| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
|
Alternatively to the X9.62 encoding of ecdsa signatures, which uses
ASN.1 and is already supported by the kernel, there's another common
encoding called P1363. It stores r and s as the concatenation of two
big endian, unsigned integers. The name originates from IEEE P1363.
Add a P1363 template in support of the forthcoming SPDM library
(Security Protocol and Data Model) for PCI device authentication.
P1363 is prescribed by SPDM 1.2.1 margin no 44:
"For ECDSA signatures, excluding SM2, in SPDM, the signature shall be
the concatenation of r and s. The size of r shall be the size of
the selected curve. Likewise, the size of s shall be the size of
the selected curve. See BaseAsymAlgo in NEGOTIATE_ALGORITHMS for
the size of r and s. The byte order for r and s shall be in big
endian order. When placing ECDSA signatures into an SPDM signature
field, r shall come first followed by s."
Link: https://www.dmtf.org/sites/default/files/standards/documents/DSP0274_1.2.1.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Unlike the rsa driver, which separates signature decoding and
signature verification into two steps, the ecdsa driver does both in one.
This restricts users to the one signature format currently supported
(X9.62) and prevents addition of others such as P1363, which is needed
by the forthcoming SPDM library (Security Protocol and Data Model) for
PCI device authentication.
Per Herbert's suggestion, change ecdsa to use a "raw" signature encoding
and then implement X9.62 and P1363 as templates which convert their
respective encodings to the raw one. One may then specify
"x962(ecdsa-nist-XXX)" or "p1363(ecdsa-nist-XXX)" to pick the encoding.
The present commit moves X9.62 decoding to a template. A separate
commit is going to introduce another template for P1363 decoding.
The ecdsa driver internally represents a signature as two u64 arrays of
size ECC_MAX_BYTES. This appears to be the most natural choice for the
raw format as it can directly be used for verification without having to
further decode signature data or copy it around.
Repurpose all the existing test vectors for "x962(ecdsa-nist-XXX)" and
create a duplicate of them to test the raw encoding.
Link: https://lore.kernel.org/all/ZoHXyGwRzVvYkcTP@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Add comment to ecc_digits_from_bytes kdoc that the first byte is expected
to hold the most significant bits of the large integer that is converted
into an array of digits.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Prevent ecc_digits_from_bytes from reading too many bytes from the input
byte array in case an insufficient number of bytes is provided to fill the
output digit array of ndigits. Therefore, initialize the most significant
digits with 0 to avoid trying to read too many bytes later on. Convert the
function into a regular function since it is getting too big for an inline
function.
If too many bytes are provided on the input byte array the extra bytes
are ignored since the input variable 'ndigits' limits the number of digits
that will be filled.
Fixes: d67c96fb97b5 ("crypto: ecdsa - Convert byte arrays with key coordinates to digits")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The private key in ctx->private_key is currently initialized in reverse
byte order in ecdh_set_secret and whenever the key is needed in proper
byte order the variable priv is introduced and the bytes from
ctx->private_key are copied into priv while being byte-swapped
(ecc_swap_digits). To get rid of the unnecessary byte swapping initialize
ctx->private_key in proper byte order and clean up all functions that were
previously using priv or were called with ctx->private_key:
- ecc_gen_privkey: Directly initialize the passed ctx->private_key with
random bytes filling all the digits of the private key. Get rid of the
priv variable. This function only has ecdh_set_secret as a caller to
create NIST P192/256/384 private keys.
- crypto_ecdh_shared_secret: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
- ecc_make_pub_key: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
Cc: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Implement vli_mmod_fast_521 following the description for how to calculate
the modulus for NIST P521 in the NIST publication "Recommendations for
Discrete Logarithm-Based Cryptography: Elliptic Curve Domain Parameters"
section G.1.4.
NIST p521 requires 9 64bit digits, so increase the ECC_MAX_DIGITS so that
the vli digit array provides enough elements to fit the larger integers
required by this curve.
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For NIST P192/256/384 the public key's x and y parameters could be copied
directly from a given array since both parameters filled 'ndigits' of
digits (a 'digit' is a u64). For support of NIST P521 the key parameters
need to have leading zeros prepended to the most significant digit since
only 2 bytes of the most significant digit are provided.
Therefore, implement ecc_digits_from_bytes to convert a byte array into an
array of digits and use this function in ecdsa_set_pub_key where an input
byte array needs to be converted into digits.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Export the following additional ECC helper functions:
- ecc_alloc_point()
- ecc_free_point()
- vli_num_bits()
- ecc_point_is_zero()
This is done to allow future ECC device drivers to re-use existing code,
thus simplifying their implementation.
Functions are exported using EXPORT_SYMBOL() (instead of
EXPORT_SYMBOL_GPL()) to be consistent with the functions already
exported by crypto/ecc.c.
Exported functions are documented in include/crypto/internal/ecc.h.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move ecc.h header file to 'include/crypto/internal' so that it can be
easily imported from everywhere in the kernel tree.
This change is done to allow crypto device drivers to re-use the symbols
exported by 'crypto/ecc.c', thus avoiding code duplication.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
