| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs netfs updates from Christian Brauner:
"This contains read performance improvements and support for monolithic
single-blob objects that have to be read/written as such (e.g. AFS
directory contents). The implementation of the two parts is interwoven
as each makes the other possible.
- Read performance improvements
The read performance improvements are intended to speed up some
loss of performance detected in cifs and to a lesser extend in afs.
The problem is that we queue too many work items during the
collection of read results: each individual subrequest is collected
by its own work item, and then they have to interact with each
other when a series of subrequests don't exactly align with the
pattern of folios that are being read by the overall request.
Whilst the processing of the pages covered by individual
subrequests as they complete potentially allows folios to be woken
in parallel and with minimum delay, it can shuffle wakeups for
sequential reads out of order - and that is the most common I/O
pattern.
The final assessment and cleanup of an operation is then held up
until the last I/O completes - and for a synchronous sequential
operation, this means the bouncing around of work items just adds
latency.
Two changes have been made to make this work:
(1) All collection is now done in a single "work item" that works
progressively through the subrequests as they complete (and
also dispatches retries as necessary).
(2) For readahead and AIO, this work item be done on a workqueue
and can run in parallel with the ultimate consumer of the data;
for synchronous direct or unbuffered reads, the collection is
run in the application thread and not offloaded.
Functions such as smb2_readv_callback() then just tell netfslib
that the subrequest has terminated; netfslib does a minimal bit of
processing on the spot - stat counting and tracing mostly - and
then queues/wakes up the worker. This simplifies the logic as the
collector just walks sequentially through the subrequests as they
complete and walks through the folios, if buffered, unlocking them
as it goes. It also keeps to a minimum the amount of latency
injected into the filesystem's low-level I/O handling
The way netfs supports filesystems using the deprecated
PG_private_2 flag is changed: folios are flagged and added to a
write request as they complete and that takes care of scheduling
the writes to the cache. The originating read request can then just
unlock the pages whatever happens.
- Single-blob object support
Single-blob objects are files for which the content of the file
must be read from or written to the server in a single operation
because reading them in parts may yield inconsistent results. AFS
directories are an example of this as there exists the possibility
that the contents are generated on the fly and would differ between
reads or might change due to third party interference.
Such objects will be written to and retrieved from the cache if one
is present, though we allow/may need to propose multiple
subrequests to do so. The important part is that read from/write to
the *server* is monolithic.
Single blob reading is, for the moment, fully synchronous and does
result collection in the application thread and, also for the
moment, the API is supplied the buffer in the form of a folio_queue
chain rather than using the pagecache.
- Related afs changes
This series makes a number of changes to the kafs filesystem,
primarily in the area of directory handling:
- AFS's FetchData RPC reply processing is made partially
asynchronous which allows the netfs_io_request's outstanding
operation counter to be removed as part of reducing the
collection to a single work item.
- Directory and symlink reading are plumbed through netfslib using
the single-blob object API and are now cacheable with fscache.
This also allows the afs_read struct to be eliminated and
netfs_io_subrequest to be used directly instead.
- Directory and symlink content are now stored in a folio_queue
buffer rather than in the pagecache. This means we don't require
the RCU read lock and xarray iteration to access it, and folios
won't randomly disappear under us because the VM wants them
back.
- The vnode operation lock is changed from a mutex struct to a
private lock implementation. The problem is that the lock now
needs to be dropped in a separate thread and mutexes don't
permit that.
- When a new directory or symlink is created, we now initialise it
locally and mark it valid rather than downloading it (we know
what it's likely to look like).
- We now use the in-directory hashtable to reduce the number of
entries we need to scan when doing a lookup. The edit routines
have to maintain the hash chains.
- Cancellation (e.g. by signal) of an async call after the
rxrpc_call has been set up is now offloaded to the worker thread
as there will be a notification from rxrpc upon completion. This
avoids a double cleanup.
- A "rolling buffer" implementation is created to abstract out the
two separate folio_queue chaining implementations I had (one for
read and one for write).
- Functions are provided to create/extend a buffer in a folio_queue
chain and tear it down again.
This is used to handle AFS directories, but could also be used to
create bounce buffers for content crypto and transport crypto.
- The was_async argument is dropped from netfs_read_subreq_terminated()
Instead we wake the read collection work item by either queuing it
or waking up the app thread.
- We don't need to use BH-excluding locks when communicating between
the issuing thread and the collection thread as neither of them now
run in BH context.
- Also included are a number of new tracepoints; a split of the
netfslib write collection code to put retrying into its own file
(it gets more complicated with content encryption).
- There are also some minor fixes AFS included, including fixing the
AFS directory format struct layout, reducing some directory
over-invalidation and making afs_mkdir() translate EEXIST to
ENOTEMPY (which is not available on all systems the servers
support).
- Finally, there's a patch to try and detect entry into the folio
unlock function with no folio_queue structs in the buffer (which
isn't allowed in the cases that can get there).
This is a debugging patch, but should be minimal overhead"
* tag 'vfs-6.14-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
netfs: Report on NULL folioq in netfs_writeback_unlock_folios()
afs: Add a tracepoint for afs_read_receive()
afs: Locally initialise the contents of a new symlink on creation
afs: Use the contained hashtable to search a directory
afs: Make afs_mkdir() locally initialise a new directory's content
netfs: Change the read result collector to only use one work item
afs: Make {Y,}FS.FetchData an asynchronous operation
afs: Fix cleanup of immediately failed async calls
afs: Eliminate afs_read
afs: Use netfslib for symlinks, allowing them to be cached
afs: Use netfslib for directories
afs: Make afs_init_request() get a key if not given a file
netfs: Add support for caching single monolithic objects such as AFS dirs
netfs: Add functions to build/clean a buffer in a folio_queue
afs: Add more tracepoints to do with tracking validity
cachefiles: Add auxiliary data trace
cachefiles: Add some subrequest tracepoints
netfs: Remove some extraneous directory invalidations
afs: Fix directory format encoding struct
afs: Fix EEXIST error returned from afs_rmdir() to be ENOTEMPTY
...
|
|
CAP_INFOLEVEL_PASSTHRU
CIFSGetSrvInodeNumber() uses SMB_QUERY_FILE_INTERNAL_INFO (0x3ee) level
which is SMB PASSTHROUGH level (>= 0x03e8). SMB PASSTHROUGH levels are
supported only when server announce CAP_INFOLEVEL_PASSTHRU.
So add guard in cifs_query_file_info() function which is the only user of
CIFSGetSrvInodeNumber() function and returns -EOPNOTSUPP when server does
not announce CAP_INFOLEVEL_PASSTHRU.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
CAP_INFOLEVEL_PASSTHRU
CIFSSMBRenameOpenFile() uses SMB_SET_FILE_RENAME_INFORMATION (0x3f2) level
which is SMB PASSTHROUGH level (>= 0x03e8). SMB PASSTHROUGH levels are
supported only when server announce CAP_INFOLEVEL_PASSTHRU.
All usage of CIFSSMBRenameOpenFile() execept the one is already guarded by
checks which prevents calling it against servers without support for
CAP_INFOLEVEL_PASSTHRU.
The remaning usage without guard is in cifs_do_rename() function, so add
missing guard here.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Function CIFSSMBQuerySymLink() was renamed to cifs_query_reparse_point() in
commit ed3e0a149b58 ("smb: client: implement ->query_reparse_point() for
SMB1"). Remove its dead declaration from header file too.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
NT Status code is 32-bit number, so for comparing two NT Status codes is
needed to check all 32 bits, and not just low 24 bits.
Before this change kernel printed message:
"Status code returned 0x8000002d NT_STATUS_NOT_COMMITTED"
It was incorrect as because NT_STATUS_NOT_COMMITTED is defined as
0xC000002d and 0x8000002d has defined name NT_STATUS_STOPPED_ON_SYMLINK.
With this change kernel prints message:
"Status code returned 0x8000002d NT_STATUS_STOPPED_ON_SYMLINK"
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This allows cifs_print_status() to show string representation also for
these error codes.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
All fields in struct rfc1002_session_packet are in big endian. This is
because all NetBIOS packet headers are in big endian as opposite of SMB
structures which are in little endian.
Therefore use __be16 and __be32 types instead of __u16 and __u32 in
struct rfc1002_session_packet.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
in readdir.c
In all other places is used function cifs_autodisable_serverino() for
disabling CIFS_MOUNT_SERVER_INUM mount flag. So use is also in readir.c
_initiate_cifs_search() function. Benefit of cifs_autodisable_serverino()
is that it also prints dmesg message that server inode numbers are being
disabled.
Fixes: ec06aedd4454 ("cifs: clean up handling when server doesn't consistently support inode numbers")
Fixes: f534dc994397 ("cifs: clear server inode number flag while autodisabling")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We had tracepoints for the return code for querying WSL EAs
(trace_smb3_query_wsl_ea_compound_err and
trace_smb3_query_wsl_ea_compound_done) but were missing one for
trace_smb3_query_wsl_ea_compound_enter.
Fixes: ea41367b2a60 ("smb: client: introduce SMB2_OP_QUERY_WSL_EA")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The tracepoints based on smb3_inf_compound_*_class have tcon id and
session id swapped around. This results in incorrect output in
`trace-cmd report`.
Fix the order of arguments to resolve this issue. The trace-cmd output
below shows the before and after of the smb3_delete_enter and
smb3_delete_done events as an example. The smb3_cmd_* events show the
correct session and tcon id for reference.
Also fix tracepoint set -> get in the SMB2_OP_GET_REPARSE case.
BEFORE:
rm-2211 [001] ..... 1839.550888: smb3_delete_enter: xid=281 sid=0x5 tid=0x3d path=\hello2.txt
rm-2211 [001] ..... 1839.550894: smb3_cmd_enter: sid=0x1ac000000003d tid=0x5 cmd=5 mid=61
rm-2211 [001] ..... 1839.550896: smb3_cmd_enter: sid=0x1ac000000003d tid=0x5 cmd=6 mid=62
rm-2211 [001] ..... 1839.552091: smb3_cmd_done: sid=0x1ac000000003d tid=0x5 cmd=5 mid=61
rm-2211 [001] ..... 1839.552093: smb3_cmd_done: sid=0x1ac000000003d tid=0x5 cmd=6 mid=62
rm-2211 [001] ..... 1839.552103: smb3_delete_done: xid=281 sid=0x5 tid=0x3d
AFTER:
rm-2501 [001] ..... 3237.656110: smb3_delete_enter: xid=88 sid=0x1ac0000000041 tid=0x5 path=\hello2.txt
rm-2501 [001] ..... 3237.656122: smb3_cmd_enter: sid=0x1ac0000000041 tid=0x5 cmd=5 mid=84
rm-2501 [001] ..... 3237.656123: smb3_cmd_enter: sid=0x1ac0000000041 tid=0x5 cmd=6 mid=85
rm-2501 [001] ..... 3237.657909: smb3_cmd_done: sid=0x1ac0000000041 tid=0x5 cmd=5 mid=84
rm-2501 [001] ..... 3237.657909: smb3_cmd_done: sid=0x1ac0000000041 tid=0x5 cmd=6 mid=85
rm-2501 [001] ..... 3237.657922: smb3_delete_done: xid=88 sid=0x1ac0000000041 tid=0x5
Cc: stable@vger.kernel.org
Signed-off-by: Ruben Devos <devosruben6@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always
be set by the server, so the client must handle any values and then
prevent oopses like below from happening:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 1323 Comm: cat Not tainted 6.13.0-rc7 #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41
04/01/2014
RIP: 0010:cifs_debug_data_proc_show+0xa45/0x1460 [cifs] Code: 00 00 48
89 df e8 3b cd 1b c1 41 f6 44 24 2c 04 0f 84 50 01 00 00 48 89 ef e8
e7 d0 1b c1 49 8b 44 24 18 31 d2 49 8d 7c 24 28 <48> f7 74 24 18 48 89
c3 e8 6e cf 1b c1 41 8b 6c 24 28 49 8d 7c 24
RSP: 0018:ffffc90001817be0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88811230022c RCX: ffffffffc041bd99
RDX: 0000000000000000 RSI: 0000000000000567 RDI: ffff888112300228
RBP: ffff888112300218 R08: fffff52000302f5f R09: ffffed1022fa58ac
R10: ffff888117d2c566 R11: 00000000fffffffe R12: ffff888112300200
R13: 000000012a15343f R14: 0000000000000001 R15: ffff888113f2db58
FS: 00007fe27119e740(0000) GS:ffff888148600000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe2633c5000 CR3: 0000000124da0000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die+0x2e/0x50
? do_trap+0x159/0x1b0
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? do_error_trap+0x90/0x130
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? exc_divide_error+0x39/0x50
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? asm_exc_divide_error+0x1a/0x20
? cifs_debug_data_proc_show+0xa39/0x1460 [cifs]
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? seq_read_iter+0x42e/0x790
seq_read_iter+0x19a/0x790
proc_reg_read_iter+0xbe/0x110
? __pfx_proc_reg_read_iter+0x10/0x10
vfs_read+0x469/0x570
? do_user_addr_fault+0x398/0x760
? __pfx_vfs_read+0x10/0x10
? find_held_lock+0x8a/0xa0
? __pfx_lock_release+0x10/0x10
ksys_read+0xd3/0x170
? __pfx_ksys_read+0x10/0x10
? __rcu_read_unlock+0x50/0x270
? mark_held_locks+0x1a/0x90
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe271288911
Code: 00 48 8b 15 01 25 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8
20 ad 01 00 f3 0f 1e fa 80 3d b5 a7 10 00 00 74 13 31 c0 0f 05 <48> 3d
00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007ffe87c079d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007fe271288911
RDX: 0000000000040000 RSI: 00007fe2633c6000 RDI: 0000000000000003
RBP: 00007ffe87c07a00 R08: 0000000000000000 R09: 00007fe2713e6380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007fe2633c6000 R14: 0000000000000003 R15: 0000000000000000
</TASK>
Fix this by setting cifs_server_iface::speed to a sane value (1Gbps)
by default when link speed is unset.
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed")
Reported-by: Frank Sorenson <sorenson@redhat.com>
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The `smb2_symlink_err_rsp` structure was previously defined with
`ErrorContextData` as a single `__u8` byte. However, the `ErrorContextData`
field is intended to be a variable-length array based on `ErrorDataLength`.
This mismatch leads to incorrect pointer arithmetic and potential memory
access issues when processing error contexts.
Updates the `ErrorContextData` field to be a flexible array
(`__u8 ErrorContextData[]`). Additionally, it modifies the corresponding
casts in the `symlink_data()` function to properly handle the flexible
array, ensuring correct memory calculations and data handling.
These changes improve the robustness of SMB2 symlink error processing.
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Suggested-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If TCP Server is about to be destroyed (e.g. CifsExiting was set) and
it is reconnecting, stop retrying DFS targets from cached DFS referral
as this would potentially delay server shutdown in several seconds.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Return -ENOENT in parse_dfs_referrals() when server returns no targets
for a referral request as specified in
MS-DFSC 3.1.5.4.3 Receiving a Root Referral Response or Link
Referral Response:
> If the referral request is successful, but the NumberOfReferrals
> field in the referral header (as specified in section 2.2.4) is
> 0, the DFS server could not find suitable targets to return to
> the client. In this case, the client MUST fail the original I/O
> operation with STATUS_OBJECT_PATH_NOT_FOUND.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If a link referral request sent to root server was successful but
client failed to connect to all link targets, there is no need to
retry same link referral on a different root server. Set an end
marker for the DFS root referral so the client will not attempt to
re-send link referrals to different root servers on failures.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some places pass hostnames rather than UNC paths to resolve them to ip
addresses, so provide helpers to handle both cases and then stop
converting hostnames to UNC paths by inserting path delimiters into
them. Also kill @expiry parameter as it's not used anywhere.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If the user specified a DNS domain name in domain= mount option, then
use it instead of parsing it in NTLMSSP CHALLENGE_MESSAGE message.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Old Windows servers will return not fully qualified DFS targets by
default as specified in
MS-DFSC 3.2.5.5 Receiving a Root Referral Request or Link Referral
Request
| Servers SHOULD<30> return fully qualified DNS host names of
| targets in responses to root referral requests and link referral
| requests.
| ...
| <30> Section 3.2.5.5: By default, Windows Server 2003, Windows
| Server 2008, Windows Server 2008 R2, Windows Server 2012, and
| Windows Server 2012 R2 return DNS host names that are not fully
| qualified for targets.
Fix this by converting all NetBIOS host names from DFS targets to
FQDNs and try resolving them first if DNS domain name was provided in
NTLMSSP CHALLENGE_MESSAGE message from previous SMB2_SESSION_SETUP.
This also prevents the client from translating the DFS target
hostnames to another domain depending on the network domain search
order.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse FQDN of the domain in CHALLENGE_MESSAGE message as it's gonna be
useful when mounting DFS shares against old Windows Servers (2012 R2
or earlier) that return not fully qualified hostnames for DFS targets
by default.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use new helper in find_domain_name() and find_timestamp() to avoid
duplicating code.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
RIP: 0010:__slab_free+0x223/0x3c0
Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89
1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f>
0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80
RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246
RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068
RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400
RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000
R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500
R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068
FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000)
000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4:
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __reconnect_target_unlocked+0x3e/0x160 [cifs]
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0xce/0x120
? __slab_free+0x223/0x3c0
? do_error_trap+0x65/0x80
? __slab_free+0x223/0x3c0
? exc_invalid_op+0x4e/0x70
? __slab_free+0x223/0x3c0
? asm_exc_invalid_op+0x16/0x20
? __slab_free+0x223/0x3c0
? extract_hostname+0x5c/0xa0 [cifs]
? extract_hostname+0x5c/0xa0 [cifs]
? __kmalloc+0x4b/0x140
__reconnect_target_unlocked+0x3e/0x160 [cifs]
reconnect_dfs_server+0x145/0x430 [cifs]
cifs_handle_standard+0x1ad/0x1d0 [cifs]
cifs_demultiplex_thread+0x592/0x730 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0xdd/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
Fixes: 7be3248f3139 ("cifs: To match file servers, make sure the server hostname matches")
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB1 shares the mount and remount code paths with SMB2/3 and already
supports password rotation in some scenarios. This patch extends the
password rotation support to SMB1 reconnects as well.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb client fix from Steve French:
- fix unneeded session setup retry due to stale password e.g. for DFS
automounts
* tag '6.13-rc6-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: sync the root session and superblock context passwords before automounting
|
|
automounting
In some cases, when password2 becomes the working password, the
client swaps the two password fields in the root session struct, but
not in the smb3_fs_context struct in cifs_sb. DFS automounts inherit
fs context from their parent mounts. Therefore, they might end up
getting the passwords in the stale order.
The automount should succeed, because the mount function will end up
retrying with the actual password anyway. But to reduce these
unnecessary session setup retries for automounts, we can sync the
parent context's passwords with the root session's passwords before
duplicating it to the child's fs context.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Relax assertions on failure to encode file handles
The ->encode_fh() method can fail for various reasons. None of them
warrant a WARN_ON().
- Fix overlayfs file handle encoding by allowing encoding an fid from
an inode without an alias
- Make sure fuse_dir_open() handles FOPEN_KEEP_CACHE. If it's not
specified fuse needs to invaludate the directory inode page cache
- Fix qnx6 so it builds with gcc-15
- Various fixes for netfslib and ceph and nfs filesystems:
- Ignore silly rename files from afs and nfs when building header
archives
- Fix read result collection in netfslib with multiple subrequests
- Handle ENOMEM for netfslib buffered reads
- Fix oops in nfs_netfs_init_request()
- Parse the secctx command immediately in cachefiles
- Remove a redundant smp_rmb() in netfslib
- Handle recursion in read retry in netfslib
- Fix clearing of folio_queue
- Fix missing cancellation of copy-to_cache when the cache for a
file is temporarly disabled in netfslib
- Sanity check the hfs root record
- Fix zero padding data issues in concurrent write scenarios
- Fix is_mnt_ns_file() after converting nsfs to path_from_stashed()
- Fix missing declaration of init_files
- Increase I/O priority when writing revoke records in jbd2
- Flush filesystem device before updating tail sequence in jbd2
* tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
ovl: support encoding fid from inode with no alias
ovl: pass realinode to ovl_encode_real_fh() instead of realdentry
fuse: respect FOPEN_KEEP_CACHE on opendir
netfs: Fix is-caching check in read-retry
netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled
netfs: Fix ceph copy to cache on write-begin
netfs: Work around recursion by abandoning retry if nothing read
netfs: Fix missing barriers by using clear_and_wake_up_bit()
netfs: Remove redundant use of smp_rmb()
cachefiles: Parse the "secctx" immediately
nfs: Fix oops in nfs_netfs_init_request() when copying to cache
netfs: Fix enomem handling in buffered reads
netfs: Fix non-contiguous donation between completed reads
kheaders: Ignore silly-rename files
fs: relax assertions on failure to encode file handles
fs: fix missing declaration of init_files
fs: fix is_mnt_ns_file()
iomap: fix zero padding data issue in concurrent append writes
iomap: pass byte granular end position to iomap_add_to_ioend
jbd2: flush filesystem device before updating tail sequence
...
|
|
The last use of is_server_using_iface() was removed in 2022 by
commit aa45dadd34e4 ("cifs: change iface_list from array to sorted linked
list")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Previously, deferred file handles were reused only for read
operations, this commit extends to reusing deferred handles
for write operations. By reusing these handles we can reduce
the need for open/close operations over the wire.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change the way netfslib collects read results to do all the collection for
a particular read request using a single work item that walks along the
subrequest queue as subrequests make progress or complete, unlocking folios
progressively rather than doing the unlock in parallel as parallel requests
come in.
The code is remodelled to be more like the write-side code, though only
using a single stream. This makes it more directly comparable and thus
easier to duplicate fixes between the two sides.
This has a number of advantages:
(1) It's simpler. There doesn't need to be a complex donation mechanism
to handle mismatches between the size and alignment of subrequests and
folios. The collector unlocks folios as the subrequests covering each
complete.
(2) It should cause less scheduler overhead as there's a single work item
in play unlocking pages in parallel when a read gets split up into a
lot of subrequests instead of one per subrequest.
Whilst the parallellism is nice in theory, in practice, the vast
majority of loads are sequential reads of the whole file, so
committing a bunch of threads to unlocking folios out of order doesn't
help in those cases.
(3) It should make it easier to implement content decryption. A folio
cannot be decrypted until all the requests that contribute to it have
completed - and, again, most loads are sequential and so, most of the
time, we want to begin decryption sequentially (though it's great if
the decryption can happen in parallel).
There is a disadvantage in that we're losing the ability to decrypt and
unlock things on an as-things-arrive basis which may affect some
applications.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Drop the was_async argument from netfs_read_subreq_terminated(). Almost
every caller is either in process context and passes false. Some
filesystems delegate the call to a workqueue to avoid doing the work in
their network message queue parsing thread.
The only exception is netfs_cache_read_terminated() which handles
completion in the cache - which is usually a callback from the backing
filesystem in softirq context, though it can be from process context if an
error occurred. In this case, delegate to a workqueue.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wiVC5Cgyz6QKXFu6fTaA6h4CjexDR-OV9kL6Vo5x9v8=A@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-10-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Drop the error argument from netfs_read_subreq_terminated() in favour of
passing the value in subreq->error.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-9-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a tracepoint to log the lifespan of folio_queue structs. For tracing
illustrative purposes, folio_queues are tagged with the debug ID of
whatever they're related to (typically a netfs_io_request) and a debug ID
of their own.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-5-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
syzkaller reported recursion with a loop of three calls (netfs_rreq_assess,
netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack
during an unbuffered or direct I/O read.
There are a number of issues:
(1) There is no limit on the number of retries.
(2) A subrequest is supposed to be abandoned if it does not transfer
anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all
circumstances.
(3) The actual root cause, which is this:
if (atomic_dec_and_test(&rreq->nr_outstanding))
netfs_rreq_terminated(rreq, ...);
When we do a retry, we bump the rreq->nr_outstanding counter to
prevent the final cleanup phase running before we've finished
dispatching the retries. The problem is if we hit 0, we have to do
the cleanup phase - but we're in the cleanup phase and end up
repeating the retry cycle, hence the recursion.
Work around the problem by limiting the number of retries. This is based
on Lizhi Xu's patch[1], and makes the following changes:
(1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make
the filesystem set it if it managed to read or write at least one byte
of data. Clear this bit before issuing a subrequest.
(2) Add a ->retry_count member to the subrequest and increment it any time
we do a retry.
(3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with
->retry_count. If the latter is non-zero, we're doing a retry.
(4) Abandon a subrequest if retry_count is non-zero and we made no
progress.
(5) Use ->retry_count in both the write-side and the read-size.
[?] Question: Should I set a hard limit on retry_count in both read and
write? Say it hits 50, we always abandon it. The problem is that
these changes only mitigate the issue. As long as it made at least one
byte of progress, the recursion is still an issue. This patch
mitigates the problem, but does not fix the underlying cause. I have
patches that will do that, but it's an intrusive fix that's currently
pending for the next merge window.
The oops generated by KASAN looks something like:
BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000)
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI
...
RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686
...
mark_usage kernel/locking/lockdep.c:4646 [inline]
__lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825
local_lock_acquire include/linux/local_lock_internal.h:29 [inline]
___slab_alloc+0x123/0x1880 mm/slub.c:3695
__slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908
__slab_alloc_node mm/slub.c:3961 [inline]
slab_alloc_node mm/slub.c:4122 [inline]
kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141
radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253
idr_get_free+0x528/0xa40 lib/radix-tree.c:1506
idr_alloc_u32+0x191/0x2f0 lib/idr.c:46
idr_alloc+0xc1/0x130 lib/idr.c:87
p9_tag_alloc+0x394/0x870 net/9p/client.c:321
p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644
p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793
p9_client_read_once+0x443/0x820 net/9p/client.c:1570
p9_client_read+0x13f/0x1b0 net/9p/client.c:1534
v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74
netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline]
netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
...
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline]
netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline]
netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221
netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256
v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361
do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832
vfs_readv+0x4cf/0x890 fs/read_write.c:1025
do_preadv fs/read_write.c:1142 [inline]
__do_sys_preadv fs/read_write.c:1192 [inline]
__se_sys_preadv fs/read_write.c:1187 [inline]
__x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1]
Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com
Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com
Suggested-by: Lizhi Xu <lizhi.xu@windriver.com>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With recent netfs apis changes, the bytes written
value was not getting updated in /proc/fs/cifs/Stats.
Fix this by updating tcon->bytes in write operations.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.")
fixed a netns UAF by manually enabled socket refcounting
(sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)).
The reason the patch worked for that bug was because we now hold
references to the netns (get_net_track() gets a ref internally)
and they're properly released (internally, on __sk_destruct()),
but only because sk->sk_net_refcnt was set.
Problem:
(this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless
if init_net or other)
Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not
only out of cifs scope, but also technically wrong -- it's set conditionally
based on user (=1) vs kernel (=0) sockets. And net/ implementations
seem to base their user vs kernel space operations on it.
e.g. upon TCP socket close, the TCP timers are not cleared because
sk->sk_net_refcnt=1:
(cf. commit 151c9c724d05 ("tcp: properly terminate timers for kernel sockets"))
net/ipv4/tcp.c:
void tcp_close(struct sock *sk, long timeout)
{
lock_sock(sk);
__tcp_close(sk, timeout);
release_sock(sk);
if (!sk->sk_net_refcnt)
inet_csk_clear_xmit_timers_sync(sk);
sock_put(sk);
}
Which will throw a lockdep warning and then, as expected, deadlock on
tcp_write_timer().
A way to reproduce this is by running the reproducer from ef7134c7fc48
and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep
warning shows up.
Fix:
We shouldn't mess with socket internals ourselves, so do not set
sk_net_refcnt manually.
Also change __sock_create() to sock_create_kern() for explicitness.
As for non-init_net network namespaces, we deal with it the best way
we can -- hold an extra netns reference for server->ssocket and drop it
when it's released. This ensures that the netns still exists whenever
we need to create/destroy server->ssocket, but is not directly tied to
it.
Fixes: ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.")
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Repeating automatically selected options in Kconfig files is redundant, so
let's delete repeated "select NETFS_SUPPORT" that was added accidentally.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
value
Replace default hardcoded value for cifsAttrs with ATTR_ARCHIVE macro
Use SMB2_LEASE_KEY_SIZE macro for leasekey size in smb2_lease_break
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix potential problem in rmmod
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The cifs_io_request struct (a wrapper around netfs_io_request) holds open
the file on the server, even beyond the local Linux file being closed.
This can cause problems with Windows-based filesystems as the file's name
still exists after deletion until the file is closed, preventing the parent
directory from being removed and causing spurious test failures in xfstests
due to inability to remove a directory. The symptom looks something like
this in the test output:
rm: cannot remove '/mnt/scratch/test/p0/d3': Directory not empty
rm: cannot remove '/mnt/scratch/test/p1/dc/dae': Directory not empty
Fix this by waiting in unlink and rename for any outstanding I/O requests
to be completed on the target file before removing that file.
Note that this doesn't prevent Linux from trying to start new requests
after deletion if it still has the file open locally - something that's
perfectly acceptable on a UNIX system.
Note also that whilst I've marked this as fixing the commit to make cifs
use netfslib, I don't know that it won't occur before that.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
utf8s_to_utf16s() specifies pwcs as a wchar_t pointer (whether big endian
or little endian is passed in as an additional parm), so to remove a
distracting compile warning it needs to be cast as (wchar_t *) in
parse_reparse_wsl_symlink() as done by other callers.
Fixes: 06a7adf318a3 ("cifs: Add support for parsing WSL-style symlinks")
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
dfs_cache_refresh() delayed worker could race with cifs_put_tcon(), so
make sure to call list_replace_init() on @tcon->dfs_ses_list after
kworker is cancelled or finished.
Fixes: 4f42a8b54b5c ("smb: client: fix DFS interlink failover")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some servers which implement the SMB3.1.1 POSIX extensions did not
set the file type in the mode in the infolevel 100 response.
With the recent changes for checking the file type via the mode field,
this can cause the root directory to be reported incorrectly and
mounts (e.g. to ksmbd) to fail.
Fixes: 6a832bc8bbb2 ("fs/smb/client: Implement new SMB3 POSIX type")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Spares an extra revalidation request
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fixes special files against current Samba.
On the Samba server:
insgesamt 20
131958 brw-r--r-- 1 root root 0, 0 15. Nov 12:04 blockdev
131965 crw-r--r-- 1 root root 1, 1 15. Nov 12:04 chardev
131966 prw-r--r-- 1 samba samba 0 15. Nov 12:05 fifo
131953 -rw-rwxrw-+ 2 samba samba 4 18. Nov 11:37 file
131953 -rw-rwxrw-+ 2 samba samba 4 18. Nov 11:37 hardlink
131957 lrwxrwxrwx 1 samba samba 4 15. Nov 12:03 symlink -> file
131954 -rwxrwxr-x+ 1 samba samba 0 18. Nov 15:28 symlinkoversmb
Before:
ls: cannot access '/mnt/smb3unix/posix/blockdev': No data available
ls: cannot access '/mnt/smb3unix/posix/chardev': No data available
ls: cannot access '/mnt/smb3unix/posix/symlinkoversmb': No data available
ls: cannot access '/mnt/smb3unix/posix/fifo': No data available
ls: cannot access '/mnt/smb3unix/posix/symlink': No data available
total 16
? -????????? ? ? ? ? ? blockdev
? -????????? ? ? ? ? ? chardev
? -????????? ? ? ? ? ? fifo
131953 -rw-rwxrw- 2 root samba 4 Nov 18 11:37 file
131953 -rw-rwxrw- 2 root samba 4 Nov 18 11:37 hardlink
? -????????? ? ? ? ? ? symlink
? -????????? ? ? ? ? ? symlinkoversmb
After:
insgesamt 21
131958 brw-r--r-- 1 root root 0, 0 15. Nov 12:04 blockdev
131965 crw-r--r-- 1 root root 1, 1 15. Nov 12:04 chardev
131966 prw-r--r-- 1 root samba 0 15. Nov 12:05 fifo
131953 -rw-rwxrw- 2 root samba 4 18. Nov 11:37 file
131953 -rw-rwxrw- 2 root samba 4 18. Nov 11:37 hardlink
131957 lrwxrwxrwx 1 root samba 4 15. Nov 12:03 symlink -> file
131954 lrwxrwxr-x 1 root samba 23 18. Nov 15:28 symlinkoversmb -> mnt/smb3unix/posix/file
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid extra roundtrip
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
To 2.52
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Unlock before returning if smb3_sync_session_ctx_passwords() fails.
Fixes: 7e654ab7da03 ("cifs: during remount, make sure passwords are in sync")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This fixes scenarios where remount can overwrite the only currently
working password, breaking reconnect.
We recently introduced a password2 field in both ses and ctx structs.
This was done so as to allow the client to rotate passwords for a mount
without any downtime. However, when the client transparently handles
password rotation, it can swap the values of the two password fields
in the ses struct, but not in smb3_fs_context struct that hangs off
cifs_sb. This can lead to a situation where a remount unintentionally
overwrites a working password in the ses struct.
In order to fix this, we first get the passwords in ctx struct
in-sync with ses struct, before replacing them with what the passwords
that could be passed as a part of remount.
Also, in order to avoid race condition between smb2_reconnect and
smb3_reconfigure, we make sure to lock session_mutex before changing
password and password2 fields of the ses structure.
Fixes: 35f834265e0d ("smb3: fix broken reconnect when password changing on the server by allowing password rotation")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fixes the case for example where the password specified on mount is a
recently expired password, but password2 is valid. Without this patch
this mount scenario would fail.
This patch introduces the following changes to support password rotation on
mount:
1. If an existing session is not found and the new session setup results in
EACCES, EKEYEXPIRED or EKEYREVOKED, swap password and password2 (if
available), and retry the mount.
2. To match the new mount with an existing session, add conditions to check
if a) password and password2 of the new mount and the existing session are
the same, or b) password of the new mount is the same as the password2 of
the existing session, and password2 of the new mount is the same as the
password of the existing session.
3. If an existing session is found, but needs reconnect, retry the session
setup after swapping password and password2 (if available), in case the
previous attempt results in EACCES, EKEYEXPIRED or EKEYREVOKED.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL.
Fixes: ebe98f1447bb ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
