summaryrefslogtreecommitdiff
path: root/include/drm
AgeCommit message (Collapse)Author
2020-03-12drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checksLyude Paul
DisplayPort specifications are fun. For a while, it's been really unclear to us what available_pbn actually does. There's a somewhat vague explanation in the DisplayPort spec (starting from 1.2) that partially explains it: The minimum payload bandwidth number supported by the path. Each node updates this number with its available payload bandwidth number if its payload bandwidth number is less than that in the Message Transaction reply. So, it sounds like available_pbn represents the smallest link rate in use between the source and the branch device. Cool, so full_pbn is just the highest possible PBN that the branch device supports right? Well, we assumed that for quite a while until Sean Paul noticed that on some MST hubs, available_pbn will actually get set to 0 whenever there's any active payloads on the respective branch device. This caused quite a bit of confusion since clearing the payload ID table would end up fixing the available_pbn value. So, we just went with that until commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") started breaking people's setups due to us getting erroneous available_pbn values. So, we did some more digging and got confused until we finally looked at the definition for full_pbn: The bandwidth of the link at the trained link rate and lane count between the DP Source device and the DP Sink device with no time slots allocated to VC Payloads, represented as a Payload Bandwidth Number. As with the Available_Payload_Bandwidth_Number, this number is determined by the link with the lowest lane count and link rate. That's what we get for not reading specs closely enough, hehe. So, since full_pbn is definitely what we want for doing bandwidth restriction checks - let's start using that instead and ignore available_pbn entirely. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by: Mikita Lipski <mikita.lipski@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-3-lyude@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2020-02-27drm/shmem: add support for per object caching flags.Gerd Hoffmann
Add map_cached bool to drm_gem_shmem_object, to request cached mappings on a per-object base. Check the flag before adding writecombine to pgprot bits. Cc: stable@vger.kernel.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200226154752.24328-2-kraxel@redhat.com
2020-01-27drm/amdgpu: fix doc by clarifying sched_list definitionNirmoy Das
expand sched_list definition for better understanding. Also fix a typo atleast -> at least Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-18Merge tag 'amd-drm-next-5.6-2020-01-17' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.6-2020-01-17: amdgpu: - Fix 32 bit harder - Powerplay cleanups - VCN fixes for Arcturus - RAS fixes - eDP/DP fixes - SR-IOV fixes - Re-enable S/G display for PCO/RV2 - Free stolen memory after init on gmc10 - DF hashing optimizations for Arcturus - Properly handle runtime pm in sysfs and debugfs - Unify more GC programming between amdgpu and amdkfd - Golden settings updates for gfx10 - GDDR6 training fixes - Freesync fixes - DSC fixes - TMDS fixes - Renoir USB-C fixes - DC dml updates from hw team - Pollock support - Mutex init regresson fix amdkfd: - Unify more GC programming between amdgpu and amdkfd - Use KIQ to setup HIQ rather than using MMIO scheduler: - Documentation fixes - Improve job distribution with load sharing drm: - DP MST fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200117213625.4722-1-alexander.deucher@amd.com
2020-01-16drm/scheduler: fix documentation by replacing rq_list with sched_listNirmoy Das
This also replaces old artifacts with a correct one in drm_sched_entity_init() declaration Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/scheduler: improve job distribution with multiple queuesNirmoy Das
This patch uses score based logic to select a new rq for better loadbalance between multiple rq/scheds instead of num_jobs. Below are test results after running amdgpu_test from mesa drm Before this patch: sched_name num of many times it got scheduled ========= ================================== sdma0 314 sdma1 32 comp_1.0.0 56 comp_1.0.1 0 comp_1.1.0 0 comp_1.1.1 0 comp_1.2.0 0 comp_1.2.1 0 comp_1.3.0 0 comp_1.3.1 0 After this patch: sched_name num of many times it got scheduled ========= ================================== sdma0 216 sdma1 185 comp_1.0.0 39 comp_1.0.1 9 comp_1.1.0 12 comp_1.1.1 0 comp_1.2.0 12 comp_1.2.1 0 comp_1.3.0 12 comp_1.3.1 0 Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-15drm/dp_mst: Have DP_Tx send one msg at a timeWayne Lin
[Why] Noticed this while testing MST with the 4 ports MST hub from StarTech.com. Sometimes can't light up monitors normally and get the error message as 'sideband msg build failed'. Look into aux transactions, found out that source sometimes will send out another down request before receiving the down reply of the previous down request. On the other hand, in drm_dp_get_one_sb_msg(), current code doesn't handle the interleaved replies case. Hence, source can't build up message completely and can't light up monitors. [How] For good compatibility, enforce source to send out one down request at a time. Add a flag, is_waiting_for_dwn_reply, to determine if the source can send out a down request immediately or not. - Check the flag before calling process_single_down_tx_qlock to send out a msg - Set the flag when successfully send out a down request - Clear the flag when successfully build up a down reply - Clear the flag when find erros during sending out a down request - Clear the flag when find errors during building up a down reply - Clear the flag when timeout occurs during waiting for a down reply - Use drm_dp_mst_kick_tx() to try to send another down request in queue at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages in queue when errors occur) Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com
2020-01-15Merge tag 'drm-intel-next-2020-01-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Final drm/i915 features for v5.6: - DP MST fixes (José) - Fix intel_bw_state memory leak (Pankaj Bharadiya) - Switch context id allocation to xarray (Tvrtko) - ICL/EHL/TGL workarounds (Matt Roper, Tvrtko) - Debugfs for LMEM details (Lukasz Fiedorowicz) - Prefer platform acronyms over codenames in symbols (Lucas) - Tiled and port sync mode fixes for fbdev and DP (Manasi) - DSI panel and backlight enable GPIO fixes (Hans de Goede) - Relax audio min CDCLK requirements on non-GLK (Kai Vehmanen) - Plane alignment and dimension check fixes (Imre) - Fix state checks for PSR (José) - Remove ICL+ clock gating programming (José) - Static checker fixes around bool usage (Ma Feng) - Bring back tests for self-contained headers in i915 (Masahiro Yamada) - Fix DP MST disable sequence (Ville) - Start converting i915 to the new drm device based logging macros (Wambui Karuga) - Add DSI VBT I2C sequence execution (Vivek Kasireddy) - Start using function pointers and ops structs in uc code (Michal) - Fix PMU names to not use colons or dashes (Tvrtko) - TGL media decompression support (DK, Imre) - Split i915_gem_gtt.[ch] to more manageable chunks (Matthew Auld) - Create dumb buffers in LMEM where available (Ram) - Extend mmap support for LMEM (Abdiel) - Selftest updates (Chris) - Hack bump up CDCLK on TGL to avoid underruns (Stan) - Use intel_encoder and intel_connector more instead of drm counterparts (Ville) - Build error fixes (Zhang Xiaoxu) - Fixes related to GPU and engine initialization/resume (Chris) - Support for prefaulting discontiguous objects (Abdiel) - Support discontiguous LMEM object maps (Chris) - Various GEM and GT improvements and fixes (Chris) - Merge pinctrl dependencies branch for the DSI GPIO updates (Jani) - Backmerge drm-next for new logging macros (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sgkil0v9.fsf@intel.com
2020-01-13Merge tag 'amd-drm-next-5.6-2020-01-10-dp-mst-dsc' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.6-2020-01-10-dp-mst-dsc: drm: - Add MST helper for PBN calculation of DSC modes - Parse FEC caps on MST ports - Add MST DPCD R/W functions - Add MST helpers for virtual DPCD aux - Add MST HUB quirk - Add MST DSC enablement helpers amdgpu: - Enable MST DSC - Add fair share algo for DSC bandwidth calcs - Fix for 32 bit builds Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110214328.308549-1-alexander.deucher@amd.com
2020-01-13Merge tag 'amd-drm-next-5.6-2020-01-09' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.6-2020-01-09: amdgpu: - Enable DCN support on POWER - Enable GFXOFF for Raven1 refresh - Clean up MM engine idle handlers - HDMI 2.0 audio fixes - Fixes for some 10 bpc EDP panels - Watermark fixes for renoir - SR-IOV fixes - Runtime pm robustness fixes - Arcturus VCN fixes - RAS fixes - BACO fixes for Arcturus - Stable pstate fixes for swSMU - HDCP fixes - PSP cleanup - HDMI fixes - Misc cleanups amdkfd: - Spread interrupt work across cores to reduce latency - Topology fixes for APUs - GPU reset improvements UAPI: - Enable DRIVER_SYNCOBJ_TIMELINE for vulkan - Return better error values for kfd process ioctl Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200109230338.8022-1-alexander.deucher@amd.com
2020-01-13Merge tag 'drm-misc-next-2020-01-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: Cross-subsystem Changes: - Convert simple panel bindings to a template. Core Changes: - Revert drm-bridge-state changes, it causes a dependency error between drm and drm_kms_helper. - Fix when disabling crc's. - Assorted Kconfig fixes. Driver Changes: - Add ddc symlinks to more drivers. - Fix chained bridge handling in exynos and vc4. - More clock rate fixes in sun4i. - Add support for AUO B116XAK01, GiantPlus GPM940B0, Sony ACX424AKP, BOE NV140FHM-N49, Satoz SAT050AT40H12R2 and Sharp LS020B1DD01D panels. - Assorted small bugfixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e8d4944-68d7-0df3-f39b-31f6fba22a2a@linux.intel.com
2020-01-09drm: add dp helper to initialize remote aux channel.David (Dingchen) Zhang
[why] We need to minimally initialize the remote aux channel, e.g. the crc work struct of remote aux to dump the sink's DPRX CRCs in MST setup. [how] Add helper that only initializes the crc work struct of the remote aux, hooke crc work queue to 'drm_dp_aux_crc_work'. Then call this helper in DP MST port initialization. This, plus David Francis' patch [1], fix the issue of MST remote aux DPCD CRCs read. [1] https://patchwork.kernel.org/patch/11217941/ Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCsMikita Lipski
[why] Whenever a connector on an MST network is changed or undergoes a modeset, the DSC configs for each stream on that topology will be recalculated. This can change their required bandwidth, requiring a full reprogramming, as though a modeset was performed, even if that stream did not change timing. [how] Adding helper to trigger modesets on MST DSC connectors by setting mode_changed flag on CRTCs in the same topology as affected connector v2: use drm_dp_mst_dsc_aux_for_port function to verify if the port is DSC capable v3: - added _must_check attribute - removed topology manager check - fix typos and indentations Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add branch bandwidth validation to MST atomic checkMikita Lipski
[why] Adding PBN attribute to drm_dp_vcpi_allocation structure to keep track of how much bandwidth each Port requires. Adding drm_dp_mst_atomic_check_bw_limit to verify that state's bandwidth needs doesn't exceed available bandwidth. The funtion is called in drm_dp_mst_atomic_check after drm_dp_mst_atomic_check_topology_state to fully verify that the proposed topology is supported. v2: Fixing some typos and indenting v3: Return correct error enums if no bw space available Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add DSC enablement helpers to DRMMikita Lipski
Adding a helper function to be called by drivers outside of DRM to enable DSC on the MST ports. Function is called to recalculate VCPI allocation if DSC is enabled and raise the DSC flag to enable. In case of disabling DSC the flag is set to false and recalculation of VCPI slots is expected to be done in encoder's atomic_check. v2: squash separate functions into one and call it per port v3: Fix comment typos Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Manually overwrite PBN divider for calculating timeslotsMikita Lipski
[why] For DSC case we cannot use topology manager's PBN divider variable. The default divider does not take FEC into account. Therefore the driver has to calculate its own divider based on the link rate and lane count its handling, as it is hw specific. [how] Pass pbn_div as an argument, which is used if its more than zero, otherwise default topology manager's pbn_div will be used. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add new quirk for Synaptics MST hubsMikita Lipski
Synaptics DP1.4 hubs (BRANCH_ID 0x90CC24) do not support virtual DPCD registers, but do support DSC. The DSC caps can be read from the physical aux, like in SST DSC. These hubs have many different DEVICE_IDs. Add a new quirk to detect this case. v2: Fix error when checking return of drm_dp_read_desc Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add helpers for MST DSC and virtual DPCD auxDavid Francis
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED register might have to be written on the leaf port's DPCD, its parent's DPCD, or the MST manager's DPCD. This function finds the correct aux for the job. As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual DPCD is a DP feature new in DP v1.4, which exposes certain DPCD registers on virtual ports. v2: Remember to unlock mutex on all paths v3: Refactor to match coding style and increase brevity v4: - Check DSC capable MST sink connected directly to the device. - Check branch's port_parent to be set Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Parse FEC capability on MST portsDavid Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating if FEC can be supported up to that point in the MST network. The bit is the first byte of the ENUM_PATH_RESOURCES ack reply, bottom-most bit (refer to section 2.11.9.4 of DP standard, v1.4) That value is needed for FEC and DSC support Store it on drm_dp_mst_port Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add PBN calculation for DSC modesDavid Francis
With DSC, bpp can be fractional in multiples of 1/16. Change drm_dp_calc_pbn_mode to reflect this, adding a new parameter bool dsc. When this parameter is true, treat the bpp parameter as having units not of bits per pixel, but 1/16 of a bit per pixel v2: Don't add separate function for this v3: In the equation divide bpp by 16 as it is expected not to leave any remainder v4: Added DSC test parameters for selftest Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/fb-cma-helpers: Fix include issueBenjamin Gaignard
Exported functions prototypes are missing in drm_fb_cma_helper.c Include drm_fb_cma_helper to fix that issue. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20191119105753.32363-1-benjamin.gaignard@st.com
2020-01-09Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Sync with drm-next to get the new logging macros, among other things. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-01-09Merge tag 'drm-misc-next-2020-01-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Allow overriding number of bootup penguins in fbcon using fbcon=logo-count:n. Cross-subsystem Changes: - fbdev fixes for mmp, and make it work with CONFIG_COMPILE_TEST. - Use devm_platform_ioremap_resource in fbdev drivers. - Various small fbdev fixes. Core Changes: - Support scanline alignment for dumb buffers. - Add atomic_check() hook to bridge ops, to support bus format negotiation. - Add gem_create_object() to vram helpers. Driver Changes: - Rockchip: Add support for PX30. - Use generic fbdev code and dumb helpers in hisilicon/hibmc. - Add support for Leadtek LTK500HD1829 panel, and xinpeng XPP055C272. - Clock fixes for atmel-hlcdc. - Various smaller fixes to all drivers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8eff1e3f-ef0a-2dd9-9a14-6273b1d6f963@linux.intel.com
2020-01-09drm: of: Fix linking when CONFIG_OF is not setLaurent Pinchart
The new helper drm_of_lvds_get_dual_link_pixel_order() introduced in commit 6529007522de has a fallback stub when CONFIG_OF is not set, but the stub is declared in drm_of.h without a static inline. This causes multiple definitions of the function to be linked when the CONFIG_OF option isn't set. Fix it by making the stub static inline. Fixes: 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191219103703.8547-1-laurent.pinchart+renesas@ideasonboard.com
2020-01-08Revert "drm/bridge: Add a drm_bridge_state object"Boris Brezillon
This reverts commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") which introduced a circular dependency between drm.ko and drm_kms_helper.ko. Looks like the helper/core split is not appropriate and fixing that is not simple. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Patch atomic hooks to take a drm_bridge_state"Boris Brezillon
This reverts commit f7619a58ef92 ("drm/bridge: Patch atomic hooks to take a drm_bridge_state"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Add an ->atomic_check() hook"Boris Brezillon
This reverts commit b86d895524ab ("drm/bridge: Add an ->atomic_check() hook"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Add the necessary bits to support bus format negotiation"Boris Brezillon
This reverts commit e351e4d5eaec ("drm/bridge: Add the necessary bits to support bus format negotiation"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com
2020-01-07drm/fb: Extend format_info member arrays to handle four planesDhinakaran Pandiyan
addfb() uAPI has supported four planes for a while now, make format_info compatible with that. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191231233756.18753-7-imre.deak@intel.com
2020-01-07drm/vram-helper: Remove BO device from public interfaceThomas Zimmermann
TTM is an implementation detail of the VRAM helpers and therefore shouldn't be exposed to the callers. There's only one correct value for the BO device anyway, which is the one stored in the DRM device. So remove struct ttm_bo_device from the VRAM-helper interface and use the device's VRAM manager unconditionally. The GEM initializer function fails if the VRAM manager has not been initialized. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-8-tzimmermann@suse.de
2020-01-07drm/vram-helper: Remove interruptible flag from public interfaceThomas Zimmermann
The flag 'interruptible', which is passed to various functions, is always set to be false. Remove it and hard-code the value. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-7-tzimmermann@suse.de
2020-01-07drm/bridge: Add the necessary bits to support bus format negotiationBoris Brezillon
drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com
2020-01-07drm/bridge: Add an ->atomic_check() hookBoris Brezillon
So that bridge drivers have a way to check/reject an atomic operation. The drm_atomic_bridge_chain_check() (which is just a wrapper around the ->atomic_check() hook) is called in place of drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented, the core falls back on ->mode_fixup(), so the behavior should stay the same for existing bridge drivers). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-4-narmstrong@baylibre.com
2020-01-07drm/bridge: Patch atomic hooks to take a drm_bridge_stateBoris Brezillon
This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The only driver implementing those hooks (analogix DP) is patched too. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> [narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable] Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-3-narmstrong@baylibre.com
2020-01-07drm/bridge: Add a drm_bridge_state objectBoris Brezillon
One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-2-narmstrong@baylibre.com
2020-01-06drm/vram: Support scanline alignment for dumb buffersThomas Zimmermann
Adding the pitch alignment as an argument to drm_gem_vram_fill_create_dumb() allows to align scanlines to certain offsets. A value of 0 disables scanline pitches. v3: * only do power-of-2 test if pitch_align given; fails otherwise * mgag200: call drm_gem_vram_fill_create_dumb() with pitch_align v2: * split of patch from related hibmc changes * test if scanline pitch is power of 2 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-4-tzimmermann@suse.de
2020-01-03Merge tag 'drm-misc-next-2020-01-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Commandline parser: Add support for panel orientation, and per-mode options. - Fix IOCTL naming for dma-buf heaps. Cross-subsystem Changes: - Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi. - Change DMA-BUF system-heap's name to system. - Fix leak in error handling in dma_heap_ioctl(), and make a symbol static. - Fix udma-buf cpu access. - Fix ti devicetree bindings. Core Changes: - Add CTA-861-G modes with VIC >= 193. - Change error handling and remove bug_on in *drm_dev_init. - Export drm_panel_of_backlight() correctly once more. - Add support for lvds decoders. - Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo. Driver Changes: - Add support for dsi/px30 to rockchip. - Add fb damage support to virtio. - Use dma_resv locking wrappers in vc4, msm, etnaviv. - Make functions in virtio static, and perform some simplifications. - Add suspend support to sun4i. - Add A64 mipi dsi support to sun4i. - Add runtime pm suspend to komeda. - Associated driver fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/efc11139-1653-86bc-1b0f-0aefde219850@linux.intel.com
2019-12-27Merge tag 'drm-intel-next-2019-12-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next i915 features for v5.6: - Separate hardware and uapi state (Maarten) - Expose a number of sprite and plane formats (Ville) - DDC symlink in HDMI connector sysfs directory (Andrzej Pietrasiewicz) - Improve obj->mm.lock nesting lock annotation (Daniel) (Includes lockdep changes) - Selftest improvements across the board (Chris) - ICL/TGL VDSC support on DSI (Jani, Vandita) - TGL DSB fixes (Animesh, Lucas, Tvrtko) - VBT parsing improvements and fixes (Lucas, Matt, José, Jani, Dan Carpenter) - Fix LPSS vs. PMIC PWM backlight use on BYT/CHT (Hans) (Includes ACPI+MFD changes) - Display state, crtc, plane code refactoring (Ville) - Set opregion chpd value to indicate the driver handles hotplug (Hans de Goede) - DSI updates and fixes, TGL pipe D support, port mapping (José, Jani, Vandita) - Make HDCP 2.2 support cover CFL (Juston Li) - Fix CML PCI IDs and ULT (Shawn Lee) - CMP-V PCH fix (Imre) - TGL: Add another TGL PCH ID (James) - EHL/JSL: Add new PCI IDs (James) - Rename pipe update tracepoints (Ville) - Fix FBC on GLK+ (Ville) - GuC fixes and improvements (Daniele, Don Hiatt, Stuart Summers, Matthew Brost) - Display debugfs improvements (Ville) - Hotplug/irq fixes (Matt) - PSR fixes and improvements (José) - DRM_I915_GEM_MMAP_OFFSET ioctl (Abdiel) - Static analysis fixes (Colin Ian King) - Register sysctl path globally (Venkata Sandeep Dhanalakota) - Introduce new macros for tracing (Venkata Sandeep Dhanalakota) - Migrate gt towards intel_uncore_read/write (Andi) - Add rps frequency translation helpers (Andi) - Fix TGL transcoder clock off sequence (José) - Fix TGL port A audio (Kai Vehmanen) - TGL render decompression (DK) - GEM/GT improvements and fixes across the board (Chris) - Couple of backmerges (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 24 Dec 2019 03:20:48 AM AEST # gpg: using RSA key D398079D26ABEE6F # gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1565 A65B 77B0 632E 1124 E59C D398 079D 26AB EE6F # Conflicts: # drivers/gpu/drm/i915/display/intel_fbc.c # drivers/gpu/drm/i915/gt/intel_lrc.c # drivers/gpu/drm/i915/i915_gem.c From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lfr3rkry.fsf@intel.com
2019-12-22drm/atomic: Spell CRTC consistentlyThierry Reding
CRTC is an abbreviation and should be all caps in prose. Update all kerneldoc comments to use a consistent spelling. v2: remove hunk unrelated to the CRTC spelling fixes Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206135336.2084564-2-thierry.reding@gmail.com
2019-12-22drm: Fix a couple of typos, punctation and whitespace issuesThierry Reding
These are just a couple of things that I came across as I was reading through the code and comments. v2: added one more hunk that ended up in the wrong patch Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206135336.2084564-1-thierry.reding@gmail.com
2019-12-18drm: Add Reusable task barrier.Andrey Grodzovsky
It is used to synchronize N threads at a rendevouz point before execution of critical code that has to be started by all the threads at approximatly the same time. v2: Remove mention of reset use case, improve doc. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/scheduler: rework entity creationNirmoy Das
Entity currently keeps a copy of run_queue list and modify it in drm_sched_entity_set_priority(). Entities shouldn't modify run_queue list. Use drm_gpu_scheduler list instead of drm_sched_rq list in drm_sched_entity struct. In this way we can select a runqueue based on entity/ctx's priority for a drm scheduler. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18Merge tag 'du-next-20191218' of git://linuxtv.org/pinchartl/media into drm-nextDaniel Vetter
R-Car Display Unit changes: - Color Management Module support - LVDS encoder dual-link support enhancements - R8A77980 support Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218151710.GA13830@pendragon.ideasonboard.com
2019-12-18drm: Add __drm_atomic_helper_crtc_state_reset() & co.Ville Syrjälä
Annoyingly __drm_atomic_helper_crtc_reset() does two totally separate things: a) reset the state to defaults values b) assign the crtc->state pointer I just want a) without the b) so let's split out part a) into __drm_atomic_helper_crtc_state_reset(). And of course we'll do the same thing for planes and connectors. v2: Fix conn__state vs. conn_state typo (Lucas) Make code and kerneldoc match for __drm_atomic_helper_plane_state_reset() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107142417.11107-1-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-12-18drm: of: Add drm_of_lvds_get_dual_link_pixel_orderFabrizio Castro
An LVDS dual-link connection is made of two links, with even pixels transitting on one link, and odd pixels on the other link. The device tree can be used to fully describe dual-link LVDS connections between encoders and bridges/panels. The sink of an LVDS dual-link connection is made of two ports, the corresponding OF graph port nodes can be marked with either dual-lvds-even-pixels or dual-lvds-odd-pixels, and that fully describes an LVDS dual-link connection, including pixel order. drm_of_lvds_get_dual_link_pixel_order is a new helper added by this patch, given the source port nodes it returns DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS if the source port nodes belong to an LVDS dual-link connection, with even pixels expected to be generated from the first port, and odd pixels expected to be generated from the second port. If the new helper returns DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS, odd pixels are expected to be generated from the first port, and even pixels from the other port. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-17drm/drm_panel: Fix EXPORT of drm_panel_of_backlight() one more timeAndy Shevchenko
The initial commit followed by the fix didn't take into consideration the case: CONFIG_DRM_PANEL=y CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_DRM_I915=y where symbol devm_of_find_backlight() is not reachable from DRM subsystem. Quick fix is to avoid drm_panel_of_backlight() from exporting in such case. Fixes: 907aa265fde6 ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight") Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191217140721.42432-1-andriy.shevchenko@linux.intel.com
2019-12-17drm/print: introduce new struct drm_device based logging macrosJani Nikula
Add new struct drm_device based logging macros modeled after the core kernel device based logging macros. These would be preferred over the drm printk and struct device based macros in drm code, where possible. We have existing drm specific struct device based logging functions, but they are too verbose to use for two main reasons: * The names are unnecessarily long, for example DRM_DEV_DEBUG_KMS(). * The use of struct device over struct drm_device is too generic for most users, leading to an extra dereference. For example: DRM_DEV_DEBUG_KMS(drm->dev, "Hello, world\n"); vs. drm_dbg_kms(drm, "Hello, world\n"); It's a matter of taste, but the SHOUTING UPPERCASE has been argued to be less readable than lowercase. Some names are changed from old DRM names to be based on the core kernel logging functions. For example, NOTE -> notice, ERROR -> err, DEBUG -> dbg. Due to the conflation of DRM_DEBUG and DRM_DEBUG_DRIVER macro use (DRM_DEBUG is used widely in drivers though it's supposed to be a core debugging category), they are named as drm_dbg_core and drm_dbg, respectively. The drm_err and _once/_ratelimited variants no longer include the function name in order to be able to use the core device based logging macros. Arguably this is not a significant change; error messages should not be so common to be only distinguishable by the function name. Ratelimited debug logging macros are to be added later. Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Sean Paul <sean@poorly.run> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191210123050.8799-1-jani.nikula@intel.com
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-16drm/modes: parse_cmdline: Add support for specifying panel_orientation (v2)Hans de Goede
Sometimes we want to override a connector's panel_orientation from the kernel commandline. Either for testing and for special cases, e.g. a kiosk like setup which uses a TV mounted in portrait mode. Users can already specify a "rotate" option through a video= kernel cmdline option. But that only supports 0/180 degrees (see drm_client_modeset TODO) and only works for in kernel modeset clients, not for userspace kms users. The "panel-orientation" connector property OTOH does support 90/270 degrees as it leaves dealing with the rotation up to userspace and this does work for userspace kms clients (at least those which support this property). Changes in v2: -Add missing ':' after @panel_orientation (reported by kbuild test robot) BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83 Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-9-hdegoede@redhat.com