| Age | Commit message (Collapse) | Author |
|---|
|
Pull smb client fixes from Steve French:
"Three smb client fixes, all for stable:
- fix for oops in unmount race with lease break of deferred close
- debugging improvement for reconnect
- fix for fscache deadlock (folio_wait_bit_common hang)"
* tag '6.5-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: display network namespace in debug information
cifs: Release folio lock on fscache read hit.
cifs: fix potential oops in cifs_oplock_break
|
|
We recently had problems where a network namespace was deleted
causing hard to debug reconnect problems. To help deal with
configuration issues like this it is useful to dump the network
namespace to better debug what happened.
So add this to information displayed in /proc/fs/cifs/DebugData for
the server (and channels if mounted with multichannel). For example:
Local Users To Server: 1 SecMode: 0x1 Req On Wire: 0 Net namespace: 4026531840
This can be easily compared with what is displayed for the
processes on the system. For example /proc/1/ns/net in this case
showed the same thing (see below), and we can see that the namespace
is still valid in this example.
'net:[4026531840]'
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Under the current code, when cifs_readpage_worker is called, the call
contract is that the callee should unlock the page. This is documented
in the read_folio section of Documentation/filesystems/vfs.rst as:
> The filesystem should unlock the folio once the read has completed,
> whether it was successful or not.
Without this change, when fscache is in use and cache hit occurs during
a read, the page lock is leaked, producing the following stack on
subsequent reads (via mmap) to the page:
$ cat /proc/3890/task/12864/stack
[<0>] folio_wait_bit_common+0x124/0x350
[<0>] filemap_read_folio+0xad/0xf0
[<0>] filemap_fault+0x8b1/0xab0
[<0>] __do_fault+0x39/0x150
[<0>] do_fault+0x25c/0x3e0
[<0>] __handle_mm_fault+0x6ca/0xc70
[<0>] handle_mm_fault+0xe9/0x350
[<0>] do_user_addr_fault+0x225/0x6c0
[<0>] exc_page_fault+0x84/0x1b0
[<0>] asm_exc_page_fault+0x27/0x30
This requires a reboot to resolve; it is a deadlock.
Note however that the call to cifs_readpage_from_fscache does mark the
page clean, but does not free the folio lock. This happens in
__cifs_readpage_from_fscache on success. Releasing the lock at that
point however is not appropriate as cifs_readahead also calls
cifs_readpage_from_fscache and *does* unconditionally release the lock
after its return. This change therefore effectively makes
cifs_readpage_worker work like cifs_readahead.
Signed-off-by: Russell Harmon <russ@har.mn>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"More fixes, some of them going back to older releases and there are
fixes for hangs in stress tests regarding space caching:
- fixes and progress tracking for hangs in free space caching, found
by test generic/475
- writeback fixes, write pages in integrity mode and skip writing
pages that have been written meanwhile
- properly clear end of extent range after an error
- relocation fixes:
- fix race betwen qgroup tree creation and relocation
- detect and report invalid reloc roots"
* tag 'for-6.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: set cache_block_group_error if we find an error
btrfs: reject invalid reloc tree root keys with stack dump
btrfs: exit gracefully if reloc roots don't match
btrfs: avoid race between qgroup tree creation and relocation
btrfs: properly clear end of the unreserved range in cow_file_range
btrfs: don't wait for writeback on clean pages in extent_write_cache_pages
btrfs: don't stop integrity writeback too early
btrfs: wait for actual caching progress during allocation
|
|
The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.
Since then the line got only touched up to keep compiling.
While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock(). It adds spurious traffic, for short.
On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.
As such, remove it.
I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.
Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- The switch to using iomap for executing a direct synchronous write to
sequential files using a zone append BIO overlooked cases where the
BIO built by iomap is too large and needs splitting, which is not
allowed with zone append.
Fix this by using regular write commands instead. The use of zone
append commands will be reintroduced later with proper support from
iomap.
* tag 'zonefs-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix synchronous direct writes to sequential files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes. 11 of these are cc:stable and the remainder address
post-6.4 issues, or are not considered suitable for -stable
backporting"
* tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/core: initialize damo_filter->list from damos_new_filter()
nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput
selftests: cgroup: fix test_kmem_basic false positives
fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
MAINTAINERS: add maple tree mailing list
mm: compaction: fix endless looping over same migrate block
selftests: mm: ksm: fix incorrect evaluation of parameter
hugetlb: do not clear hugetlb dtor until allocating vmemmap
mm: memory-failure: avoid false hwpoison page mapped error info
mm: memory-failure: fix potential unexpected return value from unpoison_memory()
mm/swapfile: fix wrong swap entry type for hwpoisoned swapcache page
radix tree test suite: fix incorrect allocation size for pthreads
crypto, cifs: fix error handling in extract_iter_to_sg()
zsmalloc: fix races between modifications of fullness and isolated
|
|
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206
[Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009
[Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000
[Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty.
Fixes: da787d5b7498 ("SMB3: Do not send lease break acknowledgment if all file handles have been closed")
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We set cache_block_group_error if btrfs_cache_block_group() returns an
error, this is because we could end up not finding space to allocate and
mistakenly return -ENOSPC, and which could then abort the transaction
with the incorrect errno, and in the case of ENOSPC result in a
WARN_ON() that will trip up tests like generic/475.
However there's the case where multiple threads can be racing, one
thread gets the proper error, and the other thread doesn't actually call
btrfs_cache_block_group(), it instead sees ->cached ==
BTRFS_CACHE_ERROR. Again the result is the same, we fail to allocate
our space and return -ENOSPC. Instead we need to set
cache_block_group_error to -EIO in this case to make sure that if we do
not make our allocation we get the appropriate error returned back to
the caller.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported a crash that an ASSERT() got triggered inside
prepare_to_merge().
That ASSERT() makes sure the reloc tree is properly pointed back by its
subvolume tree.
[CAUSE]
After more debugging output, it turns out we had an invalid reloc tree:
BTRFS error (device loop1): reloc tree mismatch, root 8 has no reloc root, expect reloc root key (-8, 132, 8) gen 17
Note the above root key is (TREE_RELOC_OBJECTID, ROOT_ITEM,
QUOTA_TREE_OBJECTID), meaning it's a reloc tree for quota tree.
But reloc trees can only exist for subvolumes, as for non-subvolume
trees, we just COW the involved tree block, no need to create a reloc
tree since those tree blocks won't be shared with other trees.
Only subvolumes tree can share tree blocks with other trees (thus they
have BTRFS_ROOT_SHAREABLE flag).
Thus this new debug output proves my previous assumption that corrupted
on-disk data can trigger that ASSERT().
[FIX]
Besides the dedicated fix and the graceful exit, also let tree-checker to
check such root keys, to make sure reloc trees can only exist for subvolumes.
CC: stable@vger.kernel.org # 5.15+
Reported-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported a crash that an ASSERT() got triggered inside
prepare_to_merge().
[CAUSE]
The root cause of the triggered ASSERT() is we can have a race between
quota tree creation and relocation.
This leads us to create a duplicated quota tree in the
btrfs_read_fs_root() path, and since it's treated as fs tree, it would
have ROOT_SHAREABLE flag, causing us to create a reloc tree for it.
The bug itself is fixed by a dedicated patch for it, but this already
taught us the ASSERT() is not something straightforward for
developers.
[ENHANCEMENT]
Instead of using an ASSERT(), let's handle it gracefully and output
extra info about the mismatch reloc roots to help debug.
Also with the above ASSERT() removed, we can trigger ASSERT(0)s inside
merge_reloc_roots() later.
Also replace those ASSERT(0)s with WARN_ON()s.
CC: stable@vger.kernel.org # 5.15+
Reported-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported a weird ASSERT() triggered inside prepare_to_merge().
assertion failed: root->reloc_root == reloc_root, in fs/btrfs/relocation.c:1919
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1919!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9904 Comm: syz-executor.3 Not tainted
6.4.0-syzkaller-08881-g533925cb7604 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 05/27/2023
RIP: 0010:prepare_to_merge+0xbb2/0xc40 fs/btrfs/relocation.c:1919
Code: fe e9 f5 (...)
RSP: 0018:ffffc9000325f760 EFLAGS: 00010246
RAX: 000000000000004f RBX: ffff888075644030 RCX: 1481ccc522da5800
RDX: ffffc90005c09000 RSI: 00000000000364ca RDI: 00000000000364cb
RBP: ffffc9000325f870 R08: ffffffff816f33ac R09: 1ffff9200064bea0
R10: dffffc0000000000 R11: fffff5200064bea1 R12: ffff888075644000
R13: ffff88803b166000 R14: ffff88803b166560 R15: ffff88803b166558
FS: 00007f4e305fd700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056080679c000 CR3: 00000000193ad000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
relocate_block_group+0xa5d/0xcd0 fs/btrfs/relocation.c:3749
btrfs_relocate_block_group+0x7ab/0xd70 fs/btrfs/relocation.c:4087
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3283
__btrfs_balance+0x1b06/0x2690 fs/btrfs/volumes.c:4018
btrfs_balance+0xbdb/0x1120 fs/btrfs/volumes.c:4402
btrfs_ioctl_balance+0x496/0x7c0 fs/btrfs/ioctl.c:3604
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4e2f88c389
[CAUSE]
With extra debugging, the offending reloc_root is for quota tree (rootid 8).
Normally we should not use the reloc tree for quota root at all, as reloc
trees are only for subvolume trees.
But there is a race between quota enabling and relocation, this happens
after commit 85724171b302 ("btrfs: fix the btrfs_get_global_root return value").
Before that commit, for quota and free space tree, we exit immediately
if we cannot grab it from fs_info.
But now we would try to read it from disk, just as if they are fs trees,
this sets ROOT_SHAREABLE flags in such race:
Thread A | Thread B
---------------------------------+------------------------------
btrfs_quota_enable() |
| | btrfs_get_root_ref()
| | |- btrfs_get_global_root()
| | | Returned NULL
| | |- btrfs_lookup_fs_root()
| | | Returned NULL
|- btrfs_create_tree() | |
| Now quota root item is | |
| inserted | |- btrfs_read_tree_root()
| | | Got the newly inserted quota root
| | |- btrfs_init_fs_root()
| | | Set ROOT_SHAREABLE flag
[FIX]
Get back to the old behavior by returning PTR_ERR(-ENOENT) if the target
objectid is not a subvolume tree or data reloc tree.
Reported-and-tested-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Fixes: 85724171b302 ("btrfs: fix the btrfs_get_global_root return value")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the call to btrfs_reloc_clone_csums in cow_file_range returns an
error, we jump to the out_unlock label with the extent_reserved variable
set to false. The cleanup at the label will then call
extent_clear_unlock_delalloc on the range from start to end. But we've
already added cur_alloc_size to start before the jump, so there might no
range be left from the newly incremented start to end. Move the check for
'start < end' so that it is reached by also for the !extent_reserved case.
CC: stable@vger.kernel.org # 6.1+
Fixes: a315e68f6e8b ("Btrfs: fix invalid attempt to free reserved space on failure to cow range")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
__extent_writepage could have started on more pages than the one it was
called for. This happens regularly for zoned file systems, and in theory
could happen for compressed I/O if the worker thread was executed very
quickly. For such pages extent_write_cache_pages waits for writeback
to complete before moving on to the next page, which is highly inefficient
as it blocks the flusher thread.
Port over the PageDirty check that was added to write_cache_pages in
commit 515f4a037fb ("mm: write_cache_pages optimise page cleaning") to
fix this.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
extent_write_cache_pages stops writing pages as soon as nr_to_write hits
zero. That is the right thing for opportunistic writeback, but incorrect
for data integrity writeback, which needs to ensure that no dirty pages
are left in the range. Thus only stop the writeback for WB_SYNC_NONE
if nr_to_write hits 0.
This is a port of write_cache_pages changes in commit 05fe478dd04e
("mm: write_cache_pages integrity fix").
Note that I've only trigger the problem with other changes to the btrfs
writeback code, but this condition seems worthwhile fixing anyway.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Recently we've been having mysterious hangs while running generic/475 on
the CI system. This turned out to be something like this:
Task 1
dmsetup suspend --nolockfs
-> __dm_suspend
-> dm_wait_for_completion
-> dm_wait_for_bios_completion
-> Unable to complete because of IO's on a plug in Task 2
Task 2
wb_workfn
-> wb_writeback
-> blk_start_plug
-> writeback_sb_inodes
-> Infinite loop unable to make an allocation
Task 3
cache_block_group
->read_extent_buffer_pages
->Waiting for IO to complete that can't be submitted because Task 1
suspended the DM device
The problem here is that we need Task 2 to be scheduled completely for
the blk plug to flush. Normally this would happen, we normally wait for
the block group caching to finish (Task 3), and this schedule would
result in the block plug flushing.
However if there's enough free space available from the current caching
to satisfy the allocation we won't actually wait for the caching to
complete. This check however just checks that we have enough space, not
that we can make the allocation. In this particular case we were trying
to allocate 9MiB, and we had 10MiB of free space, but we didn't have
9MiB of contiguous space to allocate, and thus the allocation failed and
we looped.
We specifically don't cycle through the FFE loop until we stop finding
cached block groups because we don't want to allocate new block groups
just because we're caching, so we short circuit the normal loop once we
hit LOOP_CACHING_WAIT and we found a caching block group.
This is normally fine, except in this particular case where the caching
thread can't make progress because the DM device has been suspended.
Fix this by not only waiting for free space to >= the amount of space we
want to allocate, but also that we make some progress in caching from
the time we start waiting. This will keep us from busy looping when the
caching is taking a while but still theoretically has enough space for
us to allocate from, and fixes this particular case by forcing us to
actually sleep and wait for forward progress, which will flush the plug.
With this fix we're no longer hanging with generic/475.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both also for stable:
- improve buffer validation when multiple EAs returned
- missing check for command payload size"
* tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
ksmbd: validate command request size
|
|
Commit 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
changes zonefs code from a self-built zone append BIO to using iomap for
synchronous direct writes. This change relies on iomap submit BIO
callback to change the write BIO built by iomap to a zone append BIO.
However, this change overlooked the fact that a write BIO may be very
large as it is split when issued. The change from a regular write to a
zone append operation for the built BIO can result in a block layer
warning as zone append BIO are not allowed to be split.
WARNING: CPU: 18 PID: 202210 at block/bio.c:1644 bio_split+0x288/0x350
Call Trace:
? __warn+0xc9/0x2b0
? bio_split+0x288/0x350
? report_bug+0x2e6/0x390
? handle_bug+0x41/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? bio_split+0x288/0x350
bio_split_rw+0x4bc/0x810
? __pfx_bio_split_rw+0x10/0x10
? lockdep_unlock+0xf2/0x250
__bio_split_to_limits+0x1d8/0x900
blk_mq_submit_bio+0x1cf/0x18a0
? __pfx_iov_iter_extract_pages+0x10/0x10
? __pfx_blk_mq_submit_bio+0x10/0x10
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? mark_held_locks+0x9e/0xe0
__submit_bio+0x1ea/0x290
? __pfx___submit_bio+0x10/0x10
? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
submit_bio_noacct_nocheck+0x675/0xa20
? __pfx_bio_iov_iter_get_pages+0x10/0x10
? __pfx_submit_bio_noacct_nocheck+0x10/0x10
iomap_dio_bio_iter+0x624/0x1280
__iomap_dio_rw+0xa22/0x18a0
? lock_is_held_type+0xe3/0x140
? __pfx___iomap_dio_rw+0x10/0x10
? lock_release+0x362/0x620
? zonefs_file_write_iter+0x74c/0xc80 [zonefs]
? down_write+0x13d/0x1e0
iomap_dio_rw+0xe/0x40
zonefs_file_write_iter+0x5ea/0xc80 [zonefs]
do_iter_readv_writev+0x18b/0x2c0
? __pfx_do_iter_readv_writev+0x10/0x10
? inode_security+0x54/0xf0
do_iter_write+0x13b/0x7c0
? lock_is_held_type+0xe3/0x140
vfs_writev+0x185/0x550
? __pfx_vfs_writev+0x10/0x10
? __handle_mm_fault+0x9bd/0x1c90
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? __up_read+0x1ea/0x720
? do_pwritev+0x136/0x1f0
do_pwritev+0x136/0x1f0
? __pfx_do_pwritev+0x10/0x10
? syscall_enter_from_user_mode+0x22/0x90
? lockdep_hardirqs_on+0x7d/0x100
do_syscall_64+0x58/0x80
This error depends on the hardware used, specifically on the max zone
append bytes and max_[hw_]sectors limits. Tests using AMD Epyc machines
that have low limits did not reveal this issue while runs on Intel Xeon
machines with larger limits trigger it.
Manually splitting the zone append BIO using bio_split_rw() can solve
this issue but also requires issuing the fragment BIOs synchronously
with submit_bio_wait(), to avoid potential reordering of the zone append
BIO fragments, which would lead to data corruption. That is, this
solution is not better than using regular write BIOs which are subject
to serialization using zone write locking at the IO scheduler level.
Given this, fix the issue by removing zone append support and using
regular write BIOs for synchronous direct writes. This allows preseving
the use of iomap and having identical synchronous and asynchronous
sequential file write path. Zone append support will be reintroduced
later through io_uring commands to ensure that the needed special
handling is done correctly.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Replace remaining open-coded struct_size_t() instance (Gustavo A. R.
Silva)
- Adjust vboxsf's trailing arrays to be proper flexible arrays
* tag 'hardening-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
media: venus: Use struct_size_t() helper in pkt_session_unset_buffers()
vboxsf: Use flexible arrays for trailing string member
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Fix a freeze consistency check in gfs2_trans_add_meta()
- Don't use filemap_splice_read as it can cause deadlocks on gfs2
* tag 'gfs2-v6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't use filemap_splice_read
gfs2: Fix freeze consistency check in gfs2_trans_add_meta
|
|
Starting with patch 2cb1e08985, gfs2 started using the new function
filemap_splice_read rather than the old (and subsequently deleted)
function generic_file_splice_read.
filemap_splice_read works by taking references to a number of folios in
the page cache and splicing those folios into a pipe. The folios are
then read from the pipe and the folio references are dropped. This can
take an arbitrary amount of time. We cannot allow that in gfs2 because
those folio references will pin the inode glock to the node and prevent
it from being demoted, which can lead to cluster-wide deadlocks.
Instead, use copy_splice_read.
(In addition, the old generic_file_splice_read called into ->read_iter,
which called gfs2_file_read_iter, which took the inode glock during the
operation. The new filemap_splice_read interface does not take the
inode glock anymore. This is fixable, but it still wouldn't prevent
cluster-wide deadlocks.)
Fixes: 2cb1e08985e3 ("splice: Use filemap_splice_read() instead of generic_file_splice_read()")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function gfs2_trans_add_meta() checks for the SDF_FROZEN flag to make
sure that no buffers are added to a transaction while the filesystem is
frozen. With the recent freeze/thaw rework, the SDF_FROZEN flag is
cleared after thaw_super() is called, which is sufficient for
serializing freeze/thaw.
However, other filesystem operations started after thaw_super() may now
be calling gfs2_trans_add_meta() before the SDF_FROZEN flag is cleared,
which will trigger the SDF_FROZEN check in gfs2_trans_add_meta(). Fix
that by checking the s_writers.frozen state instead.
In addition, make sure not to call gfs2_assert_withdraw() with the
sd_log_lock spin lock held. Check for a withdrawn filesystem before
checking for a frozen filesystem, and don't pin/add buffers to the
current transaction in case of a failure in either case.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup
- Clean up directory iterators and clarify file_needs_f_pos_lock()
* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: rely on ->iterate_shared to determine f_pos locking
vfs: get rid of old '->iterate' directory operation
proc: fix missing conversion to 'iterate_shared'
open: make RESOLVE_CACHED correctly test for O_TMPFILE
|
|
Now that we removed ->iterate we don't need to check for either
->iterate or ->iterate_shared in file_needs_f_pos_lock(). Simply check
for ->iterate_shared instead. This will tell us whether we need to
unconditionally take the lock. Not just does it allow us to avoid
checking f_inode's mode it also actually clearly shows that we're
locking because of readdir.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.
Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.
This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.
The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.
Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I'm looking at the directory handling due to the discussion about f_pos
locking (see commit 797964253d35: "file: reinstate f_pos locking
optimization for regular files"), and wanting to clean that up.
And one source of ugliness is how we were supposed to move filesystems
over to the '->iterate_shared()' function that only takes the inode lock
for reading many many years ago, but several filesystems still use the
bad old '->iterate()' that takes the inode lock for exclusive access.
See commit 6192269444eb ("introduce a parallel variant of ->iterate()")
that also added some documentation stating
Old method is only used if the new one is absent; eventually it will
be removed. Switch while you still can; the old one won't stay.
and that was back in April 2016. Here we are, many years later, and the
old version is still clearly sadly alive and well.
Now, some of those old style iterators are probably just because the
filesystem may end up having per-inode mutable data that it uses for
iterating a directory, but at least one case is just a mistake.
Al switched over most filesystems to use '->iterate_shared()' back when
it was introduced. In particular, the /proc filesystem was converted as
one of the first ones in commit f50752eaa0b0 ("switch all procfs
directories ->iterate_shared()").
But then later one new user of '->iterate()' was then re-introduced by
commit 6d9c939dbe4d ("procfs: add smack subdir to attrs").
And that's clearly not what we wanted, since that new case just uses the
same 'proc_pident_readdir()' and 'proc_pident_lookup()' helper functions
that other /proc pident directories use, and they are most definitely
safe to use with the inode lock held shared.
So just fix it.
This still leaves a fair number of oddball filesystems using the
old-style directory iterator (ceph, coda, exfat, jfs, ntfs, ocfs2,
overlayfs, and vboxsf), but at least we don't have any remaining in the
core filesystems.
I'm going to add a wrapper function that just drops the read-lock and
takes it as a write lock, so that we can clean up the core vfs layer and
make all the ugly 'this filesystem needs exclusive inode locking' be
just filesystem-internal warts.
I just didn't want to make that conversion when we still had a core user
left.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.
Cc: stable@vger.kernel.org # v5.12+
Fixes: 99668f618062 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21598
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except
for SMB2_OPLOCK_BREAK_HE command, the request size of other commands
is not checked, it's not expected. Fix it by add check for request
size of other commands.
Cc: stable@vger.kernel.org
Fixes: 2b9b8f3b68ed ("ksmbd: validate command payload size")
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb client fix from Steve French:
- Fix DFS interlink problem (different namespace)
* tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix dfs link mount against w2k8
|
|
During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer(). Previously,
nilfs_evict_inode() could cause use-after-free read for nilfs_root if
inodes are left in "garbage_list" and released by nilfs_dispose_list at
the end of nilfs_detach_log_writer(), and this bug was fixed by commit
9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in
nilfs_evict_inode()").
However, it turned out that there is another possibility of UAF in the
call path where mark_inode_dirty_sync() is called from iput():
nilfs_detach_log_writer()
nilfs_dispose_list()
iput()
mark_inode_dirty_sync()
__mark_inode_dirty()
nilfs_dirty_inode()
__nilfs_mark_inode_dirty()
nilfs_load_inode_block() --> causes UAF of nilfs_root struct
This can happen after commit 0ae45f63d4ef ("vfs: add support for a
lazytime mount option"), which changed iput() to call
mark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIME
flag and i_nlink is non-zero.
This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirty
data after degenerating to read-only") when using the syzbot reproducer,
but the issue has potentially existed before.
Fix this issue by adding a "purging flag" to the nilfs structure, setting
that flag while disposing the "garbage_list" and checking it in
__nilfs_mark_inode_dirty().
Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root
in nilfs_evict_inode()"), this patch does not rely on ns_writer to
determine whether to skip operations, so as not to break recovery on
mount. The nilfs_salvage_orphan_logs routine dirties the buffer of
salvaged data before attaching the log writer, so changing
__nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULL
will cause recovery write to fail. The purpose of using the cleanup-only
flag is to allow for narrowing of such conditions.
Link: https://lkml.kernel.org/r/20230728191318.33047-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+74db8b3087f293d3a13a@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000b4e906060113fd63@google.com
Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some architectures do not populate the entire range categorised by
KCORE_TEXT, so we must ensure that the kernel address we read from is
valid.
Unfortunately there is no solution currently available to do so with a
purely iterator solution so reinstate the bounce buffer in this instance
so we can use copy_from_kernel_nofault() in order to avoid page faults
when regions are unmapped.
This change partly reverts commit 2e1c0170771e ("fs/proc/kcore: avoid
bounce buffer for ktext data"), reinstating the bounce buffer, but adapts
the code to continue to use an iterator.
[lstoakes@gmail.com: correct comment to be strictly correct about reasoning]
Link: https://lkml.kernel.org/r/525a3f14-74fa-4c22-9fca-9dab4de8a0c3@lucifer.local
Link: https://lkml.kernel.org/r/20230731215021.70911-1-lstoakes@gmail.com
Fixes: 2e1c0170771e ("fs/proc/kcore: avoid bounce buffer for ktext data")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Closes: https://lore.kernel.org/all/ZHc2fm+9daF6cgCE@krava
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull ceph fixes from Ilya Dryomov:
"Two patches to improve RBD exclusive lock interaction with
osd_request_timeout option and another fix to reduce the potential for
erroneous blocklisting -- this time in CephFS. All going to stable"
* tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-client:
libceph: fix potential hang in ceph_osdc_notify()
rbd: prevent busy loop when requesting exclusive lock
ceph: defer stopping mdsc delayed_work
|
|
In commit 20ea1e7d13c1 ("file: always lock position for
FMODE_ATOMIC_POS") we ended up always taking the file pos lock, because
pidfd_getfd() could get a reference to the file even when it didn't have
an elevated file count due to threading of other sharing cases.
But Mateusz Guzik reports that the extra locking is actually measurable,
so let's re-introduce the optimization, and only force the locking for
directory traversal.
Directories need the lock for correctness reasons, while regular files
only need it for "POSIX semantics". Since pidfd_getfd() is about
debuggers etc special things that are _way_ outside of POSIX, we can
relax the rules for that case.
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/linux-fsdevel/20230803095311.ijpvhx3fyrbkasul@f/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix tmpfs splice read support
* tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: Fix reading via splice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix data corruption caused by insufficient decompression on
deduplicated compressed extents
- Drop a useless s_magic checking in erofs_kill_sb()
* tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: drop unnecessary WARN_ON() in erofs_kill_sb()
erofs: fix wrong primary bvec selection on deduplicated extents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix page allocation failure from allocation bitmap by using
kvmalloc_array/kvfree
- Add the check to validate if filename entries exceeds max filename
length
- Fix potential deadlock condition from dir_emit*()
* tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: release s_lock before calling dir_emit()
exfat: check if filename entries exceeds max filename length
exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree
|
|
Customer reported that they couldn't mount their DFS link that was
seen by the client as a DFS interlink -- special form of DFS link
where its single target may point to a different DFS namespace -- and
it turned out that it was just a regular DFS link where its referral
header flags missed the StorageServers bit thus making the client
think it couldn't tree connect to target directly without requiring
further referrals.
When the DFS link referral header flags misses the StoraServers bit
and its target doesn't respond to any referrals, then tree connect to
it.
Fixes: a1c0d00572fc ("cifs: share dfs connections and supers")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Flushing the dirty buffer may take a long time if the cluster is
overloaded or if there is network issue. So we should ping the
MDSs periodically to keep alive, else the MDS will blocklist
the kclient.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61843
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Previously, .kill_sb() will be called only after fill_super fails.
It will be changed [1].
Besides, checking for s_magic in erofs_kill_sb() is unnecessary from
any point of view. Let's get rid of it now.
[1] https://lore.kernel.org/r/20230731-flugbereit-wohnlage-78acdf95ab7e@brauner
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801014737.28614-1-hsiangkao@linux.alibaba.com
|
|
When handling deduplicated compressed data, there can be multiple
decompressed extents pointing to the same compressed data in one shot.
In such cases, the bvecs which belong to the longest extent will be
selected as the primary bvecs for real decompressors to decode and the
other duplicated bvecs will be directly copied from the primary bvecs.
Previously, only relative offsets of the longest extent were checked to
decompress the primary bvecs. On rare occasions, it can be incorrect
if there are several extents with the same start relative offset.
As a result, some short bvecs could be selected for decompression and
then cause data corruption.
For example, as Shijie Sun reported off-list, considering the following
extents of a file:
117: 903345.. 915250 | 11905 : 385024.. 389120 | 4096
...
119: 919729.. 930323 | 10594 : 385024.. 389120 | 4096
...
124: 968881.. 980786 | 11905 : 385024.. 389120 | 4096
The start relative offset is the same: 2225, but extent 119 (919729..
930323) is shorter than the others.
Let's restrict the bvec length in addition to the start offset if bvecs
are not full.
Reported-by: Shijie Sun <sunshijie@xiaomi.com>
Fixes: 5c2a64252c5d ("erofs: introduce partial-referenced pclusters")
Tested-by Shijie Sun <sunshijie@xiaomi.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230719065459.60083-1-hsiangkao@linux.alibaba.com
|
|
nfsd_splice_actor() has a clause in its loop that chops up a compound page
into individual pages such that if the same page is seen twice in a row, it
is discarded the second time. This is a problem with the advent of
shmem_splice_read() as that inserts zero_pages into the pipe in lieu of
pages that aren't present in the pagecache.
Fix this by assuming that the last page is being extended only if the
currently stored length + starting offset is not currently on a page
boundary.
This can be tested by NFS-exporting a tmpfs filesystem on the test machine
and truncating it to more than a page in size (eg. truncate -s 8192) and
then reading it by NFS. The first page will be all zeros, but thereafter
garbage will be read.
Note: I wonder if we can ever get a situation now where we get a splice
that gives us contiguous parts of a page in separate actor calls. As NFSD
can only be splicing from a file (I think), there are only three sources of
the page: copy_splice_read(), shmem_splice_read() and file_splice_read().
The first allocates pages for the data it reads, so the problem cannot
occur; the second should never see a partial page; and the third waits for
each page to become available before we're allowed to read from it.
Fixes: bd194b187115 ("shmem: Implement splice-read")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
cc: Hugh Dickins <hughd@google.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull smb client fixes from Steve French:
"Four small SMB3 client fixes:
- two reconnect fixes (to address the case where non-default
iocharset gets incorrectly overridden at reconnect with the
default charset)
- fix for NTLMSSP_AUTH request setting a flag incorrectly)
- Add missing check for invalid tlink (tree connection) in ioctl"
* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add missing return value check for cifs_sb_tlink
smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
cifs: fix charset issue in reconnection
fs/nls: make load_nls() take a const parameter
|
|
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"11 hotfixes. Five are cc:stable and the remainder address post-6.4
issues or aren't considered serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: fix hardware poison check in unpoison_memory()
proc/vmcore: fix signedness bug in read_from_oldmem()
mailmap: update remaining active codeaurora.org email addresses
mm: lock VMA in dup_anon_vma() before setting ->anon_vma
mm: fix memory ordering for mm_lock_seq and vm_lock_seq
scripts/spelling.txt: remove 'thead' as a typo
mm/pagewalk: fix EFI_PGT_DUMP of espfix area
shmem: minor fixes to splice-read implementation
tmpfs: fix Documentation of noswap and huge mount options
Revert "um: Use swap() to make code cleaner"
mm/damon/core-test: initialise context before test in damon_test_set_attrs()
|
|
Pull ceph fixes from Ilya Dryomov:
"A patch to reduce the potential for erroneous RBD exclusive lock
blocklisting (fencing) with a couple of prerequisites and a fixup to
prevent metrics from being sent to the MDS even just once after that
has been disabled by the user. All marked for stable"
* tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client:
rbd: retrieve and check lock owner twice before blocklisting
rbd: harden get_lock_owner_info() a bit
rbd: make get_lock_owner_info() return a single locker or NULL
ceph: never send metrics if disable_send_metrics is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fixes from Eric Van Hensbergen:
"Misc set of fixes for 9p.
Most of these clean up warnings we've gotten out of compilation tools,
but several of them were from inspection while hunting down a couple
of regressions.
The most important one is 75b396821cb7 ("fs/9p: remove unnecessary and
overrestrictive check") which caused a regression for some folks by
restricting mmap in any case where writeback caches weren't enabled.
Most of the other bugs caught via inspection were type mismatches"
* tag '9p-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: Remove unused extern declaration
9p: remove dead stores (variable set again without being read)
9p: virtio: skip incrementing unused variable
9p: virtio: make sure 'offs' is initialized in zc_request
9p: virtio: fix unlikely null pointer deref in handle_rerror
9p: fix ignored return value in v9fs_dir_release
fs/9p: remove unnecessary invalidate_inode_pages2
fs/9p: fix type mismatch in file cache mode helper
fs/9p: fix typo in comparison logic for cache mode
fs/9p: remove unnecessary and overrestrictive check
fs/9p: Fix a datatype used with V9FS_DIRECT_IO
|
|
The bug is the error handling:
if (tmp < nr_bytes) {
"tmp" can hold negative error codes but because "nr_bytes" is type size_t
the negative error codes are treated as very high positive values
(success). Fix this by changing "nr_bytes" to type ssize_t. The
"nr_bytes" variable is used to store values between 1 and PAGE_SIZE and
they can fit in ssize_t without any issue.
Link: https://lkml.kernel.org/r/b55f7eed-1c65-4adc-95d1-6c7c65a54a6e@moroto.mountain
Fixes: 5d8de293c224 ("vmcore: convert copy_oldmem_page() to take an iov_iter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix accounting of global block reserve size when block group tree is
enabled
- the async discard has been enabled in 6.2 unconditionally, but for
zoned mode it does not make that much sense to do it asynchronously
as the zones are reset as needed
- error handling and proper error value propagation fixes
* tag 'for-6.5-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check for commit error at btrfs_attach_transaction_barrier()
btrfs: check if the transaction was aborted at btrfs_wait_for_commit()
btrfs: remove BUG_ON()'s in add_new_free_space()
btrfs: account block group tree when calculating global reserve size
btrfs: zoned: do not enable async discard
|
