summaryrefslogtreecommitdiff
path: root/fs/nfsd/nfs3xdr.c
AgeCommit message (Collapse)Author
2020-01-22nfsd: Ensure sampling of the write verifier is atomic with the writeTrond Myklebust
When doing an unstable write, we need to ensure that we sample the write verifier before releasing the lock, and allowing a commit to the same file to proceed. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-01-22nfsd: Ensure sampling of the commit verifier is atomic with the commitTrond Myklebust
When we have a successful commit, ensure we sample the commit verifier before releasing the lock. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-12-19nfsd: handle nfs3 timestamps as unsignedArnd Bergmann
The decode_time3 function behaves differently on 32-bit and 64-bit architectures: on the former, a 32-bit timestamp gets converted into an signed number and then into a timestamp between 1902 and 2038, while on the latter it is interpreted as unsigned in the range 1970-2106. Change all the remaining 'timespec' in nfsd to 'timespec64' to make the behavior the same, and use the current interpretation of the dominant 64-bit architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-11-15new helper: lookup_positive_unlocked()Al Viro
Most of the callers of lookup_one_len_unlocked() treat negatives are ERR_PTR(-ENOENT). Provide a helper that would do just that. Note that a pinned positive dentry remains positive - it's ->d_inode is stable, etc.; a pinned _negative_ dentry can become positive at any point as long as you are not holding its parent at least shared. So using lookup_one_len_unlocked() needs to be careful; lookup_positive_unlocked() is safer and that's what the callers end up open-coding anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-10nfsd: Support the server resetting the boot verifierTrond Myklebust
Add support to allow the server to reset the boot verifier in order to force clients to resend I/O after a timeout failure. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-24nfsd: knfsd must use the container user namespaceTrond Myklebust
Convert knfsd to use the user namespace of the container that started the server processes. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-05nfsd/nfsd3_proc_readdir: fix buffer count and page pointersMurphy Zhou
After this commit f875a79 nfsd: allow nfsv3 readdir request to be larger. nfsv3 readdir request size can be larger than PAGE_SIZE. So if the directory been read is large enough, we can use multiple pages in rq_respages. Update buffer count and page pointers like we do in readdirplus to make this happen. Now listing a directory within 3000 files will panic because we are counting in a wrong way and would write on random page. Fixes: f875a79 "nfsd: allow nfsv3 readdir request to be larger" Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-03-08nfsd: allow nfsv3 readdir request to be larger.NeilBrown
nfsd currently reports the NFSv3 dtpref FSINFO parameter to be PAGE_SIZE, so NFS clients will typically ask for one page of directory entries at a time. This is needlessly restrictive as nfsd can handle larger replies easily. Also, a READDIR request (but not a READDIRPLUS request) has the count size clipped to PAGE_SIE, again unnecessary. This patch lifts these limits so that larger readdir requests can be used. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-03-05nfsd: fix memory corruption caused by readdirNeilBrown
If the result of an NFSv3 readdir{,plus} request results in the "offset" on one entry having to be split across 2 pages, and is sized so that the next directory entry doesn't fit in the requested size, then memory corruption can happen. When encode_entry() is called after encoding the last entry that fits, it notices that ->offset and ->offset1 are set, and so stores the offset value in the two pages as required. It clears ->offset1 but *does not* clear ->offset. Normally this omission doesn't matter as encode_entry_baggage() will be called, and will set ->offset to a suitable value (not on a page boundary). But in the case where cd->buflen < elen and nfserr_toosmall is returned, ->offset is not reset. This means that nfsd3proc_readdirplus will see ->offset with a value 4 bytes before the end of a page, and ->offset1 set to NULL. It will try to write 8bytes to ->offset. If we are lucky, the next page will be read-only, and the system will BUG: unable to handle kernel paging request at... If we are unlucky, some innocent page will have the first 4 bytes corrupted. nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly writes 8 bytes to the offset wherever it is. Fix this by clearing ->offset after it is used, and copying the ->offset handling code from nfsd3_proc_readdirplus into nfsd3_proc_readdir. (Note that the commit hash in the Fixes tag is from the 'history' tree - this bug predates git). Fixes: 0b1d57cf7654 ("[PATCH] kNFSd: Fix nfs3 dentry encoding") Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654 Cc: stable@vger.kernel.org (v2.6.12+) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-04-03NFSD: Clean up legacy NFS SYMLINK argument XDR decodersChuck Lever
Move common code in NFSD's legacy SYMLINK decoders into a helper. The immediate benefits include: - one fewer data copies on transports that support DDP - consistent error checking across all versions - reduction of code duplication - support for both legal forms of SYMLINK requests on RDMA transports for all versions of NFS (in particular, NFSv2, for completeness) In the long term, this helper is an appropriate spot to perform a per-transport call-out to fill the pathname argument using, say, RDMA Reads. Filling the pathname in the proc function also means that eventually the incoming filehandle can be interpreted so that filesystem- specific memory can be allocated as a sink for the pathname argument, rather than using anonymous pages. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03NFSD: Clean up legacy NFS WRITE argument XDR decodersChuck Lever
Move common code in NFSD's legacy NFS WRITE decoders into a helper. The immediate benefit is reduction of code duplication and some nice micro-optimizations (see below). In the long term, this helper can perform a per-transport call-out to fill the rq_vec (say, using RDMA Reads). The legacy WRITE decoders and procs are changed to work like NFSv4, which constructs the rq_vec just before it is about to call vfs_writev. Why? Calling a transport call-out from the proc instead of the XDR decoder means that the incoming FH can be resolved to a particular filesystem and file. This would allow pages from the backing file to be presented to the transport to be filled, rather than presenting anonymous pages and copying or flipping them into the file's page cache later. I also prefer using the pages in rq_arg.pages, instead of pulling the data pages directly out of the rqstp::rq_pages array. This is currently the way the NFSv3 write decoder works, but the other two do not seem to take this approach. Fixing this removes the only reference to rq_pages found in NFSD, eliminating an NFSD assumption about how transports use the pages in rq_pages. Lastly, avoid setting up the first element of rq_vec as a zero- length buffer. This happens with an RDMA transport when a normal Read chunk is present because the data payload is in rq_arg's page list (none of it is in the head buffer). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-02-08nfsd: store stat times in fill_pre_wcc() instead of inode timesAmir Goldstein
The time values in stat and inode may differ for overlayfs and stat time values are the correct ones to use. This is also consistent with the fact that fill_post_wcc() also stores stat time values. This means introducing a stat call that could fail, where previously we were just copying values out of the inode. To be conservative about changing behavior, we fall back to copying values out of the inode in the error case. It might be better just to clear fh_pre_saved (though note the BUG_ON in set_change_info). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-18Merge tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "Lots of good bugfixes, including: - fix a number of races in the NFSv4+ state code - fix some shutdown crashes in multiple-network-namespace cases - relax our 4.1 session limits; if you've an artificially low limit to the number of 4.1 clients that can mount simultaneously, try upgrading" * tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits) SUNRPC: Improve ordering of transport processing nfsd: deal with revoked delegations appropriately svcrdma: Enqueue after setting XPT_CLOSE in completion handlers nfsd: use nfs->ns.inum as net ID rpc: remove some BUG()s svcrdma: Preserve CB send buffer across retransmits nfds: avoid gettimeofday for nfssvc_boot time fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t lockd: double unregister of inetaddr notifiers nfsd4: catch some false session retries nfsd4: fix cached replies to solo SEQUENCE compounds sunrcp: make function _svc_create_xprt static SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status nfsd: use ARRAY_SIZE nfsd: give out fewer session slots as limit approaches nfsd: increase DRC cache limit nfsd: remove unnecessary nofilehandle checks nfs_common: convert int to bool ...
2017-11-07nfds: avoid gettimeofday for nfssvc_boot timeArnd Bergmann
do_gettimeofday() is deprecated and we should generally use time64_t based functions instead. In case of nfsd, all three users of nfssvc_boot only use the initial time as a unique token, and are not affected by it overflowing, so they are not affected by the y2038 overflow. This converts the structure to timespec64 anyway and adds comments to all uses, to document that we have thought about it and avoid having to look at it again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-12nfsd4: factor ctime into change attributeJ. Bruce Fields
Factoring ctime into the nfsv4 change attribute gives us better properties than just i_version alone. Eventually we'll likely also expose this (as opposed to raw i_version) to userspace, at which point we'll want to move it to a common helper, called from either userspace or individual filesystems. For now, nfsd is the only user. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-06-28Merge tag 'v4.12-rc5' into nfsd treeJ. Bruce Fields
Update to get f0c3192ceee3 "virtio_net: lower limit on buffer size". That bug was interfering with my nfsd testing.
2017-05-16nfsd: Revert "nfsd: check for oversized NFSv2/v3 arguments"J. Bruce Fields
This reverts commit 51f567777799 "nfsd: check for oversized NFSv2/v3 arguments", which breaks support for NFSv3 ACLs. That patch was actually an earlier draft of a fix for the problem that was eventually fixed by e6838a29ecb "nfsd: check for oversized NFSv2/v3 arguments". But somehow I accidentally left this earlier draft in the branch that was part of my 2.12 pull request. Reported-by: Eryu Guan <eguan@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-05-15sunrpc: properly type pc_encode callbacksChristoph Hellwig
Drop the resp argument as it can trivially be derived from the rqstp argument. With that all functions now have the same prototype, and we can remove the unsafe casting to kxdrproc_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-05-15sunrpc: properly type pc_decode callbacksChristoph Hellwig
Drop the argp argument as it can trivially be derived from the rqstp argument. With that all functions now have the same prototype, and we can remove the unsafe casting to kxdrproc_t. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15sunrpc: properly type pc_release callbacksChristoph Hellwig
Drop the p and resp arguments as they are always NULL or can trivially be derived from the rqstp argument. With that all functions now have the same prototype, and we can remove the unsafe casting to kxdrproc_t. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-25nfsd: check for oversized NFSv2/v3 argumentsJ. Bruce Fields
A client can append random data to the end of an NFSv2 or NFSv3 RPC call without our complaining; we'll just stop parsing at the end of the expected data and ignore the rest. Encoded arguments and replies are stored together in an array of pages, and if a call is too large it could leave inadequate space for the reply. This is normally OK because NFS RPC's typically have either short arguments and long replies (like READ) or long arguments and short replies (like WRITE). But a client that sends an incorrectly long reply can violate those assumptions. This was observed to cause crashes. So, insist that the argument not be any longer than we expect. Also, several operations increment rq_next_page in the decode routine before checking the argument size, which can leave rq_next_page pointing well past the end of the page array, causing trouble later in svc_free_pages. As followup we may also want to rewrite the encoding routines to check more carefully that they aren't running off the end of the page array. Reported-by: Tuomas Haanpää <thaan@synopsys.com> Reported-by: Ari Kauppi <ari@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-04-25nfsd: stricter decoding of write-like NFSv2/v3 opsJ. Bruce Fields
The NFSv2/v3 code does not systematically check whether we decode past the end of the buffer. This generally appears to be harmless, but there are a few places where we do arithmetic on the pointers involved and don't account for the possibility that a length could be negative. Add checks to catch these. Reported-by: Tuomas Haanpää <thaan@synopsys.com> Reported-by: Ari Kauppi <ari@synopsys.com> Reviewed-by: NeilBrown <neilb@suse.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-04-25nfsd4: minor NFSv2/v3 write decoding cleanupJ. Bruce Fields
Use a couple shortcuts that will simplify a following bugfix. Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-05-24Merge tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "A very quiet cycle for nfsd, mainly just an RDMA update from Chuck Lever" * tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux: sunrpc: fix stripping of padded MIC tokens svcrpc: autoload rdma module svcrdma: Generalize svc_rdma_xdr_decode_req() svcrdma: Eliminate code duplication in svc_rdma_recvfrom() svcrdma: Drain QP before freeing svcrdma_xprt svcrdma: Post Receives only for forward channel requests svcrdma: Remove superfluous line from rdma_read_chunks() svcrdma: svc_rdma_put_context() is invoked twice in Send error path svcrdma: Do not add XDR padding to xdr_buf page vector svcrdma: Support IPv6 with NFS/RDMA nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid Remove unnecessary allocation
2016-05-13svcrdma: Do not add XDR padding to xdr_buf page vectorChuck Lever
An xdr_buf has a head, a vector of pages, and a tail. Each RPC request is presented to the NFS server contained in an xdr_buf. The RDMA transport would like to supply the NFS server with only the NFS WRITE payload bytes in the page vector. In some common cases, that would allow the NFS server to swap those pages right into the target file's page cache. Have the transport's RDMA Read logic put XDR pad bytes in the tail iovec, and not in the pages that hold the data payload. The NFSv3 WRITE XDR decoder is finicky about the lengths involved, so make sure it is looking in the correct places when computing the total length of the incoming NFS WRITE request. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-04-10don't bother with ->d_inode->i_sb - it's always equal to ->d_sbAl Viro
... and neither can ever be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-09nfsd: don't hold i_mutex over userspace upcallsNeilBrown
We need information about exports when crossing mountpoints during lookup or NFSv4 readdir. If we don't already have that information cached, we may have to ask (and wait for) rpc.mountd. In both cases we currently hold the i_mutex on the parent of the directory we're asking rpc.mountd about. We've seen situations where rpc.mountd performs some operation on that directory that tries to take the i_mutex again, resulting in deadlock. With some care, we may be able to avoid that in rpc.mountd. But it seems better just to avoid holding a mutex while waiting on userspace. It appears that lookup_one_len is pretty much the only operation that needs the i_mutex. So we could just drop the i_mutex elsewhere and do something like mutex_lock() lookup_one_len() mutex_unlock() In many cases though the lookup would have been cached and not required the i_mutex, so it's more efficient to create a lookup_one_len() variant that only takes the i_mutex when necessary. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-10-12nfsd: switch unsigned char flags in svc_fh to boolsJeff Layton
...just for clarity. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-05-07nfsd: stop READDIRPLUS returning inconsistent attributesNeilBrown
The NFSv3 READDIRPLUS gets some of the returned attributes from the readdir, and some from an inode returned from a new lookup. The two objects could be different thanks to intervening renames. The attributes in READDIRPLUS are optional, so let's just skip them if we notice this case. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-23NFSD: Using min/max/min_t/max_t for calculateKinglong Mee
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-22nfsd: Remove assignments inside conditionsBenoit Taine
Assignments should not happen inside an if conditional, but in the line before. This issue was reported by checkpatch. The semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i1; expression e1; statement S; @@ -if(!(i1 = e1)) S +i1 = e1; +if(!i1) +S // </smpl> It has been tested by compilation. Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-01-23nfsd: fix encode_entryplus_baggage stack usageJ. Bruce Fields
We stick an extra svc_fh in nfsd3_readdirres to save the need to kmalloc, though maybe it would be fine to kmalloc instead. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-12-10nfsd: don't return high mode bitsAlbert Fluegel
The Linux NFS server replies among other things to a "Check access permission" the following: NFS: File type = 2 (Directory) NFS: Mode = 040755 A netapp server replies here: NFS: File type = 2 (Directory) NFS: Mode = 0755 The RFC 1813 i read: fattr3 struct fattr3 { ftype3 type; mode3 mode; uint32 nlink; ... For the mode bits only the lowest 9 are defined in the RFC As far as I can tell, knfsd has always done this, so apparently it's harmless. Nevertheless, it appears to be wrong. Note this is already correct in the NFSv4 case, only v2 and v3 need fixing. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26switch vfs_getattr() to struct pathAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-13nfsd: Convert nfs3xdr to use kuids and kgidsEric W. Biederman
When reading uids and gids off the wire convert them to kuids and kgids. When putting kuids and kgids onto the wire first convert them to uids and gids the other side will understand. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13nfsd: Remove nfsd_luid, nfsd_lgid, nfsd_ruid and nfsd_rgidEric W. Biederman
These trivial macros that don't currently do anything are the last vestiages of an old attempt at uid mapping that was removed from the kernel in September of 2002. Remove them to make it clear what the code is currently doing. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-17nfsd4: cleanup: replace rq_resused count by rq_next_page pointerJ. Bruce Fields
It may be a matter of personal taste, but I find this makes the code clearer. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-10nfsd: make NFSd service boot time per-netStanislav Kinsbursky
This is simple: an NFSd service can be started at different times in different network environments. So, its "boot time" has to be assigned per net. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-04-13nfsd: fix compose_entry_fh() failure exitsAl Viro
Restore the original logics ("fail on mountpoints, negatives and in case of fh_compose() failures"). Since commit 8177e (nfsd: clean up readdirplus encoding) that got broken - rv = fh_compose(fhp, exp, dchild, &cd->fh); if (rv) goto out; if (!dchild->d_inode) goto out; rv = 0; out: is equivalent to rv = fh_compose(fhp, exp, dchild, &cd->fh); out: and the second check has no effect whatsoever... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-29Merge branch 'for-2.6.40' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd: make local functions static NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session() NFSD: Check status from nfsd4_map_bcts_dir() NFSD: Remove setting unused variable in nfsd_vfs_read() nfsd41: error out on repeated RECLAIM_COMPLETE nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence nfsd v4.1 lOCKT clientid field must be ignored nfsd41: add flag checking for create_session nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly nfsd4: fix wrongsec handling for PUTFH + op cases nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller nfsd4: introduce OPDESC helper nfsd4: allow fh_verify caller to skip pseudoflavor checks nfsd: distinguish functions of NFSD_MAY_* flags svcrpc: complete svsk processing on cb receive failure svcrpc: take advantage of tcp autotuning SUNRPC: Don't wait for full record to receive tcp data svcrpc: copy cb reply instead of pages svcrpc: close connection if client sends short packet svcrpc: note network-order types in svc_process_calldir ...
2011-05-18nfsd: make local functions staticDaniel Mack
This also fixes a number of sparse warnings. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-08nfsd: Fix possible BUG_ON firing in set_change_infoNeil Brown
If vfs_getattr in fill_post_wcc returns an error, we don't set fh_post_change. For NFSv4, this can result in set_change_info triggering a BUG_ON. i.e. fh_post_saved being zero isn't really a bug. So: - instead of BUGging when fh_post_saved is zero, just clear ->atomic. - if vfs_getattr fails in fill_post_wcc, take a copy of i_ctime anyway. This will be used i seg_change_info, but not overly trusted. - While we are there, remove the pointless 'if' statements in set_change_info. There is no harm setting all the values. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2009-12-15nfsd: remove pointless paths in file headersJ. Bruce Fields
The new .h files have paths at the top that are now out of date. While we're here, just remove all of those from fs/nfsd; they never served any purpose. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-12-14nfsd: Move private headers to source directoryBoaz Harrosh
Lots of include/linux/nfsd/* headers are only used by nfsd module. Move them to the source directory Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-12-14nfsd: Source files #include cleanupsBoaz Harrosh
Now that the headers are fixed and carry their own wait, all fs/nfsd/ source files can include a minimal set of headers. and still compile just fine. This patch should improve the compilation speed of the nfsd module. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>