summaryrefslogtreecommitdiff
path: root/include/linux/pxa2xx_ssp.h
AgeCommit message (Collapse)Author
2018-10-11spi: pxa2xx: Add devicetree supportLubomir Rintel
The MMP2 platform, that uses device tree, has this controller. Let's add devicetree alongside platform & PCI. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-11spi: pxa2xx: Use an enum for typeLubomir Rintel
That seems to be the correct type. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: pxa-ssp: remove .set_pll() and .set_clkdiv() callbacksDaniel Mack
The .set_pll() and .set_clkdiv() callbacks are considered legacy and should not be used anymore. In order to support PXA boards on DT platforms, remove them and let the code figure out the correct dividers and PLL base frequencies itself. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ARM: pxa: change SSP DMA channels allocationRobert Jarzmik
Now the dma_slave_map is available for PXA architecture, switch the SSP device to it. This specifically means that : - for platform data based machines, the DMA requestor channels are extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to ssp.<N>, and the channels are either "rx" or "tx". - for device tree platforms, the dma node should be hooked into the pxa2xx-ac97 or pxa-ssp-dai node. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Daniel Mack <daniel@zonque.org>
2017-06-06spi: pxa2xx: Add support for Intel CannonlakeJarkko Nikula
Intel Cannonlake LPSS SPI has up to four chip selects per port like in Broxton and is clocked like Sunrisepoint and Kaby Lake. Add a new type LPSS_CNL_SSP and configuration that enable runtime chip select detection and use the same FIFO thresholds than in Sunrisepoint. Patch adds support for both Cannonlake SoC and PCH. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-04spi: pxa2xx: fix indentation of the comments in headerAndy Shevchenko
Just for sake of readability fix the indentation of the comments in pxa2xx_ssp.h header file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: pxa2xx: Default thresholds to PXA configurationAndy Shevchenko
Most of the devices in the supported list have PXA configuration of FIFO. In particularly Intel Medfield and Merrifield have bigger FIFO, than it's defined for CE4100. Split CE4100 in the similar way how it was done for Intel Quark, i.e. prefix definitions by CE4100 and append necessary pieces of code to switch case conditions. We are on safe side since those bits are ignored on all LPSS IPs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09spi: pxa2xx: Add support for both chip selects on Intel BraswellMika Westerberg
Intel Braswell LPSS SPI controller actually has two chip selects and there is no capabilities register where this could be found out. These two chip selects are controlled by bits which are in slightly differrent location than Broxton has. Braswell Windows driver also starts chip select (ACPI DeviceSelection) numbering from 1 so translate it to be suitable for Linux as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30spi: pxa2xx: Add support for Intel BroxtonJarkko Nikula
LPSS SPI in Intel Broxton is otherwise the same than in Intel Sunrisepoint but it supports up to four chip selects per port and has different FIFO thresholds. Patch adds support for two Broxton SoC variants. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-31spi: pxa2xx: Add support for Intel SunrisepointJarkko Nikula
Major difference in LPSS SPI between Intel Sunrisepoint PCH and earlier platforms is an integrated DMA (iDMA) engine. iDMA is an IP that is private for each LPSS host controller (UART/SPI/I2C). Other differences are private register space offset, a few private registers that are in different location and FIFO thresholds. Intel Sunrisepoint LPSS SPI and iDMA devices are probed and registered in MFD layer as platform devices. Here these compound devices are detected by matching against known PCI IDs. This allows us to share pxa2xx_spi_acpi_get_pdata() for setting up the platform data instead of duplicating it in MFD part. This patch adds configuration for Intel Sunrisepoint LPSS SPI, above detection and DMA filter function that picks the DMA channel only from an associated iDMA block. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05spi: pxa2xx: Prepare for new Intel LPSS SPI typeJarkko Nikula
Some of the Intel LPSS SPI properties will be different in upcoming platforms compared to existing Lynxpoint and BayTrail/Braswell. LPSS SPI private registers will be at different offset and there will be changes in individual registers and default FIFO thresholds too. Add configuration for these differences and use them in runtime based on LPSS SSP type. With this change private registers offset autodetection becomes needless. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05spi: pxa2xx: Differentiate Intel LPSS typesJarkko Nikula
Intel LPSS SPI properties differ between between platforms. Now private registers offset 0x400 or 0x800 is autodetected but there is need to support also other offset and handle a few other differences. Prepare for that by splitting the LPSS_SSP type into compatible hardware types and set it now based on PCI or ACPI ID. That type will be used to set properties that differ between current and upcoming platforms. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: pxa2xx: Add definition for Intel Quark DDS_RATE registerJarkko Nikula
Intel Quark DDS_RATE register is defined only in register access macro. Add a definition for it to common SSP register definitions for preparing to cleanup those macros. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26spi: spi-pxa2xx: SPI support for Intel Quark X1000Weike Chen
There are two SPI controllers exported by PCI subsystem for Intel Quark X1000. The SPI memory mapped I/O registers supported by Quark are different from the current implementation, and Quark only supports the registers of 'SSCR0', 'SSCR1', 'SSSR', 'SSDR', and 'DDS_RATE'. This patch is to enable the SPI for Intel Quark X1000. This piece of work is derived from Dan O'Donovan's initial work for Intel Quark X1000 SPI enabling. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Weike Chen <alvin.chen@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-03-21ARM: pxa: fix pxa_ssp_* declarationsArnd Bergmann
The functions declared in include/linux/pxa2xx_ssp.h are defined in plat-pxa/ssp.c, which can also be built for PLAT_MMP, but may be disabled there. This can lead to both unresolved symbols at link time and to duplicate symbols at compile time for random configurations. Changing the #ifdef in the header file to match the Kconfig symbol that decides if the file is built solves both problems. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Mack <zonque@gmail.com>
2013-08-14ARM: pxa: ssp: add pxa_ssp_request_of()Daniel Mack
Add a function to lookup ssp devices from device tree. This way, users can reference the ssp devices in order to register to them. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-02-08spi/pxa2xx: add support for Intel Low Power Subsystem SPIMika Westerberg
Intel LPSS SPI is pretty much the same as the PXA27xx SPI except that it has few additional features over the original: o FIFO depth is 256 entries o RX FIFO has one watermark o TX FIFO has two watermarks, low and high o chip select can be controlled by writing to a register The new FIFO registers follow immediately the PXA27xx registers but then there are some additional LPSS private registers at offset 1k or 2k from the base address. For these private registers we add new accessors that take advantage of drv_data->lpss_base once it is resolved. We add a new type LPSS_SSP that can be used to distinguish the LPSS devices from others. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lu Cao <lucao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08spi/pxa2xx: embed the ssp_device to platform dataMika Westerberg
The spi-pxa2xx-pci glue driver had to implement pxa_ssp_request()/free() in order to support the spi-pxa2xx platform driver. Since the ACPI enabled platforms can use the same platform driver we would need to implement pxa_ssp_request()/free() in some central place that can be shared by the ACPI and PCI glue code. Instead of doing that we can make pxa_ssp_request()/free() to be available only when CONFIG_ARCH_PXA is set. On other arches these are being stubbed out in preference to passing the ssp_device from the platform data directly. We also change the SPI bus number to be taken from ssp->port_id instead of platform device id. This way the supporting code that passes the ssp can decide the number (or it can set it to the same as pdev->id). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ASoC: fix pxa-ssp compiling issue under mach-mmpQiao Zhou
pxa-ssp.c uses API like cpu_is_pxa3xx(), cpu_is_pxa2xx(), which is defined under arch-pxa architecture, and drivers under mach-mmp can't find it. so just use ssp->type to replace that API. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11ARM: MMP: add pxa910-ssp into ssp_id_tableQiao Zhou
add pxa910-ssp into ssp_id_table, and fix pxa-ssp compiling issue under mach-mmp architect. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-02spi/pxa2xx: Add chipselect support for SodavilleSebastian Andrzej Siewior
The SPI core on Sodaville supports chip selects. Its configuration moved into the SSSR register at bit 0 and 1. Thus Sodaville can be hooked up with up to 4 devices. This patch ensures that the bits which are otherwiese reserved are only touched on Sodaville and not on any other PXAs. Also it makes sure that the status register does not lose the CS information while clearing the ROR bit. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-01spi/pxa2xx: Consider CE4100's FIFO depthSebastian Andrzej Siewior
For PXA the default threshold is FIFO_DEPTH / 2. Adjust this value for CE4100. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-01arm/pxa2xx: reorgazine SSP and SPI header filesSebastian Andrzej Siewior
The PXA-SPI driver relies on some files / defines which are arm specific and are within the ARM tree. The CE4100 SoC which is x86 has also the SPI core. This patch moves the ssp and spi files from arm/mach-pxa and plat-pxa to include/linux where the CE4100 can access them. This move got verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>