| Age | Commit message (Collapse) | Author |
|---|
|
When the index feature is disabled, ofs->indexdir is NULL.
When the index feature is enabled, ofs->indexdir has the same value as
ofs->workdir and takes an extra reference.
This makes the code harder to understand when it is not always clear
that ofs->indexdir in one function is the same dentry as ofs->workdir
in another function.
Remove this redundancy, by referencing ofs->workdir directly in index
helpers and by using the ovl_indexdir() accessor in generic code.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
On failure to parse parameters in ovl_parse_param_lowerdir(), it is
necessary to update ctx->nr with the correct nr before using
ovl_reset_lowerdirs() to release l->name.
Reported-and-tested-by: syzbot+26eedf3631650972f17c@syzkaller.appspotmail.com
Fixes: c835110b588a ("ovl: remove unused code in lowerdir param parsing")
Co-authored-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Add new mount options lowerdir+ and datadir+ that can be used to add
layers to lower layers stack one by one.
Unlike the legacy lowerdir mount option, special characters (i.e. colons
and cammas) are not unescaped with these new mount options.
The new mount options can be repeated to compose a large stack of lower
layers, but they may not be mixed with the lagacy lowerdir mount option,
because for displaying lower layers in mountinfo, we do not want to mix
escaped with unescaped lower layers path syntax.
Similar to data-only layer rules with the lowerdir mount option, the
datadir+ option must follow at least one lowerdir+ option and the
lowerdir+ option must not follow the datadir+ option.
If the legacy lowerdir mount option follows lowerdir+ and datadir+
mount options, it overrides them. Sepcifically, calling:
fsconfig(FSCONFIG_SET_STRING, "lowerdir", "", 0);
can be used to reset previously setup lower layers.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegt7VC94KkRtb1dfHG8+4OzwPBLYqhtc8=QFUxpFJE+=RQ@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
In preparation for new mount options to add lowerdirs one by one,
generalize ovl_parse_param_upperdir() into helper ovl_parse_layer()
that will be used for parsing a single lower layers.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegt7VC94KkRtb1dfHG8+4OzwPBLYqhtc8=QFUxpFJE+=RQ@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
We are about to add new mount options for adding lowerdir one by one,
but those mount options will not support escaping.
For the existing case, where lowerdir mount option is provided as a colon
separated list, store the user provided (possibly escaped) string and
display it as is when showing the lowerdir mount option.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Commit beae836e9c61 ("ovl: temporarily disable appending lowedirs")
removed the ability to append lowerdirs with syntax lowerdir=":<path>".
Remove leftover code and comments that are irrelevant with lowerdir
append mode disabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Kernel v6.5 converted overlayfs to new mount api.
As an added bonus, it also added a feature to allow appending lowerdirs
using lowerdir=:/lower2,lowerdir=::/data3 syntax.
This new syntax has raised some concerns regarding escaping of colons.
We decided to try and disable this syntax, which hasn't been in the wild
for so long and introduce it again in 6.7 using explicit mount options
lowerdir+=/lower2,datadir+=/data3.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegsr3A4YgF2YBevWa6n3=AcP7hNndG6EPMu3ncvV-AM71A@mail.gmail.com/
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Before commit b36a5780cb44 ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().
In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:
none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0
which results in broken output of the mount utility:
none on /mnt type overlay (rw,relatime,lowerdir=l)
Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Ever since commit 91c77947133f ("ovl: allow filenames with comma"), the
following example was legit overlayfs mount options:
mount -t overlay overlay -o 'lowerdir=/tmp/a\,b/lower' /mnt
The conversion to new mount api moved to using the common helper
generic_parse_monolithic() and discarded the specialized ovl_next_opt()
option separator.
Bring back ovl_next_opt() and use vfs_parse_monolithic_sep() to fix the
regression.
Reported-by: Ryan Hendrickson <ryan.hendrickson@alum.mit.edu>
Closes: https://lore.kernel.org/r/8da307fb-9318-cf78-8a27-ba5c5a0aef6d@alum.mit.edu/
Fixes: 1784fbc2ed9c ("ovl: port to new mount api")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
ovl_permission() accesses ->layers[...].mnt; we can't have ->layers
freed without an RCU delay on fs shutdown.
Fortunately, kern_unmount_array() that is used to drop those mounts
does include an RCU delay, so freeing is delayed; unfortunately, the
array passed to kern_unmount_array() is formed by mangling ->layers
contents and that happens without any delays.
The ->layers[...].name string entries are used to store the strings to
display in "lowerdir=..." by ovl_show_options(). Those entries are not
accessed in RCU walk.
Move the name strings into a separate array ofs->config.lowerdirs and
reuse the ofs->config.lowerdirs array as the temporary mount array to
pass to kern_unmount_array().
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231002023711.GP3389589@ZenIV/
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Always use OVL_FS() to retrieve the corresponding struct ovl_fs from a
struct super_block.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Add a new mount option uuid=auto, which is the default.
If a persistent UUID xattr is found it is used.
Otherwise, an existing ovelrayfs with copied up subdirs in upper dir
that was never mounted with uuid=on retains the null UUID.
A new overlayfs with no copied up subdirs, generates the persistent UUID
on first mount.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
With uuid=on, store a persistent uuid in xattr on the upper dir to
give the overlayfs instance a persistent identifier.
This also makes f_fsid persistent and more reliable for reporting
fid info in fanotify events.
uuid=on is not supported on non-upper overlayfs or with upper fs
that does not support xattrs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The legacy behavior of ovl_statfs() reports the f_fsid filled by
underlying upper fs. This fsid is not unique among overlayfs instances
on the same upper fs.
With mount option uuid=on, generate a non-persistent uuid per overlayfs
instance and use it as the seed for f_fsid, similar to tmpfs.
This is useful for reporting fanotify events with fid info from different
instances of overlayfs over the same upper fs.
The old behavior of null uuid and upper fs fsid is retained with the
mount option uuid=null, which is the default.
The mount option uuid=off that disables uuid checks in underlying layers
also retains the legacy behavior.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
This adds the scaffolding (docs, config, mount options) for supporting
the new digest field in the metacopy xattr. This contains a fs-verity
digest that need to match the fs-verity digest of the lowerdata
file. The mount option "verity" specifies how this xattr is handled.
If you enable verity ("verity=on") all existing xattrs are validated
before use, and during metacopy we generate verity xattr in the upper
metacopy file (if the source file has verity enabled). This means
later accesses can guarantee that the same data is used.
Additionally you can use "verity=require". In this mode all metacopy
files must have a valid verity xattr. For this to work metadata
copy-up must be able to create a verity xattr (so that later accesses
are validated). Therefore, in this mode, if the lower data file
doesn't have fs-verity enabled we fall back to a full copy rather than
a metacopy.
Actual implementation follows in a separate commit.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
While initially I thought that we couldn't move all new mount api
handling into params.{c,h} it turns out it is possible. So this just
moves a good chunk of code out of super.c and into params.{c,h}.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
We ran into issues where mount(8) passed multiple lower layers as one
big string through fsconfig(). But the fsconfig() FSCONFIG_SET_STRING
option is limited to 256 bytes in strndup_user(). While this would be
fixable by extending the fsconfig() buffer I'd rather encourage users to
append layers via multiple fsconfig() calls as the interface allows
nicely for this. This has also been requested as a feature before.
With this port to the new mount api the following will be possible:
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/lower1", 0);
/* set upper layer */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "upperdir", "/upper", 0);
/* append "/lower2", "/lower3", and "/lower4" */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower2:/lower3:/lower4", 0);
/* turn index feature on */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "index", "on", 0);
/* append "/lower5" */
fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", ":/lower5", 0);
Specifying ':' would have been rejected so this isn't a regression. And
we can't simply use "lowerdir=/lower" to append on top of existing
layers as "lowerdir=/lower,lowerdir=/other-lower" would make
"/other-lower" the only lower layer so we'd break uapi if we changed
this. So the ':' prefix seems a good compromise.
Users can choose to specify multiple layers at once or individual
layers. A layer is appended if it starts with ":". This requires that
the user has already added at least one layer before. If lowerdir is
specified again without a leading ":" then all previous layers are
dropped and replaced with the new layers. If lowerdir is specified and
empty than all layers are simply dropped.
An additional change is that overlayfs will now parse and resolve layers
right when they are specified in fsconfig() instead of deferring until
super block creation. This allows users to receive early errors.
It also allows users to actually use up to 500 layers something which
was theoretically possible but ended up not working due to the mount
option string passed via mount(2) being too large.
This also allows a more privileged process to set config options for a
lesser privileged process as the creds for fsconfig() and the creds for
fsopen() can differ. We could restrict that they match by enforcing that
the creds of fsopen() and fsconfig() match but I don't see why that
needs to be the case and allows for a good delegation mechanism.
Plus, in the future it means we're able to extend overlayfs mount
options and allow users to specify layers via file descriptors instead
of paths:
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower1", dirfd);
/* append */
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower2", dirfd);
/* append */
fsconfig(FSCONFIG_SET_PATH{_EMPTY}, "lowerdir", "lower3", dirfd);
/* clear all layers specified until now */
fsconfig(FSCONFIG_SET_STRING, "lowerdir", NULL, 0);
This would be especially nice if users create an overlayfs mount on top
of idmapped layers or just in general private mounts created via
open_tree(OPEN_TREE_CLONE). Those mounts would then never have to appear
anywhere in the filesystem. But for now just do the minimal thing.
We should probably aim to move more validation into ovl_fs_parse_param()
so users get errors before fsconfig(FSCONFIG_CMD_CREATE). But that can
be done in additional patches later.
This is now also rebased on top of the lazy lowerdata lookup which
allows the specificatin of data only layers using the new "::" syntax.
The rules are simple. A data only layers cannot be followed by any
regular layers and data layers must be preceeded by at least one regular
layer.
Parsing the lowerdir mount option must change because of this. The
original patchset used the old lowerdir parsing function to split a
lowerdir mount option string such as:
lowerdir=/lower1:/lower2::/lower3::/lower4
simply replacing each non-escaped ":" by "\0". So sequences of
non-escaped ":" were counted as layers. For example, the previous
lowerdir mount option above would've counted 6 layers instead of 4 and a
lowerdir mount option such as:
lowerdir="/lower1:/lower2::/lower3::/lower4:::::::::::::::::::::::::::"
would be counted as 33 layers. Other than being ugly this didn't matter
much because kern_path() would reject the first "\0" layer. However,
this overcounting of layers becomes problematic when we base allocations
on it where we very much only want to allocate space for 4 layers
instead of 33.
So the new parsing function rejects non-escaped sequences of colons
other than ":" and "::" immediately instead of relying on kern_path().
Link: https://github.com/util-linux/util-linux/issues/2287
Link: https://github.com/util-linux/util-linux/issues/1992
Link: https://bugs.archlinux.org/task/78702
Link: https://lore.kernel.org/linux-unionfs/20230530-klagen-zudem-32c0908c2108@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
