summaryrefslogtreecommitdiff
path: root/include/linux/mhi.h
AgeCommit message (Collapse)Author
2021-12-09bus: mhi: core: Add support for forced PM resumeLoic Poulain
For whatever reason, some devices like QCA6390, WCN6855 using ath11k are not in M3 state during PM resume, but still functional. The mhi_pm_resume should then not fail in those cases, and let the higher level device specific stack continue resuming process. Add an API mhi_pm_resume_force(), to force resuming irrespective of the current MHI state. This fixes a regression with non functional ath11k WiFi after suspend/resume cycle on some machines. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179 Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/ Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state") Cc: stable@vger.kernel.org #5.13 Reported-by: Kalle Valo <kvalo@codeaurora.org> Reported-by: Pengyu Ma <mapengyu@gmail.com> Tested-by: Kalle Valo <kvalo@kernel.org> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [mani: Switched to API, added bug report, reported-by tags and CCed stable] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-01Merge tag 'char-misc-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...
2021-08-27Revert "bus: mhi: Add inbound buffers allocation flag"Greg Kroah-Hartman
This reverts commit 0092a1e3f7636ff4e202a41b0320690699247e22 This should be reverted in the char-misc-next branch to make merging with Linus's branch possible due to issues with the mhi code that was found in the networking tree. Link: https://lore.kernel.org/r/20210827175852.GB15018@thinkpad Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bhaumik Bhatt <bbhatt@codeaurora.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26Revert "net: really fix the build..."Kalle Valo
This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88. Wren and Nicolas reported that ath11k was failing to initialise QCA6390 Wi-Fi 6 device with error: qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22 Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in v5.14-rc5, caused this regression in qrtr. Most likely all ath11k devices are broken, but I only tested QCA6390. Let's revert the broken commit so that ath11k works again. Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05bus: mhi: Add MMIO region length to controller structureBhaumik Bhatt
Make controller driver specify the MMIO register region length for range checking of BHI or BHIe space. This can help validate that offsets are in acceptable memory region or not and avoid any boot-up issues due to BHI or BHIe memory accesses. Link: https://lore.kernel.org/r/1620330705-40192-4-git-send-email-bbhatt@codeaurora.org Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05bus: mhi: Add inbound buffers allocation flagLoic Poulain
Currently, the MHI controller driver defines which channels should have their inbound buffers allocated and queued. But ideally, this is something that should be decided by the MHI device driver instead, which actually deals with that buffers. Add a flag parameter to mhi_prepare_for_transfer allowing to specify if buffers have to be allocated and queued by the MHI stack. Keep auto_queue flag for now, but should be removed at some point. Link: https://lore.kernel.org/r/1624566520-20406-1-git-send-email-loic.poulain@linaro.org Tested-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210802051255.5771-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-03net: really fix the build...David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02Revert "mhi: Fix networking tree build."Jakub Kicinski
This reverts commit 40e159403896f7d55c98f858d0b20fee1d941fa4. Looks like this commit breaks the build for me. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02mhi: Fix networking tree build.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-15bus: mhi: pci-generic: configurable network interface MRURichard Laing
The MRU value used by the MHI MBIM network interface affects the throughput performance of the interface. Different modem models use different default MRU sizes based on their bandwidth capabilities. Large values generally result in higher throughput for larger packet sizes. In addition if the MRU used by the MHI device is larger than that specified in the MHI net device the data is fragmented and needs to be re-assembled which generates a (single) warning message about the fragmented packets. Setting the MRU on both ends avoids the extra processing to re-assemble the packets. This patch allows the documented MRU for a modem to be automatically set as the MHI net device MRU avoiding fragmentation and improving throughput performance. Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09bus: mhi: fix typo in comments for struct mhi_channel_configJarvis Jiang
The word 'rung' is a typo in below comment, fix it. * @event_ring: The event rung index that services this channel Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408100220.3853-1-jarvis.w.jiang@gmail.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: Improve documentation on channel transfer setup APIsBhaumik Bhatt
The mhi_prepare_for_transfer() and mhi_unprepare_from_transfer() APIs could use better explanation. Add details on what MHI does when these APIs are used. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-10-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Remove pre_init flag used for power purposesBhaumik Bhatt
Some controllers can choose to skip preparation for power up. In that case, device context is initialized based on the pre_init flag not being set during mhi_prepare_for_power_up(). There is no reason MHI host driver should maintain and provide controllers with two separate paths for preparing MHI. Going forward, all controllers will be required to call the mhi_prepare_for_power_up() API followed by their choice of sync or async power up. This allows MHI host driver to get rid of the pre_init flag and sets up a common way for all controllers to use MHI. This also helps controllers fail early on during preparation phase in some failure cases. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617313309-24035-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-31bus: mhi: core: Add support for Flash Programmer execution environmentCarl Yin
MHI WWAN modems support downloading firmware to NAND or eMMC using Firehose protocol with process as follows: 1. Modem boots up, enters AMSS execution environment and the device later enters EDL (Emergency Download) mode through any mechanism host can use such as a diag command. 2. Modem enters SYS_ERROR, MHI host handles SYS_ERROR transition. 3. EDL image for device to enter 'Flash Programmer' execution environment is then flashed via BHI interface from host. 4. Modem enters MHI READY -> M0 and sends the Flash Programmer execution environment change to host. 5. Following that, EDL/FIREHOSE channels (34, 35) are made available from the host. 6. User space tool for downloading firmware image to modem over the EDL channels using Firehose protocol. Link to USB flashing tool: https://git.linaro.org/landing-teams/working/qualcomm/qdl.git/ Make the necessary changes to allow for this sequence to occur and allow using the Flash Programmer execution environment. Signed-off-by: Carl Yin <carl.yin@quectel.com> Co-developed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617067704-28850-5-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-03-10bus: mhi: Make firmware image optional for controllerBhaumik Bhatt
Some controllers can opt to not have MHI download a firmware image to have the device bootup and can find the device in a pass through execution environment, ready to go. Thus, MHI controllers for those devices do not need fw_image defined. Make it optional to accommodate different bootup modes. Suggested-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1615315595-37750-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-27Merge branch 'mhi-net-immutable' into mhi-nextManivannan Sadhasivam
2021-01-27bus: mhi: core: Add helper API to return number of free TREsHemant Kumar
Introduce mhi_get_free_desc_count() API to return number of TREs available to queue buffer. MHI clients can use this API to know before hand if ring is full without calling queue API. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1610388462-16322-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-21Merge branch 'mhi-ath11k-immutable' into mhi-nextManivannan Sadhasivam
2021-01-21mhi: use irq_flags if controller driver configures itCarl Huang
If controller driver has specified the irq_flags, mhi uses this specified irq_flags. Otherwise, mhi uses default irq_flags. The purpose of this change is to support one MSI vector for QCA6390. MHI will use one same MSI vector too in this scenario. In case of one MSI vector, IRQ_NO_BALANCING is needed when irq handler is requested. The reason is if irq migration happens, the msi_data may change too. However, the msi_data is already programmed to QCA6390 hardware during initialization phase. This msi_data inconsistence will result in crash in kernel. Another issue is in case of one MSI vector, IRQF_NO_SUSPEND will trigger WARNINGS because QCA6390 wants to disable the IRQ during the suspend. To avoid above two issues, QCA6390 driver specifies the irq_flags in case of one MSI vector when mhi_register_controller is called. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-21mhi: unconstify mhi_event_configLoic Poulain
Some parameters may have to be determined at runtime. It is the case for the event ring MSI vector. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04bus: mhi: core: Add device hardware reset supportLoic Poulain
The MHI specification allows to perform a hard reset of the device when writing to the SOC_RESET register. It can be used to completely restart the device (e.g. in case of unrecoverable MHI error). This is up to the MHI controller driver to determine when this hard reset should be used, and in case of MHI errors, should be used as a reset of last resort (after standard MHI stack reset). This function is a stateless function, the MHI layer do nothing except triggering the reset by writing into the right register(s), this is up to the caller to ensure right mhi_controller state (e.g. unregister the controller if necessary). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-12-15Merge tag 'char-misc-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
2020-12-04Merge tag 'wireless-drivers-next-2020-12-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 First set of patches for v5.11. rtw88 getting improvements to work better with Bluetooth and other driver also getting some new features. mhi-ath11k-immutable branch was pulled from mhi tree to avoid conflicts with mhi tree. Major changes: rtw88 * major bluetooth co-existance improvements wilc1000 * Wi-Fi Multimedia (WMM) support ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly * tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits) wl1251: remove trailing semicolon in macro definition airo: remove trailing semicolon in macro definition wilc1000: added queue support for WMM wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt() wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path wilc1000: added 'ndo_set_mac_address' callback support brcmfmac: expose firmware config files through modinfo wlcore: Switch to using the new API kobj_to_dev() rtw88: coex: add feature to enhance HID coexistence performance rtw88: coex: upgrade coexistence A2DP mechanism rtw88: coex: add action for coexistence in hardware initial rtw88: coex: add function to avoid cck lock rtw88: coex: change the coexistence mechanism for WLAN connected rtw88: coex: change the coexistence mechanism for HID rtw88: coex: update AFH information while in free-run mode rtw88: coex: update the mechanism for A2DP + PAN rtw88: coex: add debug message rtw88: coex: run coexistence when WLAN entering/leaving LPS Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices" ... ==================== Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28bus: mhi: core: Indexed MHI controller nameLoic Poulain
Today the MHI controller name is simply cloned from the underlying bus device (its parent), that gives the following device structure for e.g. a MHI/PCI controller: devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:02:00.0 devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:02:00.0/0000:02:00.0_IPCR ... That's quite misleading/confusing and can cause device registering issues because of duplicate dev name (e.g. if a PCI device register two different MHI instances). This patch changes MHI core to create indexed mhi controller names (mhi0, mhi1...) in the same way as other busses (i2c0, usb0...). The previous example becomes: devices/pci0000:00/0000:00:01.2/0000:02:00.0/mhi0 devices/pci0000:00/0000:00:01.2/0000:02:00.0/mhi0/mhi0_IPCR ... v2: move index field at the end of mhi_controller struct (before bool) to avoid breaking well packed alignment. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-11-20Merge branch 'mhi-ath11k-immutable' into mhi-nextManivannan Sadhasivam
2020-11-18bus: mhi: core: Move to using high priority workqueueBhaumik Bhatt
MHI work is currently scheduled on the global/system workqueue and can encounter delays on a stressed system. To avoid those unforeseen delays which can hamper bootup or shutdown times, use a dedicated high priority workqueue instead of the global/system workqueue. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-11-18bus: mhi: core: Rename RDDM download function to use proper wordsBhaumik Bhatt
mhi_download_rddm_img() uses a shorter version of the word image. Expand it and rename the function to mhi_download_rddm_image(). Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-11-18bus: mhi: core: Expose mhi_get_exec_env() API for controllersBhaumik Bhatt
The mhi_get_exec_env() APIs can be used by the controller drivers to query the execution environment of the MHI device. Expose it so it can be used in some scenarios to determine behavior of controllers. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-11-18bus: mhi: Remove auto-start optionLoic Poulain
There is really no point having an auto-start for channels. This is confusing for the device drivers, some have to enable the channels, others don't have... and waste resources (e.g. pre allocated buffers) that may never be used. This is really up to the MHI device(channel) driver to manage the state of its channels. While at it, let's also remove the auto-start option from ath11k mhi controller. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: clubbed ath11k change] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-11-05bus: mhi: Add mhi_queue_is_full functionLoic Poulain
This function can be used by client driver to determine whether it's possible to queue new elements in a channel ring. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1604424234-24446-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-02bus: mhi: Remove unused nr_irqs_req variableLoic Poulain
nr_irqs_req is unused in MHI stack. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-18-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce debugfs entries for MHIBhaumik Bhatt
Introduce debugfs entries to show state, register, channel, device, and event rings information. Allow the host to dump registers, issue device wake, and change the MHI timeout to help in debug. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-15-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: Remove include of rwlock_types.hClark Williams
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. Including it directly will break the RT build. Also there is no point in including _types.h headers directly. There is no benefit in including the type without the accessor. Fixes: 0cbf260820fa7 ("bus: mhi: core: Add support for registering MHI controllers") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Clark Williams <williams@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-13-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Add const qualifier to MHI config informationHemant Kumar
MHI channel, event and controller config data needs to be treated read only information. Add const qualifier to make sure config information passed by MHI controller is not modified by MHI core driver. Suggested-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-12-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce APIs to allocate and free the MHI controllerBhaumik Bhatt
Client devices should use the APIs provided to allocate and free the MHI controller structure. This will help ensure that the structure is zero-initialized and there are no false positives with respect to reading any values such as the serial number or the OEM PK hash. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Read and save device hardware information from BHIBhaumik Bhatt
Device hardware specific information such as serial number and the OEM PK hash can be read using BHI and saved on host to identify the endpoint. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Introduce counters to track MHI device state transitionsBhaumik Bhatt
Use counters to track MHI device state transitions such as those to M0, M2, or M3 states. This can help in better debug, allowing the user to see the number of transitions to a certain MHI state when queried using debugfs entries or via other mechanisms. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-9-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: core: Use generic name field for an MHI deviceBhaumik Bhatt
An MHI device is not necessarily associated with only channels as we can have one associated with the controller itself. Hence, the chan_name field within the mhi_device structure should instead be replaced with a generic name to accurately reflect any type of MHI device. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus: mhi: fix doubled words and struct image_info kernel-docRandy Dunlap
Drop doubled word "table" in kernel-doc. Fix syntax for the kernel-doc notation for struct image_info. Note that the bhi_vec field is private and not part of the kernel-doc. Drop doubled word "device" in a comment. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: Added bus: prefix to the commit subject] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200929175218.8178-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Remove the system error worker threadHemant Kumar
Remove the system error worker thread and instead have the execution environment worker handle that transition to serialize processing and avoid any possible race conditions during shutdown. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-10-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22bus: mhi: core: Handle firmware load using state workerBhaumik Bhatt
Upon power up, driver queues firmware worker thread if the execution environment is PBL. Firmware worker is blocked with a timeout until state worker gets a chance to run and unblock firmware worker. An endpoint power up failure can be seen if state worker gets a chance to run after firmware worker has timed out. Remove this dependency and handle firmware load directly using state worker thread. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200521170249.21795-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-11Merge 5.7-rc5 into char-misc-nextGreg Kroah-Hartman
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Fix typo in commentJeffrey Hugo
There is a typo - "runtimet" should be "runtime". Fix it. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Offload register accesses to the controllerJeffrey Hugo
When reading or writing MHI registers, the core assumes that the physical link is a memory mapped PCI link. This assumption may not hold for all MHI devices. The controller knows what is the physical link (ie PCI, I2C, SPI, etc), and therefore knows the proper methods to access that link. The controller can also handle link specific error scenarios, such as reading -1 when the PCI link went down. Therefore, it is appropriate that the MHI core requests the controller to make register accesses on behalf of the core, which abstracts the core from link specifics, and end up removing an unnecessary assumption. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-5-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: core: Remove link_status() callbackJeffrey Hugo
If the MHI core detects invalid data due to a PCI read, it calls into the controller via link_status() to double check that the link is infact down. All in all, this is pretty pointless, and racy. There are no good reasons for this, and only drawbacks. Its pointless because chances are, the controller is going to do the same thing to determine if the link is down - attempt a PCI access and compare the result. This does not make the link status decision any smarter. Its racy because its possible that the link was down at the time of the MHI core access, but then recovered before the controller access. In this case, the controller will indicate the link is not down, and the MHI core will precede to use a bad value as the MHI core does not attempt to retry the access. Retrying the access in the MHI core is a bad idea because again, it is racy - what if the link is down again? Furthermore, there may be some higher level state associated with the link status, that is now invalid because the link went down. The only reason why the MHI core could see "invalid" data when doing a PCI access, that is actually valid, is if the register actually contained the PCI spec defined sentinel for an invalid access. In this case, it is arguable that the MHI implementation broken, and should be fixed, not worked around. Therefore, remove the link_status() callback before anyone attempts to implement it. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05bus: mhi: Fix parsing of mhi_flagsManivannan Sadhasivam
With the current parsing of mhi_flags, the following statement always return false: eob = !!(flags & MHI_EOB); This is due to the fact that 'enum mhi_flags' starts with index 0 and we are using direct AND operation to extract each bit. Fix this by using BIT() macros for defining the flags so that the reset of the code need not be touched. Fixes: 189ff97cca53 ("bus: mhi: core: Add support for data transfer") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200430190555.32741-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28bus: mhi: core: Add support for MHI suspend and resumeManivannan Sadhasivam
Add support for MHI suspend and resume states. While at it, the mhi_notify() function needs to be exported as well. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200427075829.9304-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26bus: mhi: core: Add support for reading MHI info from deviceManivannan Sadhasivam
The MHI register base has several registers used for getting the MHI specific information such as version, family, major, and minor numbers from the device. This information can be used by the controller drivers for usecases such as applying quirks for a specific revision etc... While at it, let's also rearrange the local variables in mhi_register_controller(). Suggested-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200324061050.14845-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-05-12 16:19:03 +0000