| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fix from Namjae Jeon:
- Use updated exfat_chain directly instead of snapshot values in
rename.
* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: use updated exfat_chain directly during renaming
|
|
Pull cifs client fixes from Steve French:
"Fixes addressing important multichannel, and reconnect issues.
Multichannel mounts when the server network interfaces changed, or ip
addresses changed, uncovered problems, especially in reconnect, but
the patches for this were held up until recently due to some lock
conflicts that are now addressed.
Included in this set of fixes:
- three fixes relating to multichannel reconnect, dynamically
adjusting the list of server interfaces to avoid problems during
reconnect
- a lock conflict fix related to the above
- two important fixes for negotiate on secondary channels (null
netname can unintentionally cause multichannel to be disabled to
some servers)
- a reconnect fix (reporting incorrect IP address in some cases)"
* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs_ses::ip_addr after failover
cifs: avoid deadlocks while updating iface
cifs: periodically query network interfaces from server
cifs: during reconnect, update interface if necessary
cifs: change iface_list from array to sorted linked list
smb3: use netname when available on secondary channels
smb3: fix empty netname context on secondary channels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Some urgent fixes to avoid generating corrupted inodes caused by
compressed and inline_data files.
In addition, avoid a wrong error report which prevents a roll-forward
recovery"
* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: do not count ENOENT for error case
f2fs: fix iostat related lock protection
f2fs: attach inline_data after setting compression
|
|
cifs_ses::ip_addr wasn't being updated in cifs_session_setup() when
reconnecting SMB sessions thus returning wrong value in
/proc/fs/cifs/DebugData.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 5.19 release. All are fixing
issues that either happened in this release, or going to stable.
In detail:
- A small series of fixlets for the poll handling, all destined for
stable (Pavel)
- Fix a merge error from myself that caused a potential -EINVAL for
the recv/recvmsg flag setting (me)
- Fix a kbuf recycling issue for partial IO (me)
- Use the original request for the inflight tracking (me)
- Fix an issue introduced this merge window with trace points using a
custom decoder function, which won't work for perf (Dylan)"
* tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
io_uring: use original request task for inflight tracking
io_uring: move io_uring_get_opcode out of TP_printk
io_uring: fix double poll leak on repolling
io_uring: fix wrong arm_poll error handling
io_uring: fail links when poll fails
io_uring: fix req->apoll_events
io_uring: fix merge error in checking send/recv addr2 flags
io_uring: mark reissue requests with REQ_F_PARTIAL_IO
|
|
We use cifs_tcp_ses_lock to protect a lot of things.
Not only does it protect the lists of connections, sessions,
tree connects, open file lists, etc., we also use it to
protect some fields in each of it's entries.
In this case, cifs_mark_ses_for_reconnect takes the
cifs_tcp_ses_lock to traverse the lists, and then calls
cifs_update_iface. However, that can end up calling
cifs_put_tcp_session, which picks up the same lock again.
Avoid this by taking a ref for the session, drop the lock,
and then call update iface.
Also, in cifs_update_iface, avoid nested locking of iface_lock
and chan_lock, as much as possible. When unavoidable, we need
to pick iface_lock first.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for NULL in kretprobe_dispatcher()
NULL can now be passed in, make sure it can handle it
- Clean up unneeded #endif #ifdef of the same preprocessor
check in the middle of the block.
- Comment clean up
- Remove unneeded initialization of the "ret" variable in
__trace_uprobe_create()
* tag 'trace-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobes: Remove unwanted initialization in __trace_uprobe_create()
tracefs: Fix syntax errors in comments
tracing: Simplify conditional compilation code in tracing_set_tracer()
tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher()
|
|
In prior kernels, we did file assignment always at prep time. This meant
that req->task == current. But after deferring that assignment and then
pushing the inflight tracking back in, we've got the inflight tracking
using current when it should in fact now be using req->task.
Fixup that error introduced by adding the inflight tracking back after
file assignments got modifed.
Fixes: 9cae36a094e7 ("io_uring: reinstate the inflight tracking")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, we only query the server for network interfaces
information at the time of mount, and never afterwards.
This can be a problem, especially for services like Azure,
where the IP address of the channel endpoints can change
over time.
With this change, we schedule a 600s polling of this info
from the server for each tree connect.
An alternative for periodic polling was to do this only at
the time of reconnect. But this could delay the reconnect
time slightly. Also, there are some challenges w.r.t how
we have cifs_reconnect implemented today.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Going forward, the plan is to periodically query the server
for it's interfaces (when multichannel is enabled).
This change allows checking for inactive interfaces during
reconnect, and reconnect to a new interface if necessary.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A server's published interface list can change over time, and needs
to be updated. We've storing iface_list as a simple array, which
makes it difficult to manipulate an existing list.
With this change, iface_list is modified into a linked list of
interfaces, which is kept sorted by speed.
Also added a reference counter for an iface entry, so that each
channel can maintain a backpointer to the iface and drop it
easily when needed.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some servers do not allow null netname contexts, which would cause
multichannel to revert to single channel when mounting to some
servers (e.g. Azure xSMB). The previous patch fixed that by avoiding
incorrectly sending the netname context when there would be a null
hostname sent in the netname context, while this patch fixes the null
hostname for the secondary channel by using the hostname of the
primary channel for the secondary channel.
Fixes: 4c14d7043fede ("cifs: populate empty hostnames for extra channels")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull 9pfs fixes from Dominique Martinet:
"A couple of fid refcount and fscache fixes:
- fid refcounting was incorrect in some corner cases and would leak
resources, only freed at umount time. The first three commits fix
three such cases
- 'cache=loose' or fscache was broken when trying to write a partial
page to a file with no read permission since the rework a few
releases ago.
The fix taken here is just to restore old behavior of using the
special 'writeback_fid' for such reads, which is open as root/RDWR
and such not get complains that we try to read on a WRONLY fid.
Long-term it'd be nice to get rid of this and not issue the read at
all (skip cache?) in such cases, but that direction hasn't
progressed"
* tag '9p-for-5.19-rc4' of https://github.com/martinetd/linux:
9p: fix EBADF errors in cached mode
9p: Fix refcounting during full path walks for fid lookups
9p: fix fid refcount leak in v9fs_vfs_get_link
9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
|
|
We have re-polling for partial IO, so a request can be polled twice. If
it used two poll entries the first time then on the second
io_arm_poll_handler() it will find the old apoll entry and NULL
kmalloc()'ed second entry, i.e. apoll->double_poll, so leaking it.
Fixes: 10c873334feba ("io_uring: allow re-poll if we made progress")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fee2452494222ecc7f1f88c8fb659baef971414a.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Leaving ip.error set when a request was punted to task_work execution is
problematic, don't forget to clear it.
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6c84ef4182c6962380aebe11b35bdcb25b0ccfb.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't forget to cancel all linked requests of poll request when
__io_arm_poll_handler() failed.
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a78aad962460f9fdfe4aa4c0b62425c88f9415bc.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- print more error messages for invalid mount option values
- prevent remount with v1 space cache for subpage filesystem
- fix hang during unmount when block group reclaim task is running
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add error messages to all unrecognized mount options
btrfs: prevent remounting to v1 space cache for subpage mount
btrfs: fix hang during unmount when block group reclaim task is running
|
|
The recent patch to make afs_getattr consult the server didn't account
for the pseudo-inodes employed by the dynamic root-type afs superblock
not having a volume or a server to access, and thus an oops occurs if
such a directory is stat'd.
Fix this by checking to see if the vnode->volume pointer actually points
anywhere before following it in afs_getattr().
This can be tested by stat'ing a directory in /afs. It may be
sufficient just to do "ls /afs" and the oops looks something like:
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:afs_getattr+0x8b/0x14b
...
Call Trace:
<TASK>
vfs_statx+0x79/0xf5
vfs_fstatat+0x49/0x62
Fixes: 2aeb8c86d499 ("afs: Fix afs_getattr() to refetch file status if callback break occurred")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Otherwise, we can get a wrong cp_error mark.
Cc: <stable@vger.kernel.org>
Fixes: a7b8618aa2f0 ("f2fs: avoid infinite loop to flush node pages")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
apoll_events should be set once in the beginning of poll arming just as
poll->events and not change after. However, currently io_uring resets it
on each __io_poll_execute() for no clear reason. There is also a place
in __io_arm_poll_handler() where we add EPOLLONESHOT to downgrade a
multishot, but forget to do the same thing with ->apoll_events, which is
buggy.
Fixes: 81459350d581e ("io_uring: cache req->apoll->events in req->cflags")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Link: https://lore.kernel.org/r/0aef40399ba75b1a4d2c2e85e6e8fd93c02fc6e4.1655814213.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the dropping of the IOPOLL checking in the per-opcode handlers,
we inadvertently left two checks in the recv/recvmsg and send/sendmsg
prep handlers for the same thing, and one of them includes addr2 which
holds the flags for these opcodes.
Fix it up and kill the redundant checks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We are hitting the following deadlock in production occasionally
Task 1 Task 2 Task 3 Task 4 Task 5
fsync(A)
start trans
start commit
falloc(A)
lock 5m-10m
start trans
wait for commit
fiemap(A)
lock 0-10m
wait for 5m-10m
(have 0-5m locked)
have btrfs_need_log_full_commit
!full_sync
wait_ordered_extents
finish_ordered_io(A)
lock 0-5m
DEADLOCK
We have an existing dependency of file extent lock -> transaction.
However in fsync if we tried to do the fast logging, but then had to
fall back to committing the transaction, we will be forced to call
btrfs_wait_ordered_range() to make sure all of our extents are updated.
This creates a dependency of transaction -> file extent lock, because
btrfs_finish_ordered_io() will need to take the file extent lock in
order to run the ordered extents.
Fix this by stopping the transaction if we have to do the full commit
and we attempted to do the fast logging. Then attach to the transaction
and commit it if we need to.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In 196d59ab9ccc "btrfs: switch extent buffer tree lock to rw_semaphore"
the functions for tree read locking were rewritten, and in the process
the read lock functions started setting eb->lock_owner = current->pid.
Previously lock_owner was only set in tree write lock functions.
Read locks are shared, so they don't have exclusive ownership of the
underlying object, so setting lock_owner to any single value for a
read lock makes no sense. It's mostly harmless because write locks
and read locks are mutually exclusive, and none of the existing code
in btrfs (btrfs_init_new_buffer and print_eb_refs_lock) cares what
nonsense is written in lock_owner when no writer is holding the lock.
KCSAN does care, and will complain about the data race incessantly.
Remove the assignments in the read lock functions because they're
useless noise.
Fixes: 196d59ab9ccc ("btrfs: switch extent buffer tree lock to rw_semaphore")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We use btrfs_zoned_data_reloc_{lock,unlock} to allow only one process to
write out to the relocation inode. That critical section must include all
the IO submission for the inode. However, flush_write_bio() in
extent_writepages() is out of the critical section, causing an IO
submission outside of the lock. This leads to an out of the order IO
submission and fail the relocation process.
Fix it by extending the critical section.
Fixes: 35156d852762 ("btrfs: zoned: only allow one process to add pages to a relocation inode")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After commit 5f0addf7b890 ("btrfs: zoned: use dedicated lock for data
relocation"), we observe IO errors on e.g, btrfs/232 like below.
[09.0][T4038707] WARNING: CPU: 3 PID: 4038707 at fs/btrfs/extent-tree.c:2381 btrfs_cross_ref_exist+0xfc/0x120 [btrfs]
<snip>
[09.9][T4038707] Call Trace:
[09.5][T4038707] <TASK>
[09.3][T4038707] run_delalloc_nocow+0x7f1/0x11a0 [btrfs]
[09.6][T4038707] ? test_range_bit+0x174/0x320 [btrfs]
[09.2][T4038707] ? fallback_to_cow+0x980/0x980 [btrfs]
[09.3][T4038707] ? find_lock_delalloc_range+0x33e/0x3e0 [btrfs]
[09.5][T4038707] btrfs_run_delalloc_range+0x445/0x1320 [btrfs]
[09.2][T4038707] ? test_range_bit+0x320/0x320 [btrfs]
[09.4][T4038707] ? lock_downgrade+0x6a0/0x6a0
[09.2][T4038707] ? orc_find.part.0+0x1ed/0x300
[09.5][T4038707] ? __module_address.part.0+0x25/0x300
[09.0][T4038707] writepage_delalloc+0x159/0x310 [btrfs]
<snip>
[09.4][ C3] sd 10:0:1:0: [sde] tag#2620 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[09.5][ C3] sd 10:0:1:0: [sde] tag#2620 Sense Key : Illegal Request [current]
[09.9][ C3] sd 10:0:1:0: [sde] tag#2620 Add. Sense: Unaligned write command
[09.5][ C3] sd 10:0:1:0: [sde] tag#2620 CDB: Write(16) 8a 00 00 00 00 00 02 f3 63 87 00 00 00 2c 00 00
[09.4][ C3] critical target error, dev sde, sector 396041272 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0
[09.9][ C3] BTRFS error (device dm-1): bdev /dev/mapper/dml_102_2 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
The IO errors occur when we allocate a regular extent in previous data
relocation block group.
On zoned btrfs, we use a dedicated block group to relocate a data
extent. Thus, we allocate relocating data extents (pre-alloc) only from
the dedicated block group and vice versa. Once the free space in the
dedicated block group gets tight, a relocating extent may not fit into
the block group. In that case, we need to switch the dedicated block
group to the next one. Then, the previous one is now freed up for
allocating a regular extent. The BG is already not enough to allocate
the relocating extent, but there is still room to allocate a smaller
extent. Now the problem happens. By allocating a regular extent while
nocow IOs for the relocation is still on-going, we will issue WRITE IOs
(for relocation) and ZONE APPEND IOs (for the regular writes) at the
same time. That mixed IOs confuses the write pointer and arises the
unaligned write errors.
This commit introduces a new bit 'zoned_data_reloc_ongoing' to the
btrfs_block_group. We set this bit before releasing the dedicated block
group, and no extent are allocated from a block group having this bit
set. This bit is similar to setting block_group->ro, but is different from
it by allowing nocow writes to start.
Once all the nocow IO for relocation is done (hooked from
btrfs_finish_ordered_io), we reset the bit to release the block group for
further allocation.
Fixes: c2707a255623 ("btrfs: zoned: add a dedicated data relocation block group")
CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_replace_file_extents(), if we fail to migrate reserved metadata
space from the transaction block reserve into the local block reserve,
we trigger a BUG_ON(). This is because it should not be possible to have
a failure here, as we reserved more space when we started the transaction
than the space we want to migrate. However having a BUG_ON() is way too
drastic, we can perfectly handle the failure and return the error to the
caller. So just do that instead, and add a WARN_ON() to make it easier
to notice the failure if it ever happens (which is particularly useful
for fstests, and the warning will trigger a failure of a test case).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When replacing file extents, called during fallocate, hole punching,
clone and deduplication, we may not be able to replace/drop all the
target file extent items with a single transaction handle. We may get
-ENOSPC while doing it, in which case we release the transaction handle,
balance the dirty pages of the btree inode, flush delayed items and get
a new transaction handle to operate on what's left of the target range.
By dropping and replacing file extent items we have effectively modified
the inode, so we should bump its iversion and update its mtime/ctime
before we update the inode item. This is because if the transaction
we used for partially modifying the inode gets committed by someone after
we release it and before we finish the rest of the range, a power failure
happens, then after mounting the filesystem our inode has an outdated
iversion and mtime/ctime, corresponding to the values it had before we
changed it.
So add the missing iversion and mtime/ctime updates.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While doing a reflink operation, if an ordered extent for a file range
that does not overlap with the source and destination ranges of the
reflink operation happens, we can end up having a failure in the reflink
operation and return -EINVAL to user space.
The following sequence of steps explains how this can happen:
1) We have the page at file offset 315392 dirty (under delalloc);
2) A reflink operation for this file starts, using the same file as both
source and destination, the source range is [372736, 409600) (length of
36864 bytes) and the destination range is [208896, 245760);
3) At btrfs_remap_file_range_prep(), we flush all delalloc in the source
and destination ranges, and wait for any ordered extents in those range
to complete;
4) Still at btrfs_remap_file_range_prep(), we then flush all delalloc in
the inode, but we neither wait for it to complete nor any ordered
extents to complete. This results in starting delalloc for the page at
file offset 315392 and creating an ordered extent for that single page
range;
5) We then move to btrfs_clone() and enter the loop to find file extent
items to copy from the source range to destination range;
6) In the first iteration we end up at last file extent item stored in
leaf A:
(...)
item 131 key (143616 108 315392) itemoff 5101 itemsize 53
extent data disk bytenr 1903988736 nr 73728
extent data offset 12288 nr 61440 ram 73728
This represents the file range [315392, 376832), which overlaps with
the source range to clone.
@datal is set to 61440, key.offset is 315392 and @next_key_min_offset
is therefore set to 376832 (315392 + 61440).
@off (372736) is > key.offset (315392), so @new_key.offset is set to
the value of @destoff (208896).
@new_key.offset == @last_dest_end (208896) so @drop_start is set to
208896 (@new_key.offset).
@datal is adjusted to 4096, as @off is > @key.offset.
So in this iteration we call btrfs_replace_file_extents() for the range
[208896, 212991] (a single page, which is
[@drop_start, @new_key.offset + @datal - 1]).
@last_dest_end is set to 212992 (@new_key.offset + @datal =
208896 + 4096 = 212992).
Before the next iteration of the loop, @key.offset is set to the value
376832, which is @next_key_min_offset;
7) On the second iteration btrfs_search_slot() leaves us again at leaf A,
but this time pointing beyond the last slot of leaf A, as that's where
a key with offset 376832 should be at if it existed. So end up calling
btrfs_next_leaf();
8) btrfs_next_leaf() releases the path, but before it searches again the
tree for the next key/leaf, the ordered extent for the single page
range at file offset 315392 completes. That results in trimming the
file extent item we processed before, adjusting its key offset from
315392 to 319488, reducing its length from 61440 to 57344 and inserting
a new file extent item for that single page range, with a key offset of
315392 and a length of 4096.
Leaf A now looks like:
(...)
item 132 key (143616 108 315392) itemoff 4995 itemsize 53
extent data disk bytenr 1801666560 nr 4096
extent data offset 0 nr 4096 ram 4096
item 133 key (143616 108 319488) itemoff 4942 itemsize 53
extent data disk bytenr 1903988736 nr 73728
extent data offset 16384 nr 57344 ram 73728
9) When btrfs_next_leaf() returns, it gives us a path pointing to leaf A
at slot 133, since it's the first key that follows what was the last
key we saw (143616 108 315392). In fact it's the same item we processed
before, but its key offset was changed, so it counts as a new key;
10) So now we have:
@key.offset == 319488
@datal == 57344
@off (372736) is > key.offset (319488), so @new_key.offset is set to
208896 (@destoff value).
@new_key.offset (208896) != @last_dest_end (212992), so @drop_start
is set to 212992 (@last_dest_end value).
@datal is adjusted to 4096 because @off > @key.offset.
So in this iteration we call btrfs_replace_file_extents() for the
invalid range of [212992, 212991] (which is
[@drop_start, @new_key.offset + @datal - 1]).
This range is empty, the end offset is smaller than the start offset
so btrfs_replace_file_extents() returns -EINVAL, which we end up
returning to user space and fail the reflink operation.
This all happens because the range of this file extent item was
already processed in the previous iteration.
This scenario can be triggered very sporadically by fsx from fstests, for
example with test case generic/522.
So fix this by having btrfs_clone() skip file extent items that cover a
file range that we have already processed.
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Some servers do not allow null netname contexts, which would cause
multichannel to revert to single channel when mounting to some
servers (e.g. Azure xSMB).
Fixes: 4c14d7043fede ("cifs: populate empty hostnames for extra channels")
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If we mark for reissue, we assume that the buffer will remain stable.
Hence if are using a provided buffer, we need to ensure that we stick
with it for the duration of that request.
This only affects block devices that use provided buffers, as those are
the only ones that get marked with REQ_F_REISSUE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Made iostat related locks safe to be called from irq context again.
Cc: <stable@vger.kernel.org>
Fixes: a1e09b03e6f5 ("f2fs: use iomap for direct I/O")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Eddie Huang <eddie.huang@mediatek.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This fixes the below corruption.
[345393.335389] F2FS-fs (vdb): sanity_check_inode: inode (ino=6d0, mode=33206) should not have inline_data, run fsck to fix
Cc: <stable@vger.kernel.org>
Fixes: 677a82b44ebf ("f2fs: fix to do sanity check for inline inode")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Pull xfs fixes from Darrick Wong:
"There's not a whole lot this time around (I'm still on vacation) but
here are some important fixes for new features merged in -rc1:
- Fix a bug where inode flag changes would accidentally drop nrext64
- Fix a race condition when toggling LARP mode"
* tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: preserve DIFLAG2_NREXT64 when setting other inode attributes
xfs: fix variable state usage
xfs: fix TOCTOU race involving the new logged xattrs control knob
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
|
|
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
|
|
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220605091503.12513-1-wangxiang@cdjrlc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Fixes: 46c116b920eb ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Fixes: cebe85d570cf ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Replace kmalloc + memcpy with kmemdup()
Signed-off-by: Shuqi Zhang <zhangshuqi3@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525030120.803330-1-zhangshuqi3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We got issue as follows:
[home]# mount /dev/sda test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock! Retrying...
Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.
To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Delete the redundant word 'to'.
Link: https://lkml.kernel.org/r/20220605092729.13010-1-wangxiang@cdjrlc.com
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull NFS client fixes from Anna Schumaker:
- Add FMODE_CAN_ODIRECT support to NFSv4 so opens don't fail
- Fix trunking detection & cl_max_connect setting
- Avoid pnfs_update_layout() livelocks
- Don't keep retrying pNFS if the server replies with NFS4ERR_UNAVAILABLE
* tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Add FMODE_CAN_ODIRECT after successful open of a NFS4.x file
sunrpc: set cl_max_connect when cloning an rpc_clnt
pNFS: Avoid a live lock condition in pnfs_update_layout()
pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
|
|
Pull io_uring fixes from Jens Axboe:
"Bigger than usual at this time, both because we missed -rc2, but also
because of some reverts that we chose to do. In detail:
- Adjust mapped buffer API while we still can (Dylan)
- Mapped buffer fixes (Dylan, Hao, Pavel, me)
- Fix for uring_cmd wrong API usage for task_work (Dylan)
- Fix for bug introduced in fixed file closing (Hao)
- Fix race in buffer/file resource handling (Pavel)
- Revert the NOP support for CQE32 and buffer selection that was
brought up during the merge window (Pavel)
- Remove IORING_CLOSE_FD_AND_FILE_SLOT introduced in this merge
window. The API needs further refining, so just yank it for now and
we'll revisit for a later kernel.
- Series cleaning up the CQE32 support added in this merge window,
making it more integrated rather than sitting on the side (Pavel)"
* tag 'io_uring-5.19-2022-06-16' of git://git.kernel.dk/linux-block: (21 commits)
io_uring: recycle provided buffer if we punt to io-wq
io_uring: do not use prio task_work_add in uring_cmd
io_uring: commit non-pollable provided mapped buffers upfront
io_uring: make io_fill_cqe_aux honour CQE32
io_uring: remove __io_fill_cqe() helper
io_uring: fix ->extra{1,2} misuse
io_uring: fill extra big cqe fields from req
io_uring: unite fill_cqe and the 32B version
io_uring: get rid of __io_fill_cqe{32}_req()
io_uring: remove IORING_CLOSE_FD_AND_FILE_SLOT
Revert "io_uring: add buffer selection support to IORING_OP_NOP"
Revert "io_uring: support CQE32 for nop operation"
io_uring: limit size of provided buffer ring
io_uring: fix types in provided buffer ring
io_uring: fix index calculation
io_uring: fix double unlock for pbuf select
io_uring: kbuf: fix bug of not consuming ring buffer in partial io case
io_uring: openclose: fix bug of closing wrong fixed file
io_uring: fix not locked access to fixed buf table
io_uring: fix races with buffer table unregister
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback and ext2 fixes from Jan Kara:
"A fix for writeback bug which prevented machines with kdevtmpfs from
booting and also one small ext2 bugfix in IO error handling"
* tag 'fs_for_v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
init: Initialize noop_backing_dev_info early
ext2: fix fs corruption when trying to remove a non-empty directory with IO error
|
