summaryrefslogtreecommitdiff
path: root/include/acpi/processor.h
AgeCommit message (Collapse)Author
2019-10-21cpufreq: Use per-policy frequency QoSRafael J. Wysocki
Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-08-28ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifierViresh Kumar
The cpufreq core now takes the min/max frequency constraints via QoS requests and the CPUFREQ_ADJUST notifier shall get removed later on. Switch over to using the QoS request for maximum frequency constraint for acpi driver. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-20ACPI / processor: Finish making acpi_processor_ppc_has_changed() voidBrian Norris
Commit bca5f557dcea "ACPI / processor: Make acpi_processor_ppc_has_changed() void" changed one of the declarations of acpi_processor_ppc_has_changed() to return void, but the !CPU_FREQ version still returns int. Let's return void to be consistent. Fixes: bca5f557dcea "ACPI / processor: Make acpi_processor_ppc_has_changed() void" Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-21xen/acpi: upload _PSD info for non Dom0 CPUs tooJoao Martins
All uploaded PM data from non-dom0 CPUs takes the info from vCPU 0 and changing only the acpi_id. For processors which P-state coordination type is HW_ALL (0xFD) it is OK to upload bogus P-state dependency information (_PSD), because Xen will ignore any cpufreq domains created for past CPUs. Albeit for platforms which expose coordination types as SW_ANY or SW_ALL, this will have some unintended side effects. Effectively, it will look at the P-state domain existence and *if it already exists* it will skip the acpi-cpufreq initialization and thus inherit the policy from the first CPU in the cpufreq domain. This will finally lead to the original cpu not changing target freq to P0 other than the first in the domain. Which will make turbo boost not getting enabled (e.g. for 'performance' governor) for all cpus. This patch fixes that, by also evaluating _PSD when we enumerate all ACPI processors and thus always uploading the correct info to Xen. We export acpi_processor_get_psd() for that this purpose, but change signature to not assume an existent of acpi_processor given that ACPI isn't creating an acpi_processor for non-dom0 CPUs. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21ACPI / processor: Make acpi_processor_ppc_has_changed() voidRafael J. Wysocki
The return value of acpi_processor_ppc_has_changed() is never used, so make it void. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-11-17cpufreq: intel_pstate: Request P-states control from SMM if neededRafael J. Wysocki
Currently, intel_pstate is unable to control P-states on my IvyBridge-based Acer Aspire S5, because they are controlled by SMM on that machine by default and it is necessary to request OS control of P-states from it via the SMI Command register exposed in the ACPI FADT. intel_pstate doesn't do that now, but acpi-cpufreq and other cpufreq drivers for x86 platforms do. Address this problem by making intel_pstate use the ACPI-defined mechanism as well. However, intel_pstate is not modular and it doesn't need the module refcount tricks played by acpi_processor_notify_smm(), so export the core of this function to it as acpi_processor_pstate_control() and make it call that. [The changes in processor_perflib.c related to this should not make any functional difference for the acpi_processor_notify_smm() users]. To be safe, only call acpi_processor_notify_smm() from intel_pstate if ACPI _PPC support is enabled in it. Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-09-19ACPI/processor: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-acpi@vger.kernel.org Cc: rt@linutronix.de Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/20160906170457.32393-12-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-25Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-apei' and 'acpi-sleep'Rafael J. Wysocki
* acpi-processor: ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE * acpi-cppc: mailbox: pcc: Add PCC request and free channel declarations ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data ACPI: CPPC: Return error if _CPC is invalid on a CPU * acpi-apei: ACPI / APEI: Add Boot Error Record Table (BERT) support ACPI / einj: Make error paths more talkative ACPI / einj: Convert EINJ_PFX to proper pr_fmt * acpi-sleep: ACPI: Execute _PTS before system reboot
2016-07-21ACPI / processor_idle: Add support for Low Power Idle(LPI) statesSudeep Holla
ACPI 6.0 introduced an optional object _LPI that provides an alternate method to describe Low Power Idle states. It defines the local power states for each node in a hierarchical processor topology. The OSPM can use _LPI object to select a local power state for each level of processor hierarchy in the system. They used to produce a composite power state request that is presented to the platform by the OSPM. Since multiple processors affect the idle state for any non-leaf hierarchy node, coordination of idle state requests between the processors is required. ACPI supports two different coordination schemes: Platform coordinated and OS initiated. This patch adds initial support for Platform coordination scheme of LPI. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-21ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATESudeep Holla
ACPI 6.0 adds a new method to specify the CPU idle states(C-states) called Low Power Idle(LPI) states. Since new architectures like ARM64 use only LPIs, introduce ACPI_PROCESSOR_CSTATE to encapsulate all the code supporting the old style C-states(_CST). This patch will help to extend the processor_idle module to support LPI. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-30ACPI / processor: Add acpi_map_madt_entry()David Daney
Follow-on arm64 ACPI/NUMA patches need to map MADT entries very early (before kmalloc is usable). Add acpi_map_madt_entry() which, indirectly, uses early_memremap()/early_memunmap() to access the table and parse out the mpidr. The existing implementation of map_madt_entry() is modified to take a pointer to the MADT as a parameter and the callers adjusted. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-22ACPI / sleep: move acpi_processor_sleep to sleep.cSudeep Holla
acpi_processor_sleep is neither related nor used by CPUIdle framework. It's used in system suspend/resume path as a syscore operation. It makes more sense to move it to acpi/sleep.c where all the S-state transition (a.k.a. Linux system suspend/hiberate) related code are present. Also make it depend on CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT so that it's not compiled on architecture like ARM64 where S-states are not yet defined in ACPI. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-22ACPI / processor : add support for ACPI0010 processor containerSudeep Holla
ACPI 6.0 adds support for optional processor container device which may contain child objects that are either processor devices or other processor containers. This allows representing hierarchical processor topologies. It is declared using the _HID of ACPI0010. It is an abstract container used to represent CPU topology and should not be used to hotplug purposes. If no matching handler is found for a device in acpi_scan_attach_handler, acpi_bus_attach does a default enumeration for those devices with valid HID in the acpi namespace. This patch adds a scan handler for these ACPI processor containers to avoid default that enumeration and ensures the platform devices are not created for them. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-12CPPC: Probe for CPPC tables for each ACPI Processor objectAshwin Chaugule
For each detected ACPI Processor object (ACPI0007), search its device handle for CPPC specific tables (i.e. _CPC) and extract CPU specific performance capabilities. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-01Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (53 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings intel_pstate: append more Oracle OEM table id to vendor bypass list intel_pstate: Add SKY-S support intel_pstate: Fix possible overflow complained by Coverity cpufreq: Correct a freq check in cpufreq_set_policy() cpufreq: Lock CPU online/offline in cpufreq_register_driver() cpufreq: Replace recover_policy with new_policy in cpufreq_online() cpufreq: Separate CPU device registration from CPU online cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling ...
2015-08-25ACPI: Decouple ACPI idle and ACPI processor driversAshwin Chaugule
This patch introduces a new Kconfig symbol, ACPI_PROCESSOR_IDLE, which is auto selected by architectures which support the ACPI based C states for CPU Idle management. The processor_idle driver in its present form contains declarations specific to X86 and IA64. Since there are no reasonable defaults for other architectures e.g. ARM64, the driver is selected only for X86 or IA64. This helps in decoupling the ACPI processor_driver from the ACPI processor_idle driver which is useful for the upcoming alternative patchwork for controlling CPU Performance (CPPC) and CPU Idle (LPI). Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPI: Split out ACPI PSS from ACPI Processor driverAshwin Chaugule
The ACPI processor driver is currently tied too closely to the ACPI P-states (PSS) and other related constructs for controlling CPU performance. The newer ACPI specification (v5.1 onwards) introduces alternative methods to PSS. These new mechanisms are described within each ACPI Processor object and so they need to be scanned whenever a new Processor object is detected. This patch introduces a new Kconfig symbol to allow for finer configurability among the two options for controlling performance states. There is no change in functionality and the option is auto-selected by the architectures which support it. A future commit will introduce support for CPPC: A newer method of controlling CPU performance. The OS is not expected to support CPPC and PSS at the same time, so the Kconfig option lets us make the two mutually exclusive at compile time. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-22ACPI / processor: Drop an unused argument of a cleanup routineRafael J. Wysocki
acpi_processor_unregister_performance() actually doesn't use its first argument, so drop it and update the callers accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-03-26ACPI / processor: Introduce phys_cpuid_t for CPU hardware IDCatalin Marinas
CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor, but phys_id is used as int in acpi processor driver, so it will lead to some inconsistence for the drivers. Furthermore, to cater for ACPI arch ports that implement 64 bits CPU ids a generic CPU physical id type is required. So introduce typedef u32 phys_cpuid_t in a common file, and introduce a macro PHYS_CPUID_INVALID as (phys_cpuid_t)(-1) if it's not defined by other archs, this will solve the inconsistence in acpi processor driver, and will prepare for the ACPI on ARM64 for the 64 bit CPU hardware ID in the following patch. CC: Rafael J Wysocki <rjw@rjwysocki.net> Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [hj: reworked cpu physid map return codes] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-01-05ACPI / processor: Convert apic_id to phys_id to make it arch agnosticHanjun Guo
apic_id in MADT table is the CPU hardware id which identify it self in the system for x86 and ia64, OSPM will use it for SMP init to map APIC ID to logical cpu number in the early boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the ACPI processor driver is probed and the driver will use acpi_id in DSDT to get the apic_id, then map to the logical cpu number which is needed by the processor driver. Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec, so apic_id is used both in arch code and ACPI core which is pretty fine. Since ACPI 5.0, ARM is supported by ACPI and APIC is not available on ARM, this will confuse people when apic_id is both used by x86 and ARM in one function. So convert apic_id to phys_id (which is the original meaning) in ACPI processor dirver to make it arch agnostic, but leave the arch dependent code unchanged, no functional change. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-25ACPI / processor: remove unused variabled from acpi_processor_power structureSudeep Holla
Few elements in the acpi_processor_power structure are unused. It could be remnant in the header missed while the code got removed from the corresponding driver file. This patch removes those unused variables in the structure declaration. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-11ACPI / processor: Update the comments in processor.hHanjun Guo
In commit 46ba51e (ACPI / processor: Introduce ARCH_MIGHT_HAVE_ACPI_PDC), acpi_processor_set_pdc() was moved to processor_pdc.c, so update the comments accordingly. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-17ACPI / processor replace __attribute__((packed)) by __packedFabian Frederick
This patch fixes checkpatch warnings: "WARNING: __packed is preferred over __attribute__((packed))" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30ACPI / processor: Do not request ACPI cpufreq module directlyRafael J. Wysocki
Function acpi_processor_load_module() used by the ACPI processor driver can only really work if the acpi-cpufreq module is available when acpi_processor_start() is executed which usually is not the case for systems loading the processor driver module from an initramfs. Moreover, that used to be a hackish workaround for module autoloading issues, but udev loads acpi-cpufreq just fine nowadays, so that function isn't really necessary any more. For this reason, drop acpi_processor_load_module() entirely. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24ACPI / processor: Introduce apic_id in struct processor to save parsed APIC idJiang Liu
For cpu hot add, we evaluate _MAT or parse MADT twice to get APIC id, here is the code logic: acpi_processor_add() acpi_processor_get_info() acpi_get_cpuid() will evaluate _MAT or parse MADT; acpi_processor_hotadd_init() acpi_map_lsapic() will evaluate _MAT again; This can be done more effectively, this patch introduces apic_id in struct processor to save parsed APIC id, and then we can use it and remove the duplicated _MAT evaluation. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-12ACPI / processor: Use common hotplug infrastructureRafael J. Wysocki
Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-12ACPI / PM: Move processor suspend/resume to syscore_opsRafael J. Wysocki
The system suspend routine of the ACPI processor driver saves the BUS_MASTER_RLD register and its resume routine restores it. However, there can be only one such register in the system and it really should be saved after non-boot CPUs have been offlined and restored before they are put back online during resume. For this reason, move the saving and restoration of BUS_MASTER_RLD to syscore suspend and syscore resume, respectively, and drop the no longer necessary suspend/resume callbacks from the ACPI processor driver. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-06acpi: Export the acpi_processor_get_performance_infoKonrad Rzeszutek Wilk
The git commit d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 (cpufreq: handle cpufreq being disabled for all exported function) tightens the cpufreq API by returning errors when disable_cpufreq() had been called. The problem we are hitting is that the module xen-acpi-processor which uses the ACPI's functions: acpi_processor_register_performance, acpi_processor_preregister_performance, and acpi_processor_notify_smm fails at acpi_processor_register_performance with -22. Note that earlier during bootup in arch/x86/xen/setup.c there is also an call to cpufreq's API: disable_cpufreq(). This is b/c we want the Linux kernel to parse the ACPI data, but leave the cpufreq decisions to the hypervisor. In v3.9 all the checks that d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 added are now hit and the calls to cpufreq_register_notifier will now fail. This means that acpi_processor_ppc_init ends up printing: "Warning: Processor Platform Limit not supported" and the acpi_processor_ppc_status is not set. The repercussions of that is that the call to acpi_processor_register_performance fails right away at: if (!(acpi_processor_ppc_status & PPC_REGISTERED)) and we don't progress any further on parsing and extracting the _P* objects. The only reason the Xen code called that function was b/c it was exported and the only way to gather the P-states. But we can also just make acpi_processor_get_performance_info be exported and not use acpi_processor_register_performance. This patch does so. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-17cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power ↵Daniel Lezcano
structure Currently we have the cpuidle_device field in the acpi_processor_power structure. This adds a dependency between processor.h and cpuidle.h Although it is not a real problem, removing this dependency has the benefit of separating a bit more the cpuidle code from the rest of the acpi code. Also, the compilation should be a bit improved because we do no longer include cpuidle.h in processor.h. The preprocessor was generating 30418 loc and with this patch it generates 30256 loc for processor_thermal.c, a file which is not concerned at all by cpuidle, like processor_perflib.c and processor_throttling.c. That may sound ridiculous, but "small streams make big rivers" :P This patch moves this field into a static global per cpu variable like what is done in the intel_idle driver. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-15ACPI / processor: remove unused function parameterDaniel Lezcano
The 'device' parameter is not used neither in acpi_processor_power_init and acpi_processor_power_exit. This patch removes it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-05cpuidle / ACPI : remove power from acpi_processor_cx structureDaniel Lezcano
Remove the unused power field from struct struct acpi_processor_cx. [rjw: Modified changelog.] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-19Merge branch 'pm-acpi'Rafael J. Wysocki
* pm-acpi: (24 commits) olpc-xo15-sci: Use struct dev_pm_ops for power management ACPI / PM: Drop PM callbacks from the ACPI bus type ACPI / PM: Drop legacy driver PM callbacks that are not used any more ACPI / PM: Do not execute legacy driver PM callbacks acpi_power_meter: Use struct dev_pm_ops for power management fujitsu-tablet: Use struct dev_pm_ops for power management classmate-laptop: Use struct dev_pm_ops for power management xo15-ebook: Use struct dev_pm_ops for power management toshiba_bluetooth: Use struct dev_pm_ops for power management panasonic-laptop: Use struct dev_pm_ops for power management sony-laptop: Use struct dev_pm_ops for power management hp_accel: Use struct dev_pm_ops for power management toshiba_acpi: Use struct dev_pm_ops for power management ACPI: Use struct dev_pm_ops for power management in the SBS driver ACPI: Use struct dev_pm_ops for power management in the power driver ACPI: Use struct dev_pm_ops for power management in the button driver ACPI: Use struct dev_pm_ops for power management in the battery driver ACPI: Use struct dev_pm_ops for power management in the AC driver ACPI: Use struct dev_pm_ops for power management in processor driver ACPI: Use struct dev_pm_ops for power management in the thermal driver ...
2012-07-17cpuilde / ACPI: remove time from acpi_processor_cx structureDaniel Lezcano
Remove the time field as it is not used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-17cpuidle / ACPI: remove usage from acpi_processor_cx structureDaniel Lezcano
Remove the usage field as it is not used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-17cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structureDaniel Lezcano
Remove the latency_ticks field as it is not used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01ACPI: Use struct dev_pm_ops for power management in processor driverRafael J. Wysocki
Make the ACPI processor driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct acpi_device_ops. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01ACPI / PM: Drop pm_message_t argument from device suspend callbackRafael J. Wysocki
None of the drivers implementing the ACPI device suspend callback uses the pm_message_t argument of it, so this argument may be dropped entirely from that callback. This will simplify switching the ACPI bus type to PM handling based on struct dev_pm_ops. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-02-02Merge 3.3-rc2 into the driver-core-next branch.Greg Kroah-Hartman
This was done to resolve a merge and build problem with the drivers/acpi/processor_driver.c file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-26ACPI: Load acpi-cpufreq from processor driver automaticallyAndi Kleen
The only left over hole in automatic cpufreq driver loading was the loading of ACPI cpufreq. This driver should be loaded when ACPI supports a _PDC method and the CPU vendor wants to use acpi cpufreq. Simply add a request module call to the acpi processor core driver when this is true. This seems like the simplest solution for this. Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-19ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged coresThomas Renninger
Delay the setting up of features (cpuidle, throttling by calling acpi_processor_start()) to the time when the hotplugged core got onlined the first time and got fully initialized. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Single/Global registration of idle statesDeepthi Dharwar
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-16ACPI: constify ops structsVasiliy Kulikov
Structs battery_file, acpi_dock_ops, file_operations, thermal_cooling_device_ops, thermal_zone_device_ops, kernel_param_ops are not changed in runtime. It is safe to make them const. register_hotplug_dock_device() was altered to take const "ops" argument to respect acpi_dock_ops' const notion. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-29ACPI: processor: fix processor_physically_present in UP kernelLin Ming
Usually, there are multiple processors defined in ACPI table, for example Scope (_PR) { Processor (CPU0, 0x00, 0x00000410, 0x06) {} Processor (CPU1, 0x01, 0x00000410, 0x06) {} Processor (CPU2, 0x02, 0x00000410, 0x06) {} Processor (CPU3, 0x03, 0x00000410, 0x06) {} } processor_physically_present(...) will be called to check whether those processors are physically present. Currently we have below codes in processor_physically_present, cpuid = acpi_get_cpuid(...); if ((cpuid == -1) && (num_possible_cpus() > 1)) return false; return true; In UP kernel, acpi_get_cpuid(...) always return -1 and num_possible_cpus() always return 1, so processor_physically_present(...) always returns true for all passed in processor handles. This is wrong for UP processor or SMP processor running UP kernel. This patch removes the !SMP version of acpi_get_cpuid(), so both UP and SMP kernel use the same acpi_get_cpuid function. And for UP kernel, only processor 0 is valid. https://bugzilla.kernel.org/show_bug.cgi?id=16548 https://bugzilla.kernel.org/show_bug.cgi?id=16357 Tested-by: Anton Kochkov <anton.kochkov@gmail.com> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-10ACPI: Reevaluate whether the T-state is supported or not after cpu is ↵Zhao Yakui
online/offline After one CPU is offlined, it is unnecessary to switch T-state for it. So it will be better that the throttling is disabled after the cpu is offline. At the same time after one cpu is online, we should check whether the T-state is supported and then set the corresponding T-state flag. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI processor: remove deprecated ACPI procfs I/FZhang Rui
Remove deprecated ACPI processor procfs I/F, including: /proc/acpi/processor/CPUX/power /proc/acpi/processor/CPUX/limit /proc/acpi/processor/CPUX/info /proc/acpi/processor/CPUX/throttling still exists, as we don't have sysfs I/F available for now. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-22ACPI: skip checking BM_STS if the BIOS doesn't ask for itLen Brown
It turns out that there is a bit in the _CST for Intel FFH C3 that tells the OS if we should be checking BM_STS or not. Linux has been unconditionally checking BM_STS. If the chip-set is configured to enable BM_STS, it can retard or completely prevent entry into deep C-states -- as illustrated by turbostat: http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/ ref: Intel Processor Vendor-Specific ACPI Interface Specification table 4 "_CST FFH GAS Field Encoding" Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state https://bugzilla.kernel.org/show_bug.cgi?id=15886 Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-21ACPI: delete unused c-state promotion/demotion data strucuturesLen Brown
These were used before cpuidle by the native ACPI idle driver, which tracked promotion and demotion between states. The code was referenced by CONFIG_ACPI_PROCFS for /proc/acpi/processor/*/power, but as we no longer do promotion/demotion, that reference has been a NOP since the transition. Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: export acpi_get_cpuid()Alex Chiang
Rename static get_cpu_id() to acpi_get_cpuid() and export it. This change also gives us an opportunity to remove the #ifndef CONFIG_SMP from processor_driver.c and into a header file where it properly belongs. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: mv processor_pdc.c processor_core.cAlex Chiang
We've renamed the old processor_core.c to processor_driver.c, to convey the idea that it can be built modular and has driver-like bits. Now let's re-create a processor_core.c for the bits needed statically by the rest of the kernel. The contents of processor_pdc.c are a good starting spot, so let's just rename that file and complete our three card monte. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>