| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Fix a regression introduced in the last cycle
- Fix a use-after-free in the AIO path
- Fix a bogus warning reported by syzbot
* tag 'ovl-update-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix filattr copy-up failure
ovl: fix warning in ovl_create_real()
ovl: fix use after free in struct ovl_aio_req
|
|
This regression can be reproduced with ntfs-3g and overlayfs:
mkdir lower upper work overlay
dd if=/dev/zero of=ntfs.raw bs=1M count=2
mkntfs -F ntfs.raw
mount ntfs.raw lower
touch lower/file.txt
mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work - overlay
mv overlay/file.txt overlay/file2.txt
mv fails and (misleadingly) prints
mv: cannot move 'overlay/file.txt' to a subdirectory of itself, 'overlay/file2.txt'
The reason is that ovl_copy_fileattr() is triggered due to S_NOATIME being
set on all inodes (by fuse) regardless of fileattr.
ovl_copy_fileattr() tries to retrieve file attributes from lower file, but
that fails because filesystem does not support this ioctl (this should fail
with ENOTTY, but ntfs-3g return EINVAL instead). This failure is
propagated to origial operation (in this case rename) that triggered the
copy-up.
The fix is to ignore ENOTTY and EINVAL errors from fileattr_get() in copy
up. This also requires turning the internal ENOIOCTLCMD into ENOTTY.
As a further measure to prevent unnecessary failures, only try the
fileattr_get/set on upper if there are any flags to copy up.
Side note: a number of filesystems set S_NOATIME (and sometimes other inode
flags) irrespective of fileattr flags. This causes unnecessary calls
during copy up, which might lead to a performance issue, especially if
latency is high. To fix this, the kernel would need to differentiate
between the two cases. E.g. introduce SB_NOATIME_UPDATE, a per-sb variant
of S_NOATIME. SB_NOATIME doesn't work, because that's interpreted as
"filesystem doesn't store an atime attribute"
Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name>
Fixes: 72db82115d2b ("ovl: copy up sync/noatime fileattr flags")
Cc: <stable@vger.kernel.org> # v5.15
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Syzbot triggered the following warning in ovl_workdir_create() ->
ovl_create_real():
if (!err && WARN_ON(!newdentry->d_inode)) {
The reason is that the cgroup2 filesystem returns from mkdir without
instantiating the new dentry.
Weird filesystems such as this will be rejected by overlayfs at a later
stage during setup, but to prevent such a warning, call ovl_mkdir_real()
directly from ovl_workdir_create() and reject this case early.
Reported-and-tested-by: syzbot+75eab84fd0af9e8bf66b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Example for triggering use after free in a overlay on ext4 setup:
aio_read
ovl_read_iter
vfs_iter_read
ext4_file_read_iter
ext4_dio_read_iter
iomap_dio_rw -> -EIOCBQUEUED
/*
* Here IO is completed in a separate thread,
* ovl_aio_cleanup_handler() frees aio_req which has iocb embedded
*/
file_accessed(iocb->ki_filp); /**BOOM**/
Fix by introducing a refcount in ovl_aio_req similarly to aio_kiocb. This
guarantees that iocb is only freed after vfs_read/write_iter() returns on
underlying fs.
Fixes: 2406a307ac7d ("ovl: implement async IO routines")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20210930032228.3199690-3-yangerkun@huawei.com/
Cc: <stable@vger.kernel.org> # v5.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Normally the check at open time suffices, but e.g loop device does set
IOCB_DIRECT after doing its own checks (which are not sufficent for
overlayfs).
Make sure we don't call the underlying filesystem read/write method with
the IOCB_DIRECT if it's not supported.
Reported-by: Huang Jianan <huangjianan@oppo.com>
Fixes: 16914e6fc7e1 ("ovl: add ovl_read_iter()")
Cc: <stable@vger.kernel.org> # v4.19
Tested-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The following reproducer
mkdir lower upper work merge
touch lower/old
touch lower/new
mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
rm merge/new
mv merge/old merge/new & unlink upper/new
may result in this race:
PROCESS A:
rename("merge/old", "merge/new");
overwrite=true,ovl_lower_positive(old)=true,
ovl_dentry_is_whiteout(new)=true -> flags |= RENAME_EXCHANGE
PROCESS B:
unlink("upper/new");
PROCESS A:
lookup newdentry in new_upperdir
call vfs_rename() with negative newdentry and RENAME_EXCHANGE
Fix by adding the missing check for negative newdentry.
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Fixes: e9be9d5e76e3 ("overlay filesystem")
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Overlayfs does not cache ACL's (to avoid double caching). Instead it just
calls the underlying filesystem's i_op->get_acl(), which will return the
cached value, if possible.
In rcu path walk, however, get_cached_acl_rcu() is employed to get the
value from the cache, which will fail on overlayfs resulting in dropping
out of rcu walk mode. This can result in a big performance hit in certain
situations.
Fix by calling ->get_acl() with rcu=true in case of ACL_DONT_CACHE (which
indicates pass-through)
Reported-by: garyhuang <zjh.20052005@163.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add a rcu argument to the ->get_acl() callback to allow
get_cached_acl_rcu() to call the ->get_acl() method in the next patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If function ovl_instantiate() returns an error, ovl_cleanup will be called
and try to remove newdentry from wdir, but the newdentry has been moved to
udir at this time. This will causes BUG_ON(victim->d_parent->d_inode !=
dir) in fs/namei.c:may_delete.
Signed-off-by: chenying <chenying.kernel@bytedance.com>
Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly created inode")
Link: https://lore.kernel.org/linux-unionfs/e6496a94-a161-dc04-c38a-d2544633acb4@bytedance.com/
Cc: <stable@vger.kernel.org> # v4.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Extended attributes are usually small, but could be up to 64k in size, so
use the most efficient method for doing the allocation.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Currently we keep size, mode and times of overlay inode
as the same as upper inode, so should update ctime when
changing file attribution as well.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
It is possible that a directory tree is shared between multiple overlay
instances as a lower layer. In this case when one instance executes a file
residing on the lower layer, the other instance denies a truncate(2) call
on this file.
This only happens for truncate(2) and not for open(2) with the O_TRUNC
flag.
Fix this interference and inconsistency by removing the preliminary
i_writecount check before copy-up.
This means that unlike on normal filesystems truncate(argv[0]) will now
succeed. If this ever causes a regression in a real world use case this
needs to be revisited.
One way to fix this properly would be to keep a correct i_writecount in the
overlay inode, but that is difficult due to memory mapping code only
dealing with the real file/inode.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We get occasional reports of lookup errors due to mismatched
origin ftype from users that re-format a lower squashfs image.
Commit 13c6ad0f45fd ("ovl: document lower modification caveats")
tries to discourage the practice of re-formating lower layers and
describes the expected behavior as undefined.
Commit b0e0f69731cd ("ovl: restrict lower null uuid for "xino=auto"")
limits the configurations in which origin file handles are followed.
In addition to these measures, change the behavior in case of detecting
a mismatch origin ftype in lookup to issue a warning, not follow origin,
but not fail the lookup operation either.
That should make overall more users happy without any big consequences.
Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxgPq9E9xxwU2CDyHy-_yCZZeymg+3n+-6AqkGGE1YtwvQ@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Enable optimizations only if user opted-in for any of extended features.
If optimization is enabled, it breaks existing use case when a lower layer
directory appears after directory was created on a merged layer. If
overlay.opaque is applied, new files on lower layer are not visible.
Consider the following scenario:
- /lower and /upper are mounted to /merged
- directory /merged/new-dir is created with a file test1
- overlay is unmounted
- directory /lower/new-dir is created with a file test2
- overlay is mounted again
If opaque is applied by default, file test2 is not going to be visible
without explicitly clearing the overlay.opaque attribute
Signed-off-by: Vyacheslav Yurkov <Vyacheslav.Yurkov@bruker.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Allows to check whether any of extended features are enabled
Signed-off-by: Vyacheslav Yurkov <Vyacheslav.Yurkov@bruker.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Currently decoding origin with lower null uuid is not allowed unless user
opted-in to one of the new features that require following the lower inode
of non-dir upper (index, xino, metacopy). Now we add redirect_dir too to
that feature list.
Signed-off-by: Vyacheslav Yurkov <Vyacheslav.Yurkov@bruker.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When a lower file has immutable/append-only fileattr flags, the behavior of
overlayfs post copy up is inconsistent.
Immediattely after copy up, ovl inode still has the S_IMMUTABLE/S_APPEND
inode flags copied from lower inode, so vfs code still treats the ovl inode
as immutable/append-only. After ovl inode evict or mount cycle, the ovl
inode does not have these inode flags anymore.
We cannot copy up the immutable and append-only fileattr flags, because
immutable/append-only inodes cannot be linked and because overlayfs will
not be able to set overlay.* xattr on the upper inodes.
Instead, if any of the fileattr flags of interest exist on the lower inode,
we store them in overlay.protattr xattr on the upper inode and we read the
flags from xattr on lookup and on fileattr_get().
This gives consistent behavior post copy up regardless of inode eviction
from cache.
When user sets new fileattr flags, we update or remove the overlay.protattr
xattr.
Storing immutable/append-only fileattr flags in an xattr instead of upper
fileattr also solves other non-standard behavior issues - overlayfs can now
copy up children of "ovl-immutable" directories and lower aliases of
"ovl-immutable" hardlinks.
Reported-by: Chengguang Xu <cgxu519@mykernel.net>
Link: https://lore.kernel.org/linux-unionfs/20201226104618.239739-1-cgxu519@mykernel.net/
Link: https://lore.kernel.org/linux-unionfs/20210210190334.1212210-5-amir73il@gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When a lower file has sync/noatime fileattr flags, the behavior of
overlayfs post copy up is inconsistent.
Immediately after copy up, ovl inode still has the S_SYNC/S_NOATIME
inode flags copied from lower inode, so vfs code still treats the ovl
inode as sync/noatime. After ovl inode evict or mount cycle,
the ovl inode does not have these inode flags anymore.
To fix this inconsistency, try to copy the fileattr flags on copy up
if the upper fs supports the fileattr_set() method.
This gives consistent behavior post copy up regardless of inode eviction
from cache.
We cannot copy up the immutable/append-only inode flags in a similar
manner, because immutable/append-only inodes cannot be linked and because
overlayfs will not be able to set overlay.* xattr on the upper inodes.
Those flags will be addressed by a followup patch.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Instead of passing the overlay dentry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
One error path can result in release_dentry_name_snapshot() being called
before "name" was initialized by take_dentry_name_snapshot().
Fix by moving the release_dentry_name_snapshot() to immediately after the
only use.
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There's possibility of an ABBA deadlock in case of a splice write to an
overlayfs file and a concurrent splice write to a corresponding real file.
The call chain for splice to an overlay file:
-> do_splice [takes sb_writers on overlay file]
-> do_splice_from
-> iter_file_splice_write [takes pipe->mutex]
-> vfs_iter_write
...
-> ovl_write_iter [takes sb_writers on real file]
And the call chain for splice to a real file:
-> do_splice [takes sb_writers on real file]
-> do_splice_from
-> iter_file_splice_write [takes pipe->mutex]
Syzbot successfully bisected this to commit 82a763e61e2b ("ovl: simplify
file splice").
Fix by reverting the write part of the above commit and by adding missing
bits from ovl_write_iter() into ovl_splice_write().
Fixes: 82a763e61e2b ("ovl: simplify file splice")
Reported-and-tested-by: syzbot+579885d1a9a833336209@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
On the first getdents call, ovl_iterate() populates the readdir cache
with a list of entries, but for upper entries with origin lower inode,
p->ino remains zero.
Following getdents calls traverse the readdir cache list and call
ovl_cache_update_ino() for entries with zero p->ino to lookup the entry
in the overlay and return d_ino that is consistent with st_ino.
If the upper file was unlinked between the first getdents call and the
getdents call that lists the file entry, ovl_cache_update_ino() will not
find the entry and fall back to setting d_ino to the upper real st_ino,
which is inconsistent with how this object was presented to users.
Instead of listing a stale entry with inconsistent d_ino, simply skip
the stale entry, which is better for users.
xfstest overlay/077 is failing without this patch.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/fstests/CAOQ4uxgR_cLnC_vdU5=seP3fwqVkuZM_-WfD6maFTMbMYq=a9w@mail.gmail.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix a regression introduced in 5.2 that resulted in valid overlayfs
mounts being rejected with ELOOP (Too many levels of symbolic links)
- Fix bugs found by various tools
- Miscellaneous improvements and cleanups
* tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: add debug print to ovl_do_getxattr()
ovl: invalidate readdir cache on changes to dir with origin
ovl: allow upperdir inside lowerdir
ovl: show "userxattr" in the mount data
ovl: trivial typo fixes in the file inode.c
ovl: fix misspellings using codespell tool
ovl: do not copy attr several times
ovl: remove ovl_map_dev_ino() return value
ovl: fix error for ovl_fill_super()
ovl: fix missing revert_creds() on error path
ovl: fix leaked dentry
ovl: restrict lower null uuid for "xino=auto"
ovl: check that upperdir path is not on a read-only mount
ovl: plumb through flush method
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
"This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
separate method.
The interface is reasonably uniform across the filesystems that
support it and gives nice boilerplate removal"
* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
ovl: remove unneeded ioctls
fuse: convert to fileattr
fuse: add internal open/release helpers
fuse: unsigned open flags
fuse: move ioctl to separate source file
vfs: remove unused ioctl helpers
ubifs: convert to fileattr
reiserfs: convert to fileattr
ocfs2: convert to fileattr
nilfs2: convert to fileattr
jfs: convert to fileattr
hfsplus: convert to fileattr
efivars: convert to fileattr
xfs: convert to fileattr
orangefs: convert to fileattr
gfs2: convert to fileattr
f2fs: convert to fileattr
ext4: convert to fileattr
ext2: convert to fileattr
btrfs: convert to fileattr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode type handling updates from Al Viro:
"We should never change the type bits of ->i_mode or the method tables
(->i_op and ->i_fop) of a live inode.
Unfortunately, not all filesystems took care to prevent that"
* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spufs: fix bogosity in S_ISGID handling
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
openpromfs: don't do unlock_new_inode() until the new inode is set up
hostfs_mknod(): don't bother with init_special_inode()
cifs: have cifs_fattr_to_inode() refuse to change type on live inode
cifs: have ->mkdir() handle race with another client sanely
do_cifs_create(): don't set ->i_mode of something we had not created
gfs2: be careful with inode refresh
ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
vboxsf: don't allow to change the inode type
afs: Fix updating of i_mode due to 3rd party change
ceph: don't allow type or device number to change on non-I_NEW inodes
ceph: fix up error handling with snapdirs
new helper: inode_wrong_type()
|
|
mmap_region() now calls fput() on the vma->vm_file.
Fix this by using vma_set_file() so it doesn't need to be handled
manually here any more.
Link: https://lkml.kernel.org/r/20210421132012.82354-2-christian.koenig@amd.com
Fixes: 1527f926fd04 ("mm: mmap: fix fput in error path v2")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <stable@vger.kernel.org> [5.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The FS_IOC_[GS]ETFLAGS/FS_IOC_FS[GS]ETXATTR ioctls are now handled via the
fileattr api. The only unconverted filesystem remaining is CIFS and it is
not allowed to be overlayed due to case insensitive filenames.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add stacking for the fileattr operations.
Add hack for calling security_file_ioctl() for now. Probably better to
have a pair of specific hooks for these operations.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
It was the only ovl_do helper missing it.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The test in ovl_dentry_version_inc() was out-dated and did not include
the case where readdir cache is used on a non-merge dir that has origin
xattr, indicating that it may contain leftover whiteouts.
To make the code more robust, use the same helper ovl_dir_is_real()
to determine if readdir cache should be used and if readdir cache should
be invalidated.
Fixes: b79e05aaa166 ("ovl: no direct iteration for dir with origin xattr")
Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxht70nODhNHNwGFMSqDyOKLXOKrY0H6g849os4BQ7cokA@mail.gmail.com/
Cc: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Commit 146d62e5a586 ("ovl: detect overlapping layers") made sure we don't
have overlapping layers, but it also broke the arguably valid use case of
mount -olowerdir=/,upperdir=/subdir,..
where upperdir overlaps lowerdir on the same filesystem. This has been
causing regressions.
Revert the check, but only for the specific case where upperdir and/or
workdir are subdirectories of lowerdir. Any other overlap (e.g. lowerdir
is subdirectory of upperdir, etc) case is crazy, so leave the check in
place for those.
Overlaps are detected at lookup time too, so reverting the mount time check
should be safe.
Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v5.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This was missed when adding the option.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: 2d2f2d7322ff ("ovl: user xattr")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
s/peresistent/persistent/
s/xatts/xattrs/
s/annotaion/annotation/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
A typo is found out by codespell tool:
$ codespell ./fs/overlayfs/
./fs/overlayfs/util.c:217: dependig ==> depending
Fix a typo found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In ovl_xattr_set() we have already copied attr of real inode
so no need to copy it again in ovl_posix_acl_xattr_set().
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
ovl_map_dev_ino() always returns success. Remove unnecessary return value.
Signed-off-by: youngjun <her0gyugyu@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There are some places should return -EINVAL instead of -ENOMEM in
ovl_fill_super().
[Amir] Consistently set error before checking the error condition.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Smatch complains about missing that the ovl_override_creds() doesn't
have a matching revert_creds() if the dentry is disconnected. Fix this
by moving the ovl_override_creds() until after the disconnected check.
Fixes: aa3ff3c152ff ("ovl: copy up of disconnected dentries")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Since commit 6815f479ca90 ("ovl: use only uppermetacopy state in
ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a
metacopy error, which leads to dentry leaks when shutting down the related
superblock:
overlayfs: refusing to follow metacopy origin for (/file0)
...
BUG: Dentry (____ptrval____){i=3f33,n=file3} still in use (1) [unmount of overlay overlay]
...
WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d
CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1
...
RIP: 0010:umount_check.cold+0x107/0x14d
...
Call Trace:
d_walk+0x28c/0x950
? dentry_lru_isolate+0x2b0/0x2b0
? __kasan_slab_free+0x12/0x20
do_one_tree+0x33/0x60
shrink_dcache_for_umount+0x78/0x1d0
generic_shutdown_super+0x70/0x440
kill_anon_super+0x3e/0x70
deactivate_locked_super+0xc4/0x160
deactivate_super+0xfa/0x140
cleanup_mnt+0x22e/0x370
__cleanup_mnt+0x1a/0x30
task_work_run+0x139/0x210
do_exit+0xb0c/0x2820
? __kasan_check_read+0x1d/0x30
? find_held_lock+0x35/0x160
? lock_release+0x1b6/0x660
? mm_update_next_owner+0xa20/0xa20
? reacquire_held_locks+0x3f0/0x3f0
? __sanitizer_cov_trace_const_cmp4+0x22/0x30
do_group_exit+0x135/0x380
__do_sys_exit_group.isra.0+0x20/0x20
__x64_sys_exit_group+0x3c/0x50
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
...
VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds. Have a nice day...
This fix has been tested with a syzkaller reproducer.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 6815f479ca90 ("ovl: use only uppermetacopy state in ovl_lookup()")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210329164907.2133175-1-mic@digikod.net
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Commit a888db310195 ("ovl: fix regression with re-formatted lower
squashfs") attempted to fix a regression with existing setups that
use a practice that we are trying to discourage.
The discourage part was described this way in the commit message:
"To avoid the reported regression while still allowing the new features
with single lower squashfs, do not allow decoding origin with lower null
uuid unless user opted-in to one of the new features that require
following the lower inode of non-dir upper (index, xino, metacopy)."
The three mentioned features are disabled by default in Kconfig, so
it was assumed that if they are enabled, the user opted-in for them.
Apparently, distros started to configure CONFIG_OVERLAY_FS_XINO_AUTO=y
some time ago, so users upgrading their kernels can still be affected
by said regression even though they never opted-in for any new feature.
To fix this, treat "xino=on" as "user opted-in", but not "xino=auto".
Since we are changing the behavior of "xino=auto" to no longer follow
to lower origin with null uuid, take this one step further and disable
xino in that corner case. To be consistent, disable xino also in cases
of lower fs without file handle support and upper fs without xattr
support.
Update documentation w.r.t the new "xino=auto" behavior and fix the out
dated bits of documentation regarding "xino" and regarding offline
modifications to lower layers.
Link: https://lore.kernel.org/linux-unionfs/b36a429d7c563730c28d763d4d57a6fc30508a4f.1615216996.git.kevin@kevinlocke.name/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
So far we only checked that sb is not read-only.
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Filesystems can implement their own flush method that release
resources, or manipulate caches. Currently if one of these
filesystems is used with overlayfs, the flush method is not called.
[Amir: fix fd leak in ovl_flush()]
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type. We have enough of
those checks open-coded to make a helper worthwhile.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
Overlayfs's volatile option allows the user to bypass all forced sync calls
to the upperdir filesystem. This comes at the cost of safety. We can never
ensure that the user's data is intact, but we can make a best effort to
expose whether or not the data is likely to be in a bad state.
The best way to handle this in the time being is that if an overlayfs's
upperdir experiences an error after a volatile mount occurs, that error
will be returned on fsync, fdatasync, sync, and syncfs. This is
contradictory to the traditional behaviour of VFS which fails the call
once, and only raises an error if a subsequent fsync error has occurred,
and been raised by the filesystem.
One awkward aspect of the patch is that we have to manually set the
superblock's errseq_t after the sync_fs callback as opposed to just
returning an error from syncfs. This is because the call chain looks
something like this:
sys_syncfs ->
sync_filesystem ->
__sync_filesystem ->
/* The return value is ignored here
sb->s_op->sync_fs(sb)
_sync_blockdev
/* Where the VFS fetches the error to raise to userspace */
errseq_check_and_advance
Because of this we call errseq_set every time the sync_fs callback occurs.
Due to the nature of this seen / unseen dichotomy, if the upperdir is an
inconsistent state at the initial mount time, overlayfs will refuse to
mount, as overlayfs cannot get a snapshot of the upperdir's errseq that
will increment on error until the user calls syncfs.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: c86243b090bc ("ovl: provide a mount option "volatile"")
Cc: stable@vger.kernel.org
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.
When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr. This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.
This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().
ovl_copy_xattr() skips copy up of security labels that are indentified by
inode_copy_up_xattr LSM hooks, but it does that after vfs_getxattr().
Since we are not going to copy them, skip vfs_getxattr() of the security
labels.
Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We need to lock d_parent->d_lock before dget_dlock, or this may
have d_lockref updated parallelly like calltrace below which will
cause dentry->d_lockref leak and risk a crash.
CPU 0 CPU 1
ovl_set_redirect lookup_fast
ovl_get_redirect __d_lookup
dget_dlock
//no lock protection here spin_lock(&dentry->d_lock)
dentry->d_lockref.count++ dentry->d_lockref.count++
[ 49.799059] PGD 800000061fed7067 P4D 800000061fed7067 PUD 61fec5067 PMD 0
[ 49.799689] Oops: 0002 [#1] SMP PTI
[ 49.800019] CPU: 2 PID: 2332 Comm: node Not tainted 4.19.24-7.20.al7.x86_64 #1
[ 49.800678] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8a46cfe 04/01/2014
[ 49.801380] RIP: 0010:_raw_spin_lock+0xc/0x20
[ 49.803470] RSP: 0018:ffffac6fc5417e98 EFLAGS: 00010246
[ 49.803949] RAX: 0000000000000000 RBX: ffff93b8da3446c0 RCX: 0000000a00000000
[ 49.804600] RDX: 0000000000000001 RSI: 000000000000000a RDI: 0000000000000088
[ 49.805252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff993cf040
[ 49.805898] R10: ffff93b92292e580 R11: ffffd27f188a4b80 R12: 0000000000000000
[ 49.806548] R13: 00000000ffffff9c R14: 00000000fffffffe R15: ffff93b8da3446c0
[ 49.807200] FS: 00007ffbedffb700(0000) GS:ffff93b927880000(0000) knlGS:0000000000000000
[ 49.807935] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 49.808461] CR2: 0000000000000088 CR3: 00000005e3f74006 CR4: 00000000003606a0
[ 49.809113] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 49.809758] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 49.810410] Call Trace:
[ 49.810653] d_delete+0x2c/0xb0
[ 49.810951] vfs_rmdir+0xfd/0x120
[ 49.811264] do_rmdir+0x14f/0x1a0
[ 49.811573] do_syscall_64+0x5b/0x190
[ 49.811917] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 49.812385] RIP: 0033:0x7ffbf505ffd7
[ 49.814404] RSP: 002b:00007ffbedffada8 EFLAGS: 00000297 ORIG_RAX: 0000000000000054
[ 49.815098] RAX: ffffffffffffffda RBX: 00007ffbedffb640 RCX: 00007ffbf505ffd7
[ 49.815744] RDX: 0000000004449700 RSI: 0000000000000000 RDI: 0000000006c8cd50
[ 49.816394] RBP: 00007ffbedffaea0 R08: 0000000000000000 R09: 0000000000017d0b
[ 49.817038] R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000012
[ 49.817687] R13: 00000000072823d8 R14: 00007ffbedffb700 R15: 00000000072823d8
[ 49.818338] Modules linked in: pvpanic cirrusfb button qemu_fw_cfg atkbd libps2 i8042
[ 49.819052] CR2: 0000000000000088
[ 49.819368] ---[ end trace 4e652b8aa299aa2d ]---
[ 49.819796] RIP: 0010:_raw_spin_lock+0xc/0x20
[ 49.821880] RSP: 0018:ffffac6fc5417e98 EFLAGS: 00010246
[ 49.822363] RAX: 0000000000000000 RBX: ffff93b8da3446c0 RCX: 0000000a00000000
[ 49.823008] RDX: 0000000000000001 RSI: 000000000000000a RDI: 0000000000000088
[ 49.823658] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff993cf040
[ 49.825404] R10: ffff93b92292e580 R11: ffffd27f188a4b80 R12: 0000000000000000
[ 49.827147] R13: 00000000ffffff9c R14: 00000000fffffffe R15: ffff93b8da3446c0
[ 49.828890] FS: 00007ffbedffb700(0000) GS:ffff93b927880000(0000) knlGS:0000000000000000
[ 49.830725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 49.832359] CR2: 0000000000000088 CR3: 00000005e3f74006 CR4: 00000000003606a0
[ 49.834085] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 49.835792] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Cc: <stable@vger.kernel.org>
Fixes: a6c606551141 ("ovl: redirect on rename-dir")
Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The function ovl_dir_real_file() currently uses the inode lock to serialize
writes to the od->upperfile field.
However, this function will get called by ovl_ioctl_set_flags(), which
utilizes the inode lock too. In this case ovl_dir_real_file() will try to
claim a lock that is owned by a function in its call stack, which won't get
released before ovl_dir_real_file() returns.
Fix by replacing the open coded compare and exchange by an explicit atomic
op.
Fixes: 61536bed2149 ("ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories")
Cc: stable@vger.kernel.org # v5.10
Reported-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The vfs_getxattr() in ovl_xattr_set() is used to check whether an xattr
exist on a lower layer file that is to be removed. If the xattr does not
exist, then no need to copy up the file.
This call of vfs_getxattr() wasn't wrapped in credential override, and this
is probably okay. But for consitency wrap this instance as well.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
