| Age | Commit message (Collapse) | Author |
|---|
|
MacOS sends a compound request including read to the server
(e.g. open-read-close). So far, ksmbd has not handled read as
a compound request. For compatibility between ksmbd and an OS that
supports SMB, This patch provides compound support for read requests.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
|
|
generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.
Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21598
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Steve French <stfrench@microsoft.com>
Message-Id: <20230705190309.579783-72-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ksmbd doesn't support compound read. If client send read-read in
compound to ksmbd, there can be memory leak from read buffer.
Windows and linux clients doesn't send it to server yet. For now,
No response from compound read. compound read will be supported soon.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21587, ZDI-CAN-21588
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
`smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session()
will always return the first request smb2 header in a compound request.
if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will
return 0, i.e. The tree id check is skipped.
This patch use ksmbd_req_buf_next() to get current command in compound.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21506
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb3_decrypt_req() validate if pdu_length is smaller than
smb2_transform_hdr size.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21589
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit 74d7970febf7 ("ksmbd: fix racy issue from using ->d_parent and
->d_name"), ksmbd can not lookup cross mount points. If last component is
a cross mount point during path lookup, check if it is crossed to follow it
down. And allow path lookup to cross a mount point when a crossmnt
parameter is set to 'yes' in smb.conf.
Cc: stable@vger.kernel.org
Fixes: 74d7970febf7 ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch add the compound request handling to the some commands.
Existing clients do not send these commands as compound requests,
but ksmbd should consider that they may come.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd does not consider the case of that smb2 session setup is
in compound request. If this is the second payload of the compound,
OOB read issue occurs while processing the first payload in
the smb2_sess_setup().
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21355
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use kvzalloc instead of kvmalloc.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The return value of ksmbd_vfs_query_maximal_access is meaningless,
it is better to modify it to void.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch validate session id and tree id in compound request.
If first operation in the compound is SMB2 ECHO request, ksmbd bypass
session and tree validation. So work->sess and work->tcon could be NULL.
If secound request in the compound access work->sess or tcon, It cause
NULL pointer dereferecing error.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21165
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd is doing write access using vfs helpers. There are the cases that
mnt_want_write() is not called in vfs helper. This patch add missing
mnt_want_write() to ksmbd vfs functions.
Cc: stable@vger.kernel.org
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The check in the beginning is
`clen + sizeof(struct smb2_neg_context) <= len_of_ctxts`,
but in the end of loop, `len_of_ctxts` will subtract
`((clen + 7) & ~0x7) + sizeof(struct smb2_neg_context)`, which causes
integer underflow when clen does the 8 alignment. We should use
`(clen + 7) & ~0x7` in the check to avoid underflow from happening.
Then there are some variables that need to be declared unsigned
instead of signed.
[ 11.671070] BUG: KASAN: slab-out-of-bounds in smb2_handle_negotiate+0x799/0x1610
[ 11.671533] Read of size 2 at addr ffff888005e86cf2 by task kworker/0:0/7
...
[ 11.673383] Call Trace:
[ 11.673541] <TASK>
[ 11.673679] dump_stack_lvl+0x33/0x50
[ 11.673913] print_report+0xcc/0x620
[ 11.674671] kasan_report+0xae/0xe0
[ 11.675171] kasan_check_range+0x35/0x1b0
[ 11.675412] smb2_handle_negotiate+0x799/0x1610
[ 11.676217] ksmbd_smb_negotiate_common+0x526/0x770
[ 11.676795] handle_ksmbd_work+0x274/0x810
...
Cc: stable@vger.kernel.org
Signed-off-by: Chih-Yen Chang <cc85nod@gmail.com>
Tested-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If filesystem support sparse file, ksmbd should return allocated size
using ->i_blocks instead of stat->size. This fix generic/694 xfstests.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check the remaining data length before accessing the context structure
to ensure that the entire structure is contained within the packet.
Additionally, since the context data length `ctxt_len` has already been
checked against the total packet length `len_of_ctxts`, update the
comparison to use `ctxt_len`.
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check request_buf length first to avoid out-of-bounds read by
req->DialectCount.
[ 3350.990282] BUG: KASAN: slab-out-of-bounds in smb2_handle_negotiate+0x35d7/0x3e60
[ 3350.990282] Read of size 2 at addr ffff88810ad61346 by task kworker/5:0/276
[ 3351.000406] Workqueue: ksmbd-io handle_ksmbd_work
[ 3351.003499] Call Trace:
[ 3351.006473] <TASK>
[ 3351.006473] dump_stack_lvl+0x8d/0xe0
[ 3351.006473] print_report+0xcc/0x620
[ 3351.006473] kasan_report+0x92/0xc0
[ 3351.006473] smb2_handle_negotiate+0x35d7/0x3e60
[ 3351.014760] ksmbd_smb_negotiate_common+0x7a7/0xf00
[ 3351.014760] handle_ksmbd_work+0x3f7/0x12d0
[ 3351.014760] process_one_work+0xa85/0x1780
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch fix the failure from smb2.credits.single_req_credits_granted
test. When client send 8192 credit request, ksmbd return 8191 credit
granted. ksmbd should give maximum possible credits that must be granted
within the range of not exceeding the max credit to client.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a case that file_present is true and path is uninitialized.
This patch change file_present is set to false by default and set to
true when patch is initialized.
Fixes: 74d7970febf7 ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:
fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
