), alloc/free(), are invoked inside the lock held region because bit spinlocks disable preemption even on RT. A first attempt was to replace state lock with a spinlock placed in struct buffer_head and make the locking conditional on PREEMPT_RT and DEBUG_BIT_SPINLOCKS. Jan pointed out that there is a 4 byte hole in struct journal_head where a regular spinlock fits in and he would not object to convert the state lock to a spinlock unconditionally. Aside of solving the RT problem, this also gains lockdep coverage for the journal head state lock (bit-spinlocks are not covered by lockdep as it's hard to fit a lockdep map into a single bit). The trivial change would have been to convert the jbd_*lock_bh_state() inlines, but that comes with the downside that these functions take a buffer head pointer which needs to be converted to a journal head pointer which adds another level of indirection. As almost all functions which use this lock have a journal head pointer readily available, it makes more sense to remove the lock helper inlines and write out spin_*lock() at all call sites. Fixup all locking comments as well. Suggested-by: Jan Kara <jack@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jan Kara <jack@suse.com> Cc: linux-ext4@vger.kernel.org Link: https://lore.kernel.org/r/20190809124233.13277-7-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-10-21jbd2: Move dropping of jh reference out of un/re-filing functionsJan Kara
__jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() drop transaction's jh reference when they remove jh from a transaction. This will be however inconvenient once we move state lock into journal_head itself as we still need to unlock it and we'd need to grab jh reference just for that. Move dropping of jh reference out of these functions into the few callers. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20190809124233.13277-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-06-20jbd2: introduce jbd2_inode dirty range scopingRoss Zwisler
Currently both journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() operate on the entire address space of each of the inodes associated with a given journal entry. The consequence of this is that if we have an inode where we are constantly appending dirty pages we can end up waiting for an indefinite amount of time in journal_finish_inode_data_buffers() while we wait for all the pages under writeback to be written out. The easiest way to cause this type of workload is do just dd from /dev/zero to a file until it fills the entire filesystem. This can cause journal_finish_inode_data_buffers() to wait for the duration of the entire dd operation. We can improve this situation by scoping each of the inode dirty ranges associated with a given transaction. We do this via the jbd2_inode structure so that the scoping is contained within jbd2 and so that it follows the lifetime and locking rules for that structure. This allows us to limit the writeback & wait in journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() respectively to the dirty range for a given struct jdb2_inode, keeping us from waiting forever if the inode in question is still being appended to. Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2019-05-30jbd2: fix typo in comment of journal_submit_inode_data_buffersLiu Song
delayed/dealyed Signed-off-by: Liu Song <liu.song11@zte.com.cn> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-03-01jbd2: fix invalid descriptor block checksumluojiajun
In jbd2_journal_commit_transaction(), if we are in abort mode, we may flush the buffer without setting descriptor block checksum by goto start_journal_io. Then fs is mounted, jbd2_descriptor_block_csum_verify() failed. [ 271.379811] EXT4-fs (vdd): shut down requested (2) [ 271.381827] Aborting journal on device vdd-8. [ 271.597136] JBD2: Invalid checksum recovering block 22199 in log [ 271.598023] JBD2: recovery failed [ 271.598484] EXT4-fs (vdd): error loading journal Fix this problem by keep setting descriptor block checksum if the descriptor buffer is not NULL. This checksum problem can be reproduced by xfstests generic/388. Signed-off-by: luojiajun <luojiajun3@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2018-12-03jbd2: avoid long hold times of j_state_lock while committing a transactionJan Kara
We can hold j_state_lock for writing at the beginning of jbd2_journal_commit_transaction() for a rather long time (reportedly for 30 ms) due cleaning revoke bits of all revoked buffers under it. The handling of revoke tables as well as cleaning of t_reserved_list, and checkpoint lists does not need j_state_lock for anything. It is only needed to prevent new handles from joining the transaction. Generally T_LOCKED transaction state prevents new handles from joining the transaction - except for reserved handles which have to allowed to join while we wait for other handles to complete. To prevent reserved handles from joining the transaction while cleaning up lists, add new transaction state T_SWITCH and watch for it when starting reserved handles. With this we can just drop the lock for operations that don't need it. Reported-and-tested-by: Adrian Hunter <adrian.hunter@intel.com> Suggested-by: "Theodore Y. Ts'o" <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-29jbd2: replace current_kernel_time64 with ktime equivalentArnd Bergmann
jbd2 is one of the few callers of current_kernel_time64(), which is a wrapper around ktime_get_coarse_real_ts64(). This calls the latter directly for consistency with the rest of the kernel that is moving to the ktime_get_ family of time accessors. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-12-17ext4: fix up remaining files with SPDX cleanupsTheodore Ts'o
A number of ext4 source files were skipped due because their copyright permission statements didn't match the expected text used by the automated conversion utilities. I've added SPDX tags for the rest. While looking at some of these files, I've noticed that we have quite a bit of variation on the licenses that were used --- in particular some of the Red Hat licenses on the jbd2 files use a GPL2+ license, and we have some files that have a LGPL-2.1 license (which was quite surprising). I've not attempted to do any license changes. Even if it is perfectly legal to relicense to GPL 2.0-only for consistency's sake, that should be done with ext4 developer community discussion. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-06jbd2: don't clear and reset errors after waiting on writebackJeff Layton
Resetting this flag is almost certainly racy, and will be problematic with some coming changes. Make filemap_fdatawait_keep_errors return int, but not clear the flag(s). Have jbd2 call it instead of filemap_fdatawait and don't attempt to re-set the error flag if it fails. Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-01-14fs/jbd2, locking/mutex, sched/wait: Use mutex_lock_io() for ↵Tejun Heo
journal->j_checkpoint_mutex When an ext4 fs is bogged down by a lot of metadata IOs (in the reported case, it was deletion of millions of files, but any massive amount of journal writes would do), after the journal is filled up, tasks which try to access the filesystem and aren't currently performing the journal writes end up waiting in __jbd2_log_wait_for_space() for journal->j_checkpoint_mutex. Because those mutex sleeps aren't marked as iowait, this condition can lead to misleadingly low iowait and /proc/stat:procs_blocked. While iowait propagation is far from strict, this condition can be triggered fairly easily and annotating these sleeps correctly helps initial diagnosis quite a bit. Use the new mutex_lock_io() for journal->j_checkpoint_mutex so that these sleeps are properly marked as iowait. Reported-by: Mingbo Wan <mingbo@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1477673892-28940-5-git-send-email-tj@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-01block,fs: use REQ_* flags directlyChristoph Hellwig
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-11fs: use mapping_set_error instead of opencoded set_bitMichal Hocko
The mapping_set_error() helper sets the correct AS_ flag for the mapping so there is no reason to open code it. Use the helper directly. [akpm@linux-foundation.org: be honest about conversion from -ENXIO to -EIO] Link: http://lkml.kernel.org/r/20160912111608.2588-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The major change this cycle is deleting ext4's copy of the file system encryption code and switching things over to using the copies in fs/crypto. I've updated the MAINTAINERS file to add an entry for fs/crypto listing Jaeguk Kim and myself as the maintainers. There are also a number of bug fixes, most notably for some problems found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also fixed is a writeback deadlock detected by generic/130, and some potential races in the metadata checksum code" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) ext4: verify extent header depth ext4: short-cut orphan cleanup on error ext4: fix reference counting bug on block allocation error MAINTAINRES: fs-crypto maintainers update ext4 crypto: migrate into vfs's crypto engine ext2: fix filesystem deadlock while reading corrupted xattr block ext4: fix project quota accounting without quota limits enabled ext4: validate s_reserved_gdt_blocks on mount ext4: remove unused page_idx ext4: don't call ext4_should_journal_data() on the journal inode ext4: Fix WARN_ON_ONCE in ext4_commit_super() ext4: fix deadlock during page writeback ext4: correct error value of function verifying dx checksum ext4: avoid modifying checksum fields directly during checksum verification ext4: check for extents that wrap around jbd2: make journal y2038 safe jbd2: track more dependencies on transaction commit jbd2: move lockdep tracking to journal_s jbd2: move lockdep instrumentation for jbd2 handles ext4: respect the nobarrier mount option in nojournal mode ...
2016-06-30jbd2: make journal y2038 safeArnd Bergmann
The jbd2 journal stores the commit time in 64-bit seconds and 32-bit nanoseconds, which avoids an overflow in 2038, but it gets the numbers from current_kernel_time(), which uses 'long' seconds on 32-bit architectures. This simply changes the code to call current_kernel_time64() so we use 64-bit seconds consistently. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-24jbd2: add support for avoiding data writes during transaction commitsJan Kara
Currently when filesystem needs to make sure data is on permanent storage before committing a transaction it adds inode to transaction's inode list. During transaction commit, jbd2 writes back all dirty buffers that have allocated underlying blocks and waits for the IO to finish. However when doing writeback for delayed allocated data, we allocate blocks and immediately submit the data. Thus asking jbd2 to write dirty pages just unnecessarily adds more work to jbd2 possibly writing back other redirtied blocks. Add support to jbd2 to allow filesystem to ask jbd2 to only wait for outstanding data writes before committing a transaction and thus avoid unnecessary writes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-22jbd2: save some atomic ops in __JI_COMMIT_RUNNING handlingJan Kara
Currently we used atomic bit operations to manipulate __JI_COMMIT_RUNNING bit. However this is unnecessary as i_flags are always written and read under j_list_lock. So just change the operations to standard bit operations. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: unify revoke and tag block checksum handlingJan Kara
Revoke and tag descriptor blocks are just different kinds of descriptor blocks and thus have checksum in the same place. Unify computation and checking of checksums for these. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: factor out common descriptor block initializationJan Kara
Descriptor block header is initialized in several places. Factor out the common code into jbd2_journal_get_descriptor_buffer(). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: remove unnecessary arguments of jbd2_journal_write_revoke_recordsJan Kara
jbd2_journal_write_revoke_records() takes journal pointer and write_op, although journal can be obtained from the passed transaction and write_op is always WRITE_SYNC. Remove these superfluous arguments. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17jbd2: clean up feature test macros with predicate functionsDarrick J. Wong
Create separate predicate functions to test/set/clear feature flags, thereby replacing the wordy old macros. Furthermore, clean out the places where we open-coded feature tests. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-07-28jbd2: avoid infinite loop when destroying aborted journalJan Kara
Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal superblock fails" changed jbd2_cleanup_journal_tail() to return EIO when the journal is aborted. That makes logic in jbd2_log_do_checkpoint() bail out which is fine, except that jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make a progress in cleaning the journal. Without it jbd2_journal_destroy() just loops in an infinite loop. Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of jbd2_log_do_checkpoint() fails with error. Reported-by: Eryu Guan <guaneryu@gmail.com> Tested-by: Eryu Guan <guaneryu@gmail.com> Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-08-28jbd2: fix descriptor block size handling errors with journal_csumDarrick J. Wong
It turns out that there are some serious problems with the on-disk format of journal checksum v2. The foremost is that the function to calculate descriptor tag size returns sizes that are too big. This causes alignment issues on some architectures and is compounded by the fact that some parts of jbd2 use the structure size (incorrectly) to determine the presence of a 64bit journal instead of checking the feature flags. Therefore, introduce journal checksum v3, which enlarges the descriptor block tag format to allow for full 32-bit checksums of journal blocks, fix the journal tag function to return the correct sizes, and fix the jbd2 recovery code to use feature flags to determine 64bitness. Add a few function helpers so we don't have to open-code quite so many pieces. Switching to a 16-byte block size was found to increase journal size overhead by a maximum of 0.1%, to convert a 32-bit journal with no checksumming to a 32-bit journal with checksum v3 enabled. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reported-by: TR Reardon <thomas_reardon@hotmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-08jbd2: add transaction to checkpoint list earlierTheodore Ts'o
We don't otherwise need j_list_lock during the rest of commit phase #7, so add the transaction to the checkpoint list at the very end of commit phase #6. This allows us to drop j_list_lock earlier, which is a good thing since it is a super hot lock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-08jbd2: calculate statistics without holding j_state_lock and j_list_lockTheodore Ts'o
The two hottest locks, and thus the biggest scalability bottlenecks, in the jbd2 layer, are the j_list_lock and j_state_lock. This has inspired some people to do some truly unnatural things[1]. [1] https://www.usenix.org/system/files/conference/fast14/fast14-paper_kang.pdf We don't need to be holding both j_state_lock and j_list_lock while calculating the journal statistics, so move those calculations to the very end of jbd2_journal_commit_transaction. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-08jbd2: don't unplug after writing revoke recordsTheodore Ts'o
During commit process, keep the block device plugged after we are done writing the revoke records, until we are finished writing the rest of the commit records in the journal. This will allow most of the journal blocks to be written in a single I/O operation, instead of separating the the revoke blocks from the rest of the journal blocks. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-08-28jbd2: Fix endian mixing problems in the checksumming codeDarrick J. Wong
In the jbd2 checksumming code, explicitly declare separate variables with endianness information so that we don't get confused and screw things up again. Also fixes sparse warnings. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-12jbd2: fix duplicate debug label for phase 2Paul Gortmaker
Currently we see this output: $git grep phase fs/jbd2 fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 1\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 2\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 2\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 3\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 4\n"); [...] There is clearly a duplicate label for phase 2, and they are both active (i.e. not in #if ... #else block). Rename them to be "2a" and "2b" so the debug output is unambiguous. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-12jbd2: relocate assert after state lock in journal_commit_transaction()Paul Gortmaker
The state lock is taken after we are doing an assert on the state value, not before. So we might in fact be doing an assert on a transient value. Ensure the state check is within the scope of the state lock being taken. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04jbd2: transaction reservation supportJan Kara
In some cases we cannot start a transaction because of locking constraints and passing started transaction into those places is not handy either because we could block transaction commit for too long. Transaction reservation is designed to solve these issues. It reserves a handle with given number of credits in the journal and the handle can be later attached to the running transaction without blocking on commit or checkpointing. Reserved handles do not block transaction commit in any way, they only reduce maximum size of the running transaction (because we have to always be prepared to accomodate request for attaching reserved handle). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04jbd2: refine waiting for shadow buffersJan Kara
Currently when we add a buffer to a transaction, we wait until the buffer is removed from BJ_Shadow list (so that we prevent any changes to the buffer that is just written to the journal). This can take unnecessarily long as a lot happens between the time the buffer is submitted to the journal and the time when we remove the buffer from BJ_Shadow list. (e.g. We wait for all data buffers in the transaction, we issue a cache flush, etc.) Also this creates a dependency of do_get_write_access() on transaction commit (namely waiting for data IO to complete) which we want to avoid when implementing transaction reservation. So we modify commit code to set new BH_Shadow flag when temporary shadowing buffer is created and we clear that flag once IO on that buffer is complete. This allows do_get_write_access() to wait only for BH_Shadow bit and thus removes the dependency on data IO completion. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04jbd2: remove journal_head from descriptor buffersJan Kara
Similarly as for metadata buffers, also log descriptor buffers don't really need the journal head. So strip it and remove BJ_LogCtl list. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04jbd2: don't create journal_head for temporary journal buffersJan Kara
When writing metadata to the journal, we create temporary buffer heads for that task. We also attach journal heads to these buffer heads but the only purpose of the journal heads is to keep buffers linked in transaction's BJ_IO list. We remove the need for journal heads by reusing buffer_head's b_assoc_buffers list for that purpose. Also since BJ_IO list is just a temporary list for transaction commit, we use a private list in jbd2_journal_commit_transaction() for that thus removing BJ_IO list from transaction completely. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>