summaryrefslogtreecommitdiff
path: root/include/linux/evm.h
AgeCommit message (Collapse)Author
2021-06-02ima: Define new template fields xattrnames, xattrlengths and xattrvaluesRoberto Sassu
This patch defines the new template fields xattrnames, xattrlengths and xattrvalues, which contain respectively a list of xattr names (strings, separated by |), lengths (u32, hex) and values (hex). If an xattr is not present, the name and length are not displayed in the measurement list. Reported-by: kernel test robot <lkp@intel.com> (Missing prototype def) Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-01evm: Verify portable signatures against all protected xattrsRoberto Sassu
Currently, the evm_config_default_xattrnames array contains xattr names only related to LSMs which are enabled in the kernel configuration. However, EVM portable signatures do not depend on local information and a vendor might include in the signature calculation xattrs that are not enabled in the target platform. Just including all xattrs names in evm_config_default_xattrnames is not a safe approach, because a target system might have already calculated signatures or HMACs based only on the enabled xattrs. After applying this patch, EVM would verify those signatures and HMACs with all xattrs instead. The non-enabled ones, which could possibly exist, would cause a verification error. Thus, this patch adds a new field named enabled to the xattr_list structure, which is set to true if the LSM associated to a given xattr name is enabled in the kernel configuration. The non-enabled xattrs are taken into account only in evm_calc_hmac_or_hash(), if the passed security.evm type is EVM_XATTR_PORTABLE_DIGSIG. The new function evm_protected_xattr_if_enabled() has been defined so that IMA can include all protected xattrs and not only the enabled ones in the measurement list, if the new template fields xattrnames, xattrlengths or xattrvalues have been included in the template format. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-21evm: Pass user namespace to set/remove xattr hooksRoberto Sassu
In preparation for 'evm: Allow setxattr() and setattr() for unmodified metadata', this patch passes mnt_userns to the inode set/remove xattr hooks so that the GID of the inode on an idmapped mount is correctly determined by posix_acl_update_mode(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-21evm: Introduce evm_revalidate_status()Roberto Sassu
When EVM_ALLOW_METADATA_WRITES is set, EVM allows any operation on metadata. Its main purpose is to allow users to freely set metadata when it is protected by a portable signature, until an HMAC key is loaded. However, callers of evm_verifyxattr() are not notified about metadata changes and continue to rely on the last status returned by the function. For example IMA, since it caches the appraisal result, will not call again evm_verifyxattr() until the appraisal flags are cleared, and will grant access to the file even if there was a metadata operation that made the portable signature invalid. This patch introduces evm_revalidate_status(), which callers of evm_verifyxattr() can use in their xattr hooks to determine whether re-validation is necessary and to do the proper actions. IMA calls it in its xattr hooks to reset the appraisal flags, so that the EVM status is re-evaluated after a metadata operation. Lastly, this patch also adds a call to evm_reset_status() in evm_inode_post_setattr() to invalidate the cached EVM status after a setattr operation. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-15evm: provide a function to set the EVM key from the kernelDmitry Kasatkin
A crypto HW kernel module can possibly initialize the EVM key from the kernel __init code to enable EVM before calling the 'init' process. This patch provides a function evm_set_key() to set the EVM key directly without using the KEY subsystem. Changes in v4: * kernel-doc style for evm_set_key Changes in v3: * error reporting moved to evm_set_key * EVM_INIT_HMAC moved to evm_set_key * added bitop to prevent key setting race Changes in v2: * use size_t for key size instead of signed int * provide EVM_MAX_KEY_SIZE macro in <linux/evm.h> * provide EVM_MIN_KEY_SIZE macro in <linux/evm.h> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-03-27Remove spurious _H suffixes from ifdef commentsPaul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-14evm: posix acls modify i_modeMimi Zohar
The posix xattr acls are 'system' prefixed, which normally would not affect security.evm. An interesting side affect of writing posix xattr acls is their modifying of the i_mode, which is included in security.evm. This patch updates security.evm when posix xattr acls are written. Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-08-11evm: fix evm_inode_init_security return codeMimi Zohar
evm_inode_init_security() should return 0, when EVM is not enabled. (Returning an error is a remnant of evm_inode_post_init_security.) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-08-11evm: building without EVM enabled fixesMimi Zohar
- Missing 'inline' on evm_inode_setattr() definition. Introduced by commit 817b54aa45db ("evm: add evm_inode_setattr to prevent updating an invalid security.evm"). - Missing security_old_inode_init_security() stub function definition. Caused by commit 9d8f13ba3f48 ("security: new security_inode_init_security API adds function callback"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-07-18evm: add evm_inode_setattr to prevent updating an invalid security.evmMimi Zohar
Permit changing of security.evm only when valid, unless in fixmode. Reported-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-07-18evm: additional parameter to pass integrity cache entry 'iint'Dmitry Kasatkin
Additional iint parameter allows to skip lookup in the cache. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2011-07-18evm: add evm_inode_init_security to initialize new filesMimi Zohar
Initialize 'security.evm' for new files. Changelog v7: - renamed evm_inode_post_init_security to evm_inode_init_security - moved struct xattr definition to earlier patch - allocate xattr name Changelog v6: - Use 'struct evm_ima_xattr_data' Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-07-18evm: imbed evm_inode_post_setattrMimi Zohar
Changing the inode's metadata may require the 'security.evm' extended attribute to be re-calculated and updated. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2011-07-18evm: evm_inode_post_removexattrMimi Zohar
When an EVM protected extended attribute is removed, update 'security.evm'. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2011-07-18security: imbed evm calls in security hooksMimi Zohar
Imbed the evm calls evm_inode_setxattr(), evm_inode_post_setxattr(), evm_inode_removexattr() in the security hooks. evm_inode_setxattr() protects security.evm xattr. evm_inode_post_setxattr() and evm_inode_removexattr() updates the hmac associated with an inode. (Assumes an LSM module protects the setting/removing of xattr.) Changelog: - Don't define evm_verifyxattr(), unless CONFIG_INTEGRITY is enabled. - xattr_name is a 'const', value is 'void *' Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>