summaryrefslogtreecommitdiff
path: root/include/kvm
AgeCommit message (Collapse)Author
2019-11-08Merge remote-tracking branch 'kvmarm/misc-5.5' into kvmarm/nextMarc Zyngier
2019-10-29KVM: arm/arm64: vgic: Fix some comments typoZenghui Yu
Fix various comments, including wrong function names, grammar mistakes and specification references. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
2019-10-29KVM: arm/arm64: vgic: Remove the declaration of kvm_send_userspace_msi()Zenghui Yu
The callsite of kvm_send_userspace_msi() is currently arch agnostic. There seems no reason to keep an extra declaration of it in arm_vgic.h (we already have one in include/linux/kvm_host.h). Remove it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20191029071919.177-2-yuzenghui@huawei.com
2019-10-28KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/putMarc Zyngier
When the VHE code was reworked, a lot of the vgic stuff was moved around, but the GICv4 residency code did stay untouched, meaning that we come in and out of residency on each flush/sync, which is obviously suboptimal. To address this, let's move things around a bit: - Residency entry (flush) moves to vcpu_load - Residency exit (sync) moves to vcpu_put - On blocking (entry to WFI), we "put" - On unblocking (exit from WFI), we "load" Because these can nest (load/block/put/load/unblock/put, for example), we now have per-VPE tracking of the residency state. Additionally, vgic_v4_put gains a "need doorbell" parameter, which only gets set to true when blocking because of a WFI. This allows a finer control of the doorbell, which now also gets disabled as soon as it gets signaled. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
2019-10-21KVM: arm/arm64: Factor out hypercall handling from PSCI codeChristoffer Dall
We currently intertwine the KVM PSCI implementation with the general dispatch of hypercall handling, which makes perfect sense because PSCI is the only category of hypercalls we support. However, as we are about to support additional hypercalls, factor out this functionality into a separate hypercall handler file. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> [steven.price@arm.com: rebased] Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-25KVM: arm/arm64: vgic: Use a single IO device per redistributorEric Auger
At the moment we use 2 IO devices per GICv3 redistributor: one one for the RD_base frame and one for the SGI_base frame. Instead we can use a single IO device per redistributor (the 2 frames are contiguous). This saves slots on the KVM_MMIO_BUS which is currently limited to NR_IOBUS_DEVS (1000). This change allows to instantiate up to 512 redistributors and may speed the guest boot with a large number of VCPUs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic: Add LPI translation cache definitionMarc Zyngier
Add the basic data structure that expresses an MSI to LPI translation as well as the allocation/release hooks. The size of the cache is arbitrarily defined as 16*nr_vcpus. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-05KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to blockMarc Zyngier
Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-23KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter indexZenghui Yu
We use "pmc->idx" and the "chained" bitmap to determine if the pmc is chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized (and random) when we doing this decision, through a KVM_ARM_VCPU_INIT ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random idx will potentially hit a KASAN BUG [1]. In general, idx is the static property of a PMU counter that is not expected to be modified across resets, as suggested by Julien. It looks more reasonable if we can setup the PMU counter idx for a vcpu in its creation time. Introduce a new function - kvm_pmu_vcpu_init() for this basic setup. Oh, and the KASAN BUG will get fixed this way. [1] https://www.spinics.net/lists/kvm-arm/msg36700.html Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Suggested-by: Andrew Murray <andrew.murray@arm.com> Suggested-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Support chained PMU countersAndrew Murray
ARMv8 provides support for chained PMU counters, where an event type of 0x001E is set for odd-numbered counters, the event counter will increment by one for each overflow of the preceding even-numbered counter. Let's emulate this in KVM by creating a 64 bit perf counter when a user chains two emulated counters together. For chained events we only support generating an overflow interrupt on the high counter. We use the attributes of the low counter to determine the attributes of the perf event. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Remove pmc->bitmaskAndrew Murray
We currently use pmc->bitmask to determine the width of the pmc - however it's superfluous as the pmc index already describes if the pmc is a cycle counter or event counter. The architecture clearly describes the widths of these counters. Let's remove the bitmask to simplify the code. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functionsAndrew Murray
The kvm_pmu_{enable/disable}_counter functions can enable/disable multiple counters at once as they operate on a bitmask. Let's make this clearer by renaming the function. Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 342Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 15 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000437.237481593@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-02-19KVM: arm/arm64: Rework the timer code to use a timer_mapChristoffer Dall
We are currently emulating two timers in two different ways. When we add support for nested virtualization in the future, we are going to be emulating either two timers in two diffferent ways, or four timers in a single way. We need a unified data structure to keep track of how we map virtual state to physical state and we need to cleanup some of the timer code to operate more independently on a struct arch_timer_context instead of trying to consider the global state of the VCPU and recomputing all state. Co-written with Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-02-19KVM: arm/arm64: arch_timer: Assign the phys timer on VHE systemsChristoffer Dall
VHE systems don't have to emulate the physical timer, we can simply assign the EL1 physical timer directly to the VM as the host always uses the EL2 timers. In order to minimize the amount of cruft, AArch32 gets definitions for the physical timer too, but is should be generally unused on this architecture. Co-written with Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-02-19KVM: arm/arm64: timer: Rework data structures for multiple timersChristoffer Dall
Prepare for having 4 timer data structures (2 for now). Move loaded to the cpu data structure and not the individual timer structure, in preparation for assigning the EL1 phys timer as well. Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: consolidate arch timer trap handlersAndre Przywara
At the moment we have separate system register emulation handlers for each timer register. Actually they are quite similar, and we rely on kvm_arm_timer_[gs]et_reg() for the actual emulation anyways, so let's just merge all of those handlers into one function, which just marshalls the arguments and then hands off to a set of common accessors. This makes extending the emulation to include EL2 timers much easier. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [Fixed 32-bit VM breakage and reduced to reworking existing code] Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> [Fixed 32bit host, general cleanup] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-19KVM: arm/arm64: Simplify bg_timer programmingChristoffer Dall
Instead of calling into kvm_timer_[un]schedule from the main kvm blocking path, test if the VCPU is on the wait queue from the load/put path and perform the background timer setup/cancel in this path. This has the distinct advantage that we no longer race between load/put and schedule/unschedule and programming and canceling of the bg_timer always happens when the timer state is not loaded. Note that we must now remove the checks in kvm_timer_blocking that do not schedule a background timer if one of the timers can fire, because we no longer have a guarantee that kvm_vcpu_check_block() will be called before kvm_timer_blocking. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-01-24KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlockJulien Thierry
vgic_cpu->ap_list_lock must always be taken with interrupts disabled as it is used in interrupt context. For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-01-24KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlockJulien Thierry
vgic_dist->lpi_list_lock must always be taken with interrupts disabled as it is used in interrupt context. For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2019-01-24KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlockJulien Thierry
vgic_irq->irq_lock must always be taken with interrupts disabled as it is used in interrupt context. For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2018-12-19KVM: arm/arm64: Remove arch timer workqueueChristoffer Dall
The use of a work queue in the hrtimer expire function for the bg_timer is a leftover from the time when we would inject interrupts when the bg_timer expired. Since we are no longer doing that, we can instead call kvm_vcpu_wake_up() directly from the hrtimer function and remove all workqueue functionality from the arch timer code. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-08-12KVM: arm/arm64: vgic-v3: Add core support for Group0 SGIsMarc Zyngier
Although vgic-v3 now supports Group0 interrupts, it still doesn't deal with Group0 SGIs. As usually with the GIC, nothing is simple: - ICC_SGI1R can signal SGIs of both groups, since GICD_CTLR.DS==1 with KVM (as per 8.1.10, Non-secure EL1 access) - ICC_SGI0R can only generate Group0 SGIs - ICC_ASGI1R sees its scope refocussed to generate only Group0 SGIs (as per the note at the bottom of Table 8-14) We only support Group1 SGIs so far, so no material change. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-21KVM: arm/arm64: vgic: Let userspace opt-in to writable v2 IGROUPRChristoffer Dall
Simply letting IGROUPR be writable from userspace would break migration from old kernels to newer kernels, because old kernels incorrectly report interrupt groups as group 1. This would not be a big problem if userspace wrote GICD_IIDR as read from the kernel, because we could detect the incompatibility and return an error to userspace. Unfortunately, this is not the case with current userspace implementations and simply letting IGROUPR be writable from userspace for an emulated GICv2 silently breaks migration and causes the destination VM to no longer run after migration. We now encourage userspace to write the read and expected value of GICD_IIDR as the first part of a GIC register restore, and if we observe a write to GICD_IIDR we know that userspace has been updated and has had a chance to cope with older kernels (VGICv2 IIDR.Revision == 0) incorrectly reporting interrupts as group 1, and therefore we now allow groups to be user writable. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-21KVM: arm/arm64: vgic: Add group field to struct irqChristoffer Dall
In preparation for proper group 0 and group 1 support in the vgic, we add a field in the struct irq to store the group of all interrupts. We initialize the group to group 0 when emulating GICv2 and to group 1 when emulating GICv3, just like we treat them today. LPIs are always group 1. We also continue to ignore writes from the guest, preserving existing functionality, for now. Finally, we also add this field to the vgic debug logic to show the group for all interrupts. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-21KVM: arm/arm64: vgic: Keep track of implementation revisionChristoffer Dall
As we are about to tweak implementation aspects of the VGIC emulation, while still preserving some level of backwards compatibility support, add a field to keep track of the implementation revision field which is reported to the VM and to userspace. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-25KVM: arm/arm64: Bump VGIC_V3_MAX_CPUS to 512Eric Auger
Let's raise the number of supported vcpus along with vgic v3 now that HW is looming with more physical CPUs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-25KVM: arm/arm64: Remove kvm_vgic_vcpu_early_initEric Auger
kvm_vgic_vcpu_early_init gets called after kvm_vgic_cpu_init which is confusing. The call path is as follows: kvm_vm_ioctl_create_vcpu |_ kvm_arch_cpu_create |_ kvm_vcpu_init |_ kvm_arch_vcpu_init |_ kvm_vgic_vcpu_init |_ kvm_arch_vcpu_postcreate |_ kvm_vgic_vcpu_early_init Static initialization currently done in kvm_vgic_vcpu_early_init() can be moved to kvm_vgic_vcpu_init(). So let's move the code and remove kvm_vgic_vcpu_early_init(). kvm_arch_vcpu_postcreate() does nothing. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-25KVM: arm/arm64: Replace the single rdist region by a listEric Auger
At the moment KVM supports a single rdist region. We want to support several separate rdist regions so let's introduce a list of them. This patch currently only cares about a single entry in this list as the functionality to register several redist regions is not yet there. So this only translates the existing code into something functionally similar using that new data struct. The redistributor region handle is stored in the vgic_cpu structure to allow later computation of the TYPER last bit. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-27KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGIMarc Zyngier
Now that we make sure we don't inject multiple instances of the same GICv2 SGI at the same time, we've made another bug more obvious: If we exit with an active SGI, we completely lose track of which vcpu it came from. On the next entry, we restore it with 0 as a source, and if that wasn't the right one, too bad. While this doesn't seem to trouble GIC-400, the architectural model gets offended and doesn't deactivate the interrupt on EOI. Another connected issue is that we will happilly make pending an interrupt from another vcpu, overriding the above zero with something that is just as inconsistent. Don't do that. The final issue is that we signal a maintenance interrupt when no pending interrupts are present in the LR. Assuming we've fixed the two issues above, we end-up in a situation where we keep exiting as soon as we've reached the active state, and not be able to inject the following pending. The fix comes in 3 parts: - GICv2 SGIs have their source vcpu saved if they are active on exit, and restored on entry - Multi-SGIs cannot go via the Pending+Active state, as this would corrupt the source field - Multi-SGIs are converted to using MI on EOI instead of NPIE Fixes: 16ca6a607d84bef0 ("KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid") Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-20arm/arm64: KVM: Add PSCI version selection APIMarc Zyngier
Although we've implemented PSCI 0.1, 0.2 and 1.0, we expose either 0.1 or 1.0 to a guest, defaulting to the latest version of the PSCI implementation that is compatible with the requested version. This is no different from doing a firmware upgrade on KVM. But in order to give a chance to hypothetical badly implemented guests that would have a fit by discovering something other than PSCI 0.2, let's provide a new API that allows userspace to pick one particular version of the API. This is implemented as a new class of "firmware" registers, where we expose the PSCI version. This allows the PSCI version to be save/restored as part of a guest migration, and also set to any supported version if the guest requires it. Cc: stable@vger.kernel.org #4.16 Reviewed-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19Merge tag 'kvm-arm-fixes-for-v4.16-2' into HEADMarc Zyngier
Resolve conflicts with current mainline
2018-03-19KVM: arm/arm64: Keep GICv2 HYP VAs in kvm_vgic_global_stateMarc Zyngier
As we're about to change the way we map devices at HYP, we need to move away from kern_hyp_va on an IO address. One way of achieving this is to store the VAs in kvm_vgic_global_state, and use that directly from the HYP code. This requires a small change to create_hyp_io_mappings so that it can also return a HYP VA. We take this opportunity to nuke the vctrl_base field in the emulated distributor, as it is not used anymore. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Get rid of vgic_elrsrChristoffer Dall
There is really no need to store the vgic_elrsr on the VGIC data structures as the only need we have for the elrsr is to figure out if an LR is inactive when we save the VGIC state upon returning from the guest. We can might as well store this in a temporary local variable. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14KVM: arm/arm64: Reset mapped IRQs on VM resetChristoffer Dall
We currently don't allow resetting mapped IRQs from userspace, because their state is controlled by the hardware. But we do need to reset the state when the VM is reset, so we provide a function for the 'owner' of the mapped interrupt to reset the interrupt state. Currently only the timer uses mapped interrupts, so we call this function from the timer reset logic. Cc: stable@vger.kernel.org Fixes: 4c60e360d6df ("KVM: arm/arm64: Provide a get_input_level for the arch timer") Signed-off-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-02-10Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-08Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: "As I mentioned in the last pull request, there's a second batch of security updates for arm64 with mitigations for Spectre/v1 and an improved one for Spectre/v2 (via a newly defined firmware interface API). Spectre v1 mitigation: - back-end version of array_index_mask_nospec() - masking of the syscall number to restrict speculation through the syscall table - masking of __user pointers prior to deference in uaccess routines Spectre v2 mitigation update: - using the new firmware SMC calling convention specification update - removing the current PSCI GET_VERSION firmware call mitigation as vendors are deploying new SMCCC-capable firmware - additional branch predictor hardening for synchronous exceptions and interrupts while in user mode Meltdown v3 mitigation update: - Cavium Thunder X is unaffected but a hardware erratum gets in the way. The kernel now starts with the page tables mapped as global and switches to non-global if kpti needs to be enabled. Other: - Theoretical trylock bug fixed" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (38 commits) arm64: Kill PSCI_GET_VERSION as a variant-2 workaround arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support arm/arm64: smccc: Implement SMCCC v1.1 inline primitive arm/arm64: smccc: Make function identifiers an unsigned quantity firmware/psci: Expose SMCCC version through psci_ops firmware/psci: Expose PSCI conduit arm64: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support arm/arm64: KVM: Turn kvm_psci_version into a static inline arm/arm64: KVM: Advertise SMCCC v1.1 arm/arm64: KVM: Implement PSCI 1.0 support arm/arm64: KVM: Add smccc accessors to PSCI code arm/arm64: KVM: Add PSCI_VERSION helper arm/arm64: KVM: Consolidate the PSCI include files arm64: KVM: Increment PC after handling an SMC trap arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls arm64: entry: Apply BP hardening for suspicious interrupts from EL0 arm64: entry: Apply BP hardening for high-priority synchronous exceptions arm64: futex: Mask __user pointers prior to dereference ...
2018-02-06arm/arm64: KVM: Turn kvm_psci_version into a static inlineMarc Zyngier
We're about to need kvm_psci_version in HYP too. So let's turn it into a static inline, and pass the kvm structure as a second parameter (so that HYP can do a kern_hyp_va on it). Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Advertise SMCCC v1.1Marc Zyngier
The new SMC Calling Convention (v1.1) allows for a reduced overhead when calling into the firmware, and provides a new feature discovery mechanism. Make it visible to KVM guests. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Implement PSCI 1.0 supportMarc Zyngier
PSCI 1.0 can be trivially implemented by providing the FEATURES call on top of PSCI 0.2 and returning 1.0 as the PSCI version. We happily ignore everything else, as they are either optional or are clarifications that do not require any additional change. PSCI 1.0 is now the default until we decide to add a userspace selection API. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Add PSCI_VERSION helperMarc Zyngier
As we're about to trigger a PSCI version explosion, it doesn't hurt to introduce a PSCI_VERSION helper that is going to be used everywhere. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Consolidate the PSCI include filesMarc Zyngier
As we're about to update the PSCI support, and because I'm lazy, let's move the PSCI include file to include/kvm so that both ARM architectures can find it. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-01Merge branch 'x86/hyperv' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Topic branch for stable KVM clockource under Hyper-V. Thanks to Christoffer Dall for resolving the ARM conflict.
2018-01-02KVM: arm/arm64: Provide a get_input_level for the arch timerChristoffer Dall
The VGIC can now support the life-cycle of mapped level-triggered interrupts, and we no longer have to read back the timer state on every exit from the VM if we had an asserted timer interrupt signal, because the VGIC already knows if we hit the unlikely case where the guest disables the timer without ACKing the virtual timer interrupt. This means we rework a bit of the code to factor out the functionality to snapshot the timer state from vtimer_save_state(), and we can reuse this functionality in the sync path when we have an irqchip in userspace, and also to support our implementation of the get_input_level() function for the timer. This change also means that we can no longer rely on the timer's view of the interrupt line to set the active state, because we no longer maintain this state for mapped interrupts when exiting from the guest. Instead, we only set the active state if the virtual interrupt is active, and otherwise we simply let the timer fire again and raise the virtual interrupt from the ISR. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-01-02KVM: arm/arm64: Support a vgic interrupt line level sample functionChristoffer Dall
The GIC sometimes need to sample the physical line of a mapped interrupt. As we know this to be notoriously slow, provide a callback function for devices (such as the timer) which can do this much faster than talking to the distributor, for example by comparing a few in-memory values. Fall back to the good old method of poking the physical GIC if no callback is provided. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-12-18KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GICMarc Zyngier
If we don't have a usable GIC, do not try to set the vcpu affinity as this is guaranteed to fail. Reported-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-29KVM: arm/arm64: Don't enable/disable physical timer access on VHEChristoffer Dall
After the timer optimization rework we accidentally end up calling physical timer enable/disable functions on VHE systems, which is neither needed nor correct, since the CNTHCTL_EL2 register format is different when HCR_EL2.E2H is set. The CNTHCTL_EL2 is initialized when CPUs become online in kvm_timer_init_vhe() and we don't have to call these functions on VHE systems, which also allows us to inline the non-VHE functionality. Reported-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>