summaryrefslogtreecommitdiff
path: root/fs/ubifs/log.c
AgeCommit message (Collapse)Author
2019-07-08ubifs: remove unnecessary check in ubifs_log_start_commitLiu Song
In ubifs_log_start_commit, the value of c->lhead_offs is zero or set to zero by code bellow. /* Switch to the next log LEB */ if (c->lhead_offs) { c->lhead_lnum = ubifs_next_log_lnum(c, c->lhead_lnum); ubifs_assert(c->lhead_lnum != c->ltail_lnum); c->lhead_offs = 0; } The value of 'len' can not exceed 'max_len' which assigned value by code bellow. max_len = UBIFS_CS_NODE_SZ + c->jhead_cnt * UBIFS_REF_NODE_SZ; The value of c->lhead_offs changed by code bellow and cannot exceed 'max_len'. c->lhead_offs += len; if (c->lhead_offs == c->leb_size) { c->lhead_lnum = ubifs_next_log_lnum(c, c->lhead_lnum); c->lhead_offs = 0; } Usually, the size of PEB is between 64KB and 256KB. So the value of c->lhead_offs is far less than c->leb_size. The check 'if (c->lhead_offs == c->leb_size)' could never to be true. Signed-off-by: Liu Song <liu.song11@zte.com.cn> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-23ubifs: Add authentication nodes to journalSascha Hauer
Nodes that are written to flash can only be authenticated through the index after the next commit. When a journal replay is necessary the nodes are not yet referenced by the index and thus can't be authenticated. This patch overcomes this situation by creating a hash over all nodes beginning from the commit start node over the reference node(s) and the buds themselves. From time to time we insert authentication nodes. Authentication nodes contain a HMAC from the current hash state, so that they can be used to authenticate a journal replay up to the point where the authentication node is. The hash is continued afterwards so that theoretically we would only have to check the HMAC of the last authentication node we find. Overall we get this picture: ,,,,,,,, ,......,........................................... ,. CS , hash1.----. hash2.----. ,. | , . |hmac . |hmac ,. v , . v . v ,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ... ,..|...,........................................... , | , , | ,,,,,,,,,,,,,,, . | hash3,----. , | , |hmac , v , v , REF#1 -> bud -> bud,-> auth ... ,,,|,,,,,,,,,,,,,,,,,, v REF#2 -> ... | V ... Note how hash3 covers CS, REF#0 and REF#1 so that it is not possible to exchange or skip any reference nodes. Unlike the picture suggests the auth nodes themselves are not hashed. With this it is possible for an offline attacker to cut each journal head or to drop the last reference node(s), but not to skip any journal heads or to reorder any operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubifs: Pass struct ubifs_info to ubifs_assert()Richard Weinberger
This allows us to have more context in ubifs_assert() and take different actions depending on the configuration. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubifs: log: Some spelling fixesSascha Hauer
- add missing article - remove misplaced 'it' - s/tress/trees Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-03-25UBIFS: extend debug/message capabilitiesSheng Yong
In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-08UBIFS: fix free log space calculationArtem Bityutskiy
Hu (hujianyang <hujianyang@huawei.com>) discovered an issue in the 'empty_log_bytes()' function, which calculates how many bytes are left in the log: " If 'c->lhead_lnum + 1 == c->ltail_lnum' and 'c->lhead_offs == c->leb_size', 'h' would equalent to 't' and 'empty_log_bytes()' would return 'c->log_bytes' instead of 0. " At this point it is not clear what would be the consequences of this, and whether this may lead to any problems, but this patch addresses the issue just in case. Cc: stable@vger.kernel.org Tested-by: hujianyang <hujianyang@huawei.com> Reported-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-08UBIFS: fix a race conditionArtem Bityutskiy
Hu (hujianyang@huawei.com) discovered a race condition which may lead to a situation when UBIFS is unable to mount the file-system after an unclean reboot. The problem is theoretical, though. In UBIFS, we have the log, which basically a set of LEBs in a certain area. The log has the tail and the head. Every time user writes data to the file-system, the UBIFS journal grows, and the log grows as well, because we append new reference nodes to the head of the log. So the head moves forward all the time, while the log tail stays at the same position. At any time, the UBIFS master node points to the tail of the log. When we mount the file-system, we scan the log, and we always start from its tail, because this is where the master node points to. The only occasion when the tail of the log changes is the commit operation. The commit operation has 2 phases - "commit start" and "commit end". The former is relatively short, and does not involve much I/O. During this phase we mostly just build various in-memory lists of the things which have to be written to the flash media during "commit end" phase. During the commit start phase, what we do is we "clean" the log. Indeed, the commit operation will index all the data in the journal, so the entire journal "disappears", and therefore the data in the log become unneeded. So we just move the head of the log to the next LEB, and write the CS node there. This LEB will be the tail of the new log when the commit operation finishes. When the "commit start" phase finishes, users may write more data to the file-system, in parallel with the ongoing "commit end" operation. At this point the log tail was not changed yet, it is the same as it had been before we started the commit. The log head keeps moving forward, though. The commit operation now needs to write the new master node, and the new master node should point to the new log tail. After this the LEBs between the old log tail and the new log tail can be unmapped and re-used again. And here is the possible problem. We do 2 operations: (a) We first update the log tail position in memory (see 'ubifs_log_end_commit()'). (b) And then we write the master node (see the big lock of code in 'do_commit()'). But nothing prevents the log head from moving forward between (a) and (b), and the log head may "wrap" now to the old log tail. And when the "wrap" happens, the contends of the log tail gets erased. Now a power cut happens and we are in trouble. We end up with the old master node pointing to the old tail, which was erased. And replay fails because it expects the master node to point to the correct log tail at all times. This patch merges the abovementioned (a) and (b) operations by moving the master node change code to the 'ubifs_log_end_commit()' function, so that it runs with the log mutex locked, which will prevent the log from being changed benween operations (a) and (b). Cc: stable@vger.kernel.org # 07e19df UBIFS: remove mst_mutex Cc: stable@vger.kernel.org Reported-by: hujianyang <hujianyang@huawei.com> Tested-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-31UBIFS: Add log overlap assertionshujianyang
We use a circle area to record the log nodes in ubifs. This log area should not be overlapped. But after researching the code, I found some conditions may lead log head wraps log ltail. Although we've fixed the problems discovered, there may be some other issues still left. This patch adds assertions where lhead changes to next leb to make sure ltail is not wrapped. Signed-off-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-19UBIFS: remove unnecessary checkArtem Bityutskiy
Remove the "if (c->lhead_offs == 0)" check because is unnecessary, since at that point the log head offset is guaranteed to be zero due to the previous operation. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-01-23fs/ubifs: use rbtree postorder iteration helper instead of opencodingCody P Schafer
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead of opencoding an alternate postorder iteration that modifies the tree Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Michel Lespinasse <walken@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-31UBIFS: comply with coding styleArtem Bityutskiy
Join all the split printk lines in order to stop checkpatch complaining. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-20UBI: Kill data type hintRichard Weinberger
We do not need this feature and to our shame it even was not working and there was a bug found very recently. -- Artem Bityutskiy Without the data type hint UBI2 (fastmap) will be easier to implement. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-16UBIFS: remove Kconfig debugging optionArtem Bityutskiy
Have the debugging stuff always compiled-in instead. It simplifies maintanance a lot. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-07-04UBIFS: switch to I/O helpersArtem Bityutskiy
Switch the rest of direct UBI calls to UBIFS helper functions. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04UBIFS: introduce helper functions for debugging checks and testsArtem Bityutskiy
This patch introduces helper functions for all debugging checks, so instead of doing if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) we now do if (!dbg_is_chk_gen(c)) This is a preparation to further changes where the flags will go away, and we'll need to only change the helper functions, but the code which utilizes them won't be touched. At the same time this patch removes 'dbg_force_in_the_gaps()', 'dbg_force_in_the_gaps_enabled()', and dbg_failure_mode helpers for consistency. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-16UBIFS: share the next_log_lnum helperArtem Bityutskiy
We'll need to use the 'next_log_lnum()' helper function from log.c in the fixup code, so let's move it to misc.h. IOW, this is a preparation to the following free space fixup changes. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-02UBIFS: do not free write-buffers when in R/O modeArtem Bityutskiy
Currently UBIFS has a small optimization - it frees write-buffers when it is re-mounted from R/W mode to R/O mode. Of course, when it is mounted R/O, it does not allocate write-buffers as well. This optimization is nice but it leads to subtle problems and complications in recovery, which I can reproduce using the integck test. The symptoms are that after a power cut the file-system cannot be mounted if we first mount it R/O, and then re-mount R/W - 'ubifs_rcvry_gc_commit()' prints: UBIFS error (pid 34456): could not find an empty LEB Analysis of the problem. When mounting R/W, the reply process sets journal heads to buds [1], but when mounting R/O - it does not do this, because the write-buffers are not allocated. So 'ubifs_rcvry_gc_commit()' works completely differently for the same file-system but for the following 2 cases: 1. mounting R/W after a power cut and recover 2. mounting R/O after a power cut, re-mounting R/W and run deferred recovery In the former case, we have journal heads seeked to the a bud, in the latter case, they are non-seeked (wbuf->lnum == -1). So in the latter case we do not try to recover the GC LEB by garbage-collecting to the GC head, but we just try to find an empty LEB, and there may be no empty LEBs, so we just fail. On the other hand, in the former case (mount R/W), we are able to make a GC LEB (@c->gc_lnum) by garbage-collecting. Thus, let's remove this small nice optimization and always allocate write-buffers. This should not make too big difference - we have only 3 of them, each of max. write unit size, which is usually 2KiB. So this is about 6KiB of RAM for the typical case, and only when mounted R/O. [1]: Note, currently the replay process is setting (seeking) the journal heads to _some_ buds, not necessarily to the buds which had been the journal heads before the power cut happened. This will be fixed separately. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
2010-09-19UBIFS: introduce new flags for RO mountsArtem Bityutskiy
Commit 2fde99cb55fb9d9b88180512a5e8a5d939d27fec "UBIFS: mark VFS SB RO too" introduced regression. This commit made UBIFS set the 'MS_RDONLY' flag in the VFS superblock when it switches to R/O mode due to an error. This was done to make VFS show the R/O UBIFS flag in /proc/mounts. However, several places in UBIFS relied on the 'MS_RDONLY' flag and assume this flag can only change when we re-mount. For example, 'ubifs_put_super()'. This patch introduces new UBIFS flag - 'c->ro_mount' which changes only when we re-mount, and preserves the way UBIFS was originally mounted (R/W or R/O). This allows us to de-initialize UBIFS cleanly in 'ubifs_put_super()'. This patch also changes all 'ubifs_assert(!c->ro_media)' assertions to 'ubifs_assert(!c->ro_media && !c->ro_mount)', because we never should write anything if the FS was mounter R/O. All the places where we test for 'MS_RDONLY' flag in the VFS SB were changed and now we test the 'c->ro_mount' flag instead, because it preserves the original UBIFS mount type, unlike the 'MS_RDONLY' flag. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-09-17UBIFS: introduce new flag for RO due to errorsArtem Bityutskiy
The R/O state may have various reasons: 1. The UBI volume is R/O 2. The FS is mounted R/O 3. The FS switched to R/O mode because of an error However, in UBIFS we have only one variable which represents cases 1 and 3 - 'c->ro_media'. Indeed, we set this to 1 if we switch to R/O mode due to an error, and then we test it in many places to make sure that we stop writing as soon as the error happens. But this is very unclean. One consequence of this, for example, is that in 'ubifs_remount_fs()' we use 'c->ro_media' to check whether we are in R/O mode because on an error, and we print a message in this case. However, if we are in R/O mode because the media is R/O, our message is bogus. This patch introduces new flag - 'c->ro_error' which is set when we switch to R/O mode because of an error. It also changes all "if (c->ro_media)" checks to "if (c->ro_error)" checks, because this is what the checks actually mean. We do not need to check for 'c->ro_media' because if the UBI volume is in R/O mode, we do not allow R/W mounting, and now writes can happen. This is guaranteed by VFS. But it is good to double-check this, so this patch also adds many "ubifs_assert(!c->ro_media)" checks. In the 'ubifs_remount_fs()' function this patch makes a bit more changes - it fixes the error messages as well. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-15UBIFS: improve journal head debugging printsArtem Bityutskiy
Convert the journal head integer into the head name when printing debugging information. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-10UBIFS: do not print scary error messages needlesslyArtem Bityutskiy
At the moment UBIFS print large and scary error messages and flash dumps in case of nearly any corruption, even if it is a recoverable corruption. For example, if the master node is corrupted, ubifs_scan() prints error dumps, then UBIFS recovers just fine and goes on. This patch makes UBIFS print scary error messages only in real cases, which are not recoverable. It adds 'quiet' argument to the 'ubifs_scan()' function, so the caller may ask 'ubi_scan()' not to print error messages if the caller is able to do recovery. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
2009-03-20UBIFS: fix commentariesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-02-17UBIFS: list usage cleanupEric Sesterhenn
Trivial cleanup, list_del(); list_add{,_tail}() is equivalent to list_move{,_tail}(). Semantic patch for coccinelle can be found at www.cccmz.de/~snakebyte/list_move_tail.spatch Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13UBIFS: increment commit number earlierArtem Bityutskiy
Increment the commit number at the beginnig of the commit, instead of doing this after the commit. This is needed for further optimizations. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13UBIFS: ensure UBIFS switches to read-only on errorAdrian Hunter
UBI transparently handles write errors by automatically copying and remapping the affected eraseblock. If UBI is unable to do that, for example its pool of eraseblocks reserved for bad block handling is empty, then the error is propagated to UBIFS. UBIFS must protect the media from falling into an inconsistent state by immediately switching to read-only mode. In the case of log updates, this was not being done. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-07-15UBIFS: add new flash file systemArtem Bityutskiy
This is a new flash file system. See http://www.linux-mtd.infradead.org/doc/ubifs.html Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>