summaryrefslogtreecommitdiff
path: root/fs/nfsd
AgeCommit message (Collapse)Author
2019-09-27Merge tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "Highlights: - Add a new knfsd file cache, so that we don't have to open and close on each (NFSv2/v3) READ or WRITE. This can speed up read and write in some cases. It also replaces our readahead cache. - Prevent silent data loss on write errors, by treating write errors like server reboots for the purposes of write caching, thus forcing clients to resend their writes. - Tweak the code that allocates sessions to be more forgiving, so that NFSv4.1 mounts are less likely to hang when a server already has a lot of clients. - Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be limited only by the backend filesystem and the maximum RPC size. - Allow the server to enforce use of the correct kerberos credentials when a client reclaims state after a reboot. And some miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits) sunrpc: clean up indentation issue nfsd: fix nfs read eof detection nfsd: Make nfsd_reset_boot_verifier_locked static nfsd: degraded slot-count more gracefully as allocation nears exhaustion. nfsd: handle drc over-allocation gracefully. nfsd: add support for upcall version 2 nfsd: add a "GetVersion" upcall for nfsdcld nfsd: Reset the boot verifier on all write I/O errors nfsd: Don't garbage collect files that might contain write errors nfsd: Support the server resetting the boot verifier nfsd: nfsd_file cache entries should be per net namespace nfsd: eliminate an unnecessary acl size limit Deprecate nfsd fault injection nfsd: remove duplicated include from filecache.c nfsd: Fix the documentation for svcxdr_tmpalloc() nfsd: Fix up some unused variable warnings nfsd: close cached files prior to a REMOVE or RENAME that would replace target nfsd: rip out the raparms cache nfsd: have nfsd_test_lock use the nfsd_file cache nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache ...
2019-09-23nfsd: fix nfs read eof detectionTrond Myklebust
Currently, the knfsd server assumes that a short read indicates an end of file. That assumption is incorrect. The short read means that either we've hit the end of file, or we've hit a read error. In the case of a read error, the client may want to retry (as per the implementation recommendations in RFC1813 and RFC7530), but currently it is being told that it hit an eof. Move the code to detect eof from version specific code into the generic nfsd read. Report eof only in the two following cases: 1) read() returns a zero length short read with no error. 2) the offset+length of the read is >= the file size. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-23nfsd: Make nfsd_reset_boot_verifier_locked staticYueHaibing
Fix sparse warning: fs/nfsd/nfssvc.c:364:6: warning: symbol 'nfsd_reset_boot_verifier_locked' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-20nfsd: degraded slot-count more gracefully as allocation nears exhaustion.NeilBrown
This original code in nfsd4_get_drc_mem() would hand out 30 slots (approximately NFSD_MAX_MEM_PER_SESSION bytes at slightly over 2K per slot) to each requesting client until it ran out of space, then it would possibly give one last client a reduced allocation, then fail the allocation. Since commit de766e570413 ("nfsd: give out fewer session slots as limit approaches") the last 90 slots to be given to about 12 clients with quickly reducing slot counts (better than just 3 clients). This still seems unnecessarily hasty. A subsequent patch allows over-allocation so every client gets at least one slot, but that might be a bit restrictive. The requested number of nfsd threads is the best guide we have to the expected number of clients, so use that - if it is at least 8. 256 threads on a 256Meg machine - which is a lot for a tiny machine - would result in nfsd_drc_max_mem being 2Meg, so 8K (3 slots) would be available for the first client, and over 200 clients would get more than 1 slot. So I don't think this change will be too debilitating on poorly configured machines, though it does mean that a sensible configuration is a little more important. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-20nfsd: handle drc over-allocation gracefully.NeilBrown
Currently, if there are more clients than allowed for by the space allocation in set_max_drc(), we fail a SESSION_CREATE request with NFS4ERR_DELAY. This means that the client retries indefinitely, which isn't a user-friendly response. The RFC requires NFS4ERR_NOSPC, but that would at best result in a clean failure on the client, which is not much more friendly. The current space allocation is a best-guess and doesn't provide any guarantees, we could still run out of space when trying to allocate drc space. So fail more gracefully - always give out at least one slot. If all clients used all the space in all slots, we might start getting memory pressure, but that is possible anyway. So ensure 'num' is always at least 1, and remove the test for it being zero. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-18Merge branch 'work.mount-base' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount API infrastructure updates from Al Viro: "Infrastructure bits of mount API conversions. The rest is more of per-filesystem updates and that will happen in separate pull requests" * 'work.mount-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mtd: Provide fs_context-aware mount_mtd() replacement vfs: Create fs_context-aware mount_bdev() replacement new helper: get_tree_keyed() vfs: set fs_context::user_ns for reconfigure
2019-09-10nfsd: add support for upcall version 2Scott Mayhew
Version 2 upcalls will allow the nfsd to include a hash of the kerberos principal string in the Cld_Create upcall. If a principal is present in the svc_cred, then the hash will be included in the Cld_Create upcall. We attempt to use the svc_cred.cr_raw_principal (which is returned by gssproxy) first, and then fall back to using the svc_cred.cr_principal (which is returned by both gssproxy and rpc.svcgssd). Upon a subsequent restart, the hash will be returned in the Cld_Gracestart downcall and stored in the reclaim_str_hashtbl so it can be used when handling reclaim opens. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: add a "GetVersion" upcall for nfsdcldScott Mayhew
Add a "GetVersion" upcall to allow nfsd to determine the maximum upcall version that the nfsdcld userspace daemon supports. If the daemon responds with -EOPNOTSUPP, then we know it only supports v1. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: Reset the boot verifier on all write I/O errorsTrond Myklebust
If multiple clients are writing to the same file, then due to the fact we share a single file descriptor between all NFSv3 clients writing to the file, we have a situation where clients can miss the fact that their file data was not persisted. While this should be rare, it could cause silent data loss in situations where multiple clients are using NLM locking or O_DIRECT to write to the same file. Unfortunately, the stateless nature of NFSv3 and the fact that we can only identify clients by their IP address means that we cannot trivially cache errors; we would not know when it is safe to release them from the cache. So the solution is to declare a reboot. We understand that this should be a rare occurrence, since disks are usually stable. The most frequent occurrence is likely to be ENOSPC, at which point all writes to the given filesystem are likely to fail anyway. So the expectation is that clients will be forced to retry their writes until they hit the fatal error. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: Don't garbage collect files that might contain write errorsTrond Myklebust
If a file may contain unstable writes that can error out, then we want to avoid garbage collecting the struct nfsd_file that may be tracking those errors. So in the garbage collector, we try to avoid collecting files that aren't clean. Furthermore, we avoid immediately kicking off the garbage collector in the case where the reference drops to zero for the case where there is a write error that is being tracked. If the file is unhashed while an error is pending, then declare a reboot, to ensure the client resends any unstable writes. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: Support the server resetting the boot verifierTrond Myklebust
Add support to allow the server to reset the boot verifier in order to force clients to resend I/O after a timeout failure. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-10nfsd: nfsd_file cache entries should be per net namespaceTrond Myklebust
Ensure that we can safely clear out the file cache entries when the nfs server is shut down on a container. Otherwise, the file cache may end up pinning the mounts. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-05new helper: get_tree_keyed()Al Viro
For vfs_get_keyed_super users. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-08-28nfsd: eliminate an unnecessary acl size limitJ. Bruce Fields
We're unnecessarily limiting the size of an ACL to less than what most filesystems will support. Some users do hit the limit and it's confusing and unnecessary. It still seems prudent to impose some limit on the number of ACEs the client gives us before passing it straight to kmalloc(). So, let's just limit it to the maximum number that would be possible given the amount of data left in the argument buffer. That will still leave one limit beyond whatever the filesystem imposes: the client and server negotiate a limit on the size of a request, which we have to respect. But we're no longer imposing any additional arbitrary limit. struct nfs4_ace is 20 bytes on my system and the maximum call size we'll negotiate is about a megabyte, so in practice this is limiting the allocation here to about a megabyte. Reported-by: "de Vandiere, Louis" <louis.devandiere@atos.net> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-26Deprecate nfsd fault injectionJ. Bruce Fields
This is only useful for client testing. I haven't really maintained it, and reference counting and locking are wrong at this point. You can get some of the same functionality now from nfsd/clients/. It was a good idea but I think its time has passed. In the unlikely event of users, hopefully the BROKEN dependency will prompt them to speak up. Otherwise I expect to remove it soon. Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-20nfsd: remove duplicated include from filecache.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: Fix the documentation for svcxdr_tmpalloc()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: Fix up some unused variable warningsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: close cached files prior to a REMOVE or RENAME that would replace targetJeff Layton
It's not uncommon for some workloads to do a bunch of I/O to a file and delete it just afterward. If knfsd has a cached open file however, then the file may still be open when the dentry is unlinked. If the underlying filesystem is nfs, then that could trigger it to do a sillyrename. On a REMOVE or RENAME scan the nfsd_file cache for open files that correspond to the inode, and proactively unhash and put their references. This should prevent any delete-on-last-close activity from occurring, solely due to knfsd's open file cache. This must be done synchronously though so we use the variants that call flush_delayed_fput. There are deadlock possibilities if you call flush_delayed_fput while holding locks, however. In the case of nfsd_rename, we don't even do the lookups of the dentries to be renamed until we've locked for rename. Once we've figured out what the target dentry is for a rename, check to see whether there are cached open files associated with it. If there are, then unwind all of the locking, close them all, and then reattempt the rename. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: rip out the raparms cacheJeff Layton
The raparms cache was set up in order to ensure that we carry readahead information forward from one RPC call to the next. In other words, it was set up because each RPC call was forced to open a struct file, then close it, causing the loss of readahead information that is normally cached in that struct file, and used to keep the page cache filled when a user calls read() multiple times on the same file descriptor. Now that we cache the struct file, and reuse it for all the I/O calls to a given file by a given user, we no longer have to keep a separate readahead cache. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: have nfsd_test_lock use the nfsd_file cacheJeff Layton
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cacheJeff Layton
Have nfs4_preprocess_stateid_op pass back a nfsd_file instead of a filp. Since we now presume that the struct file will be persistent in most cases, we can stop fiddling with the raparms in the read code. This also means that we don't really care about the rd_tmp_file field anymore. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: convert fi_deleg_file and ls_file fields to nfsd_fileJeff Layton
Have them keep an nfsd_file reference instead of a struct file. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: convert nfs4_file->fi_fds array to use nfsd_filesJeff Layton
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook nfsd_commit up to the nfsd_file cacheJeff Layton
Use cached filps if possible instead of opening a new one every time. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook up nfsd_read to the nfsd_file cacheJeff Layton
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: hook up nfsd_write to the new nfsd_file cacheJeff Layton
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19nfsd: add a new struct file caching facility to nfsdJeff Layton
Currently, NFSv2/3 reads and writes have to open a file, do the read or write and then close it again for each RPC. This is highly inefficient, especially when the underlying filesystem has a relatively slow open routine. This patch adds a new open file cache to knfsd. Rather than doing an open for each RPC, the read/write handlers can call into this cache to see if there is one already there for the correct filehandle and NFS_MAY_READ/WRITE flags. If there isn't an entry, then we create a new one and attempt to perform the open. If there is, then we wait until the entry is fully instantiated and return it if it is at the end of the wait. If it's not, then we attempt to take over construction. Since the main goal is to speed up NFSv2/3 I/O, we don't want to close these files on last put of these objects. We need to keep them around for a little while since we never know when the next READ/WRITE will come in. Cache entries have a hardcoded 1s timeout, and we have a recurring workqueue job that walks the cache and purges any entries that have expired. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-16nfsd: Remove unnecessary NULL checksJ. Bruce Fields
"cb" is never actually NULL in these functions. On a quick skim of the history, they seem to have been there from the beginning. I'm not sure if they originally served a purpose. Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-16nfsd4: Fix kernel crash when reading proc file reply_cache_statsHe Zhe
reply_cache_stats uses wrong parameter as seq file private structure and thus causes the following kernel crash when users read /proc/fs/nfsd/reply_cache_stats BUG: kernel NULL pointer dereference, address: 00000000000001f9 PGD 0 P4D 0 Oops: 0000 [#3] SMP PTI CPU: 6 PID: 1502 Comm: cat Tainted: G D 5.3.0-rc3+ #1 Hardware name: Intel Corporation Broadwell Client platform/Basking Ridge, BIOS BDW-E2R1.86C.0118.R01.1503110618 03/11/2015 RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0 Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00 RSP: 0018:ffffaa520106fe08 EFLAGS: 00010246 RAX: 000000cfe1a77123 RBX: 0000000000000000 RCX: 0000000000291b46 RDX: 000000cf00000000 RSI: 0000000000000006 RDI: 0000000000291b28 RBP: ffffaa520106fe20 R08: 0000000000000006 R09: 000000cfe17e55dd R10: ffffa424e47c0000 R11: 000000000000030b R12: 0000000000000001 R13: ffffa424e5697000 R14: 0000000000000001 R15: ffffa424e5697000 FS: 00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0 Call Trace: seq_read+0x194/0x3e0 __vfs_read+0x1b/0x40 vfs_read+0x95/0x140 ksys_read+0x61/0xe0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x4d/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f805728b861 Code: fe ff ff 50 48 8d 3d 86 b4 09 00 e8 79 e0 01 00 66 0f 1f 84 00 00 00 00 00 48 8d 05 d9 19 0d 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 c3 66 0f 1f 44 00 00 48 83 ec 28 48 89 54 RSP: 002b:00007ffea1ce3c38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f805728b861 RDX: 0000000000020000 RSI: 00007f8057183000 RDI: 0000000000000003 RBP: 00007f8057183000 R08: 00007f8057182010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 0000559a60e8ff10 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Modules linked in: CR2: 00000000000001f9 ---[ end trace 01613595153f0cba ]--- RIP: 0010:nfsd_reply_cache_stats_show+0x3b/0x2d0 Code: 41 54 49 89 f4 48 89 fe 48 c7 c7 b3 10 33 88 53 bb e8 03 00 00 e8 88 82 d1 ff bf 58 89 41 00 e8 eb c5 85 00 48 83 eb 01 75 f0 <41> 8b 94 24 f8 01 00 00 48 c7 c6 be 10 33 88 4c 89 ef bb e8 03 00 RSP: 0018:ffffaa52004b3e08 EFLAGS: 00010246 RAX: 0000002bab45a7c6 RBX: 0000000000000000 RCX: 0000000000291b4c RDX: 0000002b00000000 RSI: 0000000000000004 RDI: 0000000000291b28 RBP: ffffaa52004b3e20 R08: 0000000000000004 R09: 0000002bab1c8c7a R10: ffffa424e5500000 R11: 00000000000002a9 R12: 0000000000000001 R13: ffffa424e4475000 R14: 0000000000000001 R15: ffffa424e4475000 FS: 00007f805735f580(0000) GS:ffffa424f8f80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001f9 CR3: 00000000655ce005 CR4: 00000000003606e0 Killed Fixes: 3ba75830ce17 ("nfsd4: drc containerization") Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-15nfsd: initialize i_private before d_addJ. Bruce Fields
A process could race in an open and attempt to read one of these files before i_private is initialized, and get a spurious error. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-15nfsd: use i_wrlock instead of rcu for nfsdfs i_privateJ. Bruce Fields
synchronize_rcu() gets called multiple times each time a client is destroyed. If the laundromat thread has a lot of clients to destroy, the delay can be noticeable. This was causing pynfs test RENEW3 to fail. We could embed an rcu_head in each inode and do the kref_put in an rcu callback. But simplest is just to take a lock here. (I also wonder if the laundromat thread would be better replaced by a bunch of scheduled work or timers or something.) Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-15nfsd: fix dentry leak upon mkdir failure.Tetsuo Handa
syzbot is reporting that nfsd_mkdir() forgot to remove dentry created by d_alloc_name() when __nfsd_mkdir() failed (due to memory allocation fault injection) [1]. [1] https://syzkaller.appspot.com/bug?id=ce41a1f769ea4637ebffedf004a803e8405b4674 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+2c95195d5d433f6ed6cb@syzkaller.appspotmail.com> Fixes: e8a79fb14f6b76b5 ("nfsd: add nfsd/clients directory") [bfields: clean up in nfsd_mkdir instead of __nfsd_mkdir] Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-09nfsd: Make __get_nfsdfs_client() staticYueHaibing
Fix sparse warning: fs/nfsd/nfsctl.c:1221:22: warning: symbol '__get_nfsdfs_client' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-09nfsd: Make two functions staticYueHaibing
Fix sparse warnings: fs/nfsd/nfs4state.c:1908:6: warning: symbol 'drop_client' was not declared. Should it be static? fs/nfsd/nfs4state.c:2518:6: warning: symbol 'force_expire_client' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-08nfsd: Fix misuse of strlcpyJoe Perches
Probable cut&paste typo - use the correct field size. (Not currently a practical problem since these two fields have the same size, but we should fix it anyway.) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: decode implementation idJ. Bruce Fields
Decode the implementation ID and display in nfsd/clients/#/info. It may be help identify the client. It won't be used otherwise. (When this went into the protocol, I thought the implementation ID would be a slippery slope towards implementation-specific workarounds as with the http user-agent. But I guess I was wrong, the risk seems pretty low now.) Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: create xdr_netobj_dup helperJ. Bruce Fields
Move some repeated code to a common helper. No change in behavior. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: allow forced expiration of NFSv4 clientsJ. Bruce Fields
NFSv4 clients are automatically expired and all their locks removed if they don't contact the server for a certain amount of time (the lease period, 90 seconds by default). There can still be situations where that's not enough, so allow userspace to force expiry by writing "expire\n" to the new nfsd/client/#/ctl file. (The generic "ctl" name is because I expect we may want to allow other operations on clients in the future.) The write will not return until the client is expired and all of its locks and other state removed. The fault injection code also provides a way of expiring clients, but it fails if there are any in-progress RPC's referencing the client. Also, its method of selecting a client to expire is a little more primitive--it uses an IP address, which can't always uniquely specify an NFSv4 client. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: create get_nfsdfs_clp helperJ. Bruce Fields
Factor our some common code. No change in behavior. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd4: show layout stateidsJ. Bruce Fields
These are also minimal for now, I'm not sure what information would be useful. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: show lock and deleg stateidsJ. Bruce Fields
These entries are pretty minimal for now. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd4: add file to display list of client's opensJ. Bruce Fields
Add a nfsd/clients/#/opens file to list some information about all the opens held by the given client, including open modes, device numbers, inode numbers, and open owners. Open owners are totally opaque but seem to sometimes have some useful ascii strings included, so passing through printable ascii characters and escaping the rest seems useful while still being machine-readable. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: add more information to client info fileJ. Bruce Fields
Add ip address, full client-provided identifier, and minor version. There's much more that could possibly be useful but this is a start. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: copy client's address including port number to cl_addrJ. Bruce Fields
rpc_copy_addr() copies only the IP address and misses any port numbers. It seems potentially useful to keep the port number around too. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd4: add a client info fileJ. Bruce Fields
Add a new nfsd/clients/#/info file with some basic information about each NFSv4 client. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: make client/ directory names small intsJ. Bruce Fields
We want clientid's on the wire to be randomized for reasons explained in ebd7c72c63ac "nfsd: randomize SETCLIENTID reply to help distinguish servers". But I'd rather have mostly small integers for the clients/ directory. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-03nfsd: add nfsd/clients directoryJ. Bruce Fields
I plan to expose some information about nfsv4 clients here. Signed-off-by: J. Bruce Fields <bfields@redhat.com>