summaryrefslogtreecommitdiff
path: root/include/linux/mtd
AgeCommit message (Collapse)Author
2018-10-23Merge tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull mtd updates from Boris Brezillon: "SPI NOR core changes: - Support non-uniform erase size - Support controllers with limited TX fifo size Driver changes: - m25p80: Re-issue a WREN command after each write access - cadence: Pass a proper dir value to dma_[un]map_single() - fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B addressing opcodes are properly handled - intel-spi: Add a new PCI entry for Ice Lake Raw NAND core changes: - Two batchs of cleanups of the NAND API, including: * Deprecating a lot of interfaces (now replaced by ->exec_op()). * Moving code in separate drivers (JEDEC, ONFI), in private files (internals), in platform drivers, etc. * Functions/structures reordering. * Exclusive use of the nand_chip structure instead of the MTD one all across the subsystem. - Addition of the nand_wait_readrdy/rdy_op() helpers. Raw NAND controllers drivers changes: - Various coccinelle patches. - Marvell: * Use regmap_update_bits() for syscon access. * More documentation. * BCH failure path rework. * More layouts to be supported. * IRQ handler complete() condition fixed. - Fsl_ifc: * SRAM initialization fixed for newer controller versions. - Denali: * Fix licenses mismatch and use a SPDX tag. * Set SPARE_AREA_SKIP_BYTES register to 8 if unset. - Qualcomm: * Do not include dma-direct.h. - Docg4: * Removed. - Ams-delta: * Use of a GPIO lookup table * Internal machinery changes. Raw NAND chip drivers changes: - Toshiba: * Add support for Toshiba memory BENAND * Pass a single nand_chip object to the status helper. - ESMT: * New driver to retrieve the ECC requirements from the 5th ID byte. MTD changes: - physmap cleanups/fixe - gpio-addr-flash cleanups/fixes" * tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd: (93 commits) jffs2: free jffs2_sb_info through jffs2_kill_sb() mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash mtd: maps: gpio-addr-flash: Convert to gpiod mtd: maps: gpio-addr-flash: Replace array with an integer mtd: maps: gpio-addr-flash: Use order instead of size mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus mtd: devices: m25p80: Make sure WRITE_EN is issued before each write mtd: spi-nor: Support controllers with limited TX FIFO size mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single mtd: spi-nor: parse SFDP Sector Map Parameter Table mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories mtd: rawnand: marvell: fix the IRQ handler complete() condition mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered" mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper mtd: maps: gpio-addr-flash: Use devm_* functions mtd: maps: gpio-addr-flash: Fix ioremapped size mtd: maps: gpio-addr-flash: Replace custom printk mtd: physmap_of: Release resources on error ...
2018-10-19Merge tag 'nand/for-4.20' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
NAND core changes: - Two batchs of cleanups of the NAND API, including: * Deprecating a lot of interfaces (now replaced by ->exec_op()). * Moving code in separate drivers (JEDEC, ONFI), in private files (internals), in platform drivers, etc. * Functions/structures reordering. * Exclusive use of the nand_chip structure instead of the MTD one all across the subsystem. - Addition of the nand_wait_readrdy/rdy_op() helpers. Raw NAND controllers drivers changes: - Various coccinelle patches. - Marvell: * Use regmap_update_bits() for syscon access. * More documentation. * BCH failure path rework. * More layouts to be supported. * IRQ handler complete() condition fixed. - Fsl_ifc: * SRAM initialization fixed for newer controller versions. - Denali: * Fix licenses mismatch and use a SPDX tag. * Set SPARE_AREA_SKIP_BYTES register to 8 if unset. - Qualcomm: * Do not include dma-direct.h. - Docg4: * Removed. - Ams-delta: * Use of a GPIO lookup table * Internal machinery changes. Raw NAND chip drivers changes: - Toshiba: * Add support for Toshiba memory BENAND * Pass a single nand_chip object to the status helper. - ESMT: * New driver to retrieve the ECC requirements from the 5th ID byte.
2018-10-16mtd_blkdevs: convert to blk-mqJens Axboe
Straight forward conversion, using an internal list to enable the driver to pull requests at will. Dynamically allocate the tag set to avoid having to pull in the block headers for blktrans.h, since various mtd drivers use block conflicting names for defines and functions. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-08mtd: spi-nor: parse SFDP Sector Map Parameter TableTudor Ambarus
Add support for the SFDP (JESD216B) Sector Map Parameter Table. This table is optional, but when available, we parse it to identify the location and size of sectors within the main data array of the flash memory device and to identify which Erase Types are supported by each sector. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-08mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memoriesTudor Ambarus
Based on Cyrille Pitchen's patch https://lkml.org/lkml/2017/3/22/935. This patch is a transitional patch in introducing the support of SFDP SPI memories with non-uniform erase sizes like Spansion s25fs512s. Non-uniform erase maps will be used later when initialized based on the SFDP data. Introduce the memory erase map which splits the memory array into one or many erase regions. Each erase region supports up to 4 erase types, as defined by the JEDEC JESD216B (SFDP) specification. To be backward compatible, the erase map of uniform SPI NOR flash memories is initialized so it contains only one erase region and this erase region supports only one erase command. Hence a single size is used to erase any sector/block of the memory. Besides, since the algorithm used to erase sectors on non-uniform SPI NOR flash memories is quite expensive, when possible, the erase map is tuned to come back to the uniform case. The 'erase with the best command, move forward and repeat' approach was suggested by Cristian Birsan in a brainstorm session, so: Suggested-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-03mtd: rawnand: Allow selection of ECC byte ordering at runtimeBoris Brezillon
Currently, the selection of ECC byte ordering for software hamming is done at compilation time, which doesn't make sense when ECC byte calculation is done in hardware and byte ordering is forced by the hardware engine. In this case, only the correction is done in software and we want to force the byte-ordering no matter the value of CONFIG_MTD_NAND_ECC_SMC. This is typically the case for the FSMC (Smart Media ordering), TMIO and TXX9NDFMC (regular byte ordering) blocks. For all other use cases (pure software implementation, SM FTL and nandecctest), we keep selecting the byte ordering based on the CONFIG_MTD_NAND_ECC_SMC value. It might not be ideal for SM FTL (I'd expect Smart Media ordering to be employed by the Smart Media FTL), but this option doesn't seem to be enabled in the existing _defconfig, so I can't tell setting sm_order to true is the right choice. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move JEDEC code to nand_jedec.cBoris Brezillon
This moves JEDEC related code to nand_jedec.c and JEDEC related struct/macros to include/linux/mtd/jedec.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move ONFI code to nand_onfi.cBoris Brezillon
This moves ONFI related code to nand_onfi.c and ONFI related struct/macros to include/linux/mtd/onfi.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Keep all internal stuff privateBoris Brezillon
A lot of things defined in rawnand.h should not be exposed to NAND controller drivers and should only be shared by core files. Create the drivers/mtd/nand/raw/internals.h header to store such definitions, and move all private defs to this header. Also remove EXPORT_SYMBOLS() on functions that are not supposed to be exposed. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Inline onfi_get_async_timing_mode()Boris Brezillon
onfi_get_async_timing_mode() is only used in one place inside nand_base.c. Let's inline the code and kill the helper. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.hBoris Brezillon
platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of a few unused definitionsBoris Brezillon
Those definitions are not used, let's remove them. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of the duplicate nand_chip forward declarationBoris Brezillon
There's already a forward declaration of nand_chip at the beginning of the file. Get rid of this one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of nand_flash_dev forward declationBoris Brezillon
nand_scan[with_ids]() have been moved at the end of the file. We can now get rid of of the nand_flash_dev forward declaration. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move function prototypes after struct declarationsBoris Brezillon
Move nand_scan[_with_ids]() and nand_wait_ready() at the end of the file where all function prototype lies. This will also allow us to get rid of the nand_flash_dev forward declaration. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->chip_delayBoris Brezillon
The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{set,get}_features() hooksBoris Brezillon
Those hooks should be replaced by a proper ->exec_op() implementation. Move them to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->erase()Boris Brezillon
The ->erase() hook have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or the driver uses a specific path for the ERASE operation (denali), instead of implementing it generically. In any case, we should discourage people from overloading this method and encourage them to implement ->exec_op() instead. Move the ->erase() hook to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->block_{bad,markbad}() hooksBoris Brezillon
Those hooks have been overloaded by some drivers for bad reasons: either the driver was not fitting in the NAND framework and should have been an MTD driver (docg4), or it was not properly implementing the OOB read/write request or had a weird layout where BBM are trashed. In any case, we should discourage people from overloading those methods and encourage them to fix their driver instead. Move the ->block_{bad,markbad}() hooks to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon
All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} thereBoris Brezillon
We regularly have new NAND controller drivers that are making use of fields/hooks that we want to get rid of but can't because of all the legacy drivers that we might break if we do. So, instead of removing those fields/hooks, let's move them to a sub-struct which is clearly documented as deprecated. We start with the ->IO_ADDR_{R,W] fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Make maxchips an unsigned intBoris Brezillon
There's no good reason to make maxchips a signed integer, since only positive values are valid. Make it an unsigned int. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object nand_erase_nand()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the nand_erase_nand() helper. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to all nand_xxx_bbt() helpersBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the nand_xxx_bbt() helpers. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->setup_data_interface()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_data_interface() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->setup_read_retry()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_read_retry() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->{get, set}_features()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->{get,set}_features() hooks. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->erase()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->erase() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->waitfunc()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->waitfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmdfunc()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmdfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->dev_ready()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmd_ctrl() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->block_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->block_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->select_chip()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->select_chip() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->correct()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->correct()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->calculate()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->calculate()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->hwctl()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->hwctl()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_wait_ready()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_wait_ready()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. In order to do that, we first need to update the platform_nand_ctrl hooks to take a nand_chip object instead of an mtd_info. We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip conversion, but those will be dropped when patching nand_chip hooks to take a nand_chip object. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-04mtd: rawnand: Get rid of the ->read_word() hookBoris Brezillon
Commit c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") removed this only user of the ->read_word() method but kept the hook in place. Remove it now. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-08-11Merge tag 'spi-nor/for-4.19' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
Pull SPI NOR updates from Boris Brezillon: " Core changes: - Apply reset hacks only when reset is explicitly marked as broken in the DT Driver changes: - Minor cleanup/fixes in the m25p80 driver - Release flash_np in the nxp-spifi driver - Add suspend/resume hooks to the atmel-quadspi driver - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi driver - Use %pK instead of %p in the stm32-quadspi driver - Improve timeout handling in the cadence-quadspi driver - Use mtd_device_register() instead of mtd_device_parse_register() in the intel-spi driver "
2018-08-11Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "
generated by cgit (git 2.34.1) at 2024-06-17 13:51:40 +0000