| Age | Commit message (Collapse) | Author |
|---|
|
Because on v3 inodes, di_flushiter doesn't exist. It overlaps with
zero padding in the inode, except when NREXT64=1 configurations are
in use and the zero padding is no longer padding but holds the 64
bit extent counter.
This manifests obviously on big endian platforms (e.g. s390) because
the log dinode is in host order and the overlap is the LSBs of the
extent count field. It is not noticed on little endian machines
because the overlap is at the MSB end of the extent count field and
we need to get more than 2^^48 extents in the inode before it
manifests. i.e. the heat death of the universe will occur before we
see the problem in little endian machines.
This is a zero-day issue for NREXT64=1 configuraitons on big endian
machines. Fix it by only clearing di_flushiter on v2 inodes during
recovery.
Fixes: 9b7d16e34bbe ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
cc: stable@kernel.org # 5.19+
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Discovered when trying to track down a weird recovery corruption
issue that wasn't detected at recovery time.
The specific corruption was a zero extent count field when big
extent counts are in use, and it turns out the dinode verifier
doesn't detect that specific corruption case, either. So fix it too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The "%Ld" specifier, which represents long long unsigned,
doesn't meet C language standard, and even more,
it makes people easily mistake with "%ld", which represent
long unsigned. So replace "%Ld" with "lld".
Do the same with "%Lu".
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Callers currently have to round out the size of buffers to match the
aligment constraints of log iovecs and xlog_write(). They should not
need to know this detail, so introduce a new function to calculate
the iovec length (for use in ->iop_size implementations). Also
modify xlog_finish_iovec() to round up the length to the correct
alignment so the callers don't need to do this, either.
Convert the only user - inode forks - of this alignment rounding to
use the new interface.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
This commit introduces new fields in the on-disk inode format to support
64-bit data fork extent counters and 32-bit attribute fork extent
counters. The new fields will be used only when an inode has
XFS_DIFLAG2_NREXT64 flag set. Otherwise we continue to use the regular 32-bit
data fork extent counters and 16-bit attribute fork extent counters.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
Suggested-by: Dave Chinner <dchinner@redhat.com>
|
|
This commit also prints inode fields with invalid values instead of printing
addresses of inode and buffer instances.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
Suggested-by: Dave Chinner <dchinner@redhat.com>
|
|
This commit adds the new per-inode flag XFS_DIFLAG2_NREXT64 to indicate that
an inode supports 64-bit extent counters. This flag is also enabled by default
on newly created inodes when the corresponding filesystem has large extent
counter feature bit (i.e. XFS_FEAT_NREXT64) set.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
Convert the xfs_sb_version_hasfoo() to checks against
mp->m_features. Checks of the superblock itself during disk
operations (e.g. in the read/write verifiers and the to/from disk
formatters) are not converted - they operate purely on the
superblock state. Everything else should use the mount features.
Large parts of this conversion were done with sed with commands like
this:
for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do
sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f
done
With manual cleanups for things like "xfs_has_extflgbit" and other
little inconsistencies in naming.
The result is ia lot less typing to check features and an XFS binary
size reduced by a bit over 3kB:
$ size -t fs/xfs/built-in.a
text data bss dec hex filenam
before 1130866 311352 484 1442702 16038e (TOTALS)
after 1127727 311352 484 1439563 15f74b (TOTALS)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When we log an inode, we format the "log inode" core and set an LSN
in that inode core. We do that via xfs_inode_item_format_core(),
which calls:
xfs_inode_to_log_dinode(ip, dic, ip->i_itemp->ili_item.li_lsn);
to format the log inode. It writes the LSN from the inode item into
the log inode, and if recovery decides the inode item needs to be
replayed, it recovers the log inode LSN field and writes it into the
on disk inode LSN field.
Now this might seem like a reasonable thing to do, but it is wrong
on multiple levels. Firstly, if the item is not yet in the AIL,
item->li_lsn is zero. i.e. the first time the inode it is logged and
formatted, the LSN we write into the log inode will be zero. If we
only log it once, recovery will run and can write this zero LSN into
the inode.
This means that the next time the inode is logged and log recovery
runs, it will *always* replay changes to the inode regardless of
whether the inode is newer on disk than the version in the log and
that violates the entire purpose of recording the LSN in the inode
at writeback time (i.e. to stop it going backwards in time on disk
during recovery).
Secondly, if we commit the CIL to the journal so the inode item
moves to the AIL, and then relog the inode, the LSN that gets
stamped into the log inode will be the LSN of the inode's current
location in the AIL, not it's age on disk. And it's not the LSN that
will be associated with the current change. That means when log
recovery replays this inode item, the LSN that ends up on disk is
the LSN for the previous changes in the log, not the current
changes being replayed. IOWs, after recovery the LSN on disk is not
in sync with the LSN of the modifications that were replayed into
the inode. This, again, violates the recovery ordering semantics
that on-disk writeback LSNs provide.
Hence the inode LSN in the log dinode is -always- invalid.
Thirdly, recovery actually has the LSN of the log transaction it is
replaying right at hand - it uses it to determine if it should
replay the inode by comparing it to the on-disk inode's LSN. But it
doesn't use that LSN to stamp the LSN into the inode which will be
written back when the transaction is fully replayed. It uses the one
in the log dinode, which we know is always going to be incorrect.
Looking back at the change history, the inode logging was broken by
commit 93f958f9c41f ("xfs: cull unnecessary icdinode fields") way
back in 2016 by a stupid idiot who thought he knew how this code
worked. i.e. me. That commit replaced an in memory di_lsn field that
was updated only at inode writeback time from the inode item.li_lsn
value - and hence always contained the same LSN that appeared in the
on-disk inode - with a read of the inode item LSN at inode format
time. CLearly these are not the same thing.
Before 93f958f9c41f, the log recovery behaviour was irrelevant,
because the LSN in the log inode always matched the on-disk LSN at
the time the inode was logged, hence recovery of the transaction
would never make the on-disk LSN in the inode go backwards or get
out of sync.
A symptom of the problem is this, caught from a failure of
generic/482. Before log recovery, the inode has been allocated but
never used:
xfs_db> inode 393388
xfs_db> p
core.magic = 0x494e
core.mode = 0
....
v3.crc = 0x99126961 (correct)
v3.change_count = 0
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jan 1 10:00:00 1970
v3.crtime.nsec = 0
After log recovery:
xfs_db> p
core.magic = 0x494e
core.mode = 020444
....
v3.crc = 0x23e68f23 (correct)
v3.change_count = 2
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jul 22 17:03:03 2021
v3.crtime.nsec = 751000000
...
You can see that the LSN of the on-disk inode is 0, even though it
clearly has been written to disk. I point out this inode, because
the generic/482 failure occurred because several adjacent inodes in
this specific inode cluster were not replayed correctly and still
appeared to be zero on disk when all the other metadata (inobt,
finobt, directories, etc) indicated they should be allocated and
written back.
The fix for this is two-fold. The first is that we need to either
revert the LSN changes in 93f958f9c41f or stop logging the inode LSN
altogether. If we do the former, log recovery does not need to
change but we add 8 bytes of memory per inode to store what is
largely a write-only inode field. If we do the latter, log recovery
needs to stamp the on-disk inode in the same manner that inode
writeback does.
I prefer the latter, because we shouldn't really be trying to log
and replay changes to the on disk LSN as the on-disk value is the
canonical source of the on-disk version of the inode. It also
matches the way we recover buffer items - we create a buf_log_item
that carries the current recovery transaction LSN that gets stamped
into the buffer by the write verifier when it gets written back
when the transaction is fully recovered.
However, this might break log recovery on older kernels even more,
so I'm going to simply ignore the logged value in recovery and stamp
the on-disk inode with the LSN of the transaction being recovered
that will trigger writeback on transaction recovery completion. This
will ensure that the on-disk inode LSN always reflects the LSN of
the last change that was written to disk, regardless of whether it
comes from log recovery or runtime writeback.
Fixes: 93f958f9c41f ("xfs: cull unnecessary icdinode fields")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Rename struct xfs_legacy_ictimestamp to struct xfs_log_legacy_timestamp
as it is a type used for logging timestamps with no relationship to the
in-core inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Rename xfs_ictimestamp_t to xfs_log_timestamp_t as it is a type used
for logging timestamps with no relationship to the in-core inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Redesign the ondisk inode timestamps to be a simple unsigned 64-bit
counter of nanoseconds since 14 Dec 1901 (i.e. the minimum time in the
32-bit unix time epoch). This enables us to handle dates up to 2486,
which solves the y2038 problem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Redefine xfs_ictimestamp_t as a uint64_t typedef in preparation for the
bigtime functionality. Preserve the legacy structure format so that we
can let the compiler take care of the masking and shifting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Redefine xfs_timestamp_t as a __be64 typedef in preparation for the
bigtime functionality. Preserve the legacy structure format so that we
can let the compiler take care of masking and shifting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Move this function to xfs_inode_item_recover.c since there's only one
caller of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Log recovery has it's own buffer write completion handler for
buffers that it directly recovers. Convert these to direct calls by
flagging these buffers as being log recovery buffers. The flag will
get cleared by the log recovery IO completion routine, so it will
never leak out of log recovery.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Call the data/attr local fork verifiers as soon as we are ready for them.
This keeps them close to the code setting up the forks, and avoids a
few branches later on. Also open code xfs_inode_verify_forks in the
only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We always need to fill out the fork structures when reading the inode,
so call xfs_iformat_fork from the tail of xfs_inode_from_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the log inode item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the pass2 readhead code into the per-item source code files and use
the dispatch function to call them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create a generic dispatch structure to delegate recovery of different
log item types into various code modules. This will enable us to move
code specific to a particular log item type out of xfs_log_recover.c and
into the log item source.
The first operation we virtualize is the log item sorting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
