summaryrefslogtreecommitdiff
path: root/include/linux/mlx5/port.h
AgeCommit message (Collapse)Author
2018-03-26net/mlx5e: PFC stall prevention supportInbar Karmy
Implement set/get functions to configure PFC stall prevention timeout by tunables api through ethtool. By default the stall prevention timeout is configured to 8 sec. Timeout range is: 80-8000 msec. Enabling stall prevention with the auto timeout will set the timeout to 100 msec. Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-04net/mlx5: QPTS and QPDPM register firmware command supportHuy Nguyen
The QPTS register allows changing the priority trust state between pcp and dscp. Add support to get/set trust state from device. When the port is in pcp/dscp trust state, packet is routed by hardware to matching priority based on its pcp/dscp value respectively. The QPDPM register allow channing the dscp to priority mapping. Add support to get/set dscp to priority mapping from device. Note that to change a dscp mapping, the "e" bit of this dscp structure must be set in the QPDPM firmware command. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-26net/mlx5e: DCBNL, Implement tc with ets type and zero bandwidthHuy Nguyen
Previously, tc with ets type and zero bandwidth is not accepted by driver. This behavior does not follow the IEEE802.1qaz spec. If there are tcs with ets type and zero bandwidth, these tcs are assigned to the lowest priority tc_group #0. We equally distribute 100% bw of the tc_group #0 to these zero bandwidth ets tcs. Also, the non zero bandwidth ets tcs are assigned to tc_group #1. If there is no zero bandwidth ets tc, the non zero bandwidth ets tcs are assigned to tc_group #0. Fixes: cdcf11212b22 ("net/mlx5e: Validate BW weight values of ETS") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-08net/mlx5e: Add support for reading connector type from PTYSEran Ben Elisha
Read port connector type from the firmware instead of caching it in the driver metadata. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2016-11-28net/mlx5: Add DCBX firmware commands supportHuy Nguyen
Add set/query commands for DCBX_PARAM register Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28net/mlx5e: Support DCBX CEE APIHuy Nguyen
Add DCBX CEE API interface for ConnectX-4. Configurations are stored in a temporary structure and are applied to the card's firmware when the CEE's setall callback function is called. Note: priority group in CEE is equivalent to traffic class in ConnectX-4 hardware spec. bw allocation per priority in CEE is not supported because ConnectX-4 only supports bw allocation per traffic class. user priority in CEE does not have an equivalent term in ConnectX-4. Therefore, user priority to priority mapping in CEE is not supported. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18net/mlx5: Port module event hardware structuresHuy Nguyen
Add hardware structures and constants definitions needed for module events support. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18net/mlx5: Separate query_port_proto_oper for IB and ENNoa Osherovich
Replaced mlx5_query_port_proto_oper with separate functions per link type. The functions should take different arguments so no point in trying to unite them. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Expose mlx5e_link_modeNoa Osherovich
The mlx5e_link_mode enumeration will also be used in mlx5_ib for RoCE. This patch moves the enumeration to the mlx5 driver port header file. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-06-27net/mlx5e: Report correct auto negotiation and allow togglingGal Pressman
Previous to this patch auto negotiation was reported off although it was on by default in hardware. This patch reports the correct information to ethtool and allows the user to toggle it on/off. Added another parameter to set port proto function in order to pass the auto negotiation field to the hardware. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27net/mlx5e: Toggle link only after modifying port parametersGal Pressman
Add a dedicated function to toggle port link. It should be called only after setting a port register. Toggle will set port link to down and bring it back up in case that it's admin status was up. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes in the conflicts. In the macsec case, the change of the default ID macro name overlapped with the 64-bit netlink attribute alignment fixes in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net/mlx5e: Add ethtool support for dump module EEPROMGal Pressman
Add query MCIA, PMLP registers infrastructure and commands. Add ethtool support for get_module_info() and get_module_eeprom() callbacks. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net/mlx5e: Add ethtool support for interface identify (LED blinking)Gal Pressman
Add the needed hardware command and mlx5_ifc structs for managing LED control. Add set_phys_id ethtool callback to support ethtool -p flag. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net/mlx5e: Add support for RXALL netdev featureEran Ben Elisha
Introduce new access register named Ports Check Mask Register (PCMR) to control all HW checks on port. With this register, the driver can enable/disable Hardware FCS validation. When RXALL is enabled/disabled using ndo_set_features, enable/disable fcs check at HW. User can change HW configuration using rx-all flag at ethtool. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Device's mtu field is u16 and not intSaeed Mahameed
For set/query MTU port firmware commands the MTU field is 16 bits, here I changed all the "int mtu" parameters of the functions wrapping those firmware commands to be u16. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net/mlx5e: Wake On LAN supportTariq Toukan
Implement set/get WOL by ethtool and added the needed device commands and structures to mlx5_ifc. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net/mlx5e: Implement DCBNL IEEE max rateTariq Toukan
Add support for DCBNL IEEE get/set max rate. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net/mlx5: Introduce physical port TC/prio access functionsSaeed Mahameed
Add access functions to set and query a physical port TC groups and prio parameters. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net/mlx5: Introduce physical port PFC access functionsAchiad Shochat
Add access functions to set and query a physical port PFC (Priority Flow Control) parameters. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net/mlx5: Introduce a new header file for physical port functionsAchiad Shochat
All the device physical port access functions are implemented in the port.c file. We just extract the exposure of these functions from driver.h into a dedicated header file called port.h. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-18 20:42:52 +0000