summaryrefslogtreecommitdiff
path: root/fs/ocfs2/cluster
AgeCommit message (Collapse)Author
2016-05-27ocfs2: bump up o2cb network protocol versionJunxiao Bi
Two new messages are added to support negotiating hb timeout. Stop nodes frmo talking an old version to mount as they will cause the negotiation to fail. Link: http://lkml.kernel.org/r/1464231615-27939-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27ocfs2: o2hb: fix hb hung timeJunxiao Bi
hr_last_timeout_start should be set as the last time where hb is still OK. When hb write timeout, hung time will be (jiffies - hr_last_timeout_start). Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Gang He <ghe@suse.com> Cc: rwxybh <rwxybh@126.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27ocfs2: o2hb: don't negotiate if last hb failJunxiao Bi
Sometimes io error is returned when storage is down for a while. Like for iscsi device, stroage is made offline when session timeout, and this will make all io return -EIO. For this case, nodes shouldn't do negotiate timeout but should fence self. So let nodes fence self when o2hb_do_disk_heartbeat return an error, this is the same behavior with o2hb without negotiate timer. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Gang He <ghe@suse.com> Cc: rwxybh <rwxybh@126.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27ocfs2: o2hb: add some user/debug logJunxiao Bi
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Gang He <ghe@suse.com> Cc: rwxybh <rwxybh@126.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27ocfs2: o2hb: add NEGOTIATE_APPROVE messageJunxiao Bi
This message is used to re-queue write timeout timer and negotiate timer when all nodes suffer a write hung to storage, this makes node not fence self if storage down. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Gang He <ghe@suse.com> Cc: rwxybh <rwxybh@126.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27ocfs2: o2hb: add NEGO_TIMEOUT messageJunxiao Bi
This message is sent to master node when non-master nodes's negotiate timer expired. Master node records these nodes in a bitmap which is used to do write timeout timer re-queue decision. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Gang He <ghe@suse.com> Cc: rwxybh <rwxybh@126.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27ocfs2: o2hb: add negotiate timerJunxiao Bi
This series of patches is to fix the issue that when storage down, all nodes will fence self due to write timeout. With this patch set, all nodes will keep going until storage back online, except if the following issue happens, then all nodes will do as before to fence self. 1. io error got 2. network between nodes down 3. nodes panic This patch (of 6): When storage down, all nodes will fence self due to write timeout. The negotiate timer is designed to avoid this, with it node will wait until storage up again. Negotiate timer working in the following way: 1. The timer expires before write timeout timer, its timeout is half of write timeout now. It is re-queued along with write timeout timer. If expires, it will send NEGO_TIMEOUT message to master node(node with lowest node number). This message does nothing but marks a bit in a bitmap recording which nodes are negotiating timeout on master node. 2. If storage down, nodes will send this message to master node, then when master node finds its bitmap including all online nodes, it sends NEGO_APPROVL message to all nodes one by one, this message will re-queue write timeout timer and negotiate timer. For any node doesn't receive this message or meets some issue when handling this message, it will be fenced. If storage up at any time, o2hb_thread will run and re-queue all the timer, nothing will be affected by these two steps. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Gang He <ghe@suse.com> Cc: rwxybh <rwxybh@126.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes and more updates from David Miller: 1) Tunneling fixes from Tom Herbert and Alexander Duyck. 2) AF_UNIX updates some struct sock bit fields with the socket lock, whereas setsockopt() sets overlapping ones with locking. Seperate out the synchronized vs. the AF_UNIX unsynchronized ones to avoid corruption. From Andrey Ryabinin. 3) Mount BPF filesystem with mount_nodev rather than mount_ns, from Eric Biederman. 4) A couple kmemdup conversions, from Muhammad Falak R Wani. 5) BPF verifier fixes from Alexei Starovoitov. 6) Don't let tunneled UDP packets get stuck in socket queues, if something goes wrong during the encapsulation just drop the packet rather than signalling an error up the call stack. From Hannes Frederic Sowa. 7) SKB ref after free in batman-adv, from Florian Westphal. 8) TCP iSCSI, ocfs2, rds, and tipc have to disable BH in it's TCP callbacks since the TCP stack runs pre-emptibly now. From Eric Dumazet. 9) Fix crash in fixed_phy_add, from Rabin Vincent. 10) Fix length checks in xen-netback, from Paul Durrant. 11) Fix mixup in KEY vs KEYID macsec attributes, from Sabrina Dubroca. 12) RDS connection spamming bug fixes from Sowmini Varadhan * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) net: suppress warnings on dev_alloc_skb uapi glibc compat: fix compilation when !__USE_MISC in glibc udp: prevent skbs lingering in tunnel socket queues bpf: teach verifier to recognize imm += ptr pattern bpf: support decreasing order in direct packet access net: usb: ch9200: use kmemdup ps3_gelic: use kmemdup net:liquidio: use kmemdup bpf: Use mount_nodev not mount_ns to mount the bpf filesystem net: cdc_ncm: update datagram size after changing mtu tuntap: correctly wake up process during uninit intel: Add support for IPv6 IP-in-IP offload ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUE RDS: TCP: Avoid rds connection churn from rogue SYNs RDS: TCP: rds_tcp_accept_worker() must exit gracefully when terminating rds-tcp net: sock: move ->sk_shutdown out of bitfields. ipv6: Don't reset inner headers in ip6_tnl_xmit ip4ip6: Support for GSO/GRO ip6ip6: Support for GSO/GRO ipv6: Set features for IPv6 tunnels ...
2016-05-19ocfs2: clean up unused parameter 'count' in o2hb_read_block_input()Jun Piao
Clean up unused parameter 'count' in o2hb_read_block_input(). Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19ocfs2/cluster: block BH in TCP callbacksEric Dumazet
TCP stack can now run from process context. Use read_lock_bh() variant to restore previous assumption. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Fixes: d41a69f1d390 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25ocfs2: o2hb: fix double free bugJunxiao Bi
This is a regression issue and caused the following kernel panic when do ocfs2 multiple test. BUG: unable to handle kernel paging request at 00000002000800c0 IP: [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 PGD 7bbe5067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront CPU: 2 PID: 4044 Comm: mpirun Not tainted 4.5.0-rc5-next-20160225 #1 Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 task: ffff88007a521a80 ti: ffff88007aed0000 task.ti: ffff88007aed0000 RIP: 0010:[<ffffffff81192978>] [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 RSP: 0018:ffff88007aed3a48 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000001991 RDX: 0000000000001990 RSI: 00000000024000c0 RDI: 000000000001b330 RBP: ffff88007aed3a98 R08: ffff88007d29b330 R09: 00000002000800c0 R10: 0000000c51376d87 R11: ffff8800792cac38 R12: ffff88007cc30f00 R13: 00000000024000c0 R14: ffffffff811b053f R15: ffff88007aed3ce7 FS: 0000000000000000(0000) GS:ffff88007d280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000002000800c0 CR3: 000000007aeb2000 CR4: 00000000000406e0 Call Trace: __d_alloc+0x2f/0x1a0 d_alloc+0x17/0x80 lookup_dcache+0x8a/0xc0 path_openat+0x3c3/0x1210 do_filp_open+0x80/0xe0 do_sys_open+0x110/0x200 SyS_open+0x19/0x20 do_syscall_64+0x72/0x230 entry_SYSCALL64_slow_path+0x25/0x25 Code: 05 e6 77 e7 7e 4d 8b 08 49 8b 40 10 4d 85 c9 0f 84 dd 00 00 00 48 85 c0 0f 84 d4 00 00 00 49 63 44 24 20 49 8b 3c 24 48 8d 4a 01 <49> 8b 1c 01 4c 89 c8 65 48 0f c7 0f 0f 94 c0 3c 01 75 b6 49 63 RIP kmem_cache_alloc+0x78/0x160 CR2: 00000002000800c0 ---[ end trace 823969e602e4aaac ]--- Fixes: a4a1dfa4bb8b("ocfs2/cluster: fix memory leak in o2hb_region_release") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs updates from Christoph Hellwig: - A large patch from me to simplify setting up the list of default groups by actually implementing it as a list instead of an array. - a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter on it's own, but it seems like he is trying to get rid of all CURRENT_TIME uses in file systems, which is a worthwhile goal. * tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs: configfs: switch ->default groups to a linked list configfs: Replace CURRENT_TIME by current_fs_time()
2016-03-15ocfs2/cluster: replace the interrupt safe spinlocks with common onesjiangyiwen
There actually no hardware or software interrupts in the context which using o2hb_live_lock, so we don't need to worry about race conditions caused by irq/softirq with spinlock held. Turning off irq is not good for system performance after all. Just replace them with a non interrupt safe function. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-06configfs: switch ->default groups to a linked listChristoph Hellwig
Replace the current NULL-terminated array of default groups with a linked list. This gets rid of lots of nasty code to size and/or dynamically allocate the array. While we're at it also provide a conveniant helper to remove the default groups. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget] Acked-by: Joel Becker <jlbec@evilplan.org> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
2016-02-03ocfs2/cluster: fix memory leak in o2hb_region_releaseJoseph Qi
o2hb_region_release currently doesn't free o2hb_debug_buf hr_db_elapsed_time and hr_db_pinned malloced in o2hb_debug_create. Also we should call debugfs_remove before freeing its data, to prevent the risk accessing debugfs rightly after its data has been freed. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Introduce configfs support for unlocked configfs_depend_item() (krzysztof + andrezej) - Conversion of usb-gadget target driver to new function registration interface (andrzej + sebastian) - Enable qla2xxx FC target mode support for Extended Logins (himansu + giridhar) - Enable qla2xxx FC target mode support for Exchange Offload (himansu + giridhar) - Add qla2xxx FC target mode irq affinity notification + selective command queuing. (quinn + himanshu) - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi + nab) - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to proper se_session->sess_kref + target_get_session() usage. (hch + sagi + nab) - Fix long-standing race between se_node_acl->acl_kref get and get_initiator_node_acl() lookup. (hch + nab) - Fix target/user block-size handling, and make sure netlink reaches all network namespaces (sheng + andy) Note there is an outstanding bug-fix series for remote I_T nexus port TMR LUN_RESET has been posted and still being tested, and will likely become post -rc1 material at this point" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits) scsi: qla2xxxx: avoid type mismatch in comparison target/user: Make sure netlink would reach all network namespaces target: Obtain se_node_acl->acl_kref during get_initiator_node_acl target: Convert ACL change queue_depth se_session reference usage iscsi-target: Fix potential dead-lock during node acl delete ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Wait for command completion before freeing a session target: Fix a memory leak in target_dev_lba_map_store() target: Support aborting tasks with a 64-bit tag usb/gadget: Remove set-but-not-used variables target: Remove an unused variable target: Fix indentation in target_core_configfs.c target/user: Allow user to set block size before enabling device iser-target: Fix non negative ERR_PTR isert_device_get usage target/fcoe: Add tag support to tcm_fc qla2xxx: Check for online flag instead of active reset when transmitting responses qla2xxx: Set all queues to 4k qla2xxx: Disable ZIO at start time. qla2xxx: Move atioq to a different lock to reduce lock contention ...
2016-01-14ocfs2: o2hb: increase unsteady iterationsJunxiao Bi
When run multiple xattr test of ocfs2-test on a three-nodes cluster, mount failed sometimes with the following message. o2hb: Unable to stabilize heartbeart on region D18B775E758D4D80837E8CF3D086AD4A (xvdb) Stabilize heartbeat depends on the timing order to mount ocfs2 from cluster nodes and how fast the tcp connections are established. So increase unsteady interations to leave more time for it. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-20fs: configfs: Drop unused parameter from configfs_undepend_item()Krzysztof Opasiak
subsys parameter is never used by configfs_undepend_item() so there is no point in passing it to this function. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This series contains HCH's changes to absorb configfs attribute ->show() + ->store() function pointer usage from it's original tree-wide consumers, into common configfs code. It includes usb-gadget, target w/ drivers, netconsole and ocfs2 changes to realize the improved simplicity, that now renders the original include/target/configfs_macros.h CPP magic for fabric drivers and others, unnecessary and obsolete. And with common code in place, new configfs attributes can be added easier than ever before. Note, there are further improvements in-flight from other folks for v4.5 code in configfs land, plus number of target fixes for post -rc1 code" In the meantime, a new user of the now-removed old configfs API came in through the char/misc tree in commit 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices"). This merge resolution comes from Alexander Shishkin, who updated his stm class tracing abstraction to account for the removal of the old show_attribute and store_attribute methods in commit 517982229f78 ("configfs: remove old API") from this pull. As Alexander says about that patch: "There's no need to keep an extra wrapper structure per item and the awkward show_attribute/store_attribute item ops are no longer needed. This patch converts policy code to the new api, all the while making the code quite a bit smaller and easier on the eyes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>" That patch was folded into the merge so that the tree should be fully bisectable. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits) configfs: remove old API ocfs2/cluster: use per-attribute show and store methods ocfs2/cluster: move locking into attribute store methods netconsole: use per-attribute show and store methods target: use per-attribute show and store methods spear13xx_pcie_gadget: use per-attribute show and store methods dlm: use per-attribute show and store methods usb-gadget/f_serial: use per-attribute show and store methods usb-gadget/f_phonet: use per-attribute show and store methods usb-gadget/f_obex: use per-attribute show and store methods usb-gadget/f_uac2: use per-attribute show and store methods usb-gadget/f_uac1: use per-attribute show and store methods usb-gadget/f_mass_storage: use per-attribute show and store methods usb-gadget/f_sourcesink: use per-attribute show and store methods usb-gadget/f_printer: use per-attribute show and store methods usb-gadget/f_midi: use per-attribute show and store methods usb-gadget/f_loopback: use per-attribute show and store methods usb-gadget/ether: use per-attribute show and store methods usb-gadget/f_acm: use per-attribute show and store methods usb-gadget/f_hid: use per-attribute show and store methods ...
2015-11-05ocfs2: fix race between mount and delete node/clusterJoseph Qi
There is a race case between mount and delete node/cluster, which will lead o2hb_thread to malfunctioning dead loop. o2hb_thread { o2nm_depend_this_node(); <<<<<< race window, node may have already been deleted, and then enter the loop, o2hb thread will be malfunctioning because of no configured nodes found. while (!kthread_should_stop() && !reg->hr_unclean_stop && !reg->hr_aborted_start) { } So check the return value of o2nm_depend_this_node() is needed. If node has been deleted, do not enter the loop and let mount fail. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-13ocfs2/cluster: use per-attribute show and store methodsChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-10-13ocfs2/cluster: move locking into attribute store methodsChristoph Hellwig
The test and separate set bit scheme was racy to start with, so move to do a test_and_set_bit after doing the earlier error checks inside the actual store methods. Also remove the locking for the local attribute which already has a different scheme to synchronize. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-04ocfs2: use 64bit variables to track heartbeat timeTina Ruchandani
o2hb_elapsed_msecs computes the time taken for a disk heartbeat. 'struct timeval' variables are used to store start and end times. On 32-bit systems, the 'tv_sec' component of 'struct timeval' will overflow in year 2038 and beyond. This patch solves the overflow with the following: 1. Replace o2hb_elapsed_msecs using 'ktime_t' values to measure start and end time, and built-in function 'ktime_ms_delta' to compute the elapsed time. ktime_get_real() is used since the code prints out the wallclock time. 2. Changes format string to print time as a single 64-bit nanoseconds value ("%lld") instead of seconds and microseconds. This simplifies the code since converting ktime_t to that format would need expensive computation. However, the debug log string is less readable than the previous format. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Suggested by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04ocfs2: do not log twice error messagesChristophe JAILLET
'o2hb_map_slot_data' and 'o2hb_populate_slot_data' are called from only one place, in 'o2hb_region_dev_write'. Return value is checked and 'mlog_errno' is called to log a message if it is not 0. So there is no need to call 'mlog_errno' directly within these functions. This would result on logging the message twice. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-29block: add a bi_error field to struct bioChristoph Hellwig
Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-24ocfs2: o2net: should remove debugfs in o2net_init() out branchalex chen
Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24ocfs2: remove __mlog_cpu_guessAndrew Morton
raw_smp_processor_id() is the means of avoiding the runtime preemptibility check. [akpm@linux-foundation.org: fix printk warning] Cc: Joe Perches <joe@perches.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24ocfs2: reduce object size of mlog usesJoe Perches
Using a function for __mlog_printk instead of a macro reduces the object size of built-in.o by about 190KB, or ~18% overall (x86-64 defconfig with all ocfs2 options) $ size fs/ocfs2/built-in.o* text data bss dec hex filename 870954 118471 134408 1123833 1125f9 fs/ocfs2/built-in.o,new 1064081 118071 134408 1316560 1416d0 fs/ocfs2/built-in.o.old Miscellanea: - Move the used-once __mlog_cpu_guess statement expression macro to the masklog.c file above the use in __mlog_printk function - Simplify the mlog macro moving the and/or logic and level code into __mlog_printk [akpm@linux-foundation.org: export __mlog_printk() to other ocfs2 modules] Signed-off-by: Joe Perches <joe@perches.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-21Revert "ocfs2: incorrect check for debugfs returns"Linus Torvalds
This reverts commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6. Huang Ying reports that this causes a hang at boot with debugfs disabled. It is true that the debugfs error checks are kind of confusing, and this code certainly merits more cleanup and thinking about it, but there's something wrong with the trivial "check not just for NULL, but for error pointers too" patch. Yes, with debugfs disabled, we will end up setting the o2hb_debug_dir pointer variable to an error pointer (-ENODEV), and then continue as if everything was fine. But since debugfs is disabled, all the _users_ of that pointer end up being compiled away, so even though the pointer can not be dereferenced, that's still fine. So it's confusing and somewhat questionable, but the "more correct" error checks end up causing more trouble than they fix. Reported-by: Huang Ying <ying.huang@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Chengyu Song <csong84@gatech.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: make mlog_errno return the errnoAndrew Morton
ocfs2 does mlog_errno(v); return v; in many places. Change mlog_errno() so we can do return mlog_errno(v); For some weird reason this patch reduces the size of ocfs2 by 6k: akpm3:/usr/src/25> size fs/ocfs2/ocfs2.ko text data bss dec hex filename 1146613 82767 832192 2061572 1f7504 fs/ocfs2/ocfs2.ko-before 1140857 82767 832192 2055816 1f5e88 fs/ocfs2/ocfs2.ko-after [dan.carpenter@oracle.com: double evaluation concerns in mlog_errno()] Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: alex chen <alex.chen@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: incorrect check for debugfs returnsChengyu Song
debugfs_create_dir and debugfs_create_file may return -ENODEV when debugfs is not configured, so the return value should be checked against ERROR_VALUE as well, otherwise the later dereference of the dentry pointer would crash the kernel. This patch tries to solve this problem by fixing certain checks. However, I have that found other call sites are protected by #ifdef CONFIG_DEBUG_FS. In current implementation, if CONFIG_DEBUG_FS is defined, then the above two functions will never return any ERROR_VALUE. So another possibility to fix this is to surround all the buggy checks/functions with the same #ifdef CONFIG_DEBUG_FS. But I'm not sure if this would break any functionality, as only OCFS2_FS_STATS declares dependency on DEBUG_FS. Signed-off-by: Chengyu Song <csong84@gatech.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: o2net: silence uninitialized variable warningDan Carpenter
Smatch complains that, if o2net_tx_can_proceed() returns false, then "sc" and "ret" are uninialized or maybe we are re-using the data from previous iteration. I do not know if we can hit this bug in real life but checking the return value is harmless and we may as well silence the static checker warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10ocfs2: fix wrong commentJunxiao Bi
O2NET_CONN_IDLE_DELAY is not defined, connection attempts will not be canceled due to timeout. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: o2net: fix connect expiredJunxiao Bi
Set nn_persistent_error to -ENOTCONN will stop reconnect since the "stop" condition in o2net_start_connect() will be true. stop = (nn->nn_sc || (nn->nn_persistent_error && (nn->nn_persistent_error != -ENOTCONN || timeout == 0))); This will make connection never be established if the first connection request is lost. Set nn_persistent_error to 0 when connect expired to fix this. With this changes, dlm will not be waken up when connect expired, this is OK since dlm depends on network, dlm can do nothing in this case if waken up. Let it wait there for network recover and connect built again to continue. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ocfs2: report error from o2hb_do_disk_heartbeat() to userJan Kara
Report return value of o2hb_do_disk_heartbeat() as a part of ML_HEARTBEAT message so that we know whether a heartbeat actually happened or not. This also makes assigned but otherwise unused 'ret' variable used. Coverity id: 1227053. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-05fix breakage in o2net_send_tcp_msg()Al Viro
uninitialized msghdr. Broken in "ocfs2: don't open-code kernel_recvmsg()" by me ;-/ Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-14ocfs2: replace strnicmp with strncasecmpRasmus Villemoes
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: fix a deadlock while o2net_wq doing direct memory reclaimXue jiufei
Fix a deadlock problem caused by direct memory reclaim in o2net_wq. The situation is as follows: 1) Receive a connect message from another node, node queues a work_struct o2net_listen_work. 2) o2net_wq processes this work and call the following functions: o2net_wq -> o2net_accept_one -> sock_create_lite -> sock_alloc() -> kmem_cache_alloc with GFP_KERNEL -> ____cache_alloc_node ->__alloc_pages_nodemask -> do_try_to_free_pages -> shrink_slab -> evict -> ocfs2_evict_inode -> ocfs2_drop_lock -> dlmunlock -> o2net_send_message_vec then o2net_wq wait for the unlock reply from master. 3) tcp layer received the reply, call o2net_data_ready() and queue sc_rx_work, waiting o2net_wq to process this work. 4) o2net_wq is a single thread workqueue, it process the work one by one. Right now it is still doing o2net_listen_work and cannot handle sc_rx_work. so we deadlock. Junxiao Bi's patch "mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set" (http://ozlabs.org/~akpm/mmots/broken-out/mm-clear-__gfp_fs-when-pf_memalloc_noio-is-set.patch) clears __GFP_FS in memalloc_noio_flags() besides __GFP_IO. We use memalloc_noio_save() to set process flag PF_MEMALLOC_NOIO so that all allocations done by this process are done as if GFP_NOIO was specified. We are not reentering filesystem while doing memory reclaim. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: fix deadlock between o2hb thread and o2net_wqJoseph Qi
The following case may lead to o2net_wq and o2hb thread deadlock on o2hb_callback_sem. Currently there are 2 nodes say N1, N2 in the cluster. And N2 down, at the same time, N3 tries to join the cluster. So N1 will handle node down (N2) and join (N3) simultaneously. o2hb o2net_wq ->o2hb_do_disk_heartbeat ->o2hb_check_slot ->o2hb_run_event_list ->o2hb_fire_callbacks ->down_write(&o2hb_callback_sem) ->o2net_hb_node_down_cb ->flush_workqueue(o2net_wq) ->o2net_process_message ->dlm_query_join_handler ->o2hb_check_node_heartbeating ->o2hb_fill_node_map ->down_read(&o2hb_callback_sem) No need to take o2hb_callback_sem in dlm_query_join_handler, o2hb_live_lock is enough to protect live node map. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: xMark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: jiangyiwen <jiangyiwen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: don't fire quorum before connection establishedJunxiao Bi
Firing quorum before connection established can cause unexpected node to reboot. Assume there are 3 nodes in the cluster, Node 1, 2, 3. Node 2 and 3 have wrong ip address of Node 1 in cluster.conf and global heartbeat is enabled in the cluster. After the heatbeats are started on these three nodes, Node 1 will reboot due to quorum fencing. It is similar case if Node 1's networking is not ready when starting the global heartbeat. The reboot is not friendly as customer is not fully ready for ocfs2 to work. Fix it by not allowing firing quorum before the connection is established. In this case, ocfs2 will wait until the wrong configuration is fixed or networking is up to continue. Also update the log to guide the user where to check when connection is not built for a long time. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09fs/ocfs2/cluster/netdebug.c: use seq_open_private() not seq_open()Rob Jones
Reduce boilerplate code by using seq_open_private() instead of seq_open() Note that the code in and using sc_common_open() has been quite extensively changed. Not least because there was a latent memory leak in the code as was: if sc_common_open() failed, the previously allocated buffer was not freed. Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: call o2quo_exit() if malloc failed in o2net_init()Joseph Qi
In o2net_init, if malloc failed, it directly returns -ENOMEM. Then o2quo_exit won't be called in init_o2nm. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29ocfs2: quorum: add a log for node not fencedJunxiao Bi
For debug use, we can see from the log whether the fence decision is made and why it is not fenced. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29ocfs2: o2net: set tcp user timeout to max valueJunxiao Bi
When tcp retransmit timeout(15mins), the connection will be closed. Pending messages may be lost during this time. So we set tcp user timeout to override the retransmit timeout to the max value. This is OK for ocfs2 since we have disk heartbeat, if peer crash, the disk heartbeat will timeout and it will be evicted, if disk heartbeat not timeout and connection idle for a long time, then this means the cluster enters split-brain state, since fence can't happen, we'd better keep the connection and wait network recover. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29ocfs2: o2net: don't shutdown connection when idle timeoutJunxiao Bi
This patch series is to fix a possible message lost bug in ocfs2 when network go bad. This bug will cause ocfs2 hung forever even network become good again. The messages may lost in this case. After the tcp connection is established between two nodes, an idle timer will be set to check its state periodically, if no messages are received during this time, idle timer will timeout, it will shutdown the connection and try to reconnect, so pending messages in tcp queues will be lost. This messages may be from dlm. Dlm may get hung in this case. This may cause the whole ocfs2 cluster hung. This is very possible to happen when network state goes bad. Do the reconnect is useless, it will fail if network state is still bad. Just waiting there for network recovering may be a good idea, it will not lost messages and some node will be fenced until cluster goes into split-brain state, for this case, Tcp user timeout is used to override the tcp retransmit timeout. It will timeout after 25 days, user should have notice this through the provided log and fix the network, if they don't, ocfs2 will fall back to original reconnect way. This patch (of 3): Some messages in the tcp queue maybe lost if we shutdown the connection and reconnect when idle timeout. If packets lost and reconnect success, then the ocfs2 cluster maybe hung. To fix this, we can leave the connection there and do the fence decision when idle timeout, if network recover before fence dicision is made, the connection survive without lost any messages. This bug can be saw when network state go bad. It may cause ocfs2 hung forever if some packets lost. With this fix, ocfs2 will recover from hung if network becomes good again. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10ocfs2/o2net: incorrect to terminate accepting connections loop upon ↵Tariq Saeed
rejecting an invalid one When o2net-accept-one() rejects an illegal connection, it terminates the loop picking up the remaining queued connections. This fix will continue accepting connections till the queue is emtpy. Addresses Orabug 17489469. Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com> Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04ocfs2: remove NULL assignments on staticFabian Frederick
Static values are automatically initialized to NULL. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-07Merge branch 'sched/urgent' into sched/core, to avoid conflictsIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18sched, treewide: Replace hardcoded nice values with MIN_NICE/MAX_NICEDongsheng Yang
Replace various -20/+19 hardcoded nice values with MIN_NICE/MAX_NICE. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/ff13819fd09b7a5dba5ab5ae797f2e7019bdfa17.1394532288.git.yangds.fnst@cn.fujitsu.com Cc: devel@driverdev.osuosl.org Cc: devicetree@vger.kernel.org Cc: fcoe-devel@open-fcoe.org Cc: linux390@de.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: nbd-general@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: openipmi-developer@lists.sourceforge.net Cc: qla2xxx-upstream@qlogic.com Cc: linux-arch@vger.kernel.org [ Consolidated the patches, twiddled the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-28 02:50:06 +0000