| Age | Commit message (Collapse) | Author |
|---|
|
The HDMI Connectors need to perform a variety of tasks when the HDMI
connector state changes. Such tasks include setting or invalidating CEC
address, notifying HDMI codec driver, updating scrambler data, etc.
Implementing such tasks in a driver-specific callbacks is error prone.
Start implementing the generic helper function (currently handling only
the HDMI Codec framework) to be used by drivers utilizing HDMI Connector
framework.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-6-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Several DRM drivers implement HDMI codec support (despite its name it
applies to both HDMI and DisplayPort drivers). Implement generic
framework to be used by these drivers. This removes a requirement to
implement get_eld() callback and provides default implementation for
codec's plug handling.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-3-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Atm when the connector is added to the drm_mode_config::connector_list,
the connector may not be fully initialized yet. This is not a problem
for static connectors initialized/added during driver loading, for which
the driver ensures that look-ups via the above list are not possible
until all the connector and other required state is fully initialized
already. It's also not a problem for user space looking up either a
static or dynamic (see what this is below) connector, since this will be
only possible once the connector is registered.
A dynamic - atm only a DP MST - connector can be initialized and added
after the load time initialization is done. Such a connector may be
looked up by in-kernel users once it's added to the connector list. In
particular a hotplug handler could perform a detection on all the
connectors on the list and hence find a connector there which isn't yet
initialized. For instance the connector's helper hooks may be unset,
leading to a NULL dereference while the detect helper calls the
connector's drm_connector_helper_funcs::detect() or detect_ctx()
handler.
To resolve the above issue, add a way for dynamic connectors to
separately initialize the DRM core specific parts of the connector
without adding it to the connector list - by calling the new
drm_connector_dynamic_init() - and to add the connector to the list
later once all the initialization is complete and the connector is
registered - by calling the new drm_connector_dynamic_register().
Adding the above 2 functions was also motivated to make the distinction
of the interface between static and dynamic connectors clearer: Drivers
should manually initialize and register only dynamic connectors (with
the above 2 functions). A driver should only initialize a static
connector (with one of the drm_connector_init*, drmm_connector_init*
functions) while the registration of the connector will be done
automatically by DRM core.
v2: (Jani)
- Let initing DDC as well via drm_connector_init_core().
- Rename __drm_connector_init to drm_connector_init_core_and_add().
v3:
- Rename drm_connector_init_core() to drm_connector_dynamic_init().
(Sima)
- Instead of exporting drm_connector_add(), move adding the connector
to the registration step via a new drm_connector_dynamic_register().
(Sima)
- Update drm_connector_dynamic_init()'s function documentation and the
commit log according to the above changes.
- Update the commit log describing the problematic scenario during
connector detection. (Maxime)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-2-imre.deak@intel.com
|
|
The connector->eld is accessed by the .get_eld() callback. This access
can collide with the drm_edid_to_eld() updating the data at the same
time. Add drm_connector.eld_mutex to protect the data from concurrenct
access. Individual drivers are not updated (to reduce possible issues
while applying the patch), maintainers are to find a best suitable way
to lock that mutex while accessing the ELD data.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-1-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This reverts commit 76299a557f36d624ca32500173ad7856e1ad93c0.
It was merged without meeting userspace requirements.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802145946.48073-1-hamza.mahfooz@amd.com
|
|
The `power saving policy` DRM property is an optional property that
can be added to a connector by a driver.
This property is for compositors to indicate intent of policy of
whether a driver can use power saving features that may compromise
the experience intended by the compositor.
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703051722.328-2-mario.limonciello@amd.com
|
|
The initial idea of the Colorspace prop was that this maps 1:1 to
InfoFrames/SDP but KMS does not give user space enough information nor
control over the output format to figure out which variants can be used
for a given KMS commit. At the same time, properties like Broadcast RGB
expect full range quantization range being produced by user space from
the CRTC and drivers to convert to the range expected by the sink for
the chosen output format, mode, InfoFrames, etc.
This change documents the reality of the Colorspace property. The
Default variant unfortunately is very much driver specific and not
reflected by the EDID. The BT2020 variants are in active use by generic
compositors which have expectations from the driver about the
conversions it has to do when selecting certain output formats.
Everything else is also marked as undefined. Coming up with valid
behavior that makes it usable from user space and consistent with other
KMS properties for those variants is left as an exercise for whoever
wants to use them.
v2:
* Talk about "pixel operation properties" that user space configures
* Mention that user space is responsible for checking the EDID for sink
support
* Make it clear that drivers can choose between RGB and YCbCr on their
own
Signed-off-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702143017.2429975-1-sebastian.wick@redhat.com
|
|
Add this as a value for enum_drm_connector_tv_mode, represented
by the string "Mono", to generate video with no colour encoding
or bursts. Define it to have no pedestal (since only NTSC-M calls
for a pedestal).
Change default mode creation to acommodate the new tv_mode value
which comprises both 525-line and 625-line formats.
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216184857.245372-2-dave.stevenson@raspberrypi.com
|
|
It looks like the documentation for the HDMI-related fields recently
added to both the drm_connector and drm_connector_state structures
trigger some warnings because of their use of anonymous structures:
$ scripts/kernel-doc -none include/drm/drm_connector.h
include/drm/drm_connector.h:1138: warning: Excess struct member 'broadcast_rgb' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'infoframes' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'avi' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'hdr_drm' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'spd' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'vendor' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'is_limited_range' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'output_bpc' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'output_format' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'tmds_char_rate' description in 'drm_connector_state'
include/drm/drm_connector.h:2112: warning: Excess struct member 'vendor' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'product' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'supported_formats' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'infoframes' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'lock' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'audio' description in 'drm_connector'
Create some intermediate structures instead of anonymous ones to silence
the warnings.
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 54cb39e2293b ("drm/connector: hdmi: Create an HDMI sub-state")
Fixes: 948f01d5e559 ("drm/connector: hdmi: Add support for output format")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610111200.428224-1-mripard@kernel.org
|
|
Infoframes in KMS is usually handled by a bunch of low-level helpers
that require quite some boilerplate for drivers. This leads to
discrepancies with how drivers generate them, and which are actually
sent.
Now that we have everything needed to generate them in the HDMI
connector state, we can generate them in our common logic so that
drivers can simply reuse what we precomputed.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-22-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
HDMI controller drivers will need to figure out the RGB range they need
to configure based on a mode and property values. Let's expose that in
the HDMI connector state so drivers can just use that value.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-20-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The i915 driver has a property to force the RGB range of an HDMI output.
The vc4 driver then implemented the same property with the same
semantics. KWin has support for it, and a PR for mutter is also there to
support it.
Both drivers implementing the same property with the same semantics,
plus the userspace having support for it, is proof enough that it's
pretty much a de-facto standard now and we can provide helpers for it.
Let's plumb it into the newly created HDMI connector.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-18-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Most of the HDMI controllers have an upper TMDS character rate limit
they can't exceed. On "embedded"-grade display controllers, it will
typically be lower than what high-grade monitors can provide these days,
so drivers will filter the TMDS character rate based on the controller
capabilities.
To make that easier to handle for drivers, let's provide an optional
hook to be implemented by drivers so they can tell the HDMI controller
helpers if a given TMDS character rate is reachable for them or not.
This will then be useful to figure out the best format and bpc count for
a given mode.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-13-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Most HDMI drivers have some code to calculate the TMDS character rate,
usually to adjust an internal clock to match what the mode requires.
Since the TMDS character rates mostly depends on the resolution, whether
we need to repeat pixels or not, the bpc count and the format, we can
now derive it from the HDMI connector state that stores all those infos
and remove the duplication from drivers.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-11-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Just like BPC, we'll add support for automatic selection of the output
format for HDMI connectors.
Let's add the needed defaults and fields for now.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-7-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
We'll add automatic selection of the output BPC in a following patch,
but let's add it to the HDMI connector state already.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-4-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The next features we will need to share across drivers will need to
store some parameters for drivers to use, such as the selected output
format.
Let's create a new connector sub-state dedicated to HDMI controllers,
that will eventually store everything we need.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-3-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
A lot of the various HDMI drivers duplicate some logic that depends on
the HDMI spec itself and not really a particular hardware
implementation.
Output BPC or format selection, infoframe generation are good examples
of such areas.
This creates a lot of boilerplate, with a lot of variations, which makes
it hard for userspace to rely on, and makes it difficult to get it right
for drivers.
In the next patches, we'll add a lot of infrastructure around the
drm_connector and drm_connector_state structures, which will allow to
abstract away the duplicated logic. This infrastructure comes with a few
requirements though, and thus we need a new initialization function.
Hopefully, this will make drivers simpler to handle, and their behaviour
more consistent.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-1-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Accessing the EDID via edid_blob_ptr causes chicken-and-egg
problems. Keep edid_blob_ptr as the userspace interface that should be
accessed via dedicated functions.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b6aa1ea30ae85ef9e9814315d3437e82f0ba6754.1715353572.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In some implementations, such as the Qualcomm platforms, the display
driver has no way to query the current HPD state and as such it's
impossible to distinguish between disconnect and attention events.
Add a parameter to drm_connector_oob_hotplug_event() to pass the HPD
state.
Also push the test for unchanged state in the displayport altmode driver
into the i915 driver, to allow other drivers to act upon each update.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009174048.2695981-2-dmitry.baryshkov@linaro.org
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull for v6.7:
Features and functionality:
- Early Xe2 LPD / Lunarlake (LNL) display enabling (Lucas, Matt, Gustavo,
Stanislav, Luca, Clint, Juha-Pekka, Balasubramani, Ravi)
- Plenty of various DSC improvements and fixes (Ankit)
- Add DSC PPS state readout and verification (Suraj)
- Improve fastsets for VRR, LRR and M/N updates (Ville)
- Use connector->ddc to create (non-DP MST) connector sysfs ddc symlinks (Ville)
- Various DSB improvements, load LUTs using DSB (Ville)
- Improve shared link bandwidth management, starting with FDI (Imre)
- Optimize get param ioctl for PXP status (Alan)
- Remove DG2 pre-production hardware workarounds (Matt)
- Add more RPL P/U PCI IDs (Dnyaneshwar)
- Add new DG2-G12 stepping (Swati)
- Add PSR sink error status to debugfs (Jouni)
- Add DP enhanced framing to crtc state checker (Ville)
Refactoring and cleanups:
- Simplify TileY/Tile4 tiling selftest enumeration (Matt)
- Remove some unused power domain code (Gustavo)
- Check stepping of display IP version rather than MTL platform (Matt)
- DP audio compute config cleanups (Vinod)
- SDVO cleanups and refactoring, more robust failure handling (Ville)
- Color register definition and readout cleanups (Jani)
- Reduce header interdependencies for frontbuffer tracking (Jani)
- Continue replacing struct edid with struct drm_edid (Jani)
- Use source physical address instead of EDID for CEC (Jani)
- Clean up Type-C port lane count functions (Luca)
- Clean up DSC PPS register definitions and readout (Jani)
- Stop using GEM_BUG_ON()/GEM_WARN_ON() in display code (Jani)
- Move more of the display probe to display code (Jani)
- Remove redundant runtime suspended state flag (Jouni)
- Move display info printing to display code (Balasubramani)
- Frontbuffer tracking improvements (Jouni)
- Add trailing newlines to debug logging (Jim Cromie)
- Separate display workarounds from clock gating init (Matt)
- Reduce dmesg log spamming for combo PHY, PLL state, FEC, DP MST (Ville, Imre)
Fixes:
- Fix hotplug poll detect loops via suspend/resume (Imre)
- Fix hotplug detect for forced connectors (Imre)
- Fix DSC first_line_bpg_offset calculation (Suraj)
- Fix debug prints for SDP CRC16 (Arun)
- Fix PXP runtime resume (Alan)
- Fix cx0 PHY lane handling (Gustavo)
- Fix frontbuffer tracking locking in debugfs (Juha-Pekka)
- Fix SDVO detect on some models (Ville)
- Fix SDP split configuration for DP MST (Vinod)
- Fix AUX usage and reads for HDCP on DP MST (Suraj)
- Fix PSR workaround (Jouni)
- Fix redundant AUX power get/put in DP force (Imre)
- Fix ICL DSI TCLK POST by letting hardware handle it (William)
- Fix IRQ reset for XE LP+ (Gustavo)
- Fix h/vsync_end instead of h/vtotal in VBT (Ville)
- Fix C20 PHY msgbus timeout issues (Gustavo)
- Fix pre-TGL FEC pipe A vs. DDI A mixup (Ville)
- Fix FEC state readout for DP MST (Ville)
DRM subsystem core changes:
- Assume sink supports 8 bpc when DSC is supported (Ankit)
- Add drm_edid_is_digital() helper (Jani)
- Parse source physical address from EDID (Jani)
- Add function to attach CEC without EDID (Jani)
- Reorder connector sysfs/debugfs remove (Ville)
- Register connector sysfs ddc symlink later (Ville)
Media subsystem changes:
- Add comments about CEC source physical address usage (Jani)
Merges:
- Backmerge drm-next to get v6.6-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_drv.h
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0mhi7a6.fsf@intel.com
|
|
The drm_colorspace enum member DRM_MODE_COLORIMETRY_COUNT has been
properly documented by moving the description out of the enum to the
member description list to get rid of an additional warning and improve
documentation clarity.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-topic-drm_connector_doc-v2-1-1f2dcaa43269@gmail.com
|
|
CEC needs the source physical address. Parsing it is trivial with the
existing EDID CEA DB infrastructure.
Default to CEC_PHYS_ADDR_INVALID (0xffff) instead of 0 to cater for
easier CEC usage.
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: linux-media@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/8c6b6403932536b6849e0b44e1ee6e7ebdbe4a69.1692884619.git.jani.nikula@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.5-2023-06-02:
amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero
ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
UAPI:
- Add new ctx query flag to better handle GPU resets
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
amd-drm-next-6.5-2023-06-09:
amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class
amdkfd:
- Add debugger support for gdb
radeon:
- Fix possible UAF
drm:
- Add Colorspace functionality
UAPI:
- Add debugger interface for enabling gdb
Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
|
|
Drivers might not support all colorspaces defined in
dp_colorspaces and hdmi_colorspaces. This results in
undefined behavior when userspace is setting an
unsupported colorspace.
Allow drivers to pass the list of supported colorspaces
when creating the colorspace property.
v2:
- Use 0 to indicate support for all colorspaces (Jani)
- Print drm_dbg_kms message when drivers pass 0
to signal that drivers should specify supported
colorspaecs explicity (Jani)
v3:
- Move changes to create a common colorspace_names array
to separate patch
v6:
- Avoid magic when passing 0 for supported_colorspaces;
be explicit in treating it as "all DP/HDMI"
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v3: Fix kerneldocs (kernel test robot)
v4: Avoid returning NULL from drm_get_colorspace_name
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We an use bitfields to track the support ones for HDMI
and DP. This allows us to print colorspaces in a consistent
manner without needing to know whether we're dealing with
DP or HDMI.
v4:
- Rename _MAX to _COUNT and leave comment to indicate
it's not a valid value
- Fix misplaced function doc
v6:
- Drop magic in drm_mode_create_colorspace_property for
dealing with "0" supported_colorspaces. Expect the caller
to always provide a non-zero supported_colorspaces.
- Improve error checking and logging
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To match the other enums, and add more information about these values.
v2:
- Specify where an enum entry comes from
- Clarify DEFAULT and NO_DATA behavior
- BT.2020 CYCC is "constant luminance"
- correct type for BT.601
v4:
- drop DP/HDMI clarifications that might create
more questions than answers
v5:
- Add note on YCC and RGB variants
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This allows us to use strongly typed arguments.
v2:
- Bring NO_DATA back
- Provide explicit enum values
v3:
- Drop unnecessary '&' from kerneldoc (emersion)
v4:
- Fix Normal Colorimetry comment
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since we already iterate everything that's needed for determining audio,
reduce the need to call drm_detect_monitor_audio() by storing has_audio
to connector info.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/391a93b25c6bcbb39854aaa2813570cfb1580ed9.1685437500.git.jani.nikula@intel.com
|
|
Add documentation for the DRM_MODE_TV_MODE_MAX enumerator to fix the
kernel-doc warning:
include/drm/drm_connector.h:204: warning: Enum value 'DRM_MODE_TV_MODE_MAX' not described in enum 'drm_connector_tv_mode'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504123444.1843795-1-jani.nikula@intel.com
|
|
Although the quirks are internal to EDID parsing, it'll be helpful to
store them in display info to avoid having to pass them around.
This will also help separate adding probed modes (which needs the
quirks) from updating display info.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/819b908f64ad2d158245917f436f24d33a65b95d.1672826282.git.jani.nikula@intel.com
|
|
Now that we have pre-parsed CTA VDB VICs stored in info->vics, leverage
that to simplify CTA Y420CMDB parsing. Move updating the y420_cmdb_modes
bitmap to the display info parsing stage, instead of updating it during
add modes. This allows us to drop the intermediate y420_cmdb_map from
display info, and replace it with a local variable.
This is prerequisite work for overall better separation of the two
parsing steps (updating display info and adding modes).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a0e5e99a83f203b6a8981d263b89b2bb7d2fe15.1672826282.git.jani.nikula@intel.com
|
|
A number of places need access to the VICs. Just parse them early for
easy access. Gracefully handle multiple CTA VDBs. It's unlikely to have
more than one, but the CTA-861 references "Video Data Block(s)", so err
on the safe side.
Start parsing them now, convert users in follow-up to have fewer moving
parts in one go.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7989b2b37837be68953c5d20afd3e93762bfd626.1672826282.git.jani.nikula@intel.com
|
|
Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.
Let's add some code to allow it, and some unit tests to exercise that code.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-8-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.
In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-7-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.
Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.
Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.
We'll then be able to phase out the older tv mode property.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-5-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.
However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-4-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.
Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-2-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter
Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device
Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference
- panels:
- New panel: NewVision NV3051D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
|
|
We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-12-24b168e5bcd5@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.2-2022-11-04:
amdgpu:
- Add TMZ support for GC 11.0.1
- More IP version check conversions
- Mode2 reset fixes for sienna cichlid
- SMU 13.x fixes
- RAS enablement on MP 13.x
- Replace kmap with kmap_local_page()
- Misc Clang warning fixes
- SR-IOV fixes for GC 11.x
- PCI AER fix
- DCN 3.2.x commit sequence rework
- SDMA 4.x doorbell fix
- Expose additional new GC 11.x firmware versions
- Misc code cleanups
- S0i3 fixes
- More DC FPU cleanup
- Add more DC kerneldoc
- Misc spelling and grammer fixes
- DCN 3.1.x fixes
- Plane modifier fix
- MCA RAS enablement
- Secure display locking fix
- RAS TA rework
- RAS EEPROM fixes
- Fail suspend if eviction fails
- Drop AMD specific DSC workarounds in favor of drm EDID quirks
- SR-IOV suspend/resume fixes
- Enable DCN support for ARM
- Enable secure display on DCN 2.1
amdkfd:
- Cache size fixes for GC 10.3.x
- kfd_dev struct cleanup
- GC11.x CWSR trap handler fix
- Userptr fixes
- Warning fixes
radeon:
- Replace kmap with kmap_local_page()
UAPI:
- Expose additional new GC 11.x firmware versions via the existing INFO query
drm:
- Add some new EDID DSC quirks
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104205827.6008-1-alexander.deucher@amd.com
|
|
The LG 27GP950 and LG 27GN950 have visible display corruption when
trying to use 10bpc modes. So, to fix this, cap their maximum DSC
target bitrate to 15bpp.
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Having the EDID override debugfs directly update the EDID property is
problematic. The update is partial only. The driver has no way of
knowing it's been updated. Mode list is not updated. It's an
inconsistent state.
Detach debugfs EDID override from the property update completely. Only
set and reset a separate override EDID copy from debugfs, and have it
take effect only at detect (via EDID read). The copy is at
connector->edid_override, protected by connector->edid_override_mutex.
This also brings override EDID closer to firmware EDID in behaviour.
Add validation of the override EDID which we completely lacked.
Note that IGT already forces a detect whenever tests update the override
EDID.
v2: Add locking (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4c875f8e06c4499f498fcf876e1233cbb155ec8a.1666614699.git.jani.nikula@intel.com
|
|
Let's kick-off this release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The subconnector property was created by drm_mode_create_tv_properties(),
but wasn't exposed to the userspace through the generic
atomic_get/set_property implementation, and wasn't stored in any generic
state structure.
Let's solve this.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-6-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
There is two TV subconnector related properties registered by
drm_mode_create_tv_properties(): subconnector and select subconnector.
While the select subconnector property is stored in the kernel by the
drm_tv_connector_state structure, the subconnector property isn't stored
anywhere.
Worse, the select subconnector property is stored in a field called
subconnector, creating some ambiguity about which property content we're
accessing.
Let's rename that field to one called select_subconnector to make it move
obvious what it's about.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-5-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
|
|
EDID 1.4 introduced some extra flags in the range
descriptor to support min/max h/vfreq >= 255. Consult them
to correctly parse the vfreq limits.
Note that some combinations of the flags are documented
as "reserved" (as are some other values in the descriptor)
but explicitly checking for those doesn't seem particularly
worthwile since we end up with bogus results whether we
decode them or not.
v2: Increase the storage to u16 to make it work (Jani)
Note the "reserved" values situation (Jani)
v3: Document the EDID version number in the defines
Drop some bogus (u8) casts
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6519
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6484
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826213501.31490-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
|
|
Split luminance min/max calculation using static hdr metadata from
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:update_connector_ext_caps
into drm/drm_edid.c and use it during edid parsing. Calculated range is
stored into connector->display_info->luminance_range.
Add new data structure (drm_luminance_range_inf) to store luminance range
calculated using data from EDID's static hdr metadata block. Add this new
struct as a part of drm_display_info struct.
v3: Squashed adding drm_luminance_range_info patch here
v2: Calculate range during edid parsing
Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-2-jouni.hogander@intel.com
|
