summaryrefslogtreecommitdiff
path: root/fs/nfsd/vfs.h
AgeCommit message (Collapse)Author
2019-11-30nfsd: Ensure CLONE persists data and metadata changes to the target fileTrond Myklebust
The NFSv4.2 CLONE operation has implicit persistence requirements on the target file, since there is no protocol requirement that the client issue a separate operation to persist data. For that reason, we should call vfs_fsync_range() on the destination file after a successful call to vfs_clone_file_range(). Fixes: ffa0160a1039 ("nfsd: implement the NFSv4.2 CLONE operation") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-23nfsd: fix nfs read eof detectionTrond Myklebust
Currently, the knfsd server assumes that a short read indicates an end of file. That assumption is incorrect. The short read means that either we've hit the end of file, or we've hit a read error. In the case of a read error, the client may want to retry (as per the implementation recommendations in RFC1813 and RFC7530), but currently it is being told that it hit an eof. Move the code to detect eof from version specific code into the generic nfsd read. Report eof only in the two following cases: 1) read() returns a zero length short read with no error. 2) the offset+length of the read is >= the file size. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: rip out the raparms cacheJeff Layton
The raparms cache was set up in order to ensure that we carry readahead information forward from one RPC call to the next. In other words, it was set up because each RPC call was forced to open a struct file, then close it, causing the loss of readahead information that is normally cached in that struct file, and used to keep the page cache filled when a user calls read() multiple times on the same file descriptor. Now that we cache the struct file, and reuse it for all the I/O calls to a given file by a given user, we no longer have to keep a separate readahead cache. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: add a new struct file caching facility to nfsdJeff Layton
Currently, NFSv2/3 reads and writes have to open a file, do the read or write and then close it again for each RPC. This is highly inefficient, especially when the underlying filesystem has a relatively slow open routine. This patch adds a new open file cache to knfsd. Rather than doing an open for each RPC, the read/write handlers can call into this cache to see if there is one already there for the correct filehandle and NFS_MAY_READ/WRITE flags. If there isn't an entry, then we create a new one and attempt to perform the open. If there is, then we wait until the entry is fully instantiated and return it if it is at the end of the wait. If it's not, then we attempt to take over construction. Since the main goal is to speed up NFSv2/3 I/O, we don't want to close these files on last put of these objects. We need to keep them around for a little while since we never know when the next READ/WRITE will come in. Cache entries have a hardcoded 1s timeout, and we have a recurring workqueue job that walks the cache and purges any entries that have expired. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-24nfsd: allow fh_want_write to be called twiceJ. Bruce Fields
A fuzzer recently triggered lockdep warnings about potential sb_writers deadlocks caused by fh_want_write(). Looks like we aren't careful to pair each fh_want_write() with an fh_drop_write(). It's not normally a problem since fh_put() will call fh_drop_write() for us. And was OK for NFSv3 where we'd do one operation that might call fh_want_write(), and then put the filehandle. But an NFSv4 protocol fuzzer can do weird things like call unlink twice in a compound, and then we get into trouble. I'm a little worried about this approach of just leaving everything to fh_put(). But I think there are probably a lot of fh_want_write()/fh_drop_write() imbalances so for now I think we need it to be more forgiving. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03nfsd: Add I/O trace points in the NFSv4 read procChuck Lever
NFSv4 read compound processing invokes nfsd_splice_read and nfs_readv directly, so the trace points currently in nfsd_read are not invoked for NFSv4 reads. Move the NFSD READ trace points to common helpers so that NFSv4 reads are captured. Also, record any local I/O error that occurs, the total count of bytes that were actually returned, and whether splice or vectored read was used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02statx: Add a system call to make enhanced file info availableDavid Howells
Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31NFSD: cleanup dead codes and values in nfsd_writeKinglong Mee
This is just cleanup, no change in functionality. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-31NFSD: pass an integer for stable type to nfsd_vfs_writeKinglong Mee
After fae5096ad217 "nfsd: assume writeable exportabled filesystems have f_sync" we no longer modify this argument. This is just cleanup, no change in functionality. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-10-07NFSD: Implement the COPY callAnna Schumaker
I only implemented the sync version of this call, since it's the easiest. I can simply call vfs_copy_range() and have the vfs do the right thing for the filesystem being exported. Signed-off-by: Anna Schumaker <bjschuma@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-08-04nfsd: reorganize nfsd_createJ. Bruce Fields
There's some odd logic in nfsd_create() that allows it to be called with the parent directory either locked or unlocked. The only already-locked caller is NFSv2's nfsd_proc_create(). It's less confusing to split out the unlocked case into a separate function which the NFSv2 code can call directly. Also fix some comments while we're here. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-23nfsd: use short read as well as i_size to set eofBenjamin Coddington
Use the result of a local read to determine when to set the eof flag. This allows us to return the location of the end of the file atomically at the time of the read. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> [bfields: add some documentation] Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-12-07nfsd: implement the NFSv4.2 CLONE operationChristoph Hellwig
This is basically a remote version of the btrfs CLONE operation, so the implementation is fairly trivial. Made even more trivial by stealing the XDR code and general framework Anna Schumaker's COPY prototype. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-10-12nfsd: switch unsigned char flags in svc_fh to boolsJeff Layton
...just for clarity. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-08-31NFSD: Set the attributes used to store the verifier for EXCLUSIVE4_1Kinglong Mee
According to rfc5661 18.16.4, "If EXCLUSIVE4_1 was used, the client determines the attributes used for the verifier by comparing attrset with cva_attrs.attrmask;" So, EXCLUSIVE4_1 also needs those bitmask used to store the verifier. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-22nfsd: take struct file setup fully into nfs4_preprocess_stateid_opChristoph Hellwig
This patch changes nfs4_preprocess_stateid_op so it always returns a valid struct file if it has been asked for that. For that we now allocate a temporary struct file for special stateids, and check permissions if we got the file structure from the stateid. This ensures that all callers will get their handling of special stateids right, and avoids code duplication. There is a little wart in here because the read code needs to know if we allocated a file structure so that it can copy around the read-ahead parameters. In the long run we should probably aim to cache full file structures used with special stateids instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-06-19nfsd: clean up raparams handlingChristoph Hellwig
Refactor the raparam hash helpers to just deal with the raparms, and keep opening/closing files separate from that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-05-04nfsd: remove nfsd_closeChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-16Merge branch 'for-3.19' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "A comparatively quieter cycle for nfsd this time, but still with two larger changes: - RPC server scalability improvements from Jeff Layton (using RCU instead of a spinlock to find idle threads). - server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna Schumaker, enabling fallocate on new clients" * 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits) nfsd4: fix xdr4 count of server in fs_location4 nfsd4: fix xdr4 inclusion of escaped char sunrpc/cache: convert to use string_escape_str() sunrpc: only call test_bit once in svc_xprt_received fs: nfsd: Fix signedness bug in compare_blob sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt sunrpc: convert to lockless lookup of queued server threads sunrpc: fix potential races in pool_stats collection sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it sunrpc: require svc_create callers to pass in meaningful shutdown routine sunrpc: have svc_wake_up only deal with pool 0 sunrpc: convert sp_task_pending flag to use atomic bitops sunrpc: move rq_cachetype field to better optimize space sunrpc: move rq_splice_ok flag into rq_flags sunrpc: move rq_dropme flag into rq_flags sunrpc: move rq_usedeferral flag to rq_flags sunrpc: move rq_local field to rq_flags sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it nfsd: minor off by one checks in __write_versions() sunrpc: release svc_pool_map reference when serv allocation fails ...
2014-11-07nfsd: Add ALLOCATE supportAnna Schumaker
The ALLOCATE operation is used to preallocate space in a file. I can do this by using vfs_fallocate() to do the actual preallocation. ALLOCATE only returns a status indicator, so we don't need to write a special encode() function. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-10-31vfs: make first argument of dir_context.actor typedMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-07-08NFSD: Remove iattr parameter from nfsd_symlink()Kinglong Mee
Commit db2e747b1499 (vfs: remove mode parameter from vfs_symlink()) have remove mode parameter from vfs_symlink. So that, iattr isn't needed by nfsd_symlink now, just remove it. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-07-08nfsd: let nfsd_symlink assume null-terminated dataJ. Bruce Fields
Currently nfsd_symlink has a weird hack to serve callers who don't null-terminate symlink data: it looks ahead at the next byte to see if it's zero, and copies it to a new buffer to null-terminate if not. That means callers don't have to null-terminate, but they *do* have to ensure that the byte following the end of the data is theirs to read. That's a bit subtle, and the NFSv4 code actually got this wrong. So let's just throw out that code and let callers pass null-terminated strings; we've already fixed them to do that. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-06-23nfsd: nfsd_splice_read and nfsd_readv should return __be32Jeff Layton
The callers expect a __be32 return and the functions they call return __be32, so having these return int is just wrong. Also, nfsd_finish_read can be made static. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30nfsd: remove unused function nfsd_read_fileChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30nfsd4: separate splice and readv casesJ. Bruce Fields
The splice and readv cases are actually quite different--for example the former case ignores the array of vectors we build up for the latter. It is probably clearer to separate the two cases entirely. There's some code duplication between the split out encoders, but this is only temporary and will be fixed by a later patch. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-01-30Merge branch 'for-3.14' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: - Handle some loose ends from the vfs read delegation support. (For example nfsd can stop breaking leases on its own in a fewer places where it can now depend on the vfs to.) - Make life a little easier for NFSv4-only configurations (thanks to Kinglong Mee). - Fix some gss-proxy problems (thanks Jeff Layton). - miscellaneous bug fixes and cleanup * 'for-3.14' of git://linux-nfs.org/~bfields/linux: (38 commits) nfsd: consider CLAIM_FH when handing out delegation nfsd4: fix delegation-unlink/rename race nfsd4: delay setting current_fh in open nfsd4: minor nfs4_setlease cleanup gss_krb5: use lcm from kernel lib nfsd4: decrease nfsd4_encode_fattr stack usage nfsd: fix encode_entryplus_baggage stack usage nfsd4: simplify xdr encoding of nfsv4 names nfsd4: encode_rdattr_error cleanup nfsd4: nfsd4_encode_fattr cleanup minor svcauth_gss.c cleanup nfsd4: better VERIFY comment nfsd4: break only delegations when appropriate NFSD: Fix a memory leak in nfsd4_create_session sunrpc: get rid of use_gssp_lock sunrpc: fix potential race between setting use_gss_proxy and the upcall rpc_clnt sunrpc: don't wait for write before allowing reads from use-gss-proxy file nfsd: get rid of unused function definition Define op_iattr for nfsd4_open instead using macro NFSD: fix compile warning without CONFIG_NFSD_V3 ...
2014-01-26nfsd: use get_acl and ->set_aclChristoph Hellwig
Remove the boilerplate code to marshall and unmarhall ACL objects into xattrs and operate on the posix_acl objects directly. Also move all the ACL handling code into nfs?acl.c where it belongs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-06nfsd: get rid of unused function definitionKinglong Mee
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-05-15NFSD: Server implementation of MAC LabelingDavid Quigley
Implement labeled NFS on the server: encoding and decoding, and writing and reading, of file labels. Enabled with CONFIG_NFSD_V4_SECURITY_LABEL. Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com> Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg> Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg> Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-05-13nfsd: get rid of the unused functions in vfsZhao Hongjiang
The fh_lock_parent(), nfsd_truncate(), nfsd_notify_change() and nfsd_sync_dir() fuctions are neither implemented nor used, just remove them. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-26switch vfs_getattr() to struct pathAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31nfsd: Push mnt_want_write() outside of i_mutexJan Kara
When mnt_want_write() starts to handle freezing it will get a full lock semantics requiring proper lock ordering. So push mnt_want_write() call consistently outside of i_mutex. CC: linux-nfs@vger.kernel.org CC: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-18nfsd: vfs_llseek() with 32 or 64 bit offsets (hashes)Bernd Schubert
Use 32-bit or 64-bit llseek() hashes for directory offsets depending on the NFS version. NFSv2 gets 32-bit hashes only. NOTE: This patch got rather complex as Christoph asked to set the filp->f_mode flag in the open call or immediatly after dentry_open() in nfsd_open() to avoid races. Personally I still do not see a reason for that and in my opinion FMODE_32BITHASH/FMODE_64BITHASH flags could be set nfsd_readdir(), as it follows directly after nfsd_open() without a chance of races. Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: J. Bruce Fields<bfields@redhat.com>
2012-01-03fs: propagate umode_t, misc bitsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03new helpers: fh_{want,drop}_write()Al Viro
A bunch of places in nfsd does mnt_{want,drop}_write on vfsmount of export of given fhandle. Switched to obvious inlined helpers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-10-17nfsd4: warn on open failure after createJ. Bruce Fields
If we create the object and then return failure to the client, we're left with an unexpected file in the filesystem. I'm trying to eliminate such cases but not 100% sure I have so an assertion might be helpful for now. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-27nfsd: prettify NFSD_MAY_* flag definitionsJ. Bruce Fields
Acked-by: Jim Rees <rees@umich.edu> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-08-27nfsd4: permit read opens of executable-only filesJ. Bruce Fields
A client that wants to execute a file must be able to read it. Read opens over nfs are therefore implicitly allowed for executable files even when those files are not readable. NFSv2/v3 get this right by using a passed-in NFSD_MAY_OWNER_OVERRIDE on read requests, but NFSv4 has gotten this wrong ever since dc730e173785e29b297aa605786c94adaffe2544 "nfsd4: fix owner-override on open", when we realized that the file owner shouldn't override permissions on non-reclaim NFSv4 opens. So we can't use NFSD_MAY_OWNER_OVERRIDE to tell nfsd_permission to allow reads of executable files. So, do the same thing we do whenever we encounter another weird NFS permission nit: define yet another NFSD_MAY_* flag. The industry's future standardization on 128-bit processors will be motivated primarily by the need for integers with enough bits for all the NFSD_MAY_* flags. Reported-by: Leonardo Borda <leonardoborda@gmail.com> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctlyMi Jinlong
The NFS server uses nfsd_create_v3 to handle EXCLUSIVE4_1 opens, but that function is not prepared to handle them. Rename nfsd_create_v3() to do_nfsd_create(), and add handling of EXCLUSIVE4_1. Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-11nfsd4: allow fh_verify caller to skip pseudoflavor checksJ. Bruce Fields
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-11nfsd: distinguish functions of NFSD_MAY_* flagsJ. Bruce Fields
Most of the NFSD_MAY_* flags actually request permissions, but over the years we've accreted a few that modify the behavior of the permission or open code in other ways. Distinguish the two cases a little more. In particular, allow the shortcut at the start of nfsd_permission to ignore the non-permission-requesting bits. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-07-30nfsd: minor nfsd read api cleanupJ. Bruce Fields
Christoph points that the NFSv2/v3 callers know which case they want here, so we may as well just call the file=NULL case directly instead of making this conditional. Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-03-22nfsd: don't break lease while servicing a COMMITJeff Layton
This is the second attempt to fix the problem whereby a COMMIT call causes a lease break and triggers a possible deadlock. The problem is that nfsd attempts to break a lease on a COMMIT call. This triggers a delegation recall if the lease is held for a delegation. If the client is the one holding the delegation and it's the same one on which it's issuing the COMMIT, then it can't return that delegation until the COMMIT is complete. But, nfsd won't complete the COMMIT until the delegation is returned. The client and server are essentially deadlocked until the state is marked bad (due to the client not responding on the callback channel). The first patch attempted to deal with this by eliminating the open of the file altogether and simply had nfsd_commit pass a NULL file pointer to the vfs_fsync_range. That would conflict with some work in progress by Christoph Hellwig to clean up the fsync interface, so this patch takes a different approach. This declares a new NFSD_MAY_NOT_BREAK_LEASE access flag that indicates to nfsd_open that it should not break any leases when opening the file, and has nfsd_commit set that flag on the nfsd_open call. For now, this patch leaves nfsd_commit opening the file with write access since I'm not clear on what sort of access would be more appropriate. Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-12-15nfsd: move most of nfsfh.h to fs/nfsdJ. Bruce Fields
Most of this can be trivially moved to a private header as well. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-12-15nfsd: filter readdir results in V4ROOT caseJ. Bruce Fields
As with lookup, we treat every boject as a mountpoint and pretend it doesn't exist if it isn't exported. The preexisting code here is confusing, but I haven't yet figured out how to make it clearer. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-11-13nfsd: make fs/nfsd/vfs.h for common includesJ. Bruce Fields
None of this stuff is used outside nfsd, so move it out of the common linux include directory. Actually, probably none of the stuff in include/linux/nfsd/nfsd.h really belongs there, so later we may remove that file entirely. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>