| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Use folios for symlinks in the page cache
FUSE already uses folios for its symlinks. Mirror that conversion
in the generic code and the NFS code. That lets us get rid of a few
folio->page->folio conversions in this path, and some of the few
remaining users of read_cache_page() / read_mapping_page()
- Try and make a few filesystem operations killable on the VFS
inode->i_mutex level
- Add sysctl vfs_cache_pressure_denom for bulk file operations
Some workloads need to preserve more dentries than we currently
allow through out sysctl interface
A HDFS servers with 12 HDDs per server, on a HDFS datanode startup
involves scanning all files and caching their metadata (including
dentries and inodes) in memory. Each HDD contains approximately 2
million files, resulting in a total of ~20 million cached dentries
after initialization
To minimize dentry reclamation, they set vfs_cache_pressure to 1.
Despite this configuration, memory pressure conditions can still
trigger reclamation of up to 50% of cached dentries, reducing the
cache from 20 million to approximately 10 million entries. During
the subsequent cache rebuild period, any HDFS datanode restart
operation incurs substantial latency penalties until full cache
recovery completes
To maintain service stability, more dentries need to be preserved
during memory reclamation. The current minimum reclaim ratio (1/100
of total dentries) remains too aggressive for such workload. This
patch introduces vfs_cache_pressure_denom for more granular cache
pressure control
The configuration [vfs_cache_pressure=1,
vfs_cache_pressure_denom=10000] effectively maintains the full 20
million dentry cache under memory pressure, preventing datanode
restart performance degradation
- Avoid some jumps in inode_permission() using likely()/unlikely()
- Avid a memory access which is most likely a cache miss when
descending into devcgroup_inode_permission()
- Add fastpath predicts for stat() and fdput()
- Anonymous inodes currently don't come with a proper mode causing
issues in the kernel when we want to add useful VFS debug assert.
Fix that by giving them a proper mode and masking it off when we
report it to userspace which relies on them not having any mode
- Anonymous inodes currently allow to change inode attributes because
the VFS falls back to simple_setattr() if i_op->setattr isn't
implemented. This means the ownership and mode for every single
user of anon_inode_inode can be changed. Block that as it's either
useless or actively harmful. If specific ownership is needed the
respective subsystem should allocate anonymous inodes from their
own private superblock
- Raise SB_I_NODEV and SB_I_NOEXEC on the anonymous inode superblock
- Add proper tests for anonymous inode behavior
- Make it easy to detect proper anonymous inodes and to ensure that
we can detect them in codepaths such as readahead()
Cleanups:
- Port pidfs to the new anon_inode_{g,s}etattr() helpers
- Try to remove the uselib() system call
- Add unlikely branch hint return path for poll
- Add unlikely branch hint on return path for core_sys_select
- Don't allow signals to interrupt getdents copying for fuse
- Provide a size hint to dir_context for during readdir()
- Use writeback_iter directly in mpage_writepages
- Update compression and mtime descriptions in initramfs
documentation
- Update main netfs API document
- Remove useless plus one in super_cache_scan()
- Remove unnecessary NULL-check guards during setns()
- Add separate separate {get,put}_cgroup_ns no-op cases
Fixes:
- Fix typo in root= kernel parameter description
- Use KERN_INFO for infof()|info_plog()|infofc()
- Correct comments of fs_validate_description()
- Mark an unlikely if condition with unlikely() in
vfs_parse_monolithic_sep()
- Delete macro fsparam_u32hex()
- Remove unused and problematic validate_constant_table()
- Fix potential unsigned integer underflow in fs_name()
- Make file-nr output the total allocated file handles"
* tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (43 commits)
fs: Pass a folio to page_put_link()
nfs: Use a folio in nfs_get_link()
fs: Convert __page_get_link() to use a folio
fs/read_write: make default_llseek() killable
fs/open: make do_truncate() killable
fs/open: make chmod_common() and chown_common() killable
include/linux/fs.h: add inode_lock_killable()
readdir: supply dir_context.count as readdir buffer size hint
vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations
fuse: don't allow signals to interrupt getdents copying
Documentation: fix typo in root= kernel parameter description
include/cgroup: separate {get,put}_cgroup_ns no-op case
kernel/nsproxy: remove unnecessary guards
fs: use writeback_iter directly in mpage_writepages
fs: remove useless plus one in super_cache_scan()
fs: add S_ANON_INODE
fs: remove uselib() system call
device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()
fs/fs_parse: Remove unused and problematic validate_constant_table()
fs: touch up predicts in inode_permission()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount api conversions from Christian Brauner:
"This converts the bfs and omfs filesystems to the new mount api"
* tag 'vfs-6.16-rc1.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
omfs: convert to new mount API
bfs: convert bfs to use the new mount api
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull final writepage conversion from Christian Brauner:
"This converts vboxfs from ->writepage() to ->writepages().
This was the last user of the ->writepage() method. So remove
->writepage() completely and all references to it"
* tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove aops->writepage
mm: Remove swap_writepage() and shmem_writepage()
ttm: Call shmem_writeout() from ttm_backup_backup_page()
i915: Use writeback_iter()
shmem: Add shmem_writeout()
writeback: Remove writeback_use_writepage()
migrate: Remove call to ->writepage
vboxsf: Convert to writepages
9p: Add a migrate_folio method
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs directory lookup updates from Christian Brauner:
"This contains cleanups for the lookup_one*() family of helpers.
We expose a set of functions with names containing "lookup_one_len"
and others without the "_len". This difference has nothing to do with
"len". It's rater a historical accident that can be confusing.
The functions without "_len" take a "mnt_idmap" pointer. This is found
in the "vfsmount" and that is an important question when choosing
which to use: do you have a vfsmount, or are you "inside" the
filesystem. A related question is "is permission checking relevant
here?".
nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
functions. They pass nop_mnt_idmap and refuse to work on filesystems
which have any other idmap.
This work changes nfsd and cachefile to use the lookup_one family of
functions and to explictily pass &nop_mnt_idmap which is consistent
with all other vfs interfaces used where &nop_mnt_idmap is explicitly
passed.
The remaining uses of the "_one" functions do not require permission
checks so these are renamed to be "_noperm" and the permission
checking is removed.
This series also changes these lookup function to take a qstr instead
of separate name and len. In many cases this simplifies the call"
* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: change lookup_one_common and lookup_noperm_common to take a qstr
Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
VFS: rename lookup_one_len family to lookup_noperm and remove permission check
cachefiles: Use lookup_one() rather than lookup_one_len()
nfsd: Use lookup_one() rather than lookup_one_len()
VFS: improve interface for lookup_one functions
|
|
xfstests generic/482 tests the file system consistency after each
FUA operation. It fails when run on exfat.
exFAT clears the volume dirty flag with a FUA operation during sync.
Since s_lock is not held when data is being written to a file, sync
can be executed at the same time. When data is being written to a
file, the FAT chain is updated first, and then the file size is
updated. If sync is executed between updating them, the length of the
FAT chain may be inconsistent with the file size.
To avoid the situation where the file system is inconsistent but the
volume dirty flag is cleared, this commit moves the clearing of the
volume dirty flag from exfat_fs_sync() to exfat_put_super(), so that
the volume dirty flag is not cleared until unmounting. After the
move, there is no additional action during sync, so exfat_fs_sync()
can be deleted.
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The double free could happen in the following path.
exfat_create_upcase_table()
exfat_create_upcase_table() : return error
exfat_free_upcase_table() : free ->vol_utbl
exfat_load_default_upcase_table : return error
exfat_kill_sb()
delayed_free()
exfat_free_upcase_table() <--------- double free
This patch set ->vol_util as NULL after freeing it.
Reported-by: Jianzhou Zhao <xnxc22xnxc22@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
This patch introduces the use of the Intel QAT to offload EROFS data
decompression, aiming to improve the decompression performance.
A 285MiB dataset is used with the following command to create EROFS
images with different cluster sizes:
$ mkfs.erofs -zdeflate,level=9 -C{4096,16384,65536,131072,262144}
Fio is used to test the following read patterns:
$ fio -filename=testfile -bs=4k -rw=read -name=job1
$ fio -filename=testfile -bs=4k -rw=randread -name=job1
$ fio -filename=testfile -bs=4k -rw=randread --io_size=14m -name=job1
Here are some performance numbers for reference:
Processors: Intel(R) Xeon(R) 6766E (144 cores)
Memory: 512 GiB
|-----------------------------------------------------------------------------|
| | Cluster size | sequential read | randread | small randread(5%) |
|-----------|--------------|-----------------|-----------|--------------------|
| Intel QAT | 4096 | 538 MiB/s | 112 MiB/s | 20.76 MiB/s |
| Intel QAT | 16384 | 699 MiB/s | 158 MiB/s | 21.02 MiB/s |
| Intel QAT | 65536 | 917 MiB/s | 278 MiB/s | 20.90 MiB/s |
| Intel QAT | 131072 | 1056 MiB/s | 351 MiB/s | 23.36 MiB/s |
| Intel QAT | 262144 | 1145 MiB/s | 431 MiB/s | 26.66 MiB/s |
| deflate | 4096 | 499 MiB/s | 108 MiB/s | 21.50 MiB/s |
| deflate | 16384 | 422 MiB/s | 125 MiB/s | 18.94 MiB/s |
| deflate | 65536 | 452 MiB/s | 159 MiB/s | 13.02 MiB/s |
| deflate | 131072 | 452 MiB/s | 177 MiB/s | 11.44 MiB/s |
| deflate | 262144 | 466 MiB/s | 194 MiB/s | 10.60 MiB/s |
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250522094931.28956-1-liubo03@inspur.com
[ Gao Xiang: refine the commit message. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Large folios aren't supported without TRANSPARENT_HUGEPAGE
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't unlock a should_be_locked path unless we're in a transaction
restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Different versions differ on the size of the blacklist range; it is
theoretically possible that we could end up with blacklisted journal
sequence numbers newer than the newest seq we find in the journal, and
pick a new start seq that's blacklisted.
Explicitly check for this in bch2_fs_journal_start().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want to change the bucket gen, on gen mismatch: it's possible
to have multiple btree nodes with different gens in the same bucket that
we want to keep, if we have to recover from btree node scan.
It's also not necessary to set g->gen_valid; add a comment to that
effect.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was lost in the giant recovery pass rework - but it's used heavily
by bcachefs subcommand utilities.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we go to allocate and find taht a bucket in the freespace btree is
actually allocated, we're supposed to return nonzero to tell the
allocator to skip it.
This fixes an emergency read only due to a bucket/ptr gen mismatch - we
also don't return the correct bucket gen when this happens.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 010c89468134 ("bcachefs: Check for casefolded dirents in non casefolded dirs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a small set of fixes for the blocking buffer lookup
conversion done earlier this cycle.
It adds a missing conversion in the getblk slowpath and a few minor
optimizations and cleanups"
* tag 'vfs-6.15-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
|
|
According to commit 8f6116b5b77b ("statmount: add a new supported_mask
field"), STATMOUNT_SUPPORTED macro shall be updated whenever a new flag
is added.
Fixes: 7a54947e727b ("Merge patch series "fs: allow changing idmappings"")
Signed-off-by: "Dmitry V. Levin" <ldv@strace.io>
Link: https://lore.kernel.org/20250511224953.GA17849@strace.io
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Not since 8f2918898eb5 "new helpers: vfs_create_mount(), fc_mount()"
back in 2018. Get rid of the dead checks...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250421033509.GV2023217@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some comments in there highlighting a few non-obvious assumptions.
Link: https://lore.kernel.org/20250416-zerknirschen-aluminium-14a55639076f@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If path->should_be_locked is true, that means user code (of the btree
API) has seen, in this transaction, something guarded by the node this
path has locked, and we have to keep it locked until the end of the
transaction.
Assert that we're not violating this; should_be_locked should also be
cleared only in _very_ special situations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Simplify the "do we need to keep this locked?" checks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions: it's going to be illegal
to unlock a should_be_locked path when trans->locked is true.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're adding new should_be_locked assertions, also add a comment
explaining why clearing should_be_locked is safe here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small additional optimization over the previous patch, bringing us
closer to the original behaviour, except when we need to clone to avoid
a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Avoid transaction restarts due to failure to upgrade - we can traverse a
new iterator without a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_path_get_locks, on failure, shouldn't unlock if we're not issuing
a transaction restart: we might drop locks we're not supposed to (if
path->should_be_locked is set).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small helper to improve locking assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_path_put_nokeep() was intended for paths we wouldn't need to
preserve for a transaction restart - it always frees them right away
when the ref hits 0.
But since paths are shared, freeing unconditionally is a bug, the path
might have been used elsewhere and have should_be_locked set, i.e. we
need to keep it locked until the end of the transaction.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Small stuff, main ones users will be interested in:
- Couple more casefolding fixes; we can now detect and repair
casefolded dirents in non-casefolded dir and vice versa
- Fix for massive write inflation with mmapped io, which hit certain
databases"
* tag 'bcachefs-2025-05-22' of git://evilpiepirate.org/bcachefs:
bcachefs: Check for casefolded dirents in non casefolded dirs
bcachefs: Fix bch2_dirent_create_snapshot() for casefolding
bcachefs: Fix casefold opt via xattr interface
bcachefs: mkwrite() now only dirties one page
bcachefs: fix extent_has_stripe_ptr()
bcachefs: Fix bch2_btree_path_traverse_cached() when paths realloced
|
|
Get rid of useless `goto`s. No logic changes.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250522084953.412096-1-hsiangkao@linux.alibaba.com
|
|
Pull smb client fixes from Steve French:
- Two fixes for use after free in readdir code paths
* tag '6.15-rc8-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Reset all search buffer pointers when releasing buffer
smb: client: Fix use-after-free in cifs_fill_dirent
|
|
We need to delay checksumming the journal write; we don't know the
blocksize until after we allocate the write.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Separate tracepoint message generation and other slowpath code into
non-inline functions, and use bch2_trans_log_str() instead of using a
printbuf for our journal message.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The data update path doesn't need a printbuf for its log message - this
will help reduce stack usage.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reduce stack usage - bkey_buf has a 96 byte buffer on the stack, but the
btree_trans bump allocator works just fine here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939a5 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are no longer calling gfs2_find_jhead() on the same log twice, so
there is no more reason for keeping the log contents cached across those
calls. In addition, log head lookup and log header writing didn't go
through the same address space and so the caching wasn't even fully
working, anyway.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Currently at mount time, the recovery code looks up the current log head
and, if necessary, replays the log and writes a recovery header to
indicate that the log is clean. It does that for each log that may need
recovery. We also know that our own log will always be checked as part
of that process. Then, the mount code looks up the log head of our own
log again.
The double log head lookup can be costly, but more importantly, it is
unnecessary because we can trivially compute the position of the log
head after recovery; all we need to do for that is bump the position and
lh_sequence by one when writing a recovery header.
With that in mind, move the call to gfs2_log_pointers_init() into
gfs2_recover_func() and get rid of the double lookup in
gfs2_make_fs_rw().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In function clean_journal(), update @head to point at the log header
that indicates successful recovery: this is where logging needs to
resume.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Move the initialization of sdp->sd_log_sequence and
sdp->sd_log_flush_head inside gfs2_log_pointers_init(). Use
gfs2_replay_incr_blk().
Before this change, the log head lookup code in freeze_go_xmote_bh()
didn't update sdp->sd_log_flush_head. This is now fixed, but the code
in freeze_go_xmote_bh() appears to be pretty useless in the first place:
on a frozen filesystem, the log head will not change.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Move gfs2_log_pointers_init to recovery.c: there is no need for inlining
this function.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Commit 40829760096df ("gfs2: Convert gfs2_find_jhead() to use a folio")
replaced grab_cache_page() by filemap_grab_folio(), but the comments
were still referring to grab_cache_page().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Commit 8d391972ae2d ("gfs2: Remove __gfs2_writepage()") changed the log
flush code in gfs2_ail1_start_one() to call aops->writepages() instead
of aops->writepage(). For jdata inodes, this means that we will now try
to reserve log space and start a transaction before we can determine
that the pages in question have already been journaled. When this
happens in the context of gfs2_logd(), it can now appear that not enough
log space is available for freeing up log space, and we will lock up.
Fix that by issuing journal writes directly instead of going through
aops->writepages() in the log flush code.
Fixes: 8d391972ae2d ("gfs2: Remove __gfs2_writepage()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Move gfs2_trans_add_databufs() to trans.c. Pass in a glock instead of
a gfs2_inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
__get_log_header() was using crc32_le_shift() to update a CRC with four
zero bytes. However, this is about 5x slower than just CRC'ing four
zero bytes in the normal way. Just do that instead.
(We could instead make crc32_le_shift() faster on short lengths. But
all its callers do just fine without it, so I'd like to just remove it.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Since commit eb65540aa9fc ("iomap: warn on zero range of a post-eof
folio"), iomap_zero_range() warns when asked to zero a folio beyond eof.
The warning triggers on the following code path:
gfs2_fallocate(FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE)
__gfs2_punch_hole()
gfs2_block_zero_range()
iomap_zero_range()
In __gfs2_punch_hole(), gfs2 zeroes out partial folios at the beginning
and at the end of the specified range, whether those folios are beyond
eof or not. This may add folios to the page cache which are entirely
beyond eof, which isn't of any use. Avoid that by truncating the range
to zero out at eof.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
__gfs2_jdata_write_folio can't return AOP_WRITEPAGE_ACTIVATE, so don't
check for it in gfs2_write_jdata_batch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When attempting to use an archive file, such as APEX on android,
as a file-backed mount source, it fails because EROFS image within
the archive file does not start at offset 0. As a result, a loop
or a dm device is still needed to attach the image file at an
appropriate offset first. Similarly, if an EROFS image within a
block device does not start at offset 0, it cannot be mounted
directly either.
To address this issue, this patch adds a new mount option `fsoffset=x'
to accept a start offset for the primary device. The offset should be
aligned to the block size. EROFS will add this offset before performing
read requests.
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250517090544.2687651-1-shengyong1@xiaomi.com
[ Gao Xiang: minor update on documentation and the error message. ]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
