summaryrefslogtreecommitdiff
path: root/fs/nfs/nfs4namespace.c
AgeCommit message (Collapse)Author
2019-02-20NFS: Fix up documentation warningsTrond Myklebust
Fix up some compiler warnings about function parameters, etc not being correctly described or formatted. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-01-14nfs: Referrals should use the same proto setting as their parentChuck Lever
Helen Chao <helen.chao@oracle.com> noticed that when a user traverses a referral on an NFS/RDMA mount, the resulting submount always uses TCP. This behavior does not match the vers= setting when traversing a referral (vers=4.1 is preserved). It also does not match the behavior of crossing from the pseudofs into a real filesystem (proto=rdma is preserved in that case). The Linux NFS client does not currently support the fs_locations_info attribute. The situation is similar for all NFSv4 servers I know of. Therefore until the community has broad support for fs_locations_info, when following a referral: - First try to connect with RPC-over-RDMA. This will fail quickly if the client has no RDMA-capable interfaces. - If connecting with RPC-over-RDMA fails, or the RPC-over-RDMA transport is not available, use TCP. Reported-by: Helen Chao <helen.chao@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-20NFS: Remove extra dprintk()s from nfs4namespace.cAnna Schumaker
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-02-02fs: Better permission checking for submountsEric W. Biederman
To support unprivileged users mounting filesystems two permission checks have to be performed: a test to see if the user allowed to create a mount in the mount namespace, and a test to see if the user is allowed to access the specified filesystem. The automount case is special in that mounting the original filesystem grants permission to mount the sub-filesystems, to any user who happens to stumble across the their mountpoint and satisfies the ordinary filesystem permission checks. Attempting to handle the automount case by using override_creds almost works. It preserves the idea that permission to mount the original filesystem is permission to mount the sub-filesystem. Unfortunately using override_creds messes up the filesystems ordinary permission checks. Solve this by being explicit that a mount is a submount by introducing vfs_submount, and using it where appropriate. vfs_submount uses a new mount internal mount flags MS_SUBMOUNT, to let sget and friends know that a mount is a submount so they can take appropriate action. sget and sget_userns are modified to not perform any permission checks on submounts. follow_automount is modified to stop using override_creds as that has proven problemantic. do_mount is modified to always remove the new MS_SUBMOUNT flag so that we know userspace will never by able to specify it. autofs4 is modified to stop using current_real_cred that was put in there to handle the previous version of submount permission checking. cifs is modified to pass the mountpoint all of the way down to vfs_submount. debugfs is modified to pass the mountpoint all of the way down to trace_automount by adding a new parameter. To make this change easier a new typedef debugfs_automount_t is introduced to capture the type of the debugfs automount function. Cc: stable@vger.kernel.org Fixes: 069d5ac9ae0d ("autofs: Fix automounts by using current_real_cred()->uid") Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds") Reviewed-by: Trond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-07-20qstr: constify instances in nfsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-24NFSv4: test SECINFO RPC_AUTH_GSS pseudoflavors for supportAndy Adamson
Fix nfs4_negotiate_security to create an rpc_clnt used to test each SECINFO returned pseudoflavor. Check credential creation (and gss_context creation) which is important for RPC_AUTH_GSS pseudoflavors which can fail for multiple reasons including mis-configuration. Don't call nfs4_negotiate in nfs4_submount as it was just called by nfs4_proc_lookup_mountpoint (nfs4_proc_lookup_common) Signed-off-by: Andy Adamson <andros@netapp.com> [Trond: fix corrupt return value from nfs_find_best_sec()] Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-06-24NFS Return -EPERM if no supported or matching SECINFO flavorAndy Adamson
Do not return RPC_AUTH_UNIX if SEINFO reply tests fail. This prevents an infinite loop of NFS4ERR_WRONGSEC for non RPC_AUTH_UNIX mounts. Without this patch, a mount with no sec= option to a server that does not include RPC_AUTH_UNIX in the SECINFO return can be presented with an attemtp to use RPC_AUTH_UNIX which will result in an NFS4ERR_WRONG_SEC which will prompt the SECINFO call which will again try RPC_AUTH_UNIX.... Signed-off-by: Andy Adamson <andros@netapp.com> Tested-By: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-06-24NFS check the return of nfs4_negotiate_security in nfs4_submountAndy Adamson
Signed-off-by: Andy Adamson <andros@netapp.com> Tested-By: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-02-17NFSv4: Use the correct net namespace in nfs4_update_serverTrond Myklebust
We need to use the same net namespace that was used to resolve the hostname and sockaddr arguments. Fixes: 32e62b7c3ef09 (NFS: Add nfs4_update_server) Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
2013-10-28NFS: add support for multiple sec= mount optionsWeston Andros Adamson
This patch adds support for multiple security options which can be specified using a colon-delimited list of security flavors (the same syntax as nfsd's exports file). This is useful, for instance, when NFSv4.x mounts cross SECINFO boundaries. With this patch a user can use "sec=krb5i,krb5p" to mount a remote filesystem using krb5i, but can still cross into krb5p-only exports. New mounts will try all security options before failing. NFSv4.x SECINFO results will be compared against the sec= flavors to find the first flavor in both lists or if no match is found will return -EPERM. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28NFS: stop using NFS_MOUNT_SECFLAVOUR server flagWeston Andros Adamson
Since the parsed sec= flavor is now stored in nfs_server->auth_info, we no longer need an nfs_server flag to determine if a sec= option was used. This flag has not been completely removed because it is still needed for the (old but still supported) non-text parsed mount options ABI compatability. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28NFSv4: make nfs_find_best_sec staticWeston Andros Adamson
It's not used outside of nfs4namespace.c anymore. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-28NFS: Add functions to swap transports during migration recoveryChuck Lever
Introduce functions that can walk through an array of returned fs_locations information and connect a transport to one of the destination servers listed therein. Note that NFS minor version 1 introduces "fs_locations_info" which extends the locations array sorting criteria available to clients. This is not supported yet. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-10-24nfs: use %p[dD] instead of open-coded (and often racy) equivalentsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-07NFSv4: Allow security autonegotiation for submountsTrond Myklebust
In cases where the parent super block was not mounted with a 'sec=' line, allow autonegotiation of security for the submounts. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-03-29SUNRPC: Introduce rpcauth_get_pseudoflavor()Chuck Lever
A SECINFO reply may contain flavors whose kernel module is not yet loaded by the client's kernel. A new RPC client API, called rpcauth_get_pseudoflavor(), is introduced to do proper checking for support of a security flavor. When this API is invoked, the RPC client now tries to load the module for each flavor first before performing the "is this supported?" check. This means if a module is available on the client, but has not been loaded yet, it will be loaded and registered automatically when the SECINFO reply is processed. The new API can take a full GSS tuple (OID, QoP, and service). Previously only the OID and service were considered. nfs_find_best_sec() is updated to verify all flavors requested in a SECINFO reply, including AUTH_NULL and AUTH_UNIX. Previously these two flavors were simply assumed to be supported without consulting the RPC client. Note that the replaced version of nfs_find_best_sec() can return RPC_AUTH_MAXFLAVOR if the server returns a recognized OID but an unsupported "service" value. nfs_find_best_sec() now returns RPC_AUTH_UNIX in this case. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-03-29SUNRPC: Define rpcsec_gss_info structureChuck Lever
The NFSv4 SECINFO procedure returns a list of security flavors. Any GSS flavor also has a GSS tuple containing an OID, a quality-of- protection value, and a service value, which specifies a particular GSS pseudoflavor. For simplicity and efficiency, I'd like to return each GSS tuple from the NFSv4 SECINFO XDR decoder and pass it straight into the RPC client. Define a data structure that is visible to both the NFS client and the RPC client. Take structure and field names from the relevant standards to avoid confusion. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-02-05sunrpc: move address copy/cmp/convert routines and prototypes from clnt.h to ↵Jeff Layton
addr.h These routines are used by server and client code, so having them in a separate header would be best. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-10-31nfs: Show original device name verbatim in /proc/*/mount{s,info}Ben Hutchings
Since commit c7f404b ('vfs: new superblock methods to override /proc/*/mount{s,info}'), nfs_path() is used to generate the mounted device name reported back to userland. nfs_path() always generates a trailing slash when the given dentry is the root of an NFS mount, but userland may expect the original device name to be returned verbatim (as it used to be). Make this canonicalisation optional and change the callers accordingly. [jrnieder@gmail.com: use flag instead of bool argument] Reported-and-tested-by: Chris Hiestand <chiestand@salk.edu> Reference: http://bugs.debian.org/669314 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v2.6.39+ Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-01SUNRPC: Introduce rpc_clone_client_set_auth()Chuck Lever
An ULP is supposed to be able to replace a GSS rpc_auth object with another GSS rpc_auth object using rpcauth_create(). However, rpcauth_create() in 3.5 reliably fails with -EEXIST in this case. This is because when gss_create() attempts to create the upcall pipes, sometimes they are already there. For example if a pipe FS mount event occurs, or a previous GSS flavor was in use for this rpc_clnt. It turns out that's not the only problem here. While working on a fix for the above problem, we noticed that replacing an rpc_clnt's rpc_auth is not safe, since dereferencing the cl_auth field is not protected in any way. So we're deprecating the ability of rpcauth_create() to switch an rpc_clnt's security flavor during normal operation. Instead, let's add a fresh API that clones an rpc_clnt and gives the clone a new flavor before it's used. This makes immediate use of the new __rpc_clone_client() helper. This can be used in a similar fashion to rpcauth_create() when a client is hunting for the correct security flavor. Instead of replacing an rpc_clnt's security flavor in a loop, the ULP replaces the whole rpc_clnt. To fix the -EEXIST problem, any ULP logic that relies on replacing an rpc_clnt's rpc_auth with rpcauth_create() must be changed to use this API instead. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-25NFS4: avoid underflow when converting error to pointer.NeilBrown
In nfs4_create_sec_client, 'flavor' can hold a negative error code (returned from nfs4_negotiate_security), even though it is an 'enum' and hence unsigned. The code is careful to cast it to an (int) before testing if it is negative, however it doesn't cast to an (int) before calling ERR_PTR. On a machine where "void*" is larger than "int", this results in the unsigned equivalent of -1 (e.g. 0xffffffff) being converted to a pointer. Subsequent code determines that this is not negative, and so dereferences it with predictable results. So: cast 'flavor' to a (signed) int before passing to ERR_PTR. cc: Benny Halevy <bhalevy@tonian.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-25NFS: fix the return value check by using IS_ERRWei Yongjun
In case of error, the function rpcauth_create() returns ERR_PTR() and never returns NULL pointer. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-21Merge branch 'bugfixes' into nfs-for-nextTrond Myklebust
2012-05-16NFS: fix unsigned comparison in nfs4_create_sec_clientBenny Halevy
fs/nfs/nfs4namespace.c: In function ‘nfs4_create_sec_client’: fs/nfs/nfs4namespace.c:171:2: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] Introduced by commit 72de53ec4bca39c26709122a8f78bfefe7b6bca4 "NFS: Do secinfo as part of lookup" Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27NFS: Create a submount rpc_opBryan Schumaker
This simplifies the code for v2 and v3 and gives v4 a chance to decide on referrals without needing to modify the generic client. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27NFS: Remove secinfo knowledge out of the generic clientBryan Schumaker
And also remove the unneeded rpc_op. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27NFS: Fix following referral mount points with different securityBryan Schumaker
I create a new proc_lookup_mountpoint() to use when submounting an NFS v4 share. This function returns an rpc_clnt to use for performing an fs_locations() call on a referral's mountpoint. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27NFS: Do secinfo as part of lookupBryan Schumaker
Whenever lookup sees wrongsec do a secinfo and retry the lookup to find attributes of the file or directory, such as "is this a referral mountpoint?". This also allows me to remove handling -NFS4ERR_WRONSEC as part of getattr xdr decoding. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-26nfs4: fix referrals on mounts that use IPv6 addrsWeston Andros Adamson
All referrals (IPv4 addr, IPv6 addr, and DNS) are broken on mounts of IPv6 addresses, because validation code uses a path that is parsed from the dev_name ("<server>:<path>") by splitting on the first colon and colons are used in IPv6 addrs. This patch ignores colons within IPv6 addresses that are escaped by '[' and ']'. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-02SUNRPC: Use RCU to dereference the rpc_clnt.cl_xprt fieldTrond Myklebust
A migration event will replace the rpc_xprt used by an rpc_clnt. To ensure this can be done safely, all references to cl_xprt must now use a form of rcu_dereference(). Special care is taken with rpc_peeraddr2str(), which returns a pointer to memory whose lifetime is the same as the rpc_xprt. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> [ cel: fix lockdep splats and layering violations ] [ cel: forward ported to 3.4 ] [ cel: remove rpc_max_reqs(), add rpc_net_ns() ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-06NFS: pass transport net to rpc_pton() while parse server nameStanislav Kinsbursky
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-31SUNRPC: parametrize rpc_pton() by network contextStanislav Kinsbursky
Parametrize rpc_pton() by network context and thus force it's callers to pass in network context instead of using hard-coded "init_net". Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-31NFS: DNS resolver cache per network namespace context introducedStanislav Kinsbursky
This patch implements DNS resolver cache creation and registration for each alive network namespace context. This was done by registering NFS per-net operations, responsible for DNS cache allocation/register and unregister/destructioning instead of initialization and destruction of static "nfs_dns_resolve" cache detail (this one was removed). Pointer to network dns resolver cache is stored in new per-net "nfs_net" structure. This patch also changes nfs_dns_resolve_name() function prototype (and it's calls) by adding network pointer parameter, which is used to get proper DNS resolver cache pointer for do_cache_lookup_wait() call. Note: empty nfs_dns_resolver_init() and nfs_dns_resolver_destroy() functions will be used in next patch in the series. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-16nfs: nfs_do_{ref,sub}mount() superblock argument is redundantAl Viro
It's always equal to dentry->d_sb Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-16nfs: make nfs_path() work without vfsmountAl Viro
part 3: now we have everything to get nfs_path() just by dentry - just follow to (disconnected) root and pick the rest of the thing there. Start killing propagation of struct vfsmount * on the paths that used to bring it to nfs_path(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-14NFSv4: Fix up the documentation for nfs_do_refmountTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14NFSv4: Reduce the stack footprint of try_location()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-10-06NFSv4: Fix the referral mount codeTrond Myklebust
Fix a typo which causes try_location() to use the wrong length argument when calling nfs_parse_server_name(). This again, causes the initialisation of the mount's sockaddr structure to fail. Also ensure that if nfs4_pathname_string() returns an error, then we pass that error back up the stack instead of ENOENT. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-19NFS: Use the DNS resolver in the mount code.Trond Myklebust
In the referral code, use it to look up the new server's ip address if the fs_locations attribute contains a hostname. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09NFS: Replace nfs_set_port() with rpc_set_port()Chuck Lever
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09NFS: Replace nfs_parse_ip_address() with rpc_pton()Chuck Lever
Clean up: Use the common routine now provided in sunrpc.ko for parsing mount addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-10NFS: Fix misparsing of nfsv4 fs_locations attribute (take 2)Trond Myklebust
The changeset ea31a4437c59219bf3ea946d58984b01a45a289c (nfs: Fix misparsing of nfsv4 fs_locations attribute) causes the mountpath that is calculated at the beginning of try_location() to be clobbered when we later strncpy a non-nul terminated hostname using an incorrect buffer length. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07nfs: Fix misparsing of nfsv4 fs_locations attributeJ. Bruce Fields
The code incorrectly assumes here that the server name (or ip address) is null-terminated. This can cause referrals to fail in some cases. Also support ipv6 addresses. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07nfs: replace while loop by for loops in nfs_follow_referralJ. Bruce Fields
Whoever wrote this had a bizarre allergy to for loops. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07nfs: break up nfs_follow_referralJ. Bruce Fields
This function is a little longer and more deeply nested than necessary. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-05-16nfs: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>