summaryrefslogtreecommitdiff
path: root/fs/nfs/nfs2xdr.c
AgeCommit message (Collapse)Author
2023-08-30NFS: Guard against READDIR loop when entry names exceed MAXNAMELENBenjamin Coddington
Commit 64cfca85bacd asserts the only valid return values for nfs2/3_decode_dirent should not include -ENAMETOOLONG, but for a server that sends a filename3 which exceeds MAXNAMELEN in a READDIR response the client's behavior will be to endlessly retry the operation. We could map -ENAMETOOLONG into -EBADCOOKIE, but that would produce truncated listings without any error. The client should return an error for this case to clearly assert that the server implementation must be corrected. Fixes: 64cfca85bacd ("NFS: Return valid errors from nfs2/3_decode_dirent()") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-03-02NFS: Optimise away the previous cookie fieldTrond Myklebust
Replace the 'previous cookie' field in struct nfs_entry with the array->last_cookie. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2022-02-28NFS: Return valid errors from nfs2/3_decode_dirent()Trond Myklebust
Valid return values for decode_dirent() callback functions are: 0: Success -EBADCOOKIE: End of directory -EAGAIN: End of xdr_stream All errors need to map into one of those three values. Fixes: 573c4e1ef53a ("NFS: Simplify ->decode_dirent() calling sequence") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02SUNRPC: Clean up the handling of page padding in rpc_prepare_reply_pages()Trond Myklebust
rpc_prepare_reply_pages() currently expects the 'hdrsize' argument to contain the length of the data that we expect to want placed in the head kvec plus a count of 1 word of padding that is placed after the page data. This is very confusing when trying to read the code, and sometimes leads to callers adding an arbitrary value of '1' just in order to satisfy the requirement (whether or not the page data actually needs such padding). This patch aims to clarify the code by changing the 'hdrsize' argument to remove that 1 word of padding. This means we need to subtract the padding from all the existing callers. Fixes: 02ef04e432ba ("NFS: Account for XDR pad of buf->pages") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-01-15nfs: remove timespec from xdr_encode_nfstimeArnd Bergmann
For NFSv2 and NFSv3, timestamps are stored using 32-bit entities and overflow in y2038. For historic reasons we truncate the 64-bit timestamps by converting from a timespec64 to a timespec first. Remove this unnecessary conversion step and do the truncation in the final functions that take a timestamp. This is transparent to users, but avoids one of the last uses of 'timespec' and lets us remove it later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-11-03NFSv2: Clean up timespec encodeTrond Myklebust
Simplify the struct iattr timestamp encoding by skipping the step of an intermediate struct timespec. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-11-03NFSv2: Fix a typo in encode_sattr()Trond Myklebust
Encode the mtime correctly. Fixes: 95582b0083883 ("vfs: change inode times to use struct timespec64") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-11-03NFS: Convert struct nfs_fattr to use struct timespec64Trond Myklebust
NFSv4 supports 64-bit times, so we should switch to using struct timespec64 when decoding attributes. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-09NFS: Record task, client ID, and XID in xdr_status trace pointsChuck Lever
When triggering an nfs_xdr_status trace point, record the task ID and XID of the failing RPC to better pinpoint the problem. This feels like a bit of a layering violation. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-04-26NFS: Convert NFSv2 to use the container user namespaceTrond Myklebust
When mapping NFS identities, we want to substitute for the uids and gids on the wire as we would for the AUTH_UNIX creds. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14NFS: Account for XDR pad of buf->pagesChuck Lever
Certain NFS results (eg. READLINK) might expect a data payload that is not an exact multiple of 4 bytes. In this case, XDR encoding is required to pad that payload so its length on the wire is a multiple of 4 bytes. The constants that define the maximum size of each NFS result do not appear to account for this extra word. In each case where the data payload is to be received into pages: - 1 word is added to the size of the receive buffer allocated by call_allocate - rpc_inline_rcv_pages subtracts 1 word from @hdrsize so that the extra buffer space falls into the rcv_buf's tail iovec - If buf->pagelen is word-aligned, an XDR pad is not needed and is thus removed from the tail Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Introduce rpc_prepare_reply_pages()Chuck Lever
prepare_reply_buffer() and its NFSv4 equivalents expose the details of the RPC header and the auth slack values to upper layer consumers, creating a layering violation, and duplicating code. Remedy these issues by adding a new RPC client API that hides those details from upper layers in a common helper function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13NFS: Add trace events to report non-zero NFS status codesChuck Lever
These can help field troubleshooting without needing the overhead of a full network capture (ie, tcpdump). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13NFS: Remove print_overflow_msg()Chuck Lever
This issue is now captured by a trace point in the RPC client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-13NFS: convert flags to boolBenjamin Coddington
NFS uses some int, and unsigned int :1, and bool as flags in structs and args. Assert the preference for uniformly replacing these with the bool type. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-07-13sunrpc: mark all struct rpc_procinfo instances as constChristoph Hellwig
struct rpc_procinfo contains function pointers, and marking it as constant avoids it being able to be used as an attach vector for code injections. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-07-13sunrpc: move p_count out of struct rpc_procinfoChristoph Hellwig
p_count is the only writeable memeber of struct rpc_procinfo, which is a good candidate to be const-ified as it contains function pointers. This patch moves it into out out struct rpc_procinfo, and into a separate writable array that is pointed to by struct rpc_version and indexed by p_statidx. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-13nfs: fix decoder callback prototypesChristoph Hellwig
Declare the p_decode callbacks with the proper prototype instead of casting to kxdrdproc_t and losing all type safety. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-07-13nfs: fix encoder callback prototypesChristoph Hellwig
Declare the p_encode callbacks with the proper prototype instead of casting to kxdreproc_t and losing all type safety. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-03nfs: save server READ/WRITE/COMMIT statusPeng Tao
Flexfiles layout would want to use them to report DS IO status. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2014-05-28NFS: Create a common results structure for reads and writesAnna Schumaker
Reads and writes have very similar results. This patch combines the two structs together with comments to show where the differing fields are used. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-28NFS: Create a common argument structure for reads and writesAnna Schumaker
Reads and writes have very similar arguments. This patch combines them together and documents the few fields used only by write. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-02-13nfs: Convert nfs2xdr to use kuids and kgidsEric W. Biederman
When reading uids and gids off the wire convert them to kuids and kgids. When putting kuids and kgids onto the wire first convert them to uids and gids the other side will understand. Add an additional failure mode for incoming uid or gids that are invalid. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-04NFS: Remove asserts from the NFS XDR codeTrond Myklebust
Convert the ones that are not trivial to check into WARN_ON_ONCE(). Remove checks for things such as NFS2_MAXPATHLEN, which are trivially done by the caller. Add a comment to the case of nfs3_xdr_enc_setacl3args. What is being done there is just wrong... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28NFS: Let xdr_read_pages() check for buffer overflowsTrond Myklebust
xdr_read_pages will already do all of the buffer overflow checks that are currently being open-coded in the various callers. This patch simplifies the existing code by replacing the open coded checks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-24NFSv2/v3: Remove incorrect dprintks from the readdir reply codeTrond Myklebust
The actual size of the directory is unknown to the client, so it is always requesting the maximum number it can handle. If the server is replying with fewer entries than was requested, then that will usually reflect the fact that we've hit the end of the directory. Flagging it as an error is therefore incorrect. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Create an NFS v3 stat_to_errno()Bryan Schumaker
In theory, NFS v3 can have different error versions than NFS v2. v4 is already using its own nfs4_stat_to_errno() to map error codes, so rather than create something in the generic client for v2 and v3 to share I instead give v3 its own function. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-01NFSv2/v3: Simulate the change attributeTrond Myklebust
Use the ctime to simulate a change attribute for NFSv2 and NFSv3. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-31SUNRPC: constify the rpc_programTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-10Merge branch 'bugfixes' into nfs-for-2.6.38Trond Myklebust
Conflicts: fs/nfs/nfs2xdr.c fs/nfs/nfs3xdr.c fs/nfs/nfs4xdr.c
2011-01-10NFS: Don't use vm_map_ram() in readdirTrond Myklebust
vm_map_ram() is not available on NOMMU platforms, and causes trouble on incoherrent architectures such as ARM when we access the page data through both the direct and the virtual mapping. The alternative is to use the direct mapping to access page data for the case when we are not crossing a page boundary, but to copy the data into a linear scratch buffer when we are accessing data that spans page boundaries. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: stable@kernel.org [2.6.37]
2010-12-16SUNRPC: New xdr_streams XDR decoder APIChuck Lever
Now that all client-side XDR decoder routines use xdr_streams, there should be no need to support the legacy calling sequence [rpc_rqst *, __be32 *, RPC res *] anywhere. We can construct an xdr_stream in the generic RPC code, instead of in each decoder function. This is a refactoring change. It should not cause different behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16SUNRPC: New xdr_streams XDR encoder APIChuck Lever
Now that all client-side XDR encoder routines use xdr_streams, there should be no need to support the legacy calling sequence [rpc_rqst *, __be32 *, RPC arg *] anywhere. We can construct an xdr_stream in the generic RPC code, instead of in each encoder function. Also, all the client-side encoder functions return 0 now, making a return value superfluous. Take this opportunity to convert them to return void instead. This is a refactoring change. It should not cause different behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Simplify ->decode_dirent() calling sequenceChuck Lever
Clean up. The pointer returned by ->decode_dirent() is no longer used as a pointer. The only call site (xdr_decode() in fs/nfs/dir.c) simply extracts the errno value encoded in the pointer. Replace the returned pointer with a standard integer errno return value. Also, pass the "server" argument as part of the nfs_entry instead of as a separate parameter. It's faster to derive "server" in nfs_readdir_xdr_to_array() since we already have the directory's inode handy. "server" ought to be invariant for a set of entries in the same directory, right? The legacy versions of decode_dirent() don't use "server" anyway, so it's wasted work for them to derive and pass "server" for each entry. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Repair whitespace damage in NFS PROC macroChuck Lever
Clean up. When I was making other changes in this area, checkscript.pl complained about the use of leading blanks in the PROC macros in the xdr files. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Move and update xdr_decode_foo() functions that we're keepingChuck Lever
Clean up. Move the timestamp decoder to match the placement and naming conventions of the other helpers. Fold xdr_decode_fattr() into decode_fattr(), which is now it's only user. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Replace old NFSv2 decoder functions with xdr_stream-based onesChuck Lever
Clean up. Remove unused legacy result decoder functions, and any now unused decoder helper functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Introduce new-style XDR decoding functions for NFSv2Chuck Lever
We'd like to prevent local buffer overflows caused by malicious or broken servers. New xdr_stream style decoders can do that. For efficiency, we also eventually want to be able to pass xdr_streams from call_decode() to all XDR decoding functions, rather than building an xdr_stream in every XDR decoding function in the kernel. nfs_decode_dirent() is renamed to follow the naming convention of the other two dirent decoders. Static helper functions are left without the "inline" directive. This allows the compiler to choose automatically how to optimize these for size or speed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Use the "nfs_stat" enum for nfs_stat_to_errno()'s argumentChuck Lever
Clean up. To distinguish more clearly between the on-the-wire NFSERR_ value and our local errno values, use the proper type for the argument of nfs_stat_to_errno(). Add a documenting comment appropriate for a global function shared outside this source file. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Update xdr_encode_foo() functions that we're keepingChuck Lever
Clean up. The new helper functions are kept in order by section of RFC 1094. Move the two timestamp encoders we're keeping, update their coding style, and refresh their documenting comments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Remove old NFSv2 encoder functionsChuck Lever
Clean up: Remove unused legacy argument encoder functions, and any now unused encoder helper functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16NFS: Introduce new-style XDR encoding functions for NFSv2Chuck Lever
We're interested in taking advantage of the safety benefits of xdr_streams. These data structures allow more careful checking for buffer overflow while encoding. More careful type checking is also introduced in the new functions. For efficiency, we also eventually want to be able to pass xdr_streams from call_encode() to all XDR encoding functions, rather than building an xdr_stream in every XDR encoding function in the kernel. To do this means all encoders must be ready to handle a passed-in xdr_stream. The new encoders follow the modern paradigm for XDR encoders: BUG on any error, and always return a zero status code. Static helper functions are left without the "inline" directive. This allows the compiler to choose automatically how to optimize these for size or speed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-11-22NFS: Ensure we return the dirent->d_type when it is knownTrond Myklebust
Store the dirent->d_type in the struct nfs_cache_array_entry so that we can use it in getdents() calls. This fixes a regression with the new readdir code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-11-22NFS: Buffer overflow in ->decode_dirent() should not be fatalTrond Myklebust
Overflowing the buffer in the readdir ->decode_dirent() should not lead to a fatal error, but rather to an attempt to reread the record in question. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-11-15NFS: readdir shouldn't read beyond the reply returned by the serverTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: Readdir plus in v4Bryan Schumaker
By requsting more attributes during a readdir, we can mimic the readdir plus operation that was in NFSv3. To test, I ran the command `ls -lU --color=none` on directories with various numbers of files. Without readdir plus, I see this: n files | 100 | 1,000 | 10,000 | 100,000 | 1,000,000 --------+-----------+-----------+-----------+-----------+---------- real | 0m00.153s | 0m00.589s | 0m05.601s | 0m56.691s | 9m59.128s user | 0m00.007s | 0m00.007s | 0m00.077s | 0m00.703s | 0m06.800s sys | 0m00.010s | 0m00.070s | 0m00.633s | 0m06.423s | 1m10.005s access | 3 | 1 | 1 | 4 | 31 getattr | 2 | 1 | 1 | 1 | 1 lookup | 104 | 1,003 | 10,003 | 100,003 | 1,000,003 readdir | 2 | 16 | 158 | 1,575 | 15,749 total | 111 | 1,021 | 10,163 | 101,583 | 1,015,784 With readdir plus enabled, I see this: n files | 100 | 1,000 | 10,000 | 100,000 | 1,000,000 --------+-----------+-----------+-----------+-----------+---------- real | 0m00.115s | 0m00.206s | 0m01.079s | 0m12.521s | 2m07.528s user | 0m00.003s | 0m00.003s | 0m00.040s | 0m00.290s | 0m03.296s sys | 0m00.007s | 0m00.020s | 0m00.120s | 0m01.357s | 0m17.556s access | 3 | 1 | 1 | 1 | 7 getattr | 2 | 1 | 1 | 1 | 1 lookup | 4 | 3 | 3 | 3 | 3 readdir | 6 | 62 | 630 | 6,300 | 62,993 total | 15 | 67 | 635 | 6,305 | 63,004 Readdir plus disabled has about a 16x increase in the number of rpc calls and is 4 - 5 times slower on large directories. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: remove page size checking codeBryan Schumaker
Remove the page size checking code for a readdir decode. This is now done by decode_dirent with xdr_streams. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-23NFS: decode_dirent should use an xdr_streamBryan Schumaker
Convert nfs*xdr.c to use an xdr stream in decode_dirent. This will prevent a kernel oops that has been occuring when reading a vmapped page. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>