| Age | Commit message (Collapse) | Author |
|---|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- Multiple patches to add support for fcntl() leases over NFSv4.
- A sysfs interface to display more information about the various
transport connections used by the RPC client
- A sysfs interface to allow a suitably privileged user to offline a
transport that may no longer point to a valid server
- A sysfs interface to allow a suitably privileged user to change the
server IP address used by the RPC client
Stable fixes:
- Two sunrpc fixes for deadlocks involving privileged rpc_wait_queues
Bugfixes:
- SUNRPC: Avoid a KASAN slab-out-of-bounds bug in xdr_set_page_base()
- SUNRPC: prevent port reuse on transports which don't request it.
- NFSv3: Fix memory leak in posix_acl_create()
- NFS: Various fixes to attribute revalidation timeouts
- NFSv4: Fix handling of non-atomic change attribute updates
- NFSv4: If a server is down, don't cause mounts to other servers to
hang as well
- pNFS: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT
- NFS: Fix mount failures due to incorrect setting of the
has_sec_mnt_opts filesystem flag
- NFS: Ensure nfs_readpage returns promptly when an internal error
occurs
- NFS: Fix fscache read from NFS after cache error
- pNFS: Various bugfixes around the LAYOUTGET operation"
* tag 'nfs-for-5.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (46 commits)
NFSv4/pNFS: Return an error if _nfs4_pnfs_v3_ds_connect can't load NFSv3
NFSv4/pNFS: Don't call _nfs4_pnfs_v3_ds_connect multiple times
NFSv4/pnfs: Clean up layout get on open
NFSv4/pnfs: Fix layoutget behaviour after invalidation
NFSv4/pnfs: Fix the layout barrier update
NFS: Fix fscache read from NFS after cache error
NFS: Ensure nfs_readpage returns promptly when internal error occurs
sunrpc: remove an offlined xprt using sysfs
sunrpc: provide showing transport's state info in the sysfs directory
sunrpc: display xprt's queuelen of assigned tasks via sysfs
sunrpc: provide multipath info in the sysfs directory
NFSv4.1 identify and mark RPC tasks that can move between transports
sunrpc: provide transport info in the sysfs directory
SUNRPC: take a xprt offline using sysfs
sunrpc: add dst_attr attributes to the sysfs xprt directory
SUNRPC for TCP display xprt's source port in sysfs xprt_info
SUNRPC query transport's source port
SUNRPC display xprt's main value in sysfs's xprt_info
SUNRPC mark the first transport
sunrpc: add add sysfs directory per xprt under each xprt_switch
...
|
|
Once a transport has been put offline, this transport can be also
removed from the list of transports. Any tasks that have been stuck
on this transport would find the next available active transport
and be re-tried. This transport would be removed from the xprt_switch
list and freed.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
In preparation for when we can re-try a task on a different transport,
identify and mark such RPC tasks as moveable. Only 4.1+ operarations can
be re-tried on a different transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Using sysfs's xprt_state attribute, mark a particular transport offline.
It will not be picked during the round-robin selection. It's not allowed
to take the main (1st created transport associated with the rpc_client)
offline. Also bring a transport back online via sysfs by writing "online"
and that would allow for this transport to be picked during the round-
robin selection.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Provide ability to query transport's source port.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When an RPC client gets created it's first transport is special
and should be marked a main transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Allow to query and set the destination's address of a transport.
Setting of the destination address is allowed only for TCP or RDMA
based connections.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Add individual transport directories under each transport switch
group. For instance, for each nconnect=X connections there will be
a transport directory. Naming conventions also identifies transport
type -- xprt-<id>-<type> where type is udp, tcp, rdma, local, bc.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Add xprt_switch directory to the sysfs and create individual
xprt_swith subdirectories for multipath transport group.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We need to keep track of the type for a given transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This is used to uniquely identify sunrpc multipath objects in /sys.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This adds a unique identifier for a sunrpc transport in sysfs, which is
similarly managed to the unique IDs of clients.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
These will eventually have files placed under them for sysfs operations.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out kstrtox() and
simple_strtox() helpers.
At the same time convert users in header and lib folders to use new
header. Though for time being include new header back to kernel.h to
avoid twisted indirected includes for existing users.
[andy.shevchenko@gmail.com: fix documentation references]
Link: https://lkml.kernel.org/r/20210615220003.377901-1-andy.shevchenko@gmail.com
Link: https://lkml.kernel.org/r/20210611185815.44103-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Kars Mulder <kerneldev@karsmulder.nl>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure that we fix the XPRT_CONGESTED starvation issue for RDMA as well
as socket based transports.
Ensure we always initialise the request after waking up from the backlog
list.
Fixes: e877a88d1f06 ("SUNRPC in case of backlog, hand free slots directly to waiting task")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Add validation of the UDP retrans parameter to prevent shift
out-of-bounds
- Don't discard pNFS layout segments that are marked for return
Bugfixes:
- Fix a NULL dereference crash in xprt_complete_bc_request() when the
NFSv4.1 server misbehaves.
- Fix the handling of NFS READDIR cookie verifiers
- Sundry fixes to ensure attribute revalidation works correctly when
the server does not return post-op attributes.
- nfs4_bitmask_adjust() must not change the server global bitmasks
- Fix major timeout handling in the RPC code.
- NFSv4.2 fallocate() fixes.
- Fix the NFSv4.2 SEEK_HOLE/SEEK_DATA end-of-file handling
- Copy offload attribute revalidation fixes
- Fix an incorrect filehandle size check in the pNFS flexfiles driver
- Fix several RDMA transport setup/teardown races
- Fix several RDMA queue wrapping issues
- Fix a misplaced memory read barrier in sunrpc's call_decode()
Features:
- Micro optimisation of the TCP transmission queue using TCP_CORK
- statx() performance improvements by further splitting up the
tracking of invalid cached file metadata.
- Support the NFSv4.2 'change_attr_type' attribute and use it to
optimise handling of change attribute updates"
* tag 'nfs-for-5.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (85 commits)
xprtrdma: Fix a NULL dereference in frwr_unmap_sync()
sunrpc: Fix misplaced barrier in call_decode
NFSv4.2: Remove ifdef CONFIG_NFSD from NFSv4.2 client SSC code.
xprtrdma: Move fr_mr field to struct rpcrdma_mr
xprtrdma: Move the Work Request union to struct rpcrdma_mr
xprtrdma: Move fr_linv_done field to struct rpcrdma_mr
xprtrdma: Move cqe to struct rpcrdma_mr
xprtrdma: Move fr_cid to struct rpcrdma_mr
xprtrdma: Remove the RPC/RDMA QP event handler
xprtrdma: Don't display r_xprt memory addresses in tracepoints
xprtrdma: Add an rpcrdma_mr_completion_class
xprtrdma: Add tracepoints showing FastReg WRs and remote invalidation
xprtrdma: Avoid Send Queue wrapping
xprtrdma: Do not wake RPC consumer on a failed LocalInv
xprtrdma: Do not recycle MR after FastReg/LocalInv flushes
xprtrdma: Clarify use of barrier in frwr_wc_localinv_done()
xprtrdma: Rename frwr_release_mr()
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
xprtrdma: Delete rpcrdma_recv_buffer_put()
xprtrdma: Fix cwnd update ordering
...
|
|
When we have multiple RPC requests queued up, it makes sense to set the
TCP_CORK option while the transmit queue is non-empty.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
These fields are no longer used.
The size of struct svc_rdma_recv_ctxt is now less than 300 bytes on
x86_64, down from 2440 bytes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that svc_rdma_recvfrom() waits for Read completion,
sc_read_complete_q is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prepare svc_xprt_received() to be called from transport code instead
of from generic RPC server code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up. This significantly reduces the size of struct
svc_rdma_send_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently svc_rdma_sendto() migrates xdr_buf pages into a separate
page list and NULLs out a bunch of entries in rq_pages while the
pages are under I/O. The Send completion handler then frees those
pages later.
Instead, let's wait for the Send completion, then handle page
releasing in the nfsd thread. I'd like to avoid the cost of 250+
put_page() calls in the Send completion handler, which is single-
threaded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor a bit of commonly used logic so that every site that wants
a close deferred to an nfsd thread does all the right things
(set_bit(XPT_CLOSE) then enqueue).
Also, once XPT_CLOSE is set on a transport, it is never cleared. If
XPT_CLOSE is already set, then the close is already being handled
and the enqueue can be skipped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Post more Receives when the number of pending Receives drops below
a water mark. The batch mechanism is disabled if the underlying
device cannot support a reasonably-sized Receive Queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSD initializes an encode xdr_stream only after the RPC layer has
already inserted the RPC Reply header. Thus it behaves differently
than xdr_init_encode does, which assumes the passed-in xdr_buf is
entirely devoid of content.
nfs4proc.c has this server-side stream initialization helper, but
it is visible only to the NFSv4 code. Move this helper to a place
that can be accessed by NFSv2 and NFSv3 server XDR functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I tested commit 43042b90cae1 ("svcrdma: Reduce Receive doorbell
rate") with mlx4 (IB) and software iWARP and didn't find any
issues. However, I recently got my hardware iWARP setup back on
line (FastLinQ) and it's crashing hard on this commit (confirmed
via bisect).
The failure mode is complex.
- After a connection is established, the first Receive completes
normally.
- But the second and third Receives have garbage in their Receive
buffers. The server responds with ERR_VERS as a result.
- When the client tears down the connection to retry, a couple
of posted Receives flush twice, and that corrupts the recv_ctxt
free list.
- __svc_rdma_free then faults or loops infinitely while destroying
the xprt's recv_ctxts.
Since 43042b90cae1 ("svcrdma: Reduce Receive doorbell rate") does
not fix a bug but is a scalability enhancement, it's safe and
appropriate to revert it while working on a replacement.
Fixes: 43042b90cae1 ("svcrdma: Reduce Receive doorbell rate")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd updates from Chuck Lever:
"Here are a few additional NFSD commits for the merge window:
Optimization:
- Cork the socket while there are queued replies
Fixes:
- DRC shutdown ordering
- svc_rdma_accept() lockdep splat"
* tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Further clean up svc_tcp_sendmsg()
SUNRPC: Remove redundant socket flags from svc_tcp_sendmsg()
SUNRPC: Use TCP_CORK to optimise send performance on the server
svcrdma: Hold private mutex while invoking rdma_accept()
nfsd: register pernet ops last, unregister first
|
|
Pull nfsd updates from Chuck Lever:
- Update NFSv2 and NFSv3 XDR decoding functions
- Further improve support for re-exporting NFS mounts
- Convert NFSD stats to per-CPU counters
- Add batch Receive posting to the server's RPC/RDMA transport
* tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (65 commits)
nfsd: skip some unnecessary stats in the v4 case
nfs: use change attribute for NFS re-exports
NFSv4_2: SSC helper should use its own config.
nfsd: cstate->session->se_client -> cstate->clp
nfsd: simplify nfsd4_check_open_reclaim
nfsd: remove unused set_client argument
nfsd: find_cpntf_state cleanup
nfsd: refactor set_client
nfsd: rename lookup_clientid->set_client
nfsd: simplify nfsd_renew
nfsd: simplify process_lock
nfsd4: simplify process_lookup1
SUNRPC: Correct a comment
svcrdma: DMA-sync the receive buffer in svc_rdma_recvfrom()
svcrdma: Reduce Receive doorbell rate
svcrdma: Deprecate stat variables that are no longer used
svcrdma: Restore read and write stats
svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter
svcrdma: Convert rdma_stat_recv to a per-CPU counter
svcrdma: Refactor svc_rdma_init() and svc_rdma_clean_up()
...
|
|
Use a counter to keep track of how many requests are queued behind the
xprt->xpt_mutex, and keep TCP_CORK set until the queue is empty.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/linux-nfs/20210213202532.23146-1-trondmy@kernel.org/T/#u
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Remove duplicated helper functions to parse opaque XDR objects
and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h.
In the new file carry the license and copyright from the source file
net/sunrpc/auth_gss/auth_gss.c. Finally, update the comment inside
include/linux/sunrpc/xdr.h since lockd is not the only user of
struct xdr_netobj.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This is similar to commit e340c2d6ef2a ("xprtrdma: Reduce the
doorbell rate (Receive)") which added Receive batching to the
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up. We are not permitted to remove old proc files. Instead,
convert these variables to stubs that are only ever allowed to
display a value of zero.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that we have an efficient mechanism to update these two stats,
let's start maintaining them again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Avoid the overhead of a memory bus lock cycle for counting a value
that is hardly every used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Receives are frequent events. Avoid the overhead of a memory bus
lock cycle for counting a value that is hardly every used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: The unit of XDR alignment is defined by RFC 4506,
not as part of the RPC message header. Thus it belongs in
include/linux/sunrpc/xdr.h.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The next few patches will employ these strings to help make server-
side trace logs more human-readable. A similar technique is already
in use in kernel RPC client code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support
- A series of patches to improve readdir performance, particularly
with large directories
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers
- Micro-optimisations for RDMA
- RDMA tracing improvements
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving
partial pages (Dan Aloni)
- Various fixes for getxattr and listxattr, when used over non-TCP
transports
- Fixes for containerised NFS from Sargun Dhillon
- switch nfsiod to be an UNBOUND workqueue (Neil Brown)
- READDIR should not ask for security label information if there is
no LSM policy (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum
Mackay)
- A series of RPC and NFS layer fixes to support the NFSv4.2
READ_PLUS code
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes"
* tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read()
pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read
NFSv4/pnfs: Add tracing for the deviceid cache
fs/lockd: convert comma to semicolon
NFSv4.2: fix error return on memory allocation failure
NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet
NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow
NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow
NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer
NFSv4.2: decode_read_plus_hole() needs to check the extent offset
NFSv4.2: decode_read_plus_data() must skip padding after data segment
NFSv4.2: Ensure we always reset the result->count in decode_read_plus()
SUNRPC: When expanding the buffer, we may need grow the sparse pages
SUNRPC: Cleanup - constify a number of xdr_buf helpers
SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field
SUNRPC: _copy_to/from_pages() now check for zero length
SUNRPC: Cleanup xdr_shrink_bufhead()
SUNRPC: Fix xdr_expand_hole()
SUNRPC: Fixes for xdr_align_data()
SUNRPC: _shift_data_left/right_pages should check the shift length
...
|
|
There are a number of xdr helpers for struct xdr_buf that do not change
the structure itself. Mark those as taking const pointers for
documentation purposes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We do want to try to grow the buffer if possible, but if that attempt
fails, we still want to move the data and truncate the XDR message.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The main use case right now for xdr_align_data() is to shift the page
data to the left, and in practice shrink the total XDR data buffer.
This patch ensures that we fix up the accounting for the buffer length
as we shift that data around.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5ebe8 ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Refactor for clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Convert the READ_BUF macro in nfs4xdr.c from open code to instead
use the new xdr_stream-style decoders already in use by the encode
side (and by the in-kernel NFS client implementation). Once this
conversion is done, each individual NFSv4 argument decoder can be
independently cleaned up to replace these macros with C code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A "permanent" struct xdr_stream is allocated in struct svc_rqst so
that it is usable by all server-side decoders. A per-rqst scratch
buffer is also allocated to handle decoding XDR data items that
cross page boundaries.
To demonstrate how it will be used, add the first call site for the
new svcxdr_init_decode() API.
As an additional part of the overall conversion, add symbolic
constants for successful and failed XDR operations. Returning "0" is
overloaded. Sometimes it means something failed, but sometimes it
means success. To make it more clear when XDR decoding functions
succeed or fail, introduce symbolic constants.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
