summaryrefslogtreecommitdiff
path: root/include/linux/ratelimit.h
AgeCommit message (Collapse)Author
2020-07-27printk: Make linux/printk.h self-containedHerbert Xu
As it stands if you include printk.h by itself it will fail to compile because it requires definitions from ratelimit.h. However, simply including ratelimit.h from printk.h does not work due to inclusion loops involving sched.h and kernel.h. This patch solves this by moving bits from ratelimit.h into a new header file which can then be included by printk.h without any worries about header loops. The build bot then revealed some intriguing failures arising out of this patch. On s390 there is an inclusion loop with asm/bug.h and linux/kernel.h that triggers a compile failure, because kernel.h will cause asm-generic/bug.h to be included before s390's own asm/bug.h has finished processing. This has been fixed by not including kernel.h in arch/s390/include/asm/bug.h. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Link: https://lore.kernel.org/r/20200721062248.GA18383@gondor.apana.org.au
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-20ratelimit: fix WARN_ON_RATELIMIT return valueJiri Slaby
The macro is to be used similarly as WARN_ON as: if (WARN_ON_RATELIMIT(condition, state)) do_something(); One would expect only 'condition' to affect the 'if', but WARN_ON_RATELIMIT does internally only: WARN_ON((condition) && __ratelimit(state)) So the 'if' is affected by the ratelimiting state too. Fix this by returning 'condition' in any case. Note that nobody uses WARN_ON_RATELIMIT yet, so there is nothing to worry about. But I was about to use it and was a bit surprised. Link: http://lkml.kernel.org/r/20161215093224.23126-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02ratelimit: extend to print suppressed messages on releaseBorislav Petkov
Extend the ratelimiting facility to print the amount of suppressed lines when it is being released. This use case is aimed at short-termed, burst-like users for which we want to output the suppressed lines stats only once, after it has been disposed of. For an example, see /dev/kmsg usage in a follow-on patch. Also, change the printk() line we issue on release to not use "callbacks" as it is misleading: we're not suppressing callbacks but printk() calls. This has been separated from a previous patch by Linus. Link: http://lkml.kernel.org/r/20160716061745.15795-2-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Dave Young <dyoung@redhat.com> Cc: Franck Bui <fbui@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13ratelimit: add initialization macroDmitry Monakhov
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05tty: Fix bogus "callbacks suppressed" messagesMarkus Trippelsdorf
On the current git tree one sees messages such as: tty_init_dev: 24 callbacks suppressed tty_init_dev: 3 callbacks suppressed To fix this we need to look at condition before calling __ratelimit in the WARN_RATELIMIT macro. While at it remove the superfluous __WARN_RATELIMIT macros. Original patch is from Joe Perches and Jiri Slaby. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-and-tested-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-09-13locking, printk: Annotate logbuf_lock as rawThomas Gleixner
The logbuf_lock lock can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ merged and fixed it ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-26bug.h: Move ratelimit warn interfaces to ratelimit.hDavid S. Miller
As reported by Ingo Molnar, we still have configuration combinations where use of the WARN_RATELIMIT interfaces break the build because dependencies don't get met. Instead of going down the long road of trying to make it so that ratelimit.h can get included by kernel.h or asm-generic/bug.h, just move the interface into ratelimit.h and make users have to include that. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2010-10-26printk: declare printk_ratelimit_state in ratelimit.hNamhyung Kim
Adding declaration of printk_ratelimit_state in ratelimit.h removes potential build breakage and following sparse warning: kernel/printk.c:1426:1: warning: symbol 'printk_ratelimit_state' was not declared. Should it be static? [akpm@linux-foundation.org: remove unneeded ifdef] Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25ratelimit: add ratelimit_state_init()OGAWA Hirofumi
For now, all users of ratelimit_state allocates it statically, so DEFINE_RATELIMIT_STATE() is enough. But, I want to use ratelimit_state for fs, i.e. per super_block to suppress too many error reports. So, this adds ratelimit_state_init() to initialize ratelimite_state which is dynamically allocated, instead of opencoding. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-23ratelimit: Make suppressed output messages more usefulChristian Borntraeger
Today I got: [39648.224782] Registered led device: iwl-phy0::TX [40676.545099] __ratelimit: 246 callbacks suppressed [40676.545103] abcdef[23675]: segfault at 0 ... as you can see the ratelimit message contains a function prefix. Since this is always __ratelimit, this wont help much. This patch changes __ratelimit and printk_ratelimit to print the function name that calls ratelimit. This will pinpoint the responsible function, as long as not several different places call ratelimit with the same ratelimit state at the same time. In that case we catch only one random function that calls ratelimit after the wait period. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> CC: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <200910231458.11832.borntraeger@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22ratelimit: Use per ratelimit context lockingIngo Molnar
I'd like to use printk_ratelimit() in atomic context, but that's not possible right now due to the spinlock usage this commit introduced more than a year ago: 717115e: printk ratelimiting rewrite As a first step push the lock into the ratelimit state structure. This allows us to deal with locking failures to be considered as an event related to that state being too busy. Also clean up the code a bit (without changing functionality): - tidy up the definitions - clean up the code flow This also shrinks the code a tiny bit: text data bss dec hex filename 264 0 4 268 10c ratelimit.o.before 255 0 0 255 ff ratelimit.o.after ( Whole-kernel data size got a bit larger, because we have two ratelimit-state data structures right now. ) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12remove ratelimt()Andrew Morton
It mistakenly assumes that a static local in an inlined function is a kernel-wide singleton. It also has no callers, so let's remove it. Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25printk ratelimiting rewriteDave Young
All ratelimit user use same jiffies and burst params, so some messages (callbacks) will be lost. For example: a call printk_ratelimit(5 * HZ, 1) b call printk_ratelimit(5 * HZ, 1) before the 5*HZ timeout of a, then b will will be supressed. - rewrite __ratelimit, and use a ratelimit_state as parameter. Thanks for hints from andrew. - Add WARN_ON_RATELIMIT, update rcupreempt.h - remove __printk_ratelimit - use __ratelimit in net_ratelimit Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>