summaryrefslogtreecommitdiff
path: root/include/linux/platform_data
AgeCommit message (Collapse)Author
2024-01-18Merge tag 'i2c-for-6.8-rc1-rebased' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Finally, quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. This is the rebased pull request where a large series for the designware driver was dropped" * tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) MAINTAINERS: use proper email for my I2C work i2c: stm32f7: add support for stm32mp25 soc i2c: stm32f7: perform I2C_ISR read once at beginning of event isr dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: simplify status messages in case of errors i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: i801: Add lis3lv02d for Dell XPS 15 7590 i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: wmt: Reduce redundant: REG_CR setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: bus busy check i2c: mux: reg: Remove class-based device auto-detection support i2c: make i2c_bus_type const dt-bindings: at24: add ROHM BR24G04 eeprom: at24: use of_match_ptr() i2c: cpm: Remove linux,i2c-index conversion from be32 i2c: imx: Make SDA actually optional for bus recovering ...
2024-01-18Merge tag 'input-for-v6.8-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Adafruit Seesaw gamepad device - Zforce touchscreen will handle standard device properties for axis swap/inversion - handling of advanced sensitivity settings in Microchip CAP11xx capacitive sensor driver - more drivers have been converted to use newer gpiod API - support for dedicated wakeup IRQs in gpio-keys dirver - support for slider gestures and OTP variants in iqs269a driver - atkbd will report keyboard version as 0xab83 in cases when GET ID command was skipped (to deal with problematic firmware on newer laptops), restoring the previous behavior - other assorted cleanups and changes * tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: atkbd - use ab83 as id when skipping the getid command Input: driver for Adafruit Seesaw Gamepad dt-bindings: input: bindings for Adafruit Seesaw Gamepad Input: da9063_onkey - avoid explicitly setting input's parent Input: da9063_onkey - avoid using OF-specific APIs Input: iqs269a - add support for OTP variants dt-bindings: input: iqs269a: Add bindings for OTP variants Input: iqs269a - add support for slider gestures dt-bindings: input: iqs269a: Add bindings for slider gestures Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages Input: zforce_ts - accept standard touchscreen properties dt-bindings: touchscreen: neonode,zforce: Use standard properties dt-bindings: touchscreen: convert neonode,zforce to json-schema dt-bindings: input: convert drv266x to json-schema Input: da9063 - use dev_err_probe() Input: da9063 - drop redundant prints in probe() Input: da9063 - simplify obtaining OF match data Input: as5011 - convert to GPIO descriptor Input: omap-keypad - drop optional GPIO support Input: tca6416-keypad - drop unused include ...
2024-01-18i2c: mux: reg: Remove class-based device auto-detection supportHeiner Kallweit
Legacy class-based device auto-detection shouldn't be used in new code. Therefore remove support in i2c-mux-reg as long as we don't have a user of this feature yet. Link: https://lore.kernel.org/linux-i2c/a22978a4-88e4-46f4-b71c-032b22321599@gmail.com/ Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-12Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Only a couple new SoCs have support added this time, primarily for Qualcomm SM8650 based on the diffstat. Otherwise this is a collection of non-critical fixes and cleanups to various clk drivers and their DT bindings. Nothing is changed in the core clk framework this time, although there's a patch to fix a basic clk type initialization function. In general, this pile looks to be on the smaller side. New Drivers: - Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650 - Mediatek MT7988 SoC clocks Updates: - Update Zynqmp driver for Versal NET platforms - Add clk driver for Versal clocking wizard IP - Support for stm32mp25 clks - Add glitch free PLL setting support to si5351 clk driver - Add DSI clocks on Amlogic g12/sm1 - Add CSI and ISP clocks on Amlogic g12/sm1 - Document bindings for i.MX93 ANATOP clock driver - Free clk_node in i.MX SCU driver for resource with different owner - Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15 - Fix the name of the fvco in i.MX pll14xx by renaming it to fout - Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC - Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S - Check reset monitor registers on Renesas RZ/G2L-alike SoCs - Reuse reset functionality in the Renesas RZ/G2L clock driver - Global and RPMh clock support for the Qualcomm X1E80100 SoC - Support for the Stromer APCS PLL found in Qualcomm IPQ5018 - Add a new type of branch clock, with support for controlling separate memory control bits, to the Qualcomm clk driver - Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and QRU1000 - Add a number of missing clocks related to CSI2 on Qualcomm MSM8939 - Add support for the camera clock controller on Qualcomm SC8280XP - Correct PLL configuration in GPU and video clock controllers for Qualcomm SM8150 - Add runtime PM support and a few missing resets to Qualcomm SM8150 video clock controller - Fix configuration of various GCC GDSCs on Qualcomm SM8550 - Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver - Fix up GPU and display clock controllers PLL configuration settings on Qualcomm SM8550 - Cleanup variable init in Allwinner nkm module - Convert various DT bindings to YAML - A few kernel-doc fixes for Samsung SoC clock controllers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits) clk: mediatek: add drivers for MT7988 SoC clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 dt-bindings: clock: mediatek: add clock controllers of MT7988 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs dt-bindings: clock: mediatek: add MT7988 clock IDs clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: clk-mux: Support custom parent indices for muxes dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx clk: starfive: Add flags argument to JH71X0__MUX macro clk: imx: pll14xx: change naming of fvco to fout clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu() clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config clk: qcom: dispcc-sm8550: Use the correct PLL configuration function clk: qcom: dispcc-sm8550: Update disp PLL settings clk: qcom: gpucc-sm8550: Update GPU PLL settings ...
2024-01-11Merge tag 'net-next-6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
2023-12-17clk: si5351: allow PLLs to be adjusted without resetAlvin Šipraga
Introduce a new PLL reset mode flag which controls whether or not to reset a PLL after adjusting its rate. The mode can be configured through platform data or device tree. Since commit 6dc669a22c77 ("clk: si5351: Add PLL soft reset"), the driver unconditionally resets a PLL whenever its rate is adjusted. The rationale was that a PLL reset was required to get three outputs working at the same time. Before this change, the driver never reset the PLLs. Commit b26ff127c52c ("clk: si5351: Apply PLL soft reset before enabling the outputs") subsequently introduced an option to reset the PLL when enabling a clock output that sourced it. Here, the rationale was that this is required to get a deterministic phase relationship between multiple output clocks. This clearly shows that it is useful to reset the PLLs in applications where multiple clock outputs are used. However, the Si5351 also allows for glitch-free rate adjustment of its PLLs if one avoids resetting the PLL. In our audio application where a single Si5351 clock output is used to supply a runtime adjustable bit clock, this unconditional PLL reset behaviour introduces unwanted glitches in the clock output. It would appear that the problem being solved in the former commit may be solved by using the optional device tree property introduced in the latter commit, obviating the need for an unconditional PLL reset after rate adjustment. But it's not OK to break the default behaviour of the driver, and it cannot be assumed that all device trees are using the property introduced in the latter commit. Hence, the new behaviour is made opt-in. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Jacob Siverskog <jacob@teenage.engineering> Cc: Sergej Sawazki <sergej@taudac.com> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-3-69b82311cb90@bang-olufsen.dk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-12-13Input: omap-keypad - drop optional GPIO supportLinus Walleij
The driver supports passing some GPIO lines for rows and columns through the driver data, but there is no in-kernel user of this. Further the use seems convoluted because the GPIO lines are unused in the driver, then explicitly free:ed when removing it without being requested when probing it, which is assymetric and just a recepie for disaster. Remove the support for these unused GPIOs, if need be support can be reestablished in an organized fashion using GPIO descriptors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231129-descriptors-input-v1-3-9433162914a3@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-11Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-nextHans de Goede
Back merge pdx86 fixes into pdx86/for-next for further WMI work depending on some of the fixes. platform-drivers-x86 for v6.7-3 Highlights: - asus-wmi: Solve i8042 filter resource handling, input, and suspend issues - wmi: Skip zero instance WMI blocks to avoid issues with some laptops - mlxbf-bootctl: Differentiate dev/production keys - platform/surface: Correct serdev related return value to avoid leaking errno into userspace - Error checking fixes The following is an automated shortlog grouped by driver: asus-wmi: - Change q500a_i8042_filter() into a generic i8042-filter - disable USB0 hub on ROG Ally before suspend - Filter Volume key presses if also reported via atkbd - Move i8042 filter install to shared asus-wmi code mellanox: - Add null pointer checks for devm_kasprintf() - Check devm_hwmon_device_register_with_groups() return value mlxbf-bootctl: - correctly identify secure boot with development keys surface: aggregator: - fix recv_buf() return value wmi: - Skip blocks with zero instances
2023-12-11clk: x86: lpss-atom: Drop unneeded 'extern' in the headerAndy Shevchenko
'extern' for the functions is not needed, drop it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20231208165238.3309058-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h 37e4b8df27bc ("net: stmmac: fix FPE events losing") c3f3b97238f6 ("net: stmmac: Refactor EST implementation") https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/ Adjacent changes: net/ipv4/tcp_ao.c 9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk") 7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-07net: dsa: microchip: move ksz_chip_id enum to platform includeDaniel Danzberger
With the ksz_chip_id enums moved to the platform include file for ksz switches, platform code that instantiates a device can now use these to set ksz_platform_data::chip_id. Signed-off-by: Daniel Danzberger <dd@embedd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-07net: dsa: microchip: properly support platform_data probingVladimir Oltean
The ksz driver has bits and pieces of platform_data probing support, but it doesn't work. The conventional thing to do is to have an encapsulating structure for struct dsa_chip_data that gets put into dev->platform_data. This driver expects a struct ksz_platform_data, but that doesn't contain a struct dsa_chip_data as first element, which will obviously not work with dsa_switch_probe() -> dsa_switch_parse(). Pointing dev->platform_data to a struct dsa_chip_data directly is in principle possible, but that doesn't work either. The driver has ksz_switch_detect() to read the device ID from hardware, followed by ksz_check_device_id() to compare it against a predetermined expected value. This protects against early errors in the SPI/I2C communication. With platform_data, the mechanism in ksz_check_device_id() doesn't work and even leads to NULL pointer dereferences, since of_device_get_match_data() doesn't work in that probe path. So obviously, the platform_data support is actually missing, and the existing handling of struct ksz_platform_data is bogus. Complete the support by adding a struct dsa_chip_data as first element, and fixing up ksz_check_device_id() to pick up the platform_data instead of the unavailable of_device_get_match_data(). The early dev->chip_id assignment from ksz_switch_register() is also bogus, because ksz_switch_detect() sets it to an initial value. So remove it. Also, ksz_platform_data :: enabled_ports isn't used anywhere, delete it. Link: https://lore.kernel.org/netdev/20231204154315.3906267-1-dd@embedd.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Daniel Danzberger <dd@embedd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-28platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspendLuke D. Jones
ASUS have worked around an issue in XInput where it doesn't support USB selective suspend, which causes suspend issues in Windows. They worked around this by adjusting the MCU firmware to disable the USB0 hub when the screen is switched off during the Microsoft DSM suspend path in ACPI. The issue we have with this however is one of timing - the call the tells the MCU to this isn't able to complete before suspend is done so we call this in a prepare() and add a small msleep() to ensure it is done. This must be done before the screen is switched off to prevent a variety of possible races. Further to this the MCU powersave option must also be disabled as it can cause a number of issues such as: - unreliable resume connection of N-Key - complete loss of N-Key if the power is plugged in while suspended Disabling the powersave option prevents this. Without this the MCU is unable to initialise itself correctly on resume. Signed-off-by: "Luke D. Jones" <luke@ljones.dev> Tested-by: Philip Mueller <philm@manjaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231126230521.125708-2-luke@ljones.dev Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-11-07Merge tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm updates from Dave Airlie: "Geert pointed out I missed the renesas reworks in my main pull, so this pull contains the renesas next work for atomic conversion and DT support. It also contains a bunch of amdgpu and some small ssd13xx fixes. renesas: - atomic conversion - DT support ssd13xx: - dt binding fix for ssd132x - Initialize ssd130x crtc_state to NULL. amdgpu: - Fix RAS support check - RAS fixes - MES fixes - SMU13 fixes - Contiguous memory allocation fix - BACO fixes - GPU reset fixes - Min power limit fixes - GFX11 fixes - USB4/TB hotplug fixes - ARM regression fix - GFX9.4.3 fixes - KASAN/KCSAN stack size check fixes - SR-IOV fixes - SMU14 fixes - PSP13 fixes - Display blend fixes - Flexible array size fixes amdkfd: - GPUVM fix radeon: - Flexible array size fixes" * tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits) drm/amd/display: Enable fast update on blendTF change drm/amd/display: Fix blend LUT programming drm/amd/display: Program plane color setting correctly drm/amdgpu: Query and report boot status drm/amdgpu: Add psp v13 function to query boot status drm/amd/swsmu: remove fw version check in sw_init. drm/amd/swsmu: update smu v14_0_0 driver if and metrics table drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks drm/amdgpu: Optimize the asic type fix code drm/amdgpu: fix GRBM read timeout when do mes_self_test drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs drm/amdgpu: Attach eviction fence on alloc drm/amdkfd: Improve amdgpu_vm_handle_moved drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2 drm/amd/display: Avoid NULL dereference of timing generator drm/amdkfd: Update cache info for GFX 9.4.3 drm/amdkfd: Populate cache info for GFX 9.4.3 drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64 drm/amdgpu/smu13: drop compute workload workaround ...
2023-11-06Merge tag 'media/v6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - the old V4L2 core videobuf kAPI was finally removed. All media drivers should now be using VB2 kAPI - new automotive driver: mgb4 - new platform video driver: npcm-video - new sensor driver: mt9m114 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge TI-specific parts - ir-rx51 was removed and the N900 DT binding was moved to the pwm-ir-tx generic driver - drop atomisp-specific ov5693, using the upstream driver instead - the camss driver has gained RDI3 support for VFE 17x - the atomisp driver now detects ISP2400 or ISP2401 at run time. No need to set it up at build time anymore - lots of driver fixes, cleanups and improvements * tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits) media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM media: venus: Fix firmware path for resources media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by media: venus: hfi_parser: Add check to keep the number of codecs within range media: venus: hfi: add checks to handle capabilities from firmware media: venus: hfi: fix the check to handle session buffer requirement media: venus: hfi: add checks to perform sanity on queue pointers media: platform: cadence: select MIPI_DPHY dependency media: MAINTAINERS: Fix path for J721E CSI2RX bindings media: cec: meson: always include meson sub-directory in Makefile media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr() media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config() media: mediatek: vcodec: using encoder device to alloc/free encoder memory media: imx-jpeg: notify source chagne event when the first picture parsed media: cx231xx: Use EP5_BUF_SIZE macro media: siano: Drop unnecessary error check for debugfs_create_dir/file() media: mediatek: vcodec: Handle invalid encoder vsi media: aspeed: Drop unnecessary error check for debugfs_create_file() Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED Documentation: media: gen-errors.rst: fix confusing ENOTTY description ...
2023-11-02Merge tag 'sound-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Most of changes at this time are for ASoC, spread over ASoC core and drivers due to the API prefix standardization. Other than that, there have little change wrt API, rather lots of driver-specific updates and fixes. Some highlight below: ASoC: - Standardization of API prefix - GPIO API usage improvements - Support for HDA patches - Lots of work on SOF, including crash dump support - Fixes for noise when stopping some Sounwire CODECs - Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc AT87390 and AW88399, many Intel platforms, many Mediatek platforms, Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas Instruments TAS575x HD-audio and USB-audio: - Deferred probe support of audio component binding - More fixes and enhancements for Cirrus subcodecs - USB Scarlett2 mixer and McIntosh DSD quirk Others: - More enhancement of snd-aloop driver - Update MAINTAINERS entry for linux-sound mailing list" * tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits) ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp() ALSA: hda: cs35l41: mark cs35l41_verify_id() static ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag ASoC: soc-dai: add flag to mute and unmute stream during trigger ASoC: ams-delta.c: use component after check ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63 ASoC: codecs: aw88399: fix typo in Kconfig select ASoC: amd: acp: add ACPI dependency ASoC: Intel: avs: Add rt5514 machine board ASoC: Intel: avs: Add rt5514 machine board ALSA: scarlett2: Add missing check with firmware version control ALSA: virtio: use ack callback ALSA: scarlett2: Remap Level Meter values ALSA: scarlett2: Allow passing any output to line_out_remap() ALSA: scarlett2: Add support for reading firmware version ALSA: scarlett2: Rename Gen 3 config sets ALSA: scarlett2: Rename scarlett_gen2 to scarlett2 ASoC: cs35l41: Detect CSPL errors when sending CSPL commands ALSA: hda: cs35l41: Check CSPL state after loading firmware ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend ...
2023-10-31Merge tag 'platform-drivers-x86-v6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - asus-wmi: Support for screenpad and solve brightness key press duplication - int3472: Eliminate the last use of deprecated GPIO functions - mlxbf-pmc: New HW support - msi-ec: Support new EC configurations - thinkpad_acpi: Support reading aux MAC address during passthrough - wmi: Fixes & improvements - x86-android-tablets: Detection fix and avoid use of GPIO private APIs - Debug & metrics interface improvements - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: inspur-platform-profile: Add platform profile support platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e platform/x86: wmi: Decouple WMI device removal from wmi_block_list platform/x86: wmi: Fix opening of char device platform/x86: wmi: Fix probe failure when failing to register WMI devices platform/x86: wmi: Fix refcounting of WMI devices in legacy functions platform/x86: wmi: Decouple probe deferring from wmi_block_list platform/x86/amd/hsmp: Fix iomem handling platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy tools/power/x86/intel-speed-select: v1.18 release tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0 tools/power/x86/intel-speed-select: Increase max CPUs in one request tools/power/x86/intel-speed-select: Display error for core-power support tools/power/x86/intel-speed-select: No TRL for non compute domains tools/power/x86/intel-speed-select: turbo-mode enable disable swapped tools/power/x86/intel-speed-select: Update help for TRL tools/power/x86/intel-speed-select: Sanitize integer arguments platform/x86: acer-wmi: Remove void function return platform/x86/amd/pmc: Add dump_custom_stb module parameter ...
2023-10-31Merge tag 'tag-chrome-platform-for-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "Improvements: - Annotate flexible array members with __counted_by - Convert platform drivers' .remove callbacks to return void Fixes: - Avoid MKBP event timeouts by disabling/enabling IRQ later/earlier Misc: - Minor cleanups and fixes" * tag 'tag-chrome-platform-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (21 commits) platform/chrome: cros_ec_lpc: Separate host command and irq disable platform/chrome: kunit: make EC protocol tests independent platform/chrome: kunit: initialize lock for fake ec_dev platform/chrome: cros_ec: fix compilation warning platform/chrome: cros_ec_proto: Mark outdata as const platform/chrome: cros_typec_vdm: Mark port_amode_ops const platform/chrome: cros_ec_typec: Use dev_err_probe() more platform/chrome: cros_ec_typec: Use semi-colons instead of commas platform/chrome/wilco_ec: telemetry: Convert to platform remove callback returning void platform/chrome/wilco_ec: debugfs: Convert to platform remove callback returning void platform/chrome/wilco_ec: core: Convert to platform remove callback returning void platform/chrome: cros_usbpd_notify: Convert to platform remove callback returning void platform/chrome: cros_usbpd_logger: Convert to platform remove callback returning void platform/chrome: cros_typec_switch: Convert to platform remove callback returning void platform/chrome: cros_ec_vbc: Convert to platform remove callback returning void platform/chrome: cros_ec_sysfs: Convert to platform remove callback returning void platform/chrome: cros_ec_lpc: Convert to platform remove callback returning void platform/chrome: cros_ec_lightbar: Convert to platform remove callback returning void platform/chrome: cros_ec_debugfs: Convert to platform remove callback returning void platform/chrome: cros_ec_chardev: Convert to platform remove callback returning void ...
2023-10-31Merge tag 'gpio-updates-for-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We don't have any new drivers. The loongson driver is getting extended with support for new models. There's a big refactor of gpio-pca953x and many small improvements to others. The GPIO code in the kernel has acquired a lot of cruft over the years as well as many abusers of the API across the kernel tree. This release cycle we have started a major cleanup and improvement effort that will most likely span several releases. We have started by converting external users of struct gpio_chip to accessing the wrapper around it - struct gpio_device. This is because the latter is reference counted while the former is removed when the provider is unbound. We also removed several instances of drivers accessing private GPIOLIB structures and including the private header from drivers/gpio/. To that end you'll see several commits aimed at different subsystems (acked by relevant maintainers) as well as two merges from the x86/platform tree. We'll then rework the locking in GPIOLIB which currently uses a big spinlock for many different things and could use becoming more fine-grained, especially as it doesn't even get the locking right. We'll also use SRCU for protecting the gpio_chip pointer against in-kernel hot-unplug crashes similar to what we saw triggered from user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB is still vulnerable to these use-cases. I'm just mentioning the plans here, this is not part of this PR. You'll see some new instances of using __free(). We've added a gpio_device_put cleanup helper similar to the put_device one introduced by Peter Zijlstra and used it according to the preferred pattern except where it didn't make sense. GPIOLIB core: - provide interfaces allowing users to retrieve, manage and query the reference counted GPIO device instead of accessing the private gpio_chip structure - replace gpiochip_find() with gpio_device_find() - remove unused acpi_get_and_request_gpiod() - improve the ignore_interrupt functionality in GPIO ACPI - correct notifier return codes in gpiolib-of - unexport gpiod_set_transitory() as it's unused outside of core GPIO code - while there are still external users accessing struct gpio_chip, let's make gpiochip_get_desc() public so that they at least use the preferred helper - improve locking for lookup tables - annotate struct linereq with __counted_by - improve GPIOLIB docs - add an OF quirk for LED trigger sources Driver improvements: - convert all GPIO drivers with .remove() callbacks to using the new variant returning void instead of int - stop accessing the GPIOLIB private structures in gpio-mockup, i2c-mux-gpio, hte-tegra194, gpio-sim - use the recommended pattern for autofree variables in gpio-sim - add support for more models to gpio-loongson - use a notifier chain to notify other blocks about interrupts in gpio-eic-sprd instead of looking up GPIO devices on every interrupt - convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap cache - don't include GPIOLIB internal headers in drivers which don't need them - move the ingenic NAND quirk into gpiolib-of - add an ignore interrupt quirk for Peaq C1010 - drop static GPIO base from gpio-omap, gpio-f7188x - use the preferred device_get_match_data() function in drivers that still don't - refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(), use cleanup helpers, use dev_err_probe() where it makes sense, fully convert to using devres and some other minor tweaks DT bindings: - add support for a new model to gpio-vf610 and update existing properties - add support for more loongson models - add missing support for imx models that are used but undocumented - convert bindings for Intel IXP4xx to schema Minor stuff: - deprecate gpio-mockup in favor of gpio-sim - include missing headers here and there - stop using gpiochip_find() in OMAP1 board files - minor tweaks in gpio-vf610, gpio-hisi - remove unneeded 'extern' specifiers from headers" * tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits) hte: tegra194: add GPIOLIB dependency hte: tegra194: don't access struct gpio_chip gpiolib: provide gpio_device_get_base() i2c: mux: gpio: don't fiddle with GPIOLIB internals gpiolib: provide gpiod_to_gpio_device() gpiolib: provide gpio_device_to_device() gpio: hisi: Fix format specifier gpiolib: provide gpio_device_find_by_fwnode() gpio: acpi: remove acpi_get_and_request_gpiod() gpio: Use device_get_match_data() gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles platform/x86: int3472: Switch to devm_get_gpiod() platform/x86: int3472: Stop using gpiod_toggle_active_low() platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper gpio: vf610: simplify code by dropping data check gpio: vf610: add i.MX8ULP of_device_id entry dt-bindings: gpio: vf610: add i.MX95 compatible dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93 dt-bindings: gpio: vf610: update gpio-ranges ...
2023-10-16drm: renesas: shmobile: Use media bus formats in platform dataGeert Uytterhoeven
Replace the custom shmob_drm_interface enumeration values with standard media bus formats. This simplifies driver handling of bus formats and prepares for DT support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/0a15e5100ca30d14953c93550eb1d4c2e18de939.1694767209.git.geert+renesas@glider.be
2023-10-16drm: renesas: shmobile: Use struct videomode in platform dataLaurent Pinchart
Replace the drm_mode_modeinfo field with videomode that includes more signal polarity flags. This simplifies driver handling of panel modes and prepares for DT support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [geert: Simplify] Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/4312e56de424d94399c6105e7159317eae86c9d5.1694767209.git.geert+renesas@glider.be
2023-10-16drm: renesas: shmobile: Remove support for SYS panelsLaurent Pinchart
SYS panels are not used, and have no defined DT bindings. Remove their support to avoid impeding DT support. It can always be added back later. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/4ccca2a5ac05c73ea9fd6e44b8bc443fd9d14e0d.1694767209.git.geert+renesas@glider.be
2023-10-16drm: renesas: shmobile: Remove backlight supportLaurent Pinchart
Backlight support should be implemented by panels, not by the LCDC driver. As the feature is currently unused anyway, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [geert: Cleanups] Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/69707650245bc2193d072f24723d4d5482ea590b.1694767209.git.geert+renesas@glider.be
2023-10-08hwmon: Annotate struct gsc_hwmon_platform_data with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct gsc_hwmon_platform_data. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230922175053.work.564-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2023-10-04OMAP/gpio: drop MPUIO static baseLinus Walleij
The OMAP GPIO driver hardcodes the MPIO chip base, but there is no point: we have already moved all consumers over to using descriptor look-ups. Drop the MPUIO GPIO base and use dynamic assignment. Root out the unused instances of the OMAP_MPUIO() macro and delete the unused OMAP_GPIO_IS_MPUIO() macro. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-10-04platform/chrome: cros_ec_proto: Mark outdata as constStephen Boyd
The 'outdata' is copied to the data buffer in cros_ec_cmd() before being sent over to the EC. Mark the argument as const so that callers can pass const pointers to this function and so that callers know the data won't be modified. Cc: Prashant Malani <pmalani@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20231003003429.1378109-5-swboyd@chromium.org Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
2023-10-02ASoC: ti: Convert TWL4030 to use GPIO descriptorsLinus Walleij
The TWL4030 is actually only ever populated from the device tree, so we can just pass the right device and headphone jack GPIO name to snd_soc_jack_add_gpios() and it will pick the right GPIO right from the device tree. The platform data patch is unused (no in-tree users of the pdata method) but these can use GPIO descriptor tables rather than global GPIO numbers if they need this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-3-60cf4f8adbc5@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-27media: cros-ec-cec: Get number of CEC ports from ECReka Norman
Add a new CEC port count host command and use it to query the number of CEC ports from the EC. If the host command is not supported then it must be old EC firmware which only supports one port, so fall back to assuming one port. This patch completes support for multiple ports in cros-ec-cec. Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: cros-ec-cec: Support receiving messages from multiple portsReka Norman
Currently, received messages are sent from the EC in the cec_message MKBP event. Since the size of ec_response_get_next_data_v1 is 16 bytes, which is also the maximum size of a CEC message, there is no space to add a port parameter. Increasing the size of ec_response_get_next_data_v1 is an option, but this would increase EC-kernel traffic for all MKBP event types. Instead, use an event to notify that data is ready, and add a new read command to read the data. For backwards compatibility with old EC firmware, continue to handle cec_message events as well. Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: cros-ec-cec: Support multiple ports in MKBP cec_eventsReka Norman
Use the top four bits of the cec_events MKBP event to store the port number. Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: cros-ec-cec: Support multiple ports in write commandReka Norman
Add a v1 of the CEC write command which contains a port parameter. Check which versions of the write command the EC supports and use the highest supported version. If it only supports v0, check that there is only one port. With v0, the EC will assume all write commands are for port 0. Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: cros-ec-cec: Support multiple ports in set/get host commandsReka Norman
Reuse the top four bits of the cmd field to specify the port number. The reason for doing this as opposed to adding a separate uint8_t field is it avoids the need to add new versions of these commands. The change is backwards compatible since these bits were previously always zero, so the default behaviour is to always operate on port 0. Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: cros-ec-cec: Manage an array of portsReka Norman
To support multiple CEC ports, change cros_ec_cec to contain an array of ports, each with their own CEC adapter, etc. For now, only create a single port and use that port everywhere, so there is no functional change. Support for multiple ports will be added in the following patches. Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-12platform/x86: asus-wmi: add support for ASUS screenpadLuke D. Jones
Add support for the WMI methods used to turn off and adjust the brightness of the secondary "screenpad" device found on some high-end ASUS laptops like the GX650P series and others. There are some small quirks with this device when considering only the raw WMI methods: 1. The Off method can only switch the device off 2. Changing the brightness turns the device back on 3. To turn the device back on the brightness must be > 1 4. When the device is off the brightness can't be changed (so it is stored by the driver if device is off). 5. Booting with a value of 0 brightness (retained by bios) means the bios will set a value of >0 <15 6. When the device is off it is "unplugged" asus_wmi sets the minimum brightness as 20 in general use, and 60 for booting with values <= min. The ACPI methods are used in a new backlight device named asus_screenpad. Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230830032237.42987-2-luke@ljones.dev Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-09-11gpio: pca953x: Drop unused fields in struct pca953x_platform_dataAndy Shevchenko
New code should solely use firmware nodes for the specifics and not any callbacks. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-07Merge tag 'rtc-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - Add a way for drivers to tell the core the supported alarm range is smaller than the date range. This is not used yet but will be useful for the alarmtimers in the next release. - fix Wvoid-pointer-to-enum-cast warnings - remove redundant of_match_ptr() - stop warning for invalid alarms when the alarm is disabled Drivers: - isl12022: allow setting the trip level for battery level detection - pcf2127: add support for PCF2131 and multiple timestamps - stm32: time precision improvement, many fixes - twl: NVRAM support" * tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits) dt-bindings: rtc: ds3231: Remove text binding rtc: wm8350: remove unnecessary messages rtc: twl: remove unnecessary messages rtc: sun6i: remove unnecessary message rtc: stop warning for invalid alarms when the alarm is disabled rtc: twl: add NVRAM support rtc: pcf85363: Allow to wake up system without IRQ rtc: m48t86: add DT support for m48t86 dt-bindings: rtc: Add ST M48T86 rtc: pcf2127: remove useless check rtc: rzn1: Report maximum alarm limit to rtc core rtc: ds1305: Report maximum alarm limit to rtc core rtc: tps6586x: Report maximum alarm limit to rtc core rtc: cmos: Report supported alarm limit to rtc infrastructure rtc: cros-ec: Detect and report supported alarm window size rtc: Add support for limited alarm timer offsets rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb() MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq() rtc: omap: Do not check for 0 return after calling platform_get_irq() ...
2023-09-01Merge tag 'fbdev-for-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: - Drop the mx3fb driver - Use list_for_each_entry() helper in fbcore code - Shorten neofb product names for fb-fix id field - reduce memory usage in ssd1307fb * tag 'fbdev-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Update fbdev source file paths fbdev: ssd1307fb: Use bool for ssd1307fb_deviceinfo flags fbdev: neofb: Shorten Neomagic product name in info struct fbdev: mx3fb: Remove the driver fbdev/core: Use list_for_each_entry() helper
2023-09-01Merge tag 'platform-drivers-x86-v6.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - hp-bioscfg: New firmware-attributes driver for changing BIOS settings from within Linux - asus-wmi: Add charger mode, middle fan and eGPU settings support - ideapad: Support keyboard backlight control on more models - mellanox: Support for new models - sel-3350: New LED and power-supply driver for this industrial mainboard - simatic-ipc: Add RTC battery monitor and various new models support - miscellaneous other cleanups / fixes * tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits) platform/x86: asus-wmi: corrections to egpu safety check platform/x86: mlx-platform: Add dependency on PCI to Kconfig platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol platform/x86/amd/pmc: Fix build error with randconfig platform/x86/amd/pmf: Fix a missing cleanup path watchdog: simatic: Use idiomatic selection of P2SB platform/x86: p2sb: Make the Kconfig symbol hidden Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform: mellanox: nvsw-sn2201: change fans i2c busses. platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing platform: mellanox: Add initial support for PCIe based programming logic device platform: mellanox: mlx-platform: Get interrupt line through ACPI platform: mellanox: mlx-platform: Introduce ACPI init flow platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure platform: mellanox: mlx-platform: Add reset callback platform: mellanox: Cosmetic changes platform: mellanox: mlx-platform: Modify power off callback platform: mellanox: mlx-platform: add support for additional CPLD platform: mellanox: mlx-platform: Add reset cause attribute platform: mellanox: mlx-platform: Modify health and power hotplug action ...
2023-08-31fbdev: mx3fb: Remove the driverFabio Estevam
The mx3fb driver does not support devicetree and i.MX has been converted to a DT-only platform since kernel 5.10. As there is no user for this driver anymore, just remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-30Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board. core: - fix gfp flags in drmm_kmalloc gpuva: - add new generic GPU VA manager (for nouveau initially) syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes backlight: - fix fbdev interactions atomic: - improve logging prime: - remove struct gem_prim_mmap plus driver updates gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer ttm: - support init_on_free - swapout fixes panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer radeon: - Lots of checkpatch cleanups ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues ivpu: - MMU updates - debugfs support - Support vpu4 virtio: - add sync object support atmel-hlcdc: - Support inverted pixclock polarity etnaviv: - runtime PM cleanups - hang handling fixes exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference komeda: - always attach encoder omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes loongson: - support display controller mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail mgag200: - minor fixes mxsfb: - support disabling overlay planes panfrost: - fix sync in IRQ handling ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates vkms: - improve write back support - docs fixes - support gamma LUT zynqmp-dpsub: - misc fixes" * tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ...
2023-08-24net: dsa: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: FLorian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230823085632.116725-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17rtc: ds2404: Convert to GPIO descriptorsLinus Walleij
This converts the DS2404 to use GPIO descriptors instead of hard-coded global GPIO numbers. The platform data can be deleted because there are no in-tree users and it only contained GPIO numbers which are now passed using descriptor tables (or device tree or ACPI). The driver was rewritten to use a state container for the device driver state (struct ds2404 *chip) and pass that around instead of using a global singleton storage for the GPIO handles. When declaring GPIO descriptor tables or other hardware descriptions for the RTC driver, implementers should take care to flag the RESET line as active low, such as by using the GPIOD_ACTIVE_LOW flag in the descriptor table. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230807-descriptors-rtc-v1-1-ce0f9187576e@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-07-31Merge tag 'ib-pdx86-simatic-v6.6-2' into review-hansHans de Goede
Immutable branch between pdx86 simatic branch and LED due for the v6.6 merge window ib-pdx86-simatic-v6.6-2: v6.5-rc1 + ib-pdx86-simatic-v6.6 + more recent pdx86 simatic-ipc patches for merging into the LED subsystem for v6.6.
2023-07-31platform/x86/siemens: simatic-ipc: add new models BX-56A/BX-59Axingtong.wu
This adds support for the Siemens Simatic IPC models BX-56A/BX-59A, led/watchdog/battery on these models are same, actual drivers for models will be sent in separate patches. Signed-off-by: xingtong.wu <xingtong.wu@siemens.com> Link: https://lore.kernel.org/r/20230731071424.4663-2-xingtong_wu@163.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-17Merge tag 'drm-misc-next-2023-07-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.6: UAPI Changes: * fbdev: * Make fbdev userspace interfaces optional; only leaves the framebuffer console active * prime: * Support dma-buf self-import for all drivers automatically: improves support for many userspace compositors Cross-subsystem Changes: * backlight: * Fix interaction with fbdev in several drivers * base: Convert struct platform.remove to return void; part of a larger, tree-wide effort * dma-buf: Acquire reservation lock for mmap() in exporters; part of an on-going effort to simplify locking around dma-bufs * fbdev: * Use Linux device instead of fbdev device in many places * Use deferred-I/O helper macros in various drivers * i2c: Convert struct i2c from .probe_new to .probe; part of a larger, tree-wide effort * video: * Avoid including <linux/screen_info.h> Core Changes: * atomic: * Improve logging * prime: * Remove struct drm_driver.gem_prime_mmap plus driver updates: all drivers now implement this callback with drm_gem_prime_mmap() * gem: * Support execution contexts: provides locking over multiple GEM objects * ttm: * Support init_on_free * Swapout fixes Driver Changes: * accel: * ivpu: MMU updates; Support debugfs * ast: * Improve device-model detection * Cleanups * bridge: * dw-hdmi: Improve support for YUV420 bus format * dw-mipi-dsi: Fix enable/disable of DSI controller * lt9611uxc: Use MODULE_FIRMWARE() * ps8640: Remove broken EDID code * samsung-dsim: Fix command transfer * tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups * Cleanups * ingenic: * Kconfig REGMAP fixes * loongson: * Support display controller * mgag200: * Minor fixes * mxsfb: * Support disabling overlay planes * nouveau: * Improve VRAM detection * Various fixes and cleanups * panel: * panel-edp: Support AUO B116XAB01.4 * Support Visionox R66451 plus DT bindings * Cleanups * ssd130x: * Support per-controller default resolution plus DT bindings * Reduce memory-allocation overhead * Cleanups * tidss: * Support TI AM625 plus DT bindings * Implement new connector model plus driver updates * vkms * Improve write-back support * Documentation fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
2023-07-14Merge tag 'ib-pdx86-simatic-v6.6' into review-hansHans de Goede
Immutable branch between pdx86 simatic branch and LED due for the v6.6 merge window v6.5-rc1 + recent pdx86 simatic-ipc patches for merging into the LED subsystem for v6.6.
2023-07-14platform/x86: simatic-ipc: add another modelHenning Schild
This is the panel variant of a device we already did have. All the same, just no LEDs. Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20230713144832.26473-2-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-14platform/x86: simatic-ipc: add CMOS battery monitoringHenning Schild
Siemens Simatic Industrial PCs can monitor the voltage of the CMOS battery with two bits that indicate low or empty state. This can be GPIO or PortIO based. Here we model that as a hwmon voltage. The core driver does the PortIO and provides boilerplate for the GPIO versions. Which are split out to model runtime dependencies while allowing fine-grained kernel configuration. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230706154831.19100-3-henning.schild@siemens.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-14platform/x86: simatic-ipc: add another model BX-21AHenning Schild
This adds support for the Siemens Simatic IPC model BX-21A. Actual drivers for that model will be sent in separate patches. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230713115639.16419-2-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-12platform/x86: asus-wmi: expose dGPU and CPU tunables for ROGLuke D. Jones
Expose various CPU and dGPU tunables that are available on many ASUS ROG laptops. The tunables shown in sysfs will vary depending on the CPU and dGPU vendor. All of these variables are write only and there is no easy way to find what the defaults are. In general they seem to default to the max value the vendor sets for the CPU and dGPU package - this is not the same as the min/max writable value. Values written to these variables that are beyond the capabilities of the CPU are ignored by the laptop. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230630053552.976579-9-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-28 10:05:02 +0000