summaryrefslogtreecommitdiff
path: root/include/linux/blk-cgroup.h
AgeCommit message (Collapse)Author
2021-08-16blk-cgroup: stop using seq_get_bufChristoph Hellwig
seq_get_buf is a crutch that undoes all the memory safety of the seq_file interface. Use the normal seq_printf interfaces instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210810152623.1796144-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10scsi: blkcg: Add app identifier support for blkcgMuneendra Kumar
Add a unique application identifier (i.e fc_app_id member) in blkcg. This allows identification of traffic belonging to an specific both on the host and in the fabric infrastructure. As an example, this allows the storage stack to uniquely identify traffic belong to particular virtual machine. Link: https://lore.kernel.org/r/20210608043556.274139-3-muneendra.kumar@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-01block: simplify bdev/disk lookup in blkdev_getChristoph Hellwig
To simplify block device lookup and a few other upcoming areas, make sure that we always have a struct block_device available for each disk and each partition, and only find existing block devices in bdget. The only downside of this is that each device and partition uses a little more memory. The upside will be that a lot of code can be simplified. With that all we need to look up the block device is to lookup the inode and do a few sanity checks on the gendisk, instead of the separate lookup for the gendisk. For blk-cgroup which wants to access a gendisk without opening it, a new blkdev_{get,put}_no_open low-level interface is added to replace the previous get_gendisk use. Note that the change to look up block device directly instead of the two step lookup using struct gendisk causes a subtile change in behavior: accessing a non-existing partition on an existing block device can now cause a call to request_module. That call is harmless, and in practice no recent system will access these nodes as they aren't created by udev and static /dev/ setups are unusual. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08writeback: remove struct bdi_writeback_congestedChristoph Hellwig
We never set any congested bits in the group writeback instances of it. And for the simpler bdi-wide case a simple scalar field is all that that is needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29blk-cgroup: remove blkcg_bio_issue_checkChristoph Hellwig
blkcg_bio_issue_check is a giant inline function that does three entirely different things. Factor out the blk-cgroup related bio initalization into a new helper, and the open code the sequence in the only caller, relying on the fact that all the actual functionality is stubbed out for non-cgroup builds. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29blk-cgroup: move rcu locking from blkcg_bio_issue_check to blk_throtl_bioChristoph Hellwig
The only thing in blkcg_bio_issue_check that needs to be under rcu_read_lock is blk_throtl_bio, so move the locking there. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29blk-cgroup: remove the !bio->bi_blkg check in blkcg_bio_issue_checkChristoph Hellwig
This is purely a sanity check for grave programming errors. Remove it to simplify further work in this area. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29block: move the bio cgroup associatation helpers to blk-cgroup.cChristoph Hellwig
Keep the cgroup code together. Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-30blk-iocost: switch to fixed non-auto-decaying use_delayTejun Heo
The use_delay mechanism was introduced by blk-iolatency to hold memory allocators accountable for the reclaim and other shared IOs they cause. The duration of the delay is dynamically balanced between iolatency increasing the value on each target miss and it auto-decaying as time passes and threads get delayed on it. While this works well for iolatency, iocost's control model isn't compatible with it. There is no repeated "violation" events which can be balanced against auto-decaying. iocost instead knows how much a given cgroup is over budget and wants to prevent that cgroup from issuing IOs while over budget. Until now, iocost has been adding the cost of force-issued IOs. However, this doesn't reflect the amount which is already over budget and is simply not enough to counter the auto-decaying allowing anon-memory leaking low priority cgroup to go over its alloted share of IOs. As auto-decaying doesn't make much sense for iocost, this patch introduces a different mode of operation for use_delay - when blkcg_set_delay() are used insted of blkcg_add/use_delay(), the delay duration is not auto-decayed until it is explicitly cleared with blkcg_clear_delay(). iocost is updated to keep the delay duration synchronized to the budget overage amount. With this change, iocost can effectively police cgroups which generate significant amount of force-issued IOs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-29block: replace BIO_QUEUE_ENTERED with BIO_CGROUP_ACCTChristoph Hellwig
BIO_QUEUE_ENTERED is only used for cgroup accounting now, so rename the flag and move setting it into the cgroup code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-01blkcg: don't offline parent blkcg firstTejun Heo
blkcg->cgwb_refcnt is used to delay blkcg offlining so that blkgs don't get offlined while there are active cgwbs on them. However, it ends up making offlining unordered sometimes causing parents to be offlined before children. Let's fix this by making child blkcgs pin the parents' online states. Note that pin/unpin names are chosen over get/put intentionally because css uses get/put online for something different. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-01blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use itTejun Heo
blkcg->cgwb_refcnt is used to delay blkcg offlining so that blkgs don't get offlined while there are active cgwbs on them. However, it ends up making offlining unordered sometimes causing parents to be offlined before children. To fix it, we want child blkcgs to pin the parents' online states turning the refcnt into a more generic online pinning mechanism. In prepartion, * blkcg->cgwb_refcnt -> blkcg->online_pin * blkcg_cgwb_get/put() -> blkcg_pin/unpin_online() * Take them out of CONFIG_CGROUP_WRITEBACK Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-12blk-cgroup: remove blkcg_drain_queueGuoqing Jiang
Since blk_drain_queue had already been removed, so this function is not needed anymore. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-18blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1Tejun Heo
Currently, cgroup rstat is supported only on cgroup2 hierarchy and rstat functions shouldn't be called on cgroup1 cgroups. While converting blk-cgroup core statistics to rstat, f73316482977 ("blk-cgroup: reimplement basic IO stats using cgroup rstat") accidentally ended up calling cgroup_rstat_updated() on cgroup1 cgroups causing crashes. Longer term, we probably should add cgroup1 support to rstat but for now let's mask the call directly. Fixes: f73316482977 ("blk-cgroup: reimplement basic IO stats using cgroup rstat") Tested-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTATTejun Heo
blkg_rwstat is now only used by bfq-iosched and blk-throtl when on cgroup1. Let's move it into its own files and gate it behind a config option. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07blk-cgroup: reimplement basic IO stats using cgroup rstatTejun Heo
blk-cgroup has been using blkg_rwstat to track basic IO stats. Unfortunately, reading recursive stats scales badly as itinvolves walking all descendants. On systems with a huge number of cgroups (dead or alive), this can lead to substantial CPU cost when reading IO stats. This patch reimplements basic IO stats using cgroup rstat which uses more memory but makes recursive stat reading O(# descendants which have been active since last reading) instead of O(# descendants). * blk-cgroup core no longer uses sync/async stats. Introduce new stat enums - BLKG_IOSTAT_{READ|WRITE|DISCARD}. * Add blkg_iostat[_set] which encapsulates byte and io stats, last values for propagation delta calculation and u64_stats_sync for correctness on 32bit archs. * Update the new percpu stat counters directly and implement blkcg_rstat_flush() to implement propagation. * blkg_print_stat() can now bring the stats up to date by calling cgroup_rstat_flush() and print them instead of directly summing up all descendants. * It now allocates 96 bytes per cpu. It used to be 40 bytes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Dan Schatzberg <dschatzberg@fb.com> Cc: Daniel Xu <dlxu@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()Tejun Heo
These don't have users anymore. Remove them. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28blkcg: separate blkcg_conf_get_disk() out of blkg_conf_prep()Tejun Heo
Separate out blkcg_conf_get_disk() so that it can be used by blkcg policy interface file input parsers before the policy is actually enabled. This doesn't introduce any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()Tejun Heo
Instead of @node, pass in @q and @blkcg so that the alloc function has more context. This doesn't cause any behavior change and will be used by io.weight implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04block: Fix spelling in the header above blkg_lookup()Bart Van Assche
See also commit 8f4236d9008b ("block: remove QUEUE_FLAG_BYPASS and ->bypass") # v5.0. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-16blkcg: allow blkcg_policy->pd_stat() to print non-debug info tooTejun Heo
Currently, ->pd_stat() is called only when moduleparam blkcg_debug_stats is set which prevents it from printing non-debug policy-specific statistics. Let's move debug testing down so that ->pd_stat() can print non-debug stat too. This patch doesn't cause any visible behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10blkcg: implement REQ_CGROUP_PUNTTejun Heo
When a shared kthread needs to issue a bio for a cgroup, doing so synchronously can lead to priority inversions as the kthread can be trapped waiting for that cgroup. This patch implements REQ_CGROUP_PUNT flag which makes submit_bio() punt the actual issuing to a dedicated per-blkcg work item to avoid such priority inversions. This will be used to fix priority inversions in btrfs compression and should be generally useful as we grow filesystem support for comprehensive IO control. Cc: Chris Mason <clm@fb.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20blk-cgroup: move struct blkg_stat to bfqChristoph Hellwig
This structure and assorted infrastructure is only used by the bfq I/O scheduler. Move it there instead of bloating the common code. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20blk-cgroup: introduce a new struct blkg_rwstat_sampleChristoph Hellwig
When sampling the blkcg counts we don't need atomics or per-cpu variables. Introduce a new structure just containing plain u64 counters. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20blk-cgroup: pass blkg_rwstat structures by referenceChristoph Hellwig
Returning a structure generates rather bad code, so switch to passing by reference. Also don't require the structure to be zeroed and add to the 0-initialized counters, but actually set the counters to the calculated value. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20blk-cgroup: factor out a helper to read rwstat counterChristoph Hellwig
Trying to break up the crazy statements to something readable. Also switch to an unsigned counter as it can't ever turn negative. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-21blkcg: clean up blkg_tryget_closest()Dennis Zhou
The implementation of blkg_tryget_closest() wasn't super obvious and became a point of suspicion when debugging [1]. So let's clean it up so it's obviously not the problem. Also add missing RCU read locking to bio_clone_blkg_association(), which got exposed by adding the RCU read lock held check in blkg_tryget_closest(). [1] https://lore.kernel.org/linux-block/a7e97e4b-0dd8-3a54-23b7-a0f27b17fde8@kernel.dk/ Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-12blkcg: handle dying request_queue when associating a blkgDennis Zhou
Between v3 [1] and v4 [2] of the blkg association series, the association point moved from generic_make_request_checks(), which is called after the request enters the queue, to bio_set_dev(), which is when the bio is formed before submit_bio(). When the request_queue goes away, the blkgs supporting the request_queue are destroyed and then the q->root_blkg is set to %NULL. This patch adds a %NULL check to blkg_tryget_closest() to prevent the NPE caused by the above. It also adds a guard to see if the request_queue is dying when creating a blkg to prevent creating a blkg for a dead request_queue. [1] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [2] https://lore.kernel.org/lkml/20181126211946.77067-1-dennis@kernel.org/ Fixes: 5cdf2e3fea5e ("blkcg: associate blkg when associating a device") Reported-and-tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: put back rcu lock in blkcg_bio_issue_check()Dennis Zhou
I was a little overzealous in removing the rcu_read_lock() call from blkcg_bio_issue_check() and it broke blk-throttle. Put it back. Fixes: e35403a034bf ("blkcg: associate blkg when associating a device") Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: rename blkg_try_get() to blkg_tryget()Dennis Zhou
blkg reference counting now uses percpu_ref rather than atomic_t. Let's make this consistent with css_tryget. This renames blkg_try_get to blkg_tryget and now returns a bool rather than the blkg or %NULL. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: change blkg reference counting to use percpu_refDennis Zhou
Every bio is now associated with a blkg putting blkg_get, blkg_try_get, and blkg_put on the hot path. Switch over the refcnt in blkg to use percpu_ref. Signed-off-by: Dennis Zhou <dennis@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: remove additional reference to the cssDennis Zhou
The previous patch in this series removed carrying around a pointer to the css in blkg. However, the blkg association logic still relied on taking a reference on the css to ensure we wouldn't fail in getting a reference for the blkg. Here the implicit dependency on the css is removed. The association continues to rely on the tryget logic walking up the blkg tree. This streamlines the three ways that association can happen: normal, swap, and writeback. Signed-off-by: Dennis Zhou <dennis@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: remove bio->bi_css and instead use bio->bi_blkgDennis Zhou
Prior patches ensured that any bio that interacts with a request_queue is properly associated with a blkg. This makes bio->bi_css unnecessary as blkg maintains a reference to blkcg already. This removes the bio field bi_css and transfers corresponding uses to access via bi_blkg. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: consolidate bio_issue_init() to be a part of coreDennis Zhou
bio_issue_init among other things initializes the timestamp for an IO. Rather than have this logic handled by policies, this consolidates it to be on the init paths (normal, clone, bounce clone). Signed-off-by: Dennis Zhou <dennis@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: associate blkg when associating a deviceDennis Zhou
Previously, blkg association was handled by controller specific code in blk-throttle and blk-iolatency. However, because a blkg represents a relationship between a blkcg and a request_queue, it makes sense to keep the blkg->q and bio->bi_disk->queue consistent. This patch moves association into the bio_set_dev macro(). This should cover the majority of cases where the device is set/changed keeping the two pointers consistent. Fallback code is added to blkcg_bio_issue_check() to catch any missing paths. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: convert blkg_lookup_create() to find closest blkgDennis Zhou
There are several scenarios where blkg_lookup_create() can fail such as the blkcg dying, request_queue is dying, or simply being OOM. Most handle this by simply falling back to the q->root_blkg and calling it a day. This patch implements the notion of closest blkg. During blkg_lookup_create(), if it fails to create, return the closest blkg found or the q->root_blkg. blkg_try_get_closest() is introduced and used during association so a bio is always attached to a blkg. Signed-off-by: Dennis Zhou <dennis@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: update blkg_lookup_create() to do lockingDennis Zhou
To know when to create a blkg, the general pattern is to do a blkg_lookup() and if that fails, lock and do the lookup again, and if that fails finally create. It doesn't make much sense for everyone who wants to do creation to write this themselves. This changes blkg_lookup_create() to do locking and implement this pattern. The old blkg_lookup_create() is renamed to __blkg_lookup_create(). If a call site wants to do its own error handling or already owns the queue lock, they can use __blkg_lookup_create(). This will be used in upcoming patches. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blkcg: fix ref count issue with bio_blkcg() using task_cssDennis Zhou
The bio_blkcg() function turns out to be inconsistent and consequently dangerous to use. The first part returns a blkcg where a reference is owned by the bio meaning it does not need to be rcu protected. However, the third case, the last line, is problematic: return css_to_blkcg(task_css(current, io_cgrp_id)); This can race against task migration and the cgroup dying. It is also semantically different as it must be called rcu protected and is susceptible to failure when trying to get a reference to it. This patch adds association ahead of calling bio_blkcg() rather than after. This makes association a required and explicit step along the code paths for calling bio_blkcg(). In blk-iolatency, association is moved above the bio_blkcg() call to ensure it will not return %NULL. BFQ uses the old bio_blkcg() function, but I do not want to address it in this series due to the complexity. I have created a private version documenting the inconsistency and noting not to use it. Signed-off-by: Dennis Zhou <dennis@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove the queue_lock indirectionChristoph Hellwig
With the legacy request path gone there is no good reason to keep queue_lock as a pointer, we can always use the embedded lock now. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Fixed floppy and blk-cgroup missing conversions and half done edits. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: remove QUEUE_FLAG_BYPASS and ->bypassChristoph Hellwig
Unused since the removal of the legacy request code. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove request_list codeJens Axboe
It's now dead code, nobody uses it. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-01blkcg: revert blkcg cleanups seriesDennis Zhou
This reverts a series committed earlier due to null pointer exception bug report in [1]. It seems there are edge case interactions that I did not consider and will need some time to understand what causes the adverse interactions. The original series can be found in [2] with a follow up series in [3]. [1] https://www.spinics.net/lists/cgroups/msg20719.html [2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/ This reverts the following commits: d459d853c2ed, b2c3fa546705, 101246ec02b5, b3b9f24f5fcc, e2b0989954ae, f0fcb3ec89f3, c839e7a03f92, bdc2491708c4, 74b7c02a9bc1, 5bf9a1f3b4ef, a7b39b4e961c, 07b05bcc3213, 49f4c2dc2b50, 27e6fa996c53 Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-20blkcg: fix edge case for blk_get_rl() under memory pressureDennis Zhou
It is possible for blkg creation to fail when in blk_get_rl(). In this situation, the fallback logic returns the nearest created blkg. There is however special handling for the request_list for the root blkcg. This fixes the missing edge case from the earlier series changing blk_get_rl(). Fixes: e2b0989954ae ("blkcg: cleanup and make blk_get_rl use blkg_lookup_create") Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: rename blkg_try_get to blkg_trygetDennis Zhou (Facebook)
blkg reference counting now uses percpu_ref rather than atomic_t. Let's make this consistent with css_tryget. This renames blkg_try_get to blkg_tryget and now returns a bool rather than the blkg or NULL. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: change blkg reference counting to use percpu_refDennis Zhou (Facebook)
Now that every bio is associated with a blkg, this puts the use of blkg_get, blkg_try_get, and blkg_put on the hot path. This switches over the refcnt in blkg to use percpu_ref. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: cleanup and make blk_get_rl use blkg_lookup_createDennis Zhou (Facebook)
blk_get_rl is responsible for identifying which request_list a request should be allocated to. Try get logic was added earlier, but semantically the logic was not changed. This patch makes better use of the bio already having a reference to the blkg in the hot path. The cold path uses a better fallback of blkg_lookup_create rather than just blkg_lookup and then falling back to the q->root_rl. If lookup_create fails with anything but -ENODEV, it falls back to q->root_rl. A clarifying comment is added to explain why q->root_rl is used rather than the root blkg's rl. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: remove additional reference to the cssDennis Zhou (Facebook)
The previous patch in this series removed carrying around a pointer to the css in blkg. However, the blkg association logic still relied on taking a reference on the css to ensure we wouldn't fail in getting a reference for the blkg. Here the implicit dependency on the css is removed. The association continues to rely on the tryget logic walking up the blkg tree. This streamlines the three ways that association can happen: normal, swap, and writeback. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: remove bio->bi_css and instead use bio->bi_blkgDennis Zhou (Facebook)
Prior patches ensured that all bios are now associated with some blkg. This now makes bio->bi_css unnecessary as blkg maintains a reference to the blkcg already. This patch removes the field bi_css and transfers corresponding uses to access via bi_blkg. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: consolidate bio_issue_init to be a part of coreDennis Zhou (Facebook)
bio_issue_init among other things initializes the timestamp for an IO. Rather than have this logic handled by policies, this consolidates it to be on the init paths (normal, clone, bounce clone). Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21blkcg: always associate a bio with a blkgDennis Zhou (Facebook)
Previously, blkg's were only assigned as needed by blk-iolatency and blk-throttle. bio->css was also always being associated while blkg was being looked up and then thrown away in blkcg_bio_issue_check. This patch begins the cleanup of bio->css and bio->bi_blkg by always associating a blkg in blkcg_bio_issue_check. This tries to create the blkg, but if it is not possible, falls back to using the root_blkg of the request_queue. Therefore, a bio will always be associated with a blkg. The duplicate association logic is removed from blk-throttle and blk-iolatency. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>