summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2020-10-02Merge tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: - fix for async buffered reads if read-ahead is fully disabled (Hao) - double poll match fix - ->show_fdinfo() potential ABBA deadlock complaint fix * tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-block: io_uring: fix async buffered reads when readahead is disabled io_uring: fix potential ABBA deadlock in ->show_fdinfo() io_uring: always delete double poll wait entry on match
2020-10-02Merge branch 'work.epoll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull epoll fixes from Al Viro: "Several race fixes in epoll" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ep_create_wakeup_source(): dentry name can change under you... epoll: EPOLL_CTL_ADD: close the race in decision to take fast path epoll: replace ->visited/visited_list with generation count epoll: do not insert into poll queues until all sanity checks are done
2020-10-02Merge tag 'for-5.9-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two more fixes. One is for a lockdep warning/lockup (also caught by syzbot), that one has been seen in practice. Regarding the other syzbot reports mentioned last time, they don't seem to be urgent and reliably reproducible so they'll be fixed later. The second fix is for a potential corruption when device replace finishes and the in-memory state of trim is not copied to the new device" * tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix filesystem corruption after a device replace btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishing
2020-10-01pipe: remove pipe_wait() and fix wakeup race with spliceLinus Torvalds
The pipe splice code still used the old model of waiting for pipe IO by using a non-specific "pipe_wait()" that waited for any pipe event to happen, which depended on all pipe IO being entirely serialized by the pipe lock. So by checking the state you were waiting for, and then adding yourself to the wait queue before dropping the lock, you were guaranteed to see all the wakeups. Strictly speaking, the actual wakeups were not done under the lock, but the pipe_wait() model still worked, because since the waiter held the lock when checking whether it should sleep, it would always see the current state, and the wakeup was always done after updating the state. However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") split the single wait-queue into two, and in the process also made the "wait for event" code wait for _two_ wait queues, and that then showed a race with the wakers that were not serialized by the pipe lock. It's only splice that used that "pipe_wait()" model, so the problem wasn't obvious, but Josef Bacik reports: "I hit a hang with fstest btrfs/187, which does a btrfs send into /dev/null. This works by creating a pipe, the write side is given to the kernel to write into, and the read side is handed to a thread that splices into a file, in this case /dev/null. The box that was hung had the write side stuck here [pipe_write] and the read side stuck here [splice_from_pipe_next -> pipe_wait]. [ more details about pipe_wait() scenario ] The problem is we're doing the prepare_to_wait, which sets our state each time, however we can be woken up either with reads or writes. In the case above we race with the WRITER waking us up, and re-set our state to INTERRUPTIBLE, and thus never break out of schedule" Josef had a patch that avoided the issue in pipe_wait() by just making it set the state only once, but the deeper problem is that pipe_wait() depends on a level of synchonization by the pipe mutex that it really shouldn't. And the whole "wait for any pipe state change" model really isn't very good to begin with. So rather than trying to work around things in pipe_wait(), remove that legacy model of "wait for arbitrary pipe event" entirely, and actually create functions that wait for the pipe actually being readable or writable, and can do so without depending on the pipe lock serializing everything. Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/ Reported-by: Josef Bacik <josef@toxicpanda.com> Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-30btrfs: fix filesystem corruption after a device replaceFilipe Manana
We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-30btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locksJosef Bacik
When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. There's a report from syzbot probably hitting one of the cases where the bd_mutex and device_list_mutex are taken in the wrong order, however it's not with device replace, like this patch fixes. As there's no reproducer available so far, we can't verify the fix. https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/ dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419 WARNING: possible circular locking dependency detected 5.9.0-rc5-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.0/6878 is trying to acquire lock: ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804 but task is already holding lock: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline] find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #3 (sb_internal#2){.+.+}-{0:0}: percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x234/0x470 fs/super.c:1672 sb_start_intwrite include/linux/fs.h:1690 [inline] start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline] find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __flush_work+0x60e/0xac0 kernel/workqueue.c:3041 wb_shutdown+0x180/0x220 mm/backing-dev.c:355 bdi_unregister+0x174/0x590 mm/backing-dev.c:872 del_gendisk+0x820/0xa10 block/genhd.c:933 loop_remove drivers/block/loop.c:2192 [inline] loop_control_ioctl drivers/block/loop.c:2291 [inline] loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 lo_open+0x19/0xd0 drivers/block/loop.c:1893 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507 blkdev_get fs/block_dev.c:1639 [inline] blkdev_open+0x227/0x300 fs/block_dev.c:1753 do_dentry_open+0x4b9/0x11b0 fs/open.c:817 do_open fs/namei.c:3251 [inline] path_openat+0x1b9a/0x2730 fs/namei.c:3368 do_filp_open+0x17e/0x3c0 fs/namei.c:3395 do_sys_openat2+0x16d/0x420 fs/open.c:1168 do_sys_open fs/open.c:1184 [inline] __do_sys_open fs/open.c:1192 [inline] __se_sys_open fs/open.c:1188 [inline] __x64_sys_open+0x119/0x1c0 fs/open.c:1188 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&bdev->bd_mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(sb_internal#2); lock(&fs_devs->device_list_mutex); lock(&bdev->bd_mutex); *** DEADLOCK *** 3 locks held by syz-executor.0/6878: #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365 #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178 #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 stack backtrace: CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x460027 RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027 RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0 RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460 R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460 Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ add syzbot reference ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-29autofs: use __kernel_write() for the autofs pipe writingLinus Torvalds
autofs got broken in some configurations by commit 13c164b1a186 ("autofs: switch to kernel_write") because there is now an extra LSM permission check done by security_file_permission() in rw_verify_area(). autofs is one if the few places that really does want the much more limited __kernel_write(), because the write is an internal kernel one that shouldn't do any user permission checks (it also doesn't need the file_start_write/file_end_write logic, since it's just a pipe). There are a couple of other cases like that - accounting, core dumping, and splice - but autofs stands out because it can be built as a module. As a result, we need to export this internal __kernel_write() function again. We really don't want any other module to use this, but we don't have a "EXPORT_SYMBOL_FOR_AUTOFS_ONLY()". But we can mark it GPL-only to at least approximate that "internal use only" for licensing. While in this area, make autofs pass in NULL for the file position pointer, since it's always a pipe, and we now use a NULL file pointer for streaming file descriptors (see file_ppos() and commit 438ab720c675: "vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files") This effectively reverts commits 9db977522449 ("fs: unexport __kernel_write") and 13c164b1a186 ("autofs: switch to kernel_write"). Fixes: 13c164b1a186 ("autofs: switch to kernel_write") Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-29io_uring: fix async buffered reads when readahead is disabledHao Xu
The async buffered reads feature is not working when readahead is turned off. There are two things to concern: - when doing retry in io_read, not only the IOCB_WAITQ flag but also the IOCB_NOWAIT flag is still set, which makes it goes to would_block phase in generic_file_buffered_read() and then return -EAGAIN. After that, the io-wq thread work is queued, and later doing the async reads in the old way. - even if we remove IOCB_NOWAIT when doing retry, the feature is still not running properly, since in generic_file_buffered_read() it goes to lock_page_killable() after calling mapping->a_ops->readpage() to do IO, and thus causing process to sleep. Fixes: 1a0a7853b901 ("mm: support async buffered reads in generic_file_buffered_read()") Fixes: 3b2a4439e0ae ("io_uring: get rid of kiocb_wait_page_queue_init()") Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28Merge tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - NFSv4.2: copy_file_range needs to invalidate caches on success - NFSv4.2: Fix security label length not being reset - pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read - pNFS/flexfiles: Fix signed/unsigned type issues with mirror indices" * tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS/flexfiles: Be consistent about mirror index types pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read NFSv4.2: fix client's attribute cache management for copy_file_range nfs: Fix security label length not being reset
2020-09-28io_uring: fix potential ABBA deadlock in ->show_fdinfo()Jens Axboe
syzbot reports a potential lock deadlock between the normal IO path and ->show_fdinfo(): ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc6-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/19710 is trying to acquire lock: ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296 but task is already holding lock: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ctx->uring_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 __io_uring_show_fdinfo fs/io_uring.c:8417 [inline] io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460 seq_show+0x4a8/0x700 fs/proc/fd.c:65 seq_read+0x432/0x1070 fs/seq_file.c:208 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&p->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 seq_read+0x61/0x1070 fs/seq_file.c:155 pde_read fs/proc/inode.c:306 [inline] proc_reg_read+0x221/0x300 fs/proc/inode.c:318 do_loop_readv_writev fs/read_write.c:734 [inline] do_loop_readv_writev fs/read_write.c:721 [inline] do_iter_read+0x48e/0x6e0 fs/read_write.c:955 vfs_readv+0xe5/0x150 fs/read_write.c:1073 kernel_readv fs/splice.c:355 [inline] default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412 do_splice_to+0x137/0x170 fs/splice.c:871 splice_direct_to_actor+0x307/0x980 fs/splice.c:950 do_splice_direct+0x1b3/0x280 fs/splice.c:1059 do_sendfile+0x55f/0xd40 fs/read_write.c:1540 __do_sys_sendfile64 fs/read_write.c:1601 [inline] __se_sys_sendfile64 fs/read_write.c:1587 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (sb_writers#4){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: sb_writers#4 --> &p->lock --> &ctx->uring_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctx->uring_lock); lock(&p->lock); lock(&ctx->uring_lock); lock(sb_writers#4); *** DEADLOCK *** 1 lock held by syz-executor.2/19710: #0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348 stack backtrace: CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441 lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x228/0x450 fs/super.c:1672 io_write+0x6b5/0xb30 fs/io_uring.c:3296 io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719 __io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175 io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254 io_submit_sqe fs/io_uring.c:6324 [inline] io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521 __do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45e179 Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c Fix this by just not diving into details if we fail to trylock the io_uring mutex. We know the ctx isn't going away during this operation, but we cannot safely iterate buffers/files/personalities if we don't hold the io_uring mutex. Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28io_uring: always delete double poll wait entry on matchJens Axboe
syzbot reports a crash with tty polling, which is using the double poll handling: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] CPU: 0 PID: 6874 Comm: syz-executor749 Not tainted 5.9.0-rc6-next-20200924-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_poll_get_single fs/io_uring.c:4778 [inline] RIP: 0010:io_poll_double_wake+0x51/0x510 fs/io_uring.c:4845 Code: fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 9e 03 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 5d 08 48 8d 7b 48 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 63 03 00 00 0f b6 6b 48 bf 06 00 00 RSP: 0018:ffffc90001c1fb70 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000009 RSI: ffffffff81d9b3ad RDI: 0000000000000048 RBP: dffffc0000000000 R08: ffff8880a3cac798 R09: ffffc90001c1fc60 R10: fffff52000383f73 R11: 0000000000000000 R12: 0000000000000004 R13: ffff8880a3cac798 R14: ffff8880a3cac7a0 R15: 0000000000000004 FS: 0000000001f98880(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f18886916c0 CR3: 0000000094c5a000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __wake_up_common+0x147/0x650 kernel/sched/wait.c:93 __wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:123 tty_ldisc_hangup+0x1cf/0x680 drivers/tty/tty_ldisc.c:735 __tty_hangup.part.0+0x403/0x870 drivers/tty/tty_io.c:625 __tty_hangup drivers/tty/tty_io.c:575 [inline] tty_vhangup+0x1d/0x30 drivers/tty/tty_io.c:698 pty_close+0x3f5/0x550 drivers/tty/pty.c:79 tty_release+0x455/0xf60 drivers/tty/tty_io.c:1679 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:165 [inline] exit_to_user_mode_prepare+0x1e2/0x1f0 kernel/entry/common.c:192 syscall_exit_to_user_mode+0x7a/0x2c0 kernel/entry/common.c:267 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x401210 which is due to a failure in removing the double poll wait entry if we hit a wakeup match. This can cause multiple invocations of the wakeup, which isn't safe. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+81b3883093f772addf6d@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-26Merge tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two fixes for regressions in this cycle, and one that goes to 5.8 stable: - fix leak of getname() retrieved filename - remove plug->nowait assignment, fixing a regression with btrfs - fix for async buffered retry" * tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block: io_uring: ensure async buffered read-retry is setup properly io_uring: don't unconditionally set plug->nowait = true io_uring: ensure open/openat2 name is cleaned on cancelation
2020-09-25io_uring: ensure async buffered read-retry is setup properlyJens Axboe
A previous commit for fixing up short reads botched the async retry path, so we ended up going to worker threads more often than we should. Fix this up, so retries work the way they originally were intended to. Fixes: 227c0c9673d8 ("io_uring: internally retry short reads") Reported-by: Hao_Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25io_uring: don't unconditionally set plug->nowait = trueJens Axboe
This causes all the bios to be submitted with REQ_NOWAIT, which can be problematic on either btrfs or on file systems that otherwise use a mix of block devices where only some of them support it. For now, just remove the setting of plug->nowait = true. Reported-by: Dan Melnic <dmm@fb.com> Reported-by: Brian Foster <bfoster@redhat.com> Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishingJosef Bacik
We need to move the closing of the src_device out of all the device replace locking, but we definitely want to zero out the superblock before we commit the last time to make sure the device is properly removed. Handle this by pushing btrfs_scratch_superblocks into btrfs_dev_replace_finishing, and then later on we'll move the src_device closing and freeing stuff where we need it to be. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-25io_uring: ensure open/openat2 name is cleaned on cancelationJens Axboe
If we cancel these requests, we'll leak the memory associated with the filename. Add them to the table of ops that need cleaning, if REQ_F_NEED_CLEANUP is set. Cc: stable@vger.kernel.org Fixes: e62753e4e292 ("io_uring: call statx directly") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24ep_create_wakeup_source(): dentry name can change under you...Al Viro
or get freed, for that matter, if it's a long (separately stored) name. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-23Merge tag 'for-5.9-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "syzkaller started to hit us with reports, here's a fix for one type (stack overflow when printing checksums on read error). The other patch is a fix for sysfs object, we have a test for that and it leads to a crash." * tag 'for-5.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix put of uninitialized kobject after seed device delete btrfs: fix overflow when copying corrupt csums for a message
2020-09-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
2020-09-22Merge tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A few fixes - most of them regression fixes from this cycle, but also a few stable heading fixes, and a build fix for the included demo tool since some systems now actually have gettid() available" * tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block: io_uring: fix openat/openat2 unified prep handling io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL tools/io_uring: fix compile breakage io_uring: don't use retry based buffered reads for non-async bdev io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there io_uring: don't run task work on an exiting task io_uring: drop 'ctx' ref on task work cancelation io_uring: grab any needed state during defer prep
2020-09-22btrfs: fix put of uninitialized kobject after seed device deleteAnand Jain
The following test case leads to NULL kobject free error: mount seed /mnt add sprout to /mnt umount /mnt mount sprout to /mnt delete seed kobject: '(null)' (00000000dd2b87e4): is not initialized, yet kobject_put() is being called. WARNING: CPU: 1 PID: 15784 at lib/kobject.c:736 kobject_put+0x80/0x350 RIP: 0010:kobject_put+0x80/0x350 :: Call Trace: btrfs_sysfs_remove_devices_dir+0x6e/0x160 [btrfs] btrfs_rm_device.cold+0xa8/0x298 [btrfs] btrfs_ioctl+0x206c/0x22a0 [btrfs] ksys_ioctl+0xe2/0x140 __x64_sys_ioctl+0x1e/0x29 do_syscall_64+0x96/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4047c6288b :: This is because, at the end of the seed device-delete, we try to remove the seed's devid sysfs entry. But for the seed devices under the sprout fs, we don't initialize the devid kobject yet. So add a kobject state check, which takes care of the bug. Fixes: 668e48af7a94 ("btrfs: sysfs, add devid/dev_state kobject and device attributes") CC: stable@vger.kernel.org # 5.6+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-21io_uring: fix openat/openat2 unified prep handlingJens Axboe
A previous commit unified how we handle prep for these two functions, but this means that we check the allowed context (SQPOLL, specifically) later than we should. Move the ring type checking into the two parent functions, instead of doing it after we've done some setup work. Fixes: ec65fea5a8d7 ("io_uring: deduplicate io_openat{,2}_prep()") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: mark statx/files_update/epoll_ctl as non-SQPOLLJens Axboe
These will naturally fail when attempted through SQPOLL, but either with -EFAULT or -EBADF. Make it explicit that these are not workable through SQPOLL and return -EINVAL, just like other ops that need to use ->files. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: don't use retry based buffered reads for non-async bdevJens Axboe
Some block devices, like dm, bubble back -EAGAIN through the completion handler. We check for this in io_read(), but don't honor it for when we have copied the iov. Return -EAGAIN for this case before retrying, to force punt to io-wq. Fixes: bcf5a06304d6 ("io_uring: support true async buffered reads, if file provides it") Reported-by: Zorro Lang <zlang@redhat.com> Tested-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: don't re-setup vecs/iter in io_resumit_prep() is already thereJens Axboe
If we already have mapped the necessary data for retry, then don't set it up again. It's a pointless operation, and we leak the iovec if it's a large (non-stack) vec. Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21btrfs: fix overflow when copying corrupt csums for a messageJohannes Thumshirn
Syzkaller reported a buffer overflow in btree_readpage_end_io_hook() when loop mounting a crafted image: detected buffer overflow in memcpy ------------[ cut here ]------------ kernel BUG at lib/string.c:1129! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 26 Comm: kworker/u4:2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: btrfs-endio-meta btrfs_work_helper RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000557335f440d0 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: memcpy include/linux/string.h:405 [inline] btree_readpage_end_io_hook.cold+0x206/0x221 fs/btrfs/disk-io.c:642 end_bio_extent_readpage+0x4de/0x10c0 fs/btrfs/extent_io.c:2854 bio_endio+0x3cf/0x7f0 block/bio.c:1449 end_workqueue_fn+0x114/0x170 fs/btrfs/disk-io.c:1695 btrfs_work_helper+0x221/0xe20 fs/btrfs/async-thread.c:318 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: ---[ end trace b68924293169feef ]--- RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95b7c4d008 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 The overflow happens, because in btree_readpage_end_io_hook() we assume that we have found a 4 byte checksum instead of the real possible 32 bytes we have for the checksums. With the fix applied: [ 35.726623] BTRFS: device fsid 815caf9a-dc43-4d2a-ac54-764b8333d765 devid 1 transid 5 /dev/loop0 scanned by syz-repro (215) [ 35.738994] BTRFS info (device loop0): disk space caching is enabled [ 35.738998] BTRFS info (device loop0): has skinny extents [ 35.743337] BTRFS warning (device loop0): loop0 checksum verify failed on 1052672 wanted 0xf9c035fc8d239a54 found 0x67a25c14b7eabcf9 level 0 [ 35.743420] BTRFS error (device loop0): failed to read chunk root [ 35.745899] BTRFS error (device loop0): open_ctree failed Reported-by: syzbot+e864a35d361e1d4e29a5@syzkaller.appspotmail.com Fixes: d5178578bcd4 ("btrfs: directly call into crypto framework for checksumming") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-19fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match ↵Tobias Klauser
prototype Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the definition of dirtytime_interval_handler to match its prototype in linux/writeback.h which fixes the following sparse error/warning: fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces) fs/fs-writeback.c:2189:50: expected void * fs/fs-writeback.c:2189:50: got void [noderef] __user *buffer fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)): fs/fs-writeback.c:2184:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... ) fs/fs-writeback.c: note: in included file: ./include/linux/writeback.h:374:5: note: previously declared as: ./include/linux/writeback.h:374:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... ) Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-18pNFS/flexfiles: Be consistent about mirror index typesTrond Myklebust
A mirror index is always of type u32. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-09-18pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on readTrond Myklebust
While it is true that reading from an unmirrored source always uses index 0, that is no longer true for mirrored sources when we fail over. Fixes: 563c53e73b8b ("NFS: Fix flexfiles read failover") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-09-17fuse: fix the ->direct_IO() treatment of iov_iterAl Viro
the callers rely upon having any iov_iter_truncate() done inside ->direct_IO() countered by iov_iter_reexpand(). Reported-by: Qian Cai <cai@redhat.com> Tested-by: Qian Cai <cai@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-16NFSv4.2: fix client's attribute cache management for copy_file_rangeOlga Kornievskaia
After client is done with the COPY operation, it needs to invalidate its pagecache (as it did no reading or writing of the data locally) and it needs to invalidate it's attributes just like it would have for a read on the source file and write on the destination file. Once the linux server started giving out read delegations to read+write opens, the destination file of the copy_file range started having delegations and not doing syncup on close of the file leading to xfstest failures for generic/430,431,432,433,565. v2: changing cache_validity needs to be protected by the i_lock. Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Fixes: 2e72448b07dc ("NFS: Add COPY nfs operation") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-09-16nfs: Fix security label length not being resetJeffrey Mitchell
nfs_readdir_page_filler() iterates over entries in a directory, reusing the same security label buffer, but does not reset the buffer's length. This causes decode_attr_security_label() to return -ERANGE if an entry's security label is longer than the previous one's. This error, in nfs4_decode_dirent(), only gets passed up as -EAGAIN, which causes another failed attempt to copy into the buffer. The second error is ignored and the remaining entries do not show up in ls, specifically the getdents64() syscall. Reproduce by creating multiple files in NFS and giving one of the later files a longer security label. ls will not see that file nor any that are added afterwards, though they will exist on the backend. In nfs_readdir_page_filler(), reset security label buffer length before every reuse Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io> Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-09-14Merge tag 'for-5.9-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One of the recent lockdep fixes introduced a bug that breaks the search ioctl, which is used by some applications (bees, compsize). The patch made it to stable trees so we need this fixup to make it work again" * tag 'for-5.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix wrong address when faulting in pages in the search ioctl
2020-09-14io_uring: don't run task work on an exiting taskJens Axboe
This isn't safe, and isn't needed either. We are guaranteed that any work we queue is on a live task (and will be run), or it goes to our backup io-wq threads if the task is exiting. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-14io_uring: drop 'ctx' ref on task work cancelationJens Axboe
If task_work ends up being marked for cancelation, we go through a cancelation helper instead of the queue path. In converting task_work to always hold a ctx reference, this path was missed. Make sure that io_req_task_cancel() puts the reference that is being held against the ctx. Fixes: 6d816e088c35 ("io_uring: hold 'ctx' reference around task_work queue + execute") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-14btrfs: fix wrong address when faulting in pages in the search ioctlFilipe Manana
When faulting in the pages for the user supplied buffer for the search ioctl, we are passing only the base address of the buffer to the function fault_in_pages_writeable(). This means that after the first iteration of the while loop that searches for leaves, when we have a non-zero offset, stored in 'sk_offset', we try to fault in a wrong page range. So fix this by adding the offset in 'sk_offset' to the base address of the user supplied buffer when calling fault_in_pages_writeable(). Several users have reported that the applications compsize and bees have started to operate incorrectly since commit a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl") was added to stable trees, and these applications make heavy use of the search ioctls. This fixes their issues. Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/ Link: https://github.com/kilobyte/compsize/issues/34 Fixes: a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl") CC: stable@vger.kernel.org # 4.4+ Tested-by: A L <mail@lechevalier.se> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-13io_uring: grab any needed state during defer prepJens Axboe
Always grab work environment for deferred links. The assumption that we will be running it always from the task in question is false, as exiting tasks may mean that we're deferring this one to a thread helper. And at that point it's too late to grab the work environment. Fixes: debb85f496c9 ("io_uring: factor out grab_env() from defer_prep()") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-13Merge tag 'driver-core-5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and debugfs fixes for 5.9-rc5 Included in here are: - firmware loader memory leak fix - firmware loader testing fixes for non-EFI systems - device link locking fixes found by lockdep - kobject_del() bugfix that has been affecting some callers - debugfs minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: test_firmware: Test platform fw loading on non-EFI systems PM: <linux/device.h>: fix @em_pd kernel-doc warning kobject: Drop unneeded conditional in __kobject_del() driver core: Fix device_pm_lock() locking for device links MAINTAINERS: Add the security document to SECURITY CONTACT driver code: print symbolic error code debugfs: Fix module state check condition kobject: Restore old behaviour of kobject_del(NULL) firmware_loader: fix memory leak for paged buffer
2020-09-12Merge tag 'for-5.9-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes: - regression fix for a crash after failed snapshot creation - one more lockep fix: use nofs allocation when allocating missing device - fix reloc tree leak on degraded mount - make some extent buffer alignment checks less strict to mount filesystems created by btrfs-convert" * tag 'for-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix NULL pointer dereference after failure to create snapshot btrfs: free data reloc tree on failed mount btrfs: require only sector size alignment for parent eb bytenr btrfs: fix lockdep splat in add_missing_dev
2020-09-12Merge tag '5.9-rc4-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fix from Steve French: "A fix for lookup on DFS link when cifsacl or modefromsid is used" * tag '5.9-rc4-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix DFS mount with cifsacl/modefromsid
2020-09-10epoll: EPOLL_CTL_ADD: close the race in decision to take fast pathAl Viro
Checking for the lack of epitems refering to the epoll we want to insert into is not enough; we might have an insertion of that epoll into another one that has already collected the set of files to recheck for excessive reverse paths, but hasn't gotten to creating/inserting the epitem for it. However, any such insertion in progress can be detected - it will update the generation count in our epoll when it's done looking through it for files to check. That gets done under ->mtx of our epoll and that allows us to detect that safely. We are *not* holding epmutex here, so the generation count is not stable. However, since both the update of ep->gen by loop check and (later) insertion into ->f_ep_link are done with ep->mtx held, we are fine - the sequence is grab epmutex bump loop_check_gen ... grab tep->mtx // 1 tep->gen = loop_check_gen ... drop tep->mtx // 2 ... grab tep->mtx // 3 ... insert into ->f_ep_link ... drop tep->mtx // 4 bump loop_check_gen drop epmutex and if the fastpath check in another thread happens for that eventpoll, it can come * before (1) - in that case fastpath is just fine * after (4) - we'll see non-empty ->f_ep_link, slow path taken * between (2) and (3) - loop_check_gen is stable, with ->mtx providing barriers and we end up taking slow path. Note that ->f_ep_link emptiness check is slightly racy - we are protected against insertions into that list, but removals can happen right under us. Not a problem - in the worst case we'll end up taking a slow path for no good reason. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-10Merge tag 'f2fs-for-5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "Small bug fixes for: - SMR drive fix - infinite loop when building free node ids - EOF at DIO read" * tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: Return EOF on unaligned end of file DIO read f2fs: fix indefinite loop scanning for free nid f2fs: Fix type of section block count variables
2020-09-10epoll: replace ->visited/visited_list with generation countAl Viro
removes the need to clear it, along with the races. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-09epoll: do not insert into poll queues until all sanity checks are doneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-09Merge tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFS/RDMA resource leak - Fix the error handling during delegation recall - NFSv4.0 needs to return the delegation on a zero-stateid SETATTR - Stop printk reading past end of string * tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: stop printk reading past end of string NFS: Zero-stateid SETATTR should first return delegation NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall xprtrdma: Release in-flight MRs on disconnect
2020-09-08f2fs: Return EOF on unaligned end of file DIO readGabriel Krisman Bertazi
Reading past end of file returns EOF for aligned reads but -EINVAL for unaligned reads on f2fs. While documentation is not strict about this corner case, most filesystem returns EOF on this case, like iomap filesystems. This patch consolidates the behavior for f2fs, by making it return EOF(0). it can be verified by a read loop on a file that does a partial read before EOF (A file that doesn't end at an aligned address). The following code fails on an unaligned file on f2fs, but not on btrfs, ext4, and xfs. while (done < total) { ssize_t delta = pread(fd, buf + done, total - done, off + done); if (!delta) break; ... } It is arguable whether filesystems should actually return EOF or -EINVAL, but since iomap filesystems support it, and so does the original DIO code, it seems reasonable to consolidate on that. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-08f2fs: fix indefinite loop scanning for free nidSahitya Tummala
If the sbi->ckpt->next_free_nid is not NAT block aligned and if there are free nids in that NAT block between the start of the block and next_free_nid, then those free nids will not be scanned in scan_nat_page(). This results into mismatch between nm_i->available_nids and the sum of nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids will always be greater than the sum of free nids in all the blocks. Under this condition, if we use all the currently scanned free nids, then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids is still not zero but nm_i->free_nid_count of that partially scanned NAT block is zero. Fix this to align the nm_i->next_scan_nid to the first nid of the corresponding NAT block. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-08f2fs: Fix type of section block count variablesShin'ichiro Kawasaki
Commit da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") added code to count blocks of each section using variables with type 'unsigned short', which has 2 bytes size in many systems. However, the counts can be larger than the 2 bytes range and type conversion results in wrong values. Especially when the f2fs sections have blocks as many as USHRT_MAX + 1, the count is handled as 0. This triggers eternal loop in init_dirty_segmap() at mount system call. Fix this by changing the type of the variables to block_t. Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-07btrfs: fix NULL pointer dereference after failure to create snapshotFilipe Manana
When trying to get a new fs root for a snapshot during the transaction at transaction.c:create_pending_snapshot(), if btrfs_get_new_fs_root() fails we leave "pending->snap" pointing to an error pointer, and then later at ioctl.c:create_snapshot() we dereference that pointer, resulting in a crash: [12264.614689] BUG: kernel NULL pointer dereference, address: 00000000000007c4 [12264.615650] #PF: supervisor write access in kernel mode [12264.616487] #PF: error_code(0x0002) - not-present page [12264.617436] PGD 0 P4D 0 [12264.618328] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [12264.619150] CPU: 0 PID: 2310635 Comm: fsstress Tainted: G W 5.9.0-rc3-btrfs-next-67 #1 [12264.619960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [12264.621769] RIP: 0010:btrfs_mksubvol+0x438/0x4a0 [btrfs] [12264.622528] Code: bc ef ff ff (...) [12264.624092] RSP: 0018:ffffaa6fc7277cd8 EFLAGS: 00010282 [12264.624669] RAX: 00000000fffffff4 RBX: ffff9d3e8f151a60 RCX: 0000000000000000 [12264.625249] RDX: 0000000000000001 RSI: ffffffff9d56c9be RDI: fffffffffffffff4 [12264.625830] RBP: ffff9d3e8f151b48 R08: 0000000000000000 R09: 0000000000000000 [12264.626413] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4 [12264.626994] R13: ffff9d3ede380538 R14: ffff9d3ede380500 R15: ffff9d3f61b2eeb8 [12264.627582] FS: 00007f140d5d8200(0000) GS:ffff9d3fb5e00000(0000) knlGS:0000000000000000 [12264.628176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12264.628773] CR2: 00000000000007c4 CR3: 000000020f8e8004 CR4: 00000000003706f0 [12264.629379] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [12264.629994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [12264.630594] Call Trace: [12264.631227] btrfs_mksnapshot+0x7b/0xb0 [btrfs] [12264.631840] __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs] [12264.632458] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs] [12264.633078] btrfs_ioctl+0x1864/0x3130 [btrfs] [12264.633689] ? do_sys_openat2+0x1a7/0x2d0 [12264.634295] ? kmem_cache_free+0x147/0x3a0 [12264.634899] ? __x64_sys_ioctl+0x83/0xb0 [12264.635488] __x64_sys_ioctl+0x83/0xb0 [12264.636058] do_syscall_64+0x33/0x80 [12264.636616] entry_SYSCALL_64_after_hwframe+0x44/0xa9 (gdb) list *(btrfs_mksubvol+0x438) 0x7c7b8 is in btrfs_mksubvol (fs/btrfs/ioctl.c:858). 853 ret = 0; 854 pending_snapshot->anon_dev = 0; 855 fail: 856 /* Prevent double freeing of anon_dev */ 857 if (ret && pending_snapshot->snap) 858 pending_snapshot->snap->anon_dev = 0; 859 btrfs_put_root(pending_snapshot->snap); 860 btrfs_subvolume_release_metadata(root, &pending_snapshot->block_rsv); 861 free_pending: 862 if (pending_snapshot->anon_dev) So fix this by setting "pending->snap" to NULL if we get an error from the call to btrfs_get_new_fs_root() at transaction.c:create_pending_snapshot(). Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-07btrfs: free data reloc tree on failed mountJosef Bacik
While testing a weird problem with -o degraded, I noticed I was getting leaked root errors BTRFS warning (device loop0): writable mount is not allowed due to too many missing devices BTRFS error (device loop0): open_ctree failed BTRFS error (device loop0): leaked root -9-0 refcount 1 This is the DATA_RELOC root, which gets read before the other fs roots, but is included in the fs roots radix tree. Handle this by adding a btrfs_drop_and_free_fs_root() on the data reloc root if it exists. This is ok to do here if we fail further up because we will only drop the ref if we delete the root from the radix tree, and all other cleanup won't be duplicated. CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>