summaryrefslogtreecommitdiff
path: root/include/linux/libata.h
AgeCommit message (Collapse)Author
2021-11-12libata: add horkage for missing Identify Device logDamien Le Moal
ACS-3 introduced the ATA Identify Device Data log as mandatory. A warning message currently signals to the user if a device does not report supporting this log page in the log directory page, regardless of the ATA version of the device. Furthermore, this warning will appear for all attempts at accessing this missing log page during device revalidation. Since it is useless to constantly access the log directory and warn about this lack of support once we have discovered that the device does not support this log page, introduce the horkage flag ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for the Identify Device Data log page. Set this flag when ata_log_supported() returns false in ata_identify_page_supported(). The warning is printed only if the device ATA level is 10 or above (ACS-3 or above), and only once on device scan. With this flag set, the log directory page is not accessed again to test for Identify Device Data log page support. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-11libata: fix read log timeout valueDamien Le Moal
Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-10-26libata: support concurrent positioning ranges logDamien Le Moal
Add support to discover if an ATA device supports the Concurrent Positioning Ranges data log (address 0x47), indicating that the device is capable of seeking to multiple different locations in parallel using multiple actuators serving different LBA ranges. Also add support to translate the concurrent positioning ranges log into its equivalent Concurrent Positioning Ranges VPD page B9h in libata-scsi.c. The format of the Concurrent Positioning Ranges Log is defined in ACS-5 r9. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-16scsi: ata: Switch to attribute groupsBart Van Assche
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-3-bvanassche@acm.org Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-03libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.Kate Hsuan
Many users are reporting that the Samsung 860 and 870 SSD are having various issues when combined with AMD/ATI (vendor ID 0x1002) SATA controllers and only completely disabling NCQ helps to avoid these issues. Always disabling NCQ for Samsung 860/870 SSDs regardless of the host SATA adapter vendor will cause I/O performance degradation with well behaved adapters. To limit the performance impact to ATI adapters, introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ only for these adapters. Also, two libata.force parameters (noncqati and ncqati) are introduced to disable and enable the NCQ for the system which equipped with ATI SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ function to be enabled or disabled according to the demand. After verifying the chipset from the user reports, the issue appears on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on recent AMD SATA adapters. The vendor ID of ATI should be 0x1002. Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to ATA_HORKAGE_NO_NCQ_ON_ATI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693 Signed-off-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24include:libata: fix boolreturn.cocci warningsJing Yangyang
./include/linux/libata.h:1462:8-9:WARNING: return of 0/1 in function 'ata_is_host_link' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Link: https://lore.kernel.org/r/20210824060702.59006-1-deng.changcheng@zte.com.cn Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-18libata: Introduce ncq_prio_supported sysfs sttributeDamien Le Moal
Currently, the only way a user can determine if a SATA device supports NCQ priority is to try to enable the use of this feature using the ncq_prio_enable sysfs device attribute. If enabling the feature fails, it is because the device does not support NCQ priority. Otherwise, the feature is enabled and success indicates that the device supports NCQ priority. Improve this odd interface by introducing the read-only ncq_prio_supported sysfs device attribute to indicate if a SATA device supports NCQ priority. The value of this attribute reflects the status of device flag ATA_DFLAG_NCQ_PRIO, which is set only for devices supporting NCQ priority. Add this new sysfs attribute to the device attributes group of libahci and libata-sata. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20210816014456.2191776-10-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-18libata: print feature list on device scanDamien Le Moal
Print a list of features supported by a drive when it is configured in ata_dev_configure() using the new function ata_dev_print_features(). The features printed are not already advertized and are: trusted send-recev support, device attention support, device sleep support, NCQ send-recv support and NCQ priority support. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210816014456.2191776-9-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-16ata: include: libata: Move fields commonly over-written to separate MACROLee Jones
This is a pre-cursor to some upcoming W=1 fix-ups. Fixes the following W=1 kernel build warning(s): Cc: Jens Axboe <axboe@kernel.dk> Cc: Mark Lord <mlord@pobox.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210528090502.1799866-2-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to SandisksTejun Heo
All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Karthik Shivaram <karthikgs@fb.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six small fixes, five in drivers and one to correct another minor regression from cc97923a5bcc ("block: move dma drain handling to scsi") where we still need the drain stub to be built in to the kernel for the modular libata, non-modular SAS driver case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptscsih: Fix read sense data size scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() scsi: libata: Fix the ata_scsi_dma_need_drain stub scsi: qla2xxx: Keep initiator ports after RSCN scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
2020-06-23scsi: libata: Fix the ata_scsi_dma_need_drain stubChristoph Hellwig
We not only need the stub when libata is disabled, but also if it is modular and there are built-in SAS drivers (which can happen when SCSI_SAS_ATA is disabled). Link: https://lore.kernel.org/r/20200620071302.462974-2-hch@lst.de Fixes: b8f1d1e05817 ("scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One minor fix and two patches reworking the ata dma drain for the !CONFIG_LIBATA case. The latter is a 5.7 regression fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA scsi: ufs-bsg: Fix runtime PM imbalance on error
2020-06-19Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fixes from Jens Axboe: "A few minor changes that should go into this release" * tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block: libata: Use per port sync for detach ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function sata_rcar: handle pm_runtime_get_sync failure cases
2020-06-18libata: Use per port sync for detachKai-Heng Feng
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: John Garry <john.garry@huawei.com> BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15libata: Replace zero-length array with flexible-arrayGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-15scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATAChristoph Hellwig
SAS drivers can be compiled with ata support disabled. Provide a stub so that the drivers don't have to ifdef around wiring up ata_scsi_dma_need_drain. Link: https://lore.kernel.org/r/20200615064624.37317-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22block: move dma drain handling to scsiChristoph Hellwig
Don't burden the common block code with with specifics of the libata DMA draining mechanism. Instead move most of the code to the scsi midlayer. That also means the nr_phys_segments adjustments in the blk-mq fast path can go away entirely, given that SCSI never looks at nr_phys_segments after mapping the request to a scatterlist. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.cBartlomiej Zolnierkiewicz
* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to libata-sata.c * add static inline for ata_eh_analyze_ncq_error() for CONFIG_SATA_HOST=n case (link->sactive is non-zero only if NCQ commands are actually queued so empty function body is sufficient) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o after: 15446 18 0 15464 3c68 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-eh.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-eh.c: * move sata_async_notification() to libata-sata.c: Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16243 18 0 16261 3f85 drivers/ata/libata-eh.o after: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_sas_*() to libata-sata.cBartlomiej Zolnierkiewicz
* un-inline: - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * un-static: - ata_scsi_sdev_config() - ata_scsi_dev_config() - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * move ata_sas_*() to libata-sata.c: * add static inlines for CONFIG_SATA_HOST=n case for ata_sas_{allocate,free}_tag() Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o after: 18330 23 576 18929 49f1 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-scsi.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-scsi.c: * un-static ata_scsi_find_dev() * move following code to libata-sata.c: - SATA only sysfs device attributes handling - __ata_change_queue_depth() - ata_scsi_change_queue_depth() * cover with CONFIG_SATA_HOST ifdef SATA only sysfs device attributes handling code and ATA_SHT_NCQ() macro in <linux/libata.h> Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20702 105 576 21383 5387 drivers/ata/libata-scsi.o after: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_deb_timing_*() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_deb_timing_*() to libata-sata.c * add static inline for sata_ehc_deb_timing() for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32158 572 40 32770 8002 drivers/ata/libata-core.o after: 32015 572 40 32627 7f73 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_qc_complete_multiple() to libata-sata.cBartlomiej Zolnierkiewicz
* move ata_qc_complete_multiple() to libata-sata.c Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32559 572 40 33171 8193 drivers/ata/libata-core.o after: 32162 572 40 32774 8006 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_hardreset() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_link_hardreset() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case * make sata_set_spd_needed() static Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32724 572 40 33336 8238 drivers/ata/libata-core.o after: 32559 572 40 33171 8193 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_{debounce,resume}() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_link_{debounce,resume}() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case (only one, for sata_link_resume() is needed) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32816 572 40 33428 8294 drivers/ata/libata-core.o after: 32724 572 40 33336 8238 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move *sata_set_spd*() to libata-sata.cBartlomiej Zolnierkiewicz
* move *sata_set_spd*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32842 572 40 33458 82ae drivers/ata/libata-core.o after: 32812 572 40 33428 8290 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_scr_*() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_scr_*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 35642 572 40 36254 8d9e drivers/ata/libata-core.o 16607 18 0 16625 40f1 drivers/ata/libata-eh.o after: 32846 572 40 33458 82b2 drivers/ata/libata-core.o 16243 18 0 16261 3f85 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-core.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-core.c: * move following functions to libata-sata.c: - ata_tf_to_fis() - ata_tf_from_fis() - sata_link_scr_lpm() - ata_slave_link_init() - sata_lpm_ignore_phy_events() * group above functions together in <linux/libata.h> * include libata-sata.c in the build when CONFIG_SATA_HOST=y Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36762 572 40 37374 91fe drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()Bartlomiej Zolnierkiewicz
When CONFIG_SATA_HOST=n there are no NCQ capable host drivers built so it is safe to hardwire ata_ncq_enabled() to always return zero. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37820 572 40 38432 9620 drivers/ata/libata-core.o 21040 105 576 21721 54d9 drivers/ata/libata-scsi.o 17405 18 0 17423 440f drivers/ata/libata-eh.o after: 37582 572 40 38194 9532 drivers/ata/libata-core.o 20702 105 576 21383 5387 drivers/ata/libata-scsi.o 17353 18 0 17371 43db drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: separate PATA timings code from libata-core.cBartlomiej Zolnierkiewicz
Separate PATA timings code from libata-core.c: * add PATA_TIMINGS config option and make corresponding PATA host drivers (and ATA ACPI code) select it * move following PATA timings code to libata-pata-timings.c: - ata_timing_quantize() - ata_timing_merge() - ata_timing_find_mode() - ata_timing_compute() * group above functions together in <linux/libata.h> * include libata-pata-timings.c in the build when PATA_TIMINGS config option is enabled * cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it depends on code from libata-core.c and libata-pata-timings.c while its only user is ATA ACPI) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39688 573 40 40301 9d6d drivers/ata/libata-core.o after: 37820 572 40 38432 9620 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize struct ata_force_param sizeBartlomiej Zolnierkiewicz
Optimize struct ata_force_param size by: - using u8 for cbl and spd_limit fields - using u16 for lflags field Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 573 40 41677 a2cd drivers/ata/libata-core.o after: 40654 573 40 41267 a133 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hostsBartlomiej Zolnierkiewicz
There is no point in exposing ncq_enable_prio sysfs attribute for devices on PATA and non-NCQ capable SATA hosts so: * remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[] * add ata_ncq_sdev_attrs[] * update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12libata: drop BPRINTK()Hannes Reinecke
No users, drop it. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-06Merge tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata updates from Jens Axboe: - Add a Sandisk CF card to supported pata_pcmcia list (Christian) - Move pata_arasan_cf away from legacy API (Peter) - Ensure ahci DMA/ints are shut down on shutdown (Prabhakar) * tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block: ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel() ata: ahci: Add shutdown to freeze hardware resources of ahci pata_pcmia: add SanDisk High (>8G) CF card to supported list
2020-01-29ata: ahci: Add shutdown to freeze hardware resources of ahciPrabhakar Kushwaha
device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-03compat_ioctl: scsi: handle HDIO commands from driversArnd Bergmann
The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands for SCSI devices, it is used by all libata drivers as well as a few drivers that support SAS attached SATA drives. The only command that is not safe for compat ioctls here is HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall() in order to do both cases correctly, and change all callers to use it as both native and compat callback pointers, including the indirect callers through sas_ioctl and ata_scsi_ioctl. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-12-25libata: Fix retrieving of active qcsSascha Hauer
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40368 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c403683 ("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Add missing export of ata_qc_get_active(), as per Pali. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-01ata: make qc_prep return ata_completion_errorsJiri Slaby
In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-01ata: define AC_ERR_OKJiri Slaby
Since we will return enum ata_completion_errors from qc_prep in the next patch, let's define AC_ERR_OK to mark the OK status. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-08scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_templateNathan Chancellor
Clang warns several times in the scsi subsystem (trimmed for brevity): drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to switch condition type (2147762695 to 18446744071562347015) [-Wswitch] case CCISS_GETBUSTYPES: ^ drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to switch condition type (2147762694 to 18446744071562347014) [-Wswitch] case CCISS_GETHEARTBEAT: ^ The root cause is that the _IOC macro can generate really large numbers, which don't fit into type 'int', which is used for the cmd parameter in the ioctls in scsi_host_template. My research into how GCC and Clang are handling this at a low level didn't prove fruitful. However, looking at the rest of the kernel tree, all ioctls use an 'unsigned int' for the cmd parameter, which will fit all of the _IOC values in the scsi/ata subsystems. Make that change because none of the ioctls expect a negative value for any command, it brings the ioctls inline with the reset of the kernel, and it removes ambiguity, which is never good when dealing with compilers. Link: https://github.com/ClangBuiltLinux/linux/issues/85 Link: https://github.com/ClangBuiltLinux/linux/issues/154 Link: https://github.com/ClangBuiltLinux/linux/issues/157 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Bradley Grove <bgrove@attotech.com> Acked-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18scsi: flip the default on use_clusteringChristoph Hellwig
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-24Merge branch 'for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting. Mostly ahci and ahci_platform changes, many around power management" * 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ata: ahci_platform: enable to get and control reset ata: libahci_platform: add reset control support ata: add an extra argument to ahci_platform_get_resources() ata: sata_rcar: Add r8a77965 support ata: sata_rcar: exclude setting of PHY registers in Gen3 ata: sata_rcar: really mask all interrupts on Gen2 and later Revert "ata: ahci_platform: allow disabling of hotplug to save power" ata: libahci: Allow reconfigure of DEVSLP register ata: libahci: Correct setting of DEVSLP register ata: ahci: Enable DEVSLP by default on x86 with SLP_S0 ata: ahci: Support state with min power but Partial low power state Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc" ata: sata_rcar: Add rudimentary Runtime PM support ata: sata_rcar: Provide a short-hand for &pdev->dev ata: Only output sg element mapped number in verbose debug ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG ata: ahci_platform: convert kcalloc to devm_kcalloc ata: ahci_platform: convert kzallloc to kcalloc ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown libata: remove ata_sff_data_xfer_noirq() ...
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-07-30ata: ahci: Support state with min power but Partial low power stateSrinivas Pandruvada
Currently when min_power policy is selected, the partial low power state is not entered and link will try aggressively enter to only slumber state. Add a new policy which still enable DEVSLP but also try to enter partial low power state. This policy is presented as "min_power_with_partial". For information the difference between partial and slumber Partial – PHY logic is powered up, and in a reduced power state. The link PM exit latency to active state maximum is 10 ns. Slumber – PHY logic is powered up, and in a reduced power state. The link PM exit latency to active state maximum is 10 ms. Devslp – PHY logic is powered down. The link PM exit latency from this state to active state maximum is 20 ms, unless otherwise specified by DETO. Suggested-and-reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-11libata: remove ata_sff_data_xfer_noirq()Sebastian Andrzej Siewior
ata_sff_data_xfer_noirq() is invoked via the ->sff_data_xfer hook. The latter is invoked by ata_pio_sector(), atapi_send_cdb() and __atapi_pio_bytes() which in turn is invoked by ata_sff_hsm_move(). The latter function requires that the "ap->lock" lock is held which needs to be taken with disabled interrupts. There is no need have to have ata_sff_data_xfer_noirq() which invokes ata_sff_data_xfer32() with disabled interrupts because at this point the interrupts are already disabled. Remove the function and its references to it and replace all callers with ata_sff_data_xfer32(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOSHans de Goede
There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-06-19scsi: libsas: dynamically allocate and free ata hostJason Yan
Commit 2623c7a5f2 ("libata: add refcounting to ata_host") v4.17+ introduced refcounting to ata_host and will increase or decrease the refcount when adding or deleting transport ATA port. Now the ata host for libsas is embedded in domain_device, and the ->kref member is not initialized. Afer we add ata transport class, ata_host_get() will be called when adding transport ATA port and a warning will be triggered as below: refcount_t: increment on 0; use-after-free. WARNING: CPU: 2 PID: 103 at lib/refcount.c:153 refcount_inc+0x40/0x48 ...... Call trace: refcount_inc+0x40/0x48 ata_host_get+0x10/0x18 ata_tport_add+0x40/0x120 ata_sas_tport_add+0xc/0x14 sas_ata_init+0x7c/0xc8 sas_discover_domain+0x380/0x53c process_one_work+0x12c/0x288 worker_thread+0x58/0x3f0 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 And also when removing transport ATA port ata_host_put() will be called and another similar warning will be triggered. If the refcount decreased to zero, the ata host will be freed. But this ata host is only part of domain_device, it cannot be freed directly. So we have to change this embedded static ata host to a dynamically allocated ata host and initialize the ->kref member. To use ata_host_get() and ata_host_put() in libsas, we need to move the declaration of these functions to the public libata.h and export them. Fixes: b6240a4df018 ("scsi: libsas: add transport class for ATA devices") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Taras Kondratiuk <takondra@cisco.com> CC: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2024-05-10 10:19:14 +0000