| Age | Commit message (Collapse) | Author |
|---|
|
Wire up the FAN_FS_ERROR event in the fanotify_mark syscall, allowing
user space to request the monitoring of FAN_FS_ERROR events.
These events are limited to filesystem marks, so check it is the
case in the syscall handler.
Link: https://lore.kernel.org/r/20211025192746.66445-29-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The error info is a record sent to users on FAN_FS_ERROR events
documenting the type of error. It also carries an error count,
documenting how many errors were observed since the last reporting.
Link: https://lore.kernel.org/r/20211025192746.66445-28-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Plumb the pieces to add a FID report to error records. Since all error
event memory must be pre-allocated, we pre-allocate the maximum file
handle size possible, such that it should always fit.
For errors that don't expose a file handle, report it with an invalid
FID. Internally we use zero-length FILEID_ROOT file handle for passing
the information (which we report as zero-length FILEID_INVALID file
handle to userspace) so we update the handle reporting code to deal with
this case correctly.
Link: https://lore.kernel.org/r/20211025192746.66445-27-krisman@collabora.com
Link: https://lore.kernel.org/r/20211025192746.66445-25-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
[Folded two patches into 2 to make series bisectable]
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
struct fanotify_error_event, at least, is preallocated and isn't able to
to handle arbitrarily large file handles. Future-proof the code by
complaining loudly if a handle larger than MAX_HANDLE_SZ is ever found.
Link: https://lore.kernel.org/r/20211025192746.66445-26-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Now that there is an event that reports FID records even for a zeroed
file handle, wrap the logic that deides whether to issue the records
into helper functions. This shouldn't have any impact on the code, but
simplifies further patches.
Link: https://lore.kernel.org/r/20211025192746.66445-24-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fanotify_error_event would duplicate this sequence of declarations that
already exist elsewhere with a slight different size. Create a helper
macro to avoid code duplication.
Link: https://lore.kernel.org/r/20211025192746.66445-23-krisman@collabora.com
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Error events (FAN_FS_ERROR) against the same file system can be merged
by simply iterating the error count. The hash is taken from the fsid,
without considering the FH. This means that only the first error object
is reported.
Link: https://lore.kernel.org/r/20211025192746.66445-22-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Once an error event is triggered, enqueue it in the notification group,
similarly to what is done for other events. FAN_FS_ERROR is not
handled specially, since the memory is now handled by a preallocated
mempool.
For now, make the event unhashed. A future patch implements merging of
this kind of event.
Link: https://lore.kernel.org/r/20211025192746.66445-21-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Pre-allocate slots for file system errors to have greater chances of
succeeding, since error events can happen in GFP_NOFS context. This
patch introduces a group-wide mempool of error events, shared by all
FAN_FS_ERROR marks in this group.
Link: https://lore.kernel.org/r/20211025192746.66445-20-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
FAN_FS_ERROR allows reporting of event type FS_ERROR to userspace, which
is a mechanism to report file system wide problems via fanotify. This
commit preallocate userspace visible bits to match the FS_ERROR event.
Link: https://lore.kernel.org/r/20211025192746.66445-19-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Like inode events, FAN_FS_ERROR will require fid mode. Therefore,
convert the verification during fanotify_mark(2) to require fid for any
non-fd event. This means fid_mode will not only be required for inode
events, but for any event that doesn't provide a descriptor.
Link: https://lore.kernel.org/r/20211025192746.66445-17-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Instead of failing, encode an invalid file handle in fanotify_encode_fh
if no inode is provided. This bogus file handle will be reported by
FAN_FS_ERROR for non-inode errors.
Link: https://lore.kernel.org/r/20211025192746.66445-16-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Allow passing a NULL hash to fanotify_encode_fh and avoid calculating
the hash if not needed.
Link: https://lore.kernel.org/r/20211025192746.66445-15-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
FAN_FS_ERROR doesn't support DFID, but this function is still called for
every event. The problem is that it is not capable of handling null
inodes, which now can happen in case of superblock error events. For
this case, just returning dir will be enough.
Link: https://lore.kernel.org/r/20211025192746.66445-14-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
For group-wide mempool backed events, like FS_ERROR, the free_event
callback will need to reference the group's mempool to free the memory.
Wire that argument into the current callers.
Link: https://lore.kernel.org/r/20211025192746.66445-13-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
FAN_FS_ERROR allows events without inodes - i.e. for file system-wide
errors. Even though fsnotify_handle_inode_event is not currently used
by fanotify, this patch protects other backends from cases where neither
inode or dir are provided. Also document the constraints of the
interface (inode and dir cannot be both NULL).
Link: https://lore.kernel.org/r/20211025192746.66445-12-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Some file system events (i.e. FS_ERROR) might not be associated with an
inode or directory. For these, we can retrieve the super block from the
data field. But, since the super_block is available in the data field
on every event type, simplify the code to always retrieve it from there,
through a new helper.
Link: https://lore.kernel.org/r/20211025192746.66445-11-krisman@collabora.com
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fsnotify_add_event is growing in number of parameters, which in most
case are just passed a NULL pointer. So, split out a new
fsnotify_insert_event function to clean things up for users who don't
need an insert hook.
Link: https://lore.kernel.org/r/20211025192746.66445-10-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Similarly to fanotify_is_perm_event and friends, provide a helper
predicate to say whether a mask is of an overflow event.
Link: https://lore.kernel.org/r/20211025192746.66445-9-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
According to Amir:
"FS_IN_IGNORED is completely internal to inotify and there is no need
to set it in i_fsnotify_mask at all, so if we remove the bit from the
output of inotify_arg_to_mask() no functionality will change and we will
be able to overload the event bit for FS_ERROR."
This is done in preparation to overload FS_ERROR with the notification
mechanism in fanotify.
Link: https://lore.kernel.org/r/20211025192746.66445-8-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
FAN_FS_ERROR will require fsid, but not necessarily require the
filesystem to expose a file handle. Split those checks into different
functions, so they can be used separately when setting up an event.
While there, update a comment about tmpfs having 0 fsid, which is no
longer true.
Link: https://lore.kernel.org/r/20211025192746.66445-7-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Every time this function is invoked, it is immediately added to
FAN_EVENT_METADATA_LEN, since there is no need to just calculate the
length of info records. This minor clean up folds the rest of the
calculation into the function, which now operates in terms of events,
returning the size of the entire event, including metadata.
Link: https://lore.kernel.org/r/20211025192746.66445-6-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Some events, like the overflow event, are not mergeable, so they are not
hashed. But, when failing inside fsnotify_add_event for lack of space,
fsnotify_add_event() still calls the insert hook, which adds the
overflow event to the merge list. Add a check to prevent any kind of
unmergeable event to be inserted in the hashtable.
Fixes: 94e00d28a680 ("fsnotify: use hash table for faster events merge")
Link: https://lore.kernel.org/r/20211025192746.66445-5-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Fix a leak in s_fsnotify_connectors counter in case of a race between
concurrent add of new fsnotify mark to an object.
The task that lost the race fails to drop the counter before freeing
the unused connector.
Following umount() hangs in fsnotify_sb_delete()/wait_var_event(),
because s_fsnotify_connectors never drops to zero.
Fixes: ec44610fe2b8 ("fsnotify: count all objects with attached connectors")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Link: https://lore.kernel.org/linux-fsdevel/20210907063338.ycaw6wvhzrfsfdlp@xzhoux.usersys.redhat.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify speedups when notification actually isn't used and support
for identifying processes which caused fanotify events through pidfd
instead of normal pid"
* tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: optimize the case of no marks of any type
fsnotify: count all objects with attached connectors
fsnotify: count s_fsnotify_inode_refs for attached connectors
fsnotify: replace igrab() with ihold() on attach connector
fanotify: add pidfd support to the fanotify API
fanotify: introduce a generic info record copying helper
fanotify: minor cosmetic adjustments to fid labels
kernel/pid.c: implement additional checks upon pidfd_create() parameters
kernel/pid.c: remove static qualifier from pidfd_create()
|
|
Rename s_fsnotify_inode_refs to s_fsnotify_connectors and count all
objects with attached connectors, not only inodes with attached
connectors.
This will be used to optimize fsnotify() calls on sb without any
type of marks.
Link: https://lore.kernel.org/r/20210810151220.285179-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Instead of incrementing s_fsnotify_inode_refs when detaching connector
from inode, increment it earlier when attaching connector to inode.
Next patch is going to use s_fsnotify_inode_refs to count all objects
with attached connectors.
Link: https://lore.kernel.org/r/20210810151220.285179-3-amir73il@gmail.com
Reviewed-by: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
We must have a reference on inode, so ihold is cheaper.
Link: https://lore.kernel.org/r/20210810151220.285179-2-amir73il@gmail.com
Reviewed-by: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Introduce a new flag FAN_REPORT_PIDFD for fanotify_init(2) which
allows userspace applications to control whether a pidfd information
record containing a pidfd is to be returned alongside the generic
event metadata for each event.
If FAN_REPORT_PIDFD is enabled for a notification group, an additional
struct fanotify_event_info_pidfd object type will be supplied
alongside the generic struct fanotify_event_metadata for a single
event. This functionality is analogous to that of FAN_REPORT_FID in
terms of how the event structure is supplied to a userspace
application. Usage of FAN_REPORT_PIDFD with
FAN_REPORT_FID/FAN_REPORT_DFID_NAME is permitted, and in this case a
struct fanotify_event_info_pidfd object will likely follow any struct
fanotify_event_info_fid object.
Currently, the usage of the FAN_REPORT_TID flag is not permitted along
with FAN_REPORT_PIDFD as the pidfd API currently only supports the
creation of pidfds for thread-group leaders. Additionally, usage of
the FAN_REPORT_PIDFD flag is limited to privileged processes only
i.e. event listeners that are running with the CAP_SYS_ADMIN
capability. Attempting to supply the FAN_REPORT_TID initialization
flags with FAN_REPORT_PIDFD or creating a notification group without
CAP_SYS_ADMIN will result with -EINVAL being returned to the caller.
In the event of a pidfd creation error, there are two types of error
values that can be reported back to the listener. There is
FAN_NOPIDFD, which will be reported in cases where the process
responsible for generating the event has terminated prior to the event
listener being able to read the event. Then there is FAN_EPIDFD, which
will be reported when a more generic pidfd creation error has occurred
when fanotify calls pidfd_create().
Link: https://lore.kernel.org/r/5f9e09cff7ed62bfaa51c1369e0f7ea5f16a91aa.1628398044.git.repnop@google.com
Signed-off-by: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The copy_info_records_to_user() helper allows for the separation of
info record copying routines/conditionals from copy_event_to_user(),
which reduces the overall clutter within this function. This becomes
especially true as we start introducing additional info records in the
future i.e. struct fanotify_event_info_pidfd. On success, this helper
returns the total amount of bytes that have been copied into the user
supplied buffer and on error, a negative value is returned to the
caller.
The newly defined macro FANOTIFY_INFO_MODES can be used to obtain info
record types that have been enabled for a specific notification
group. This macro becomes useful in the subsequent patch when the
FAN_REPORT_PIDFD initialization flag is introduced.
Link: https://lore.kernel.org/r/8872947dfe12ce8ae6e9a7f2d49ea29bc8006af0.1628398044.git.repnop@google.com
Signed-off-by: Matthew Bobrowski <repnop@google.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
With the idea to support additional info record types in the future
i.e. fanotify_event_info_pidfd, it's a good idea to rename some of the
labels assigned to some of the existing fid related functions,
parameters, etc which more accurately represent the intent behind
their usage.
For example, copy_info_to_user() was defined with a generic function
label, which arguably reads as being supportive of different info
record types, however the parameter list for this function is
explicitly tailored towards the creation and copying of the
fanotify_event_info_fid records. This same point applies to the macro
defined as FANOTIFY_INFO_HDR_LEN.
With fanotify_event_info_len(), we change the parameter label so that
the function implies that it can be extended to calculate the length
for additional info record types.
Link: https://lore.kernel.org/r/7c3ec33f3c718dac40764305d4d494d858f59c51.1628398044.git.repnop@google.com
Signed-off-by: Matthew Bobrowski <repnop@google.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
commit f9c82a4ea89c3 ("Increase size of ucounts to atomic_long_t")
changed the data type of ucounts/ucounts_max to long, but missed to
adjust a few other places. This is noticeable on big endian platforms
from user space because the /proc/sys/user/max_*_names files all
contain 0.
v4 - Made the min and max constants long so the sysctl values
are actually settable on little endian machines.
-- EWB
Fixes: f9c82a4ea89c ("Increase size of ucounts to atomic_long_t")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Acked-by: Alexey Gladkov <legion@kernel.org>
v1: https://lkml.kernel.org/r/20210721115800.910778-1-svens@linux.ibm.com
v2: https://lkml.kernel.org/r/20210721125233.1041429-1-svens@linux.ibm.com
v3: https://lkml.kernel.org/r/20210730062854.3601635-1-svens@linux.ibm.com
Link: https://lkml.kernel.org/r/8735rijqlv.fsf_-_@disp2133
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Ensure that clean up is performed on the allocated file descriptor and
struct file object in the event that an error is encountered while copying
fid info objects. Currently, we return directly to the caller when an error
is experienced in the fid info copying helper, which isn't ideal given that
the listener process could be left with a dangling file descriptor in their
fdtable.
Fixes: 5e469c830fdb ("fanotify: copy event fid info to user")
Fixes: 44d705b0370b ("fanotify: report name info for FAN_DIR_MODIFY event")
Link: https://lore.kernel.org/linux-fsdevel/YMKv1U7tNPK955ho@google.com/T/#m15361cd6399dad4396aad650de25dbf6b312288e
Link: https://lore.kernel.org/r/1ef8ae9100101eb1a91763c516c2e9a3a3b112bd.1623376346.git.repnop@google.com
Signed-off-by: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Reporting event->pid should depend on the privileges of the user that
initialized the group, not the privileges of the user reading the
events.
Use an internal group flag FANOTIFY_UNPRIV to record the fact that the
group was initialized by an unprivileged user.
To be on the safe side, the premissions to setup filesystem and mount
marks now require that both the user that initialized the group and
the user setting up the mark have CAP_SYS_ADMIN.
Link: https://lore.kernel.org/linux-fsdevel/CAOQ4uxiA77_P5vtv7e83g0+9d7B5W9ZTE4GfQEYbWmfT1rA=VA@mail.gmail.com/
Fixes: 7cea2a3c505e ("fanotify: support limited functionality for unprivileged users")
Cc: <Stable@vger.kernel.org> # v5.12+
Link: https://lore.kernel.org/r/20210524135321.2190062-1-amir73il@gmail.com
Reviewed-by: Matthew Bobrowski <repnop@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
I don't see an obvious reason why the upper 32 bit check needs to be
open-coded this way. Switch to upper_32_bits() which is more idiomatic and
should conceptually be the same check.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210325083742.2334933-1-brauner@kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add limited support for unprivileged fanotify groups.
An unprivileged users is not allowed to get an open file descriptor in
the event nor the process pid of another process. An unprivileged user
cannot request permission events, cannot set mount/filesystem marks and
cannot request unlimited queue/marks.
This enables the limited functionality similar to inotify when watching a
set of files and directories for OPEN/ACCESS/MODIFY/CLOSE events, without
requiring SYS_CAP_ADMIN privileges.
The FAN_REPORT_DFID_NAME init flag, provide a method for an unprivileged
listener watching a set of directories (with FAN_EVENT_ON_CHILD) to monitor
all changes inside those directories.
This typically requires that the listener keeps a map of watched directory
fid to dirfd (O_PATH), where fid is obtained with name_to_handle_at()
before starting to watch for changes.
When getting an event, the reported fid of the parent should be resolved
to dirfd and fstatsat(2) with dirfd and name should be used to query the
state of the filesystem entry.
Link: https://lore.kernel.org/r/20210304112921.3996419-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fanotify has some hardcoded limits. The only APIs to escape those limits
are FAN_UNLIMITED_QUEUE and FAN_UNLIMITED_MARKS.
Allow finer grained tuning of the system limits via sysfs tunables under
/proc/sys/fs/fanotify, similar to tunables under /proc/sys/fs/inotify,
with some minor differences.
- max_queued_events - global system tunable for group queue size limit.
Like the inotify tunable with the same name, it defaults to 16384 and
applies on initialization of a new group.
- max_user_marks - user ns tunable for marks limit per user.
Like the inotify tunable named max_user_watches, on a machine with
sufficient RAM and it defaults to 1048576 in init userns and can be
further limited per containing user ns.
- max_user_groups - user ns tunable for number of groups per user.
Like the inotify tunable named max_user_instances, it defaults to 128
in init userns and can be further limited per containing user ns.
The slightly different tunable names used for fanotify are derived from
the "group" and "mark" terminology used in the fanotify man pages and
throughout the code.
Considering the fact that the default value for max_user_instances was
increased in kernel v5.10 from 8192 to 1048576, leaving the legacy
fanotify limit of 8192 marks per group in addition to the max_user_marks
limit makes little sense, so the per group marks limit has been removed.
Note that when a group is initialized with FAN_UNLIMITED_MARKS, its own
marks are not accounted in the per user marks account, so in effect the
limit of max_user_marks is only for the collection of groups that are
not initialized with FAN_UNLIMITED_MARKS.
Link: https://lore.kernel.org/r/20210304112921.3996419-2-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Event merges are expensive when event queue size is large, so limit the
linear search to 128 merge tests.
In combination with 128 size hash table, there is a potential to merge
with up to 16K events in the hashed queue.
Link: https://lore.kernel.org/r/20210304104826.3993892-6-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
In order to improve event merge performance, hash events in a 128 size
hash table by the event merge key.
The fanotify_event size grows by two pointers, but we just reduced its
size by removing the objectid member, so overall its size is increased
by one pointer.
Permission events and overflow event are not merged so they are also
not hashed.
Link: https://lore.kernel.org/r/20210304104826.3993892-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Improve the merge key hash by mixing more values relevant for merge.
For example, all FAN_CREATE name events in the same dir used to have the
same merge key based on the dir inode. With this change the created
file name is mixed into the merge key.
The object id that was used as merge key is redundant to the event info
so it is no longer mixed into the hash.
Permission events are not hashed, so no need to hash their info.
Link: https://lore.kernel.org/r/20210304104826.3993892-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
objectid is only used by fanotify backend and it is just an optimization
for event merge before comparing all fields in event.
Move the objectid member from common struct fsnotify_event into struct
fanotify_event and reduce it to 29-bit hash to cram it together with the
3-bit event type.
Events of different types are never merged, so the combination of event
type and hash form a 32-bit key for fast compare of events.
This reduces the size of events by one pointer and paves the way for
adding hashed queue support for fanotify.
Link: https://lore.kernel.org/r/20210304104826.3993892-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Current code has an assumtion that fsnotify_notify_queue_is_empty() is
called to verify that queue is not empty before trying to peek or remove
an event from queue.
Remove this assumption by moving the fsnotify_notify_queue_is_empty()
into the functions, allow them to return NULL value and check return
value by all callers.
This is a prep patch for multi event queues.
Link: https://lore.kernel.org/r/20210304104826.3993892-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify update from Jan Kara:
"Make inotify groups be charged against appropriate memcgs"
* tag 'fsnotify_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify, memcg: account inotify instances to kmemcg
|
|
Add two simple helpers to check permissions on a file and path
respectively and convert over some callers. It simplifies quite a few
codepaths and also reduces the churn in later patches quite a bit.
Christoph also correctly points out that this makes codepaths (e.g.
ioctls) way easier to follow that would otherwise have to do more
complex argument passing than necessary.
Link: https://lore.kernel.org/r/20210121131959.646623-4-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Currently the fs sysctl inotify/max_user_instances is used to limit the
number of inotify instances on the system. For systems running multiple
workloads, the per-user namespace sysctl max_inotify_instances can be
used to further partition inotify instances. However there is no easy
way to set a sensible system level max limit on inotify instances and
further partition it between the workloads. It is much easier to charge
the underlying resource (i.e. memory) behind the inotify instances to
the memcg of the workload and let their memory limits limit the number
of inotify instances they can create.
With inotify instances charged to memcg, the admin can simply set
max_user_instances to INT_MAX and let the memcg limits of the jobs limit
their inotify instances.
Link: https://lore.kernel.org/r/20201220044608.1258123-1-shakeelb@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Commit
121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
converted native x86-32 which take 64-bit arguments to use the
compat handlers to allow conversion to passing args via pt_regs.
sys_fanotify_mark() was however missed, as it has a general compat
handler. Add a config option that will use the syscall wrapper that
takes the split args for native 32-bit.
[ bp: Fix typo in Kconfig help text. ]
Fixes: 121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
Reported-by: Paweł Jasiak <pawel@jasiak.xyz>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A few fsnotify fixes from Amir fixing fallout from big fsnotify
overhaul a few months back and an improvement of defaults limiting
maximum number of inotify watches from Waiman"
* tag 'fsnotify_for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: fix events reported to watching parent and child
inotify: convert to handle_inode_event() interface
fsnotify: generalize handle_inode_event()
inotify: Increase default inotify.max_user_watches limit to 1048576
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull execve updates from Eric Biederman:
"This set of changes ultimately fixes the interaction of posix file
lock and exec. Fundamentally most of the change is just moving where
unshare_files is called during exec, and tweaking the users of
files_struct so that the count of files_struct is not unnecessarily
played with.
Along the way fcheck and related helpers were renamed to more
accurately reflect what they do.
There were also many other small changes that fell out, as this is the
first time in a long time much of this code has been touched.
Benchmarks haven't turned up any practical issues but Al Viro has
observed a possibility for a lot of pounding on task_lock. So I have
some changes in progress to convert put_files_struct to always rcu
free files_struct. That wasn't ready for the merge window so that will
have to wait until next time"
* 'exec-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
exec: Move io_uring_task_cancel after the point of no return
coredump: Document coredump code exclusively used by cell spufs
file: Remove get_files_struct
file: Rename __close_fd_get_file close_fd_get_file
file: Replace ksys_close with close_fd
file: Rename __close_fd to close_fd and remove the files parameter
file: Merge __alloc_fd into alloc_fd
file: In f_dupfd read RLIMIT_NOFILE once.
file: Merge __fd_install into fd_install
proc/fd: In fdinfo seq_show don't use get_files_struct
bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu
proc/fd: In proc_readfd_common use task_lookup_next_fd_rcu
file: Implement task_lookup_next_fd_rcu
kcmp: In get_file_raw_ptr use task_lookup_fd_rcu
proc/fd: In tid_fd_mode use task_lookup_fd_rcu
file: Implement task_lookup_fd_rcu
file: Rename fcheck lookup_fd_rcu
file: Replace fcheck_files with files_lookup_fd_rcu
file: Factor files_lookup_fd_locked out of fcheck_files
file: Rename __fcheck_files to files_lookup_fd_raw
...
|
|
fsnotify_parent() used to send two separate events to backends when a
parent inode is watching children and the child inode is also watching.
In an attempt to avoid duplicate events in fanotify, we unified the two
backend callbacks to a single callback and handled the reporting of the
two separate events for the relevant backends (inotify and dnotify).
However the handling is buggy and can result in inotify and dnotify
listeners receiving events of the type they never asked for or spurious
events.
The problem is the unified event callback with two inode marks (parent and
child) is called when any of the parent and child inodes are watched and
interested in the event, but the parent inode's mark that is interested
in the event on the child is not necessarily the one we are currently
reporting to (it could belong to a different group).
So before reporting the parent or child event flavor to backend we need
to check that the mark is really interested in that event flavor.
The semantics of INODE and CHILD marks were hard to follow and made the
logic more complicated than it should have been. Replace it with INODE
and PARENT marks semantics to hopefully make the logic more clear.
Thanks to Hugh Dickins for spotting a bug in the earlier version of this
patch.
Fixes: 497b0c5a7c06 ("fsnotify: send event to parent and child with single callback")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201202120713.702387-4-amir73il@gmail.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
