summaryrefslogtreecommitdiff
path: root/include/linux/leds.h
AgeCommit message (Collapse)Author
2024-03-07leds: Fix ifdef check for gpio_led_register_device()Arnd Bergmann
gpio_led_register_device() is built whenever CONFIG_LEDS_GPIO_REGISTER is enabled, and this may be used even when CONFIG_NEW_LEDS is turned off. However, the stub declaration in the header is provided for all configs without CONFIG_NEW_LEDS, resulting in a build failure: drivers/leds/leds-gpio-register.c:24:1: error: redefinition of 'gpio_led_register_device' 24 | gpio_led_register_device(int id, const struct gpio_led_platform_data *pdata) | ^ include/linux/leds.h:646:39: note: previous definition is here Change the #ifdef check to match the definition. Note: this apparently took years of randconfig builds to hit, since a number of other drivers just 'select NEW_LEDS' anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240228093834.2230004-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2024-03-07leds: Remove led_init_default_state_get() and ↵Arnd Bergmann
devm_led_classdev_register_ext() stubs These two functions have stub implementations that are called when NEW_LEDS and/or LEDS_CLASS are disabled, theorerically allowing drivers to optionally use the LED subsystem. However, this has never really worked because a built-in driver is unable to link against these functions if the LED class is in a loadable module. Heiner ran into this problem with a driver that newly gained a LEDS_CLASS dependency and suggested using an IS_REACHABLE() check. This is the reverse approach, removing the stub entirely to acknowledge that it is pointless in its current form, and that not having it avoids misleading developers into thinking that they can rely on it. This survived around 1000 randconfig builds to validate that any callers of the interface already have the correct Kconfig dependency already, with the exception of the one that Heiner just added. Cc: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/linux-leds/0f6f432b-c650-4bb8-a1b5-fe3372804d52@gmail.com/T/#u Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240109090715.982332-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-12-13leds: trigger: Remove unused function led_trigger_rename_static()Heiner Kallweit
This function was added with a8df7b1ab70b ("leds: add led_trigger_rename function") 11 yrs ago, but it has no users. So remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/d90f30be-f661-4db7-b0b5-d09d07a78a68@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-12-13leds: trigger: netdev: Extend speeds up to 10GDaniel Golle
Add 2.5G, 5G and 10G as available speeds to the netdev LED trigger. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/99e7d3304c6bba7f4863a4a80764a869855f2085.1701143925.git.daniel@makrotopia.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-08-17leds: class: Store the color index in struct led_classdevJean-Jacques Hiblot
Store the color of the LED so that it is not lost after the LED's name has been composed. This color information can then be exposed to the user space or used by the LED consumer. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Link: https://lore.kernel.org/r/20230728153731.3742339-3-jjhiblot@traphandler.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-08-17leds: Provide devm_of_led_get_optional()Jean-Jacques Hiblot
Add an optional variant of devm_of_led_get(). It behaves the same as devm_of_led_get() except where the LED doesn't exist. In this case, instead of returning -ENOENT, the function returns NULL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230728153731.3742339-2-jjhiblot@traphandler.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-07-03Merge tag 'leds-next-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "New Drivers: - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs - Add support for Awinic AW20036/AW20054/AW20072 LEDs New Device Support: - Add support for PMI632 LPG to QCom LPG - Add support for PMI8998 to QCom Flash - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC New Functionality: - Implement the LP55xx Charge Pump - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC - Enable per-pin resolution Pinctrl in LEDs GPIO Fix-ups: - Allow thread to sleep by switching from spinlock to mutex - Add lots of Device Tree bindings / support - Adapt relationships / dependencies driven by Kconfig - Switch I2C drivers from .probe_new() to .probe() - Remove superfluous / duplicate code - Replace strlcpy() with strscpy() for efficiency and overflow prevention - Staticify various functions - Trivial: Fixing coding style - Simplify / reduce code Bug Fixes: - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename - Repair race between led_set_brightness(LED_{OFF,FULL}) - Fix Oops relating to sleeping in critical sections - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger - Do not leak resources in error handling paths - Fix unsigned comparison which can never be negative - Provide missing NULL terminating entries in tables - Fix misnaming issues" * tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits) leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks leds: sgm3140: Add richtek,rt5033-led compatible dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks" dt-bindings: leds: Drop unneeded quotes leds: Fix config reference for AW200xx driver leds: leds-mt6323: Add support for WLEDs and MT6332 leds: leds-mt6323: Add support for MT6331 leds leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro leds: leds-mt6323: Drop MT6323_ prefix from macros and defines leds: leds-mt6323: Specify registers and specs in platform data dt-bindings: leds: leds-mt6323: Document mt6332 compatible dt-bindings: leds: leds-mt6323: Document mt6331 compatible leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches leds: simatic-ipc-leds-gpio: Split up into multiple drivers leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative leds: cht-wcove: Remove unneeded semicolon leds: cht-wcove: Fix an unsigned comparison which can never be negative ...
2023-06-21leds: trigger: netdev: add additional specific link duplex modeChristian Marangi
Add additional modes for specific link duplex. Use ethtool APIs to get the current link duplex and enable the LED accordingly. Under netdev event handler the rtnl lock is already held and is not needed to be set to access ethtool APIs. This is especially useful for PHY and Switch that supports LEDs hw control for specific link duplex. Add additional modes: - half_duplex: Turn on LED when link is half duplex - full_duplex: Turn on LED when link is full duplex Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21leds: trigger: netdev: add additional specific link speed modeChristian Marangi
Add additional modes for specific link speed. Use ethtool APIs to get the current link speed and enable the LED accordingly. Under netdev event handler the rtnl lock is already held and is not needed to be set to access ethtool APIs. This is especially useful for PHY and Switch that supports LEDs hw control for specific link speed. (example scenario a PHY that have 2 LED connected one green and one orange where the green is turned on with 1000mbps speed and orange is turned on with 10mpbs speed) On mode set from sysfs we check if we have enabled split link speed mode and reject enabling generic link mode to prevent wrong and redundant configuration. Rework logic on the set baseline state to support these new modes to select if we need to turn on or off the LED. Add additional modes: - link_10: Turn on LED when link speed is 10mbps - link_100: Turn on LED when link speed is 100mbps - link_1000: Turn on LED when link speed is 1000mbps Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-31leds: trigger: netdev: expose netdev trigger modes in linux includeChristian Marangi
Expose netdev trigger modes to make them accessible by LED driver that will support netdev trigger for hw control. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31leds: add API to get attached device for LED hw controlAndrew Lunn
Some specific LED triggers blink the LED based on events from a device or subsystem. For example, an LED could be blinked to indicate a network device is receiving packets, or a disk is reading blocks. To correctly enable and request the hw control of the LED, the trigger has to check if the network interface or block device configured via a /sys/class/led file match the one the LED driver provide for hw control for. Provide an API call to get the device which the LED blinks for. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31leds: add APIs for LEDs hw controlChristian Marangi
Add an option to permit LED driver to declare support for a specific trigger to use hw control and setup the LED to blink based on specific provided modes. Add APIs for LEDs hw control. These functions will be used to activate hardware control where a LED will use the provided flags, from an unique defined supported trigger, to setup the LED to be driven by hardware. Add hw_control_is_supported() to ask the LED driver if the requested mode by the trigger are supported and the LED can be setup to follow the requested modes. Deactivate hardware blink control by setting brightness to LED_OFF via the brightness_set() callback. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-25leds: Fix oops about sleeping in led_trigger_blink()Hans de Goede
led_trigger_blink() calls led_blink_set() from a RCU read-side critical section so led_blink_set() must not sleep. Note sleeping was not allowed before the switch to RCU either because a spinlock was held before. led_blink_set() does not sleep when sw-blinking is used, but many LED controller drivers with hw blink support have a blink_set function which may sleep, leading to an oops like this one: [ 832.605062] ------------[ cut here ]------------ [ 832.605085] Voluntary context switch within RCU read-side critical section! [ 832.605119] WARNING: CPU: 2 PID: 370 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x4ee/0x690 <snip> [ 832.606453] Call Trace: [ 832.606466] <TASK> [ 832.606487] __schedule+0x9f/0x1480 [ 832.606527] schedule+0x5d/0xe0 [ 832.606549] schedule_timeout+0x79/0x140 [ 832.606572] ? __pfx_process_timeout+0x10/0x10 [ 832.606599] wait_for_completion_timeout+0x6f/0x140 [ 832.606627] i2c_dw_xfer+0x101/0x460 [ 832.606659] ? psi_group_change+0x168/0x400 [ 832.606680] __i2c_transfer+0x172/0x6d0 [ 832.606709] i2c_smbus_xfer_emulated+0x27d/0x9c0 [ 832.606732] ? __schedule+0x430/0x1480 [ 832.606753] ? preempt_count_add+0x6a/0xa0 [ 832.606778] ? get_nohz_timer_target+0x18/0x190 [ 832.606796] ? lock_timer_base+0x61/0x80 [ 832.606817] ? preempt_count_add+0x6a/0xa0 [ 832.606842] __i2c_smbus_xfer+0xa2/0x3f0 [ 832.606862] i2c_smbus_xfer+0x66/0xf0 [ 832.606882] i2c_smbus_read_byte_data+0x41/0x70 [ 832.606901] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 832.606922] ? __pm_runtime_suspend+0x46/0xc0 [ 832.606946] cht_wc_byte_reg_read+0x2e/0x60 [ 832.606972] _regmap_read+0x5c/0x120 [ 832.606997] _regmap_update_bits+0x96/0xc0 [ 832.607023] regmap_update_bits_base+0x5b/0x90 [ 832.607053] cht_wc_leds_brightness_get+0x412/0x910 [leds_cht_wcove] [ 832.607094] led_blink_setup+0x28/0x100 [ 832.607119] led_trigger_blink+0x40/0x70 [ 832.607145] power_supply_update_leds+0x1b7/0x1c0 [ 832.607174] power_supply_changed_work+0x67/0xe0 [ 832.607198] process_one_work+0x1c8/0x3c0 [ 832.607222] worker_thread+0x4d/0x380 [ 832.607243] ? __pfx_worker_thread+0x10/0x10 [ 832.607258] kthread+0xe9/0x110 [ 832.607279] ? __pfx_kthread+0x10/0x10 [ 832.607300] ret_from_fork+0x2c/0x50 [ 832.607337] </TASK> [ 832.607344] ---[ end trace 0000000000000000 ]--- Add a new led_blink_set_nosleep() function which defers the actual led_blink_set() call to a workqueue when necessary to fix this. This also fixes an existing race where a pending led_set_brightness() has been deferred to set_brightness_work and might then race with a later led_cdev->blink_set() call. Note this race is only an issue with triggers mixing led_trigger_event() and led_trigger_blink() calls, sysfs API calls and led_trigger_blink_oneshot() are not affected. Note rather then adding a separate blink_set_blocking callback this uses the presence of the already existing brightness_set_blocking callback to detect if the blinking call should be deferred to set_brightness_work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Tested-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://lore.kernel.org/r/20230510162234.291439-4-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-05-25leds: Fix set_brightness_delayed() raceHans de Goede
When a trigger wants to switch from blinking to LED on it needs to call: led_set_brightness(LED_OFF); led_set_brightness(LED_FULL); To first call disables blinking and the second then turns the LED on (the power-supply charging-blink-full-solid triggers do this). These calls happen immediately after each other, so it is possible that set_brightness_delayed() from the first call has not run yet when the led_set_brightness(LED_FULL) call finishes. If this race hits then this is causing problems for both sw- and hw-blinking: For sw-blinking set_brightness_delayed() clears delayed_set_value when LED_BLINK_DISABLE is set causing the led_set_brightness(LED_FULL) call effects to get lost when hitting the race, resulting in the LED turning off instead of on. For hw-blinking if the race hits delayed_set_value has been set to LED_FULL by the time set_brightness_delayed() runs. So led_cdev->brightness_set_blocking() is never called with LED_OFF as argument and the hw-blinking is never disabled leaving the LED blinking instead of on. Fix both issues by adding LED_SET_BRIGHTNESS and LED_SET_BRIGHTNESS_OFF work_flags making this 2 separate actions to be run by set_brightness_delayed(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Tested-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://lore.kernel.org/r/20230510162234.291439-3-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-05-25leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-valueHans de Goede
led_blink_set[_oneshot]()'s delay_on and delay_off function parameters are pass by reference, so that hw-blink implementations can report back the actual achieved delays when the values have been rounded to something the hw supports. This is really only interesting for the sysfs API / the timer trigger. Other triggers don't really care about this and none of the callers of led_trigger_blink[_oneshot]() do anything with the returned delay values. Change the led_trigger_blink[_oneshot]() delay parameters to pass-by-value, there are 2 reasons for this: 1. led_cdev->blink_set() may sleep, while led_trigger_blink() may not. So on hw where led_cdev->blink_set() sleeps the call needs to be deferred to a workqueue, in which case the actual achieved delays are unknown (this is a preparation patch for the deferring). 2. Since the callers don't care about the actual achieved delays, allowing callers to directly pass a value leads to simpler code for most callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Tested-by: Yauhen Kharuzhy <jekhor@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230510162234.291439-2-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-05-02Merge tag 'leds-next-6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "New Drivers: - Add support for MediaTek MT6370 LED Indicator - Add support for MediaTek MT6370 Flashlight - Add support for QCOM PMIC Flash - Add support for Rohm BD2606MVV Charge Pump LED New Device Support: - Add support for PMK8550 PWM to QCOM LPG New Functionality: - Add support for high resolution PWM to QCOM LPG Fix-ups: - Kconfig 'depends' and 'select' dependency changes - Remove unused / irrelevant includes - Remove unnecessary checks (already performed further into the call stack) - Trivial: Fix commentary, simplify error messages - Rid 'defined but not used' warnings - Provide documentation - Explicitly provide include files Bug Fixes: - Mark GPIO LED as BROKEN - Fix Kconfig entries - Fix various Smatch staticify reports - Fix error handling (or a lack there of)" * tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits) leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver dt-bindings: leds: Add ROHM BD2606MVV LED docs: leds: ledtrig-oneshot: Fix spelling mistake leds: pwm-multicolor: Simplify an error message dt-bindings: leds: Convert PCA9532 to dtschema leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM leds: rgb: leds-qcom-lpg: Add support for high resolution PWM dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string leds: tca6507: Fix error handling of using fwnode_property_read_string leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB MAINTAINERS: Add entry for LED devices documentation Documentation: leds: MT6370: Use bullet lists for timing variables Documentation: leds: mt6370: Properly wrap hw_pattern chart Documentation: leds: Add MT6370 doc to the toctree leds: rgb: mt6370: Fix implicit declaration for FIELD_GET docs: leds: Add MT6370 RGB LED pattern document leds: flash: mt6370: Add MediaTek MT6370 flashlight support leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support dt-bindings: leds: spmi-flash-led: Add pm6150l compatible ...
2023-04-19leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabledAndrew Lunn
Provide stubs for devm_led_classdev_register_ext() and led_init_default_state_get() so that LED drivers embedded within other drivers such as PHYs and Ethernet switches still build when LEDS_CLASS or NEW_LEDS are disabled. This also helps with Kconfig dependencies, which are somewhat hairy for phylib and mdio and only get worse when adding a dependency on LED_CLASS. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16leds: Fix reference to led_set_brightness() in docThomas Weißschuh
The referenced function led_classdev_brightness_set() never existed. Fixes: 5ada28bf7675 ("led-class: always implement blinking") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230218-typo-led-set-v1-1-3c35362a2f2d@weissschuh.net
2023-01-30leds: Move led_init_default_state_get() to the global headerAndy Shevchenko
There are users inside and outside LED framework that have implemented a local copy of led_init_default_state_get(). In order to deduplicate that, as the first step move the declaration from LED header to the global one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230103131256.33894-3-andriy.shevchenko@linux.intel.com
2023-01-30leds: Add missing includes and forward declarations in leds.hAndy Shevchenko
Add missing includes and forward declarations to leds.h. While at it, replace headers by forward declarations and vise versa. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230103131256.33894-2-andriy.shevchenko@linux.intel.com
2023-01-27leds: led-class: Add generic [devm_]led_get()Hans de Goede
Add a generic [devm_]led_get() method which can be used on both devicetree and non devicetree platforms to get a LED classdev associated with a specific function on a specific device, e.g. the privacy LED associated with a specific camera sensor. Note unlike of_led_get() this takes a string describing the function rather then an index. This is done because e.g. camera sensors might have a privacy LED, or a flash LED, or both and using an index approach leaves it unclear what the function of index 0 is if there is only 1 LED. This uses a lookup-table mechanism for non devicetree platforms. This allows the platform code to map specific LED class_dev-s to a specific device,function combinations this way. For devicetree platforms getting the LED by function-name could be made to work using the standard devicetree pattern of adding a -names string array to map names to the indexes. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120114524.408368-5-hdegoede@redhat.com
2021-09-27leds: trigger: use RCU to protect the led_cdevs listJohannes Berg
Even with the previous commit 27af8e2c90fb ("leds: trigger: fix potential deadlock with libata") to this file, we still get lockdep unhappy, and Boqun explained the report here: https://lore.kernel.org/r/YNA+d1X4UkoQ7g8a@boqun-archlinux Effectively, this means that the read_lock_irqsave() isn't enough here because another CPU might be trying to do a write lock, and thus block the readers. This is all pretty messy, but it doesn't seem right that the LEDs framework imposes some locking requirements on users, in particular we'd have to make the spinlock in the iwlwifi driver always disable IRQs, even if we don't need that for any other reason, just to avoid this deadlock. Since writes to the led_cdevs list are rare (and are done by userspace), just switch the list to RCU. This costs a synchronize_rcu() at removal time so we can ensure things are correct, but that seems like a small price to pay for getting lock-free iterations and no deadlocks (nor any locking requirements imposed on users.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-18leds: move default_state read from fwnode to coreDenis Osterland-Heim
This patch introduces a new function to read initial default_state from fwnode. Suggested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Denis Osterland-Heim <Denis.Osterland@diehl.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-19leds: led-core: Get rid of enum led_brightnessAbanoub Sameh
This gets rid of enum led_brightness in the main led files, because it is deprecated, and an unsigned int can be used instead. We can get rid of led_brightness completely and patches can also be supplied for the other drivers' files. Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-22leds: trigger: add support for LED-private device triggersMarek Behún
Some LED controllers may come with an internal HW triggering mechanism for the LED and the ability to switch between SW control and the internal HW control. This includes most PHYs, various ethernet switches, the Turris Omnia LED controller or AXP20X PMIC. This adds support for registering such triggers. This code is based on work by Pavel Machek <pavel@ucw.cz> and Ondřej Jirman <megous@megous.com>. Signed-off-by: Marek Behún <marek.behun@nic.cz> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-04-06leds: old enums are not really applicable to new codePavel Machek
Warn about old defines that probably should not be used. Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-01-06leds: Add managed API to get a LED from a device driverJean-Jacques Hiblot
If the LED is acquired by a consumer device with devm_led_get(), it is automatically released when the device is detached. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-01-06leds: Add of_led_get() and led_put()Tomi Valkeinen
This patch adds basic support for a kernel driver to get a LED device. This will be used by the led-backlight driver. Only OF version is implemented for now, and the behavior is similar to PWM's of_pwm_get() and pwm_put(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-11-03leds: core: Fix leds.h structure documentationDan Murphy
Update the leds.h structure documentation to define the correct arguments. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-11-03leds: core: Remove extern from headerDan Murphy
extern is implied and is not needed in the header file. Remove the extern keyword and re-align the code. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-11-03leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/triggerAkinobu Mita
Reading /sys/class/leds/<led>/trigger returns all available LED triggers. However, the size of this file is limited to PAGE_SIZE because of the limitation for sysfs attribute. Enabling LED CPU trigger on systems with thousands of CPUs easily hits PAGE_SIZE limit, and makes it impossible to see all available LED triggers and which trigger is currently activated. We work around it here by converting /sys/class/leds/<led>/trigger to binary attribute, which is not limited by length. This is _not_ good design, do not copy it. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dan Murphy <dmurphy@ti.com>A Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-09-01leds: Replace {devm_}led_classdev_register() macros with inlinesJacek Anaszewski
Replace preprocessor macro aliases for legacy LED registration helpers with inline functions. It will allow to avoid misleading compiler error messages about missing symbol that actually wasn't explicitly used in the code. It used to occur when CONFIG_LEDS_CLASS was undefined and legacy (non-ext) function had been used in the code. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz>
2019-07-25leds: core: Add support for composing LED class device namesJacek Anaszewski
Add generic support for composing LED class device name. The newly introduced led_compose_name() function composes device name according to either <color:function> or <devicename:color:function> pattern, depending on the configuration of initialization data. Backward compatibility with in-driver hard-coded LED class device names is assured thanks to the default_label and devicename properties of newly introduced struct led_init_data. In case none of the aforementioned properties was found, then, for OF nodes, the node name is adopted for LED class device name. At the occassion of amending the Documentation/leds/leds-class.txt unify spelling: colour -> color. Alongside these changes added is a new tool - tools/leds/get_led_device_info.sh. The tool allows retrieving details of a LED class device's parent device, which proves that using vendor or product name for devicename part of LED name doesn't convey any added value since that information had been already available in sysfs. The script performs also basic validation of a LED class device name. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Baolin Wang <baolin.wang@linaro.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Simon Shields <simon@lineageos.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz>
2019-07-25leds: class: Improve LED and LED flash class registration APIJacek Anaszewski
Replace of_led_classdev_register() with led_classdev_register_ext(), which accepts easily extendable struct led_init_data, instead of the fixed struct device_node argument. The latter can be now passed in an fwnode property of the struct led_init_data. The modification is driven by the need for passing additional arguments required for the forthcoming generic mechanism for composing LED names. Currently the LED name is conveyed in the "name" char pointer property of the struct led_classdev. This is redundant since LED class device name is accessible throughout the whole LED class device life time via associated struct device's kobj->name property. The change will not break any existing clients since the patch alters also existing led_classdev{_flash}_register() macro wrappers, that pass NULL in place of init_data, which leads to using legacy name initialization path basing on the struct led_classdev's "name" property. Three existing users of devm_of_led_classdev_registers() are modified to use devm_led_classdev_register(), which will not impact their operation since they in fact didn't need to pass struct device_node on registration from the beginning. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Baolin Wang <baolin.wang@linaro.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16leds: Add helper for getting default pattern from Device TreeKrzysztof Kozlowski
Multiple LED triggers might need to access default pattern so add a helper for that. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-25Merge tag 'leds-for-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "There are several few-liners, where most of them are fixes and improvments. One thing standing out is ground preparation for inititializing trigger parameters via Device Tree. We introduce LED_INIT_DEFAULT_TRIGGER flag for that purpose and set it when default trigger is matched. It indicates that trigger should parse DT properties to retrieve the initialization data when set as default one" * tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought after class led: triggers: Add LED_INIT_DEFAULT_TRIGGER flag led: triggers: Break the for loop after default trigger is found leds: pwm: Use OF variant of LED registering function leds: pwm: Simplify with resource-managed devm_led_classdev_register() leds: gpio: Drop unneeded manual of_node assignment leds: 88pm860x: Use of_node_name_eq for node name comparisons leds: powernv: add of_node_put()
2018-12-10led: triggers: Add LED_INIT_DEFAULT_TRIGGER flagJacek Anaszewski
Add the flag LED_INIT_DEFAULT_TRIGGER for indicating that trigger being set is a default trigger for the LED class device, and thus it should be initialized with settings provided in the fwnode. Set the flag in the led_trigger_set_default(). It is expected to be cleared in the activate() op of a trigger after trigger fwnode initialization data is parsed and applied. This should happen only once after LED class device registration, to allow leaving triggers in the idle state on re-apply and let the users apply their own settings without interference from the default ones. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-11-28leds: trigger: Introduce audio mute LED triggerTakashi Iwai
This patch adds a new LED trigger for coupling the audio mixer change with the LED on laptops or other devices. Currently there are two trigger types, "audio-mute" and "audio-micmute". The audio driver triggers the LED brightness change via ledtrig_audio_set() call with the proper type (either mute or mic-mute). OTOH, the consumers may call ledtrig_audio_get() for the initial brightness value that may have been set by the audio driver beforehand. This new stuff will be used by HD-audio codec driver and some platform drivers (thinkpad_acpi and dell-laptop, also upcoming huawei-wmi). Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-11leds: core: Introduce LED pattern triggerBaolin Wang
This patch adds a new LED trigger that LED device can configure to employ software or hardware pattern engine. Consumers can write 'pattern' file to enable the software pattern which alters the brightness for the specified duration with one software timer. Moreover consumers can write 'hw_pattern' file to enable the hardware pattern for some LED controllers which can autonomously control brightness over time, according to some preprogrammed hardware patterns. Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: new function led_set_trigger_data()Uwe Kleine-König
This is the natural counter part to the already existing led_get_trigger_data(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: define module_led_trigger helperUwe Kleine-König
This helps to simplify modules that provide a simple led_trigger. It's inspired by module_platform_driver, module_i2c_driver et al. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: add device attribute supportUwe Kleine-König
As many triggers use device attributes, add support for these in led_trigger_set which allows simplifying the drivers accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: let struct led_trigger::activate() return an error codeUwe Kleine-König
Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-03-11leds: Extends disk trigger for reads and writesLinus Walleij
This adds two new disk triggers for triggering on reads and writes respectively, named "disk-read" and "disk-write". The use case comes from working on the D-Link DNS-313 NAS box. This features an RGB LED for disk activity. with these two triggers I can couple the green LED to read activity and the red LED to write activity, which gives the appropriate user feedback about what is happening on the disk. When tested it gave exactly the feedback desired. The in-kernel interface is simply changed to pass a bool indicating if the activity is write activity and update each trigger (and the composite "disk-activity" trigger) depending on what is passed in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-10-06leds: Replace flags bit shift with BIT() macrosDavid Lin
This is for readability as well as to avoid checkpatch warnings when adding new bit flag information in the future. Signed-off-by: David Lin <dtwlin@google.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: gpio: Allow LED to retain state at shutdownAndrew Jeffery
In some systems, such as Baseboard Management Controllers (BMCs), we want to retain the state of LEDs across a reboot of the BMC (whilst the host remains up). Implement support for the retain-state-shutdown devicetree property in leds-gpio. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-08leds: core: add OF variants of LED registering functionsRafał Miłecki
These new functions allow passing an additional device_node argument that will be internally set for created LED device. Thanks to this LED core code and triggers will be able to access DT node for reading extra info. The easiest solution for achieving this was reworking old functions to more generic ones & adding simple defines for API compatibility. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-01-29leds: class: Add new optional brightness_hw_changed attributeHans de Goede
Some LEDs may have their brightness level changed autonomously (outside of kernel control) by hardware / firmware. This commit adds support for an optional brightness_hw_changed attribute to signal such changes to userspace (if a driver can detect them): What: /sys/class/leds/<led>/brightness_hw_changed Date: January 2017 KernelVersion: 4.11 Description: Last hardware set brightness level for this LED. Some LEDs may be changed autonomously by hardware/firmware. Only LEDs where this happens and the driver can detect this, will have this file. This file supports poll() to detect when the hardware changes the brightness. Reading this file will return the last brightness level set by the hardware, this may be different from the current brightness. Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to their flags field and call led_classdev_notify_brightness_hw_changed() with the hardware set brightness when they detect a hardware / firmware triggered brightness change. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-01-05leds: add LED_ON brightness as boolean valueAndi Shyti
Some devices do not handle the led brightness or simply don't care about it. Conceptually said devices want to just switch on or off the led. It is useless in this case to have a 255 range of brightness, while just having an LED_ON and LED_OFF improves the boolean meaning of the led status. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
generated by cgit (git 2.34.1) at 2024-05-27 18:13:37 +0000