summaryrefslogtreecommitdiff
path: root/include/linux/usb
AgeCommit message (Collapse)Author
2021-02-03net: usb: cdc_ncm: use new API for bh taskletEmil Renner Berthing
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") It is unfortunate that we need to add a pointer to the driver context to get back to the usbnet device, but the space will be reclaimed once there are no more users of the old API left and we can remove the data value and flag from the tasklet struct. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210130234637.26505-1-kernel@esmil.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03usb: pd: Update VDO definitionsKyle Tso
"PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10" introduces several changes regarding the ID Header VDO and the Product Type VDOs. Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210202161733.932215-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-02usb: typec: Return void in typec_partner_set_pd_revisionKyle Tso
typec_partner_set_pd_revision doesn't need any return value. Fixes: 29b01295a829 ("usb: typec: Add typec_partner_set_pd_revision") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210202095512.761214-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-02usb: typec: tcpm: Add Callback to Usb Communication capable partnerBadhri Jagan Sridharan
The USB Communications Capable bit indicates if port partner is capable of communication over the USB data lines (e.g. D+/- or SS Tx/Rx). Notify the status of the bit to low level drivers to perform chip specific operation. For instance, low level driver enables USB switches on D+/D- lines to set up data path when the bit is set. Refactored from patch initially authored by Kyle Tso <kyletso@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210202003101.221145-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-01usb: typec: Add typec_partner_set_pd_revisionBenson Leung
The partner's PD revision may be resolved later than the port partner registration since the port partner creation may take place once Type-C detects the port has changed state, but before PD communication is completed. Add a setter so that the partner's PD revision can be attached to it once it becomes available. If the revision is set to a valid version (not 0), the setter will also refresh the partner's usb_pd flag and notify on "supports_usb_power_delivery" sysfs property as well. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Benson Leung <bleung@chromium.org> Link: https://lore.kernel.org/r/20210129061406.2680146-4-bleung@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-01usb: typec: Provide PD Specification Revision for cable and partnerBenson Leung
The USB Power Delivery specification Section 6.2.1.1.5 outlines revision backward compatibility requirements starting from Revision 3.0. The Port, the Cable Plug, and the Port Partner may support either revision 2 or revision 3 independently, and communication between ports, partners, and cables of different revisions are allowed under rules that the parties agree to communicate between each other using the lowest common operating revision. This may mean that Port-to-Partner operating revision comms may be different than Port-to-CablePlug operating revision comms. For example, it is possible for a R3.0 port to communicate with a R3.0 partner using R3.0 messages, while the R3.0 port (in the same session) must communicate with the R2.0 cable using R2.0 messages only. Introduce individual revision number properties for cable and port partner so that the port can track them independently. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Benson Leung <bleung@chromium.org> Link: https://lore.kernel.org/r/20210129061406.2680146-3-bleung@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25usb: typec: tcpm: Create legacy PDOs for PD2 connectionKyle Tso
If the port partner is PD2, the PDOs of the local port should follow the format defined in PD2 Spec. Dynamically modify the pre-defined PD3 PDOs and transform them into PD2 format before sending them to the PD2 port partner. Reviewed-by: Guenter Roeck <linux@roeckus.net> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210115163311.391332-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25Merge v5.11-rc5 into usb-nextGreg Kroah-Hartman
We need the fixes in here and this resolves a merge issue with drivers/usb/gadget/udc/bdc/Kconfig. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21usb: typec: tcpm: Protocol Error handlingKyle Tso
PD3.0 Spec 6.8.1 describes how to handle Protocol Error. There are general rules defined in Table 6-61 which regulate incoming Message handling. If the incoming Message is unexpected, unsupported, or unrecognized, Protocol Error occurs. Follow the rules to handle these situations. Also consider PD2.0 connection (PD2.0 Spec Table 6-36) for backward compatibilities. To know the types of AMS in all the recipient's states, identify those AMS who are initiated by the port partner but not yet recorded in the current code. Besides, introduce a new state CHUNK_NOT_SUPP to delay the NOT_SUPPORTED message after receiving a chunked message. Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210114145053.1952756-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21usb: typec: tcpm: AMS and Collision AvoidanceKyle Tso
This patch provides the implementation of Collision Avoidance introduced in PD3.0. The start of each Atomic Message Sequence (AMS) initiated by the port will be denied if the current AMS is not interruptible. The Source port will set the CC to SinkTxNG if it is going to initiate an AMS, and SinkTxOk otherwise. Meanwhile, any AMS initiated by a Sink port will be denied in TCPM if the port partner (Source) sets SinkTxNG except for HARD_RESET and SOFT_RESET. Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210114145053.1952756-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-20net: usb: cdc_ncm: don't spew notificationsGrant Grundler
RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18usb: gadget: Introduce udc_set_ssp_rate() for SSPThinh Nguyen
A SuperSpeed Plus device may operate at different speed and lane count (i.e. gen2x2, gen1x2, or gen2x1). Introduce gadget ops udc_set_ssp_rate() to set the desire corresponding usb_ssp_rate for SuperSpeed Plus capable devices. If the USB device supports different speeds at SuperSpeed Plus, set the device to operate with the maximum number of lanes and speed. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/9b85357cdadc02e3f0d653fd05f89eb46af836e1.1610592135.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-18usb: gadget: Introduce SSP rates and lanesThinh Nguyen
A USB device controller operating in SuperSpeed Plus may support gen2x1, gen1x2, and/or gen2x2. Introduce SuperSpeed Plus signaling rate generation and lane count to usb_gadget with the fields ssp_rate and max_ssp_rate. The gadget driver can use these to setup the device BOS descriptor and select the desire operating speed and number of lanes. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/b6d2196dcc3c73747f91abf9a082b20bbe276cc4.1610592135.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-18usb: ch9: Add USB 3.2 SSP attributesThinh Nguyen
In preparation for USB 3.2 dual-lane support, add sublink speed attribute macros and enum usb_ssp_rate. A USB device that operates in SuperSpeed Plus may operate at different speed and lane count. These additional macros and enum values help specifying that. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ae9293ebd63a29f2a2035054753534d9eb123d74.1610592135.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13usb: chipidea: tegra: Support host modePeter Geis
Add USB host mode to the Tegra HDRC driver. This allows us to benefit from support provided by the generic ChipIdea driver instead of duplicating the effort in a separate ehci-tegra driver. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201218120246.7759-6-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13usb: phy: tegra: Support waking up from a low power modeDmitry Osipenko
Support programming of waking up from a low power mode by implementing the generic set_wakeup() callback of the USB PHY API. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201218120246.7759-3-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: gadget: composite: Split composite reset and disconnectWesley Cheng
Add a specific composite reset API to differentiate between disconnect and reset events. This is needed for adjusting the current draw accordingly based on the USB battery charging specification. The device is only allowed to draw the 500/900 mA (HS/SS) while in the CONFIGURED state, and only 100 mA in the connected and UNCONFIGURED state. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1609283011-21997-3-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-15Merge tag 'usb-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...
2020-12-11Merge tag 'usb-serial-5.11-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.11-rc1 Here are the USB-serial updates for 5.11-rc1, including: - keyspan_pda write-implementation fixes - digi_acceleport write-wakeup fix - mos7720 parport-restore fix - mos7720 parport-tasklet removal - cp210x termios-handling cleanups - option device-flag fix - ftdi_sio GPIO CBUS-configuration improvements - removal of in_interrupt() uses Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits) USB: serial: ftdi_sio: log the CBUS GPIO validity USB: serial: ftdi_sio: drop GPIO line checking dead code USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib USB: serial: option: add interface-number sanity check to flag handling USB: serial: cp210x: clean up dtr_rts() USB: serial: cp210x: refactor flow-control handling USB: serial: cp210x: drop flow-control debugging USB: serial: cp210x: set terminal settings on open USB: serial: cp210x: clean up line-control handling USB: serial: cp210x: return early on unchanged termios USB: serial: mos7720: defer state restore to a workqueue USB: serial: mos7720: fix parallel-port state restore USB: serial: remove write wait queue USB: serial: digi_acceleport: fix write-wakeup deadlocks USB: serial: keyspan_pda: drop redundant usb-serial pointer USB: serial: keyspan_pda: use BIT() macro USB: serial: keyspan_pda: clean up comments and whitespace USB: serial: keyspan_pda: clean up xircom/entrega support USB: serial: keyspan_pda: add write-fifo support USB: serial: keyspan_pda: increase transmitter threshold ...
2020-12-11USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAPKyle Tso
TCPM state machine needs 20-25ms to enter the ErrorRecovery state after tPSSourceOn timer timeouts. Change the timer from max 480ms to 450ms to ensure that the timer complies with the Spec. In order to keep the flexibility for other usecases using tPSSourceOn, add another timer only for PR_SWAP. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20201210160521.3417426-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09usb: typec: tcpm: Introduce vsafe0v for vbusBadhri Jagan Sridharan
TCPM at present lacks the notion of VSAFE0V. There are three vbus threshold levels that are critical to track: a. vSafe5V - VBUS “5 volts” as defined by the USB PD specification. b. vSinkDisconnect - Threshold used for transition from Attached.SNK to Unattached.SNK. c. vSafe0V - VBUS “0 volts” as defined by the USB PD specification. Tracking vSafe0V is crucial for entry into Try.SNK and Attached.SRC and turning vbus back on by the source in response to hard reset. >From "4.5.2.2.8.2 Exiting from AttachWait.SRC State" section in the Type-C spec: "The port shall transition to Attached.SRC when VBUS is at vSafe0V and the SRC.Rd state is detected on exactly one of the CC1 or CC2 pins for at least tCCDebounce." "A DRP that strongly prefers the Sink role may optionally transition to Try.SNK instead of Attached.SRC when VBUS is at vSafe0V and the SRC.Rd state is detected on exactly one of the CC1 or CC2 pins for at least tCCDebounce." >From "7.1.5 Response to Hard Resets" section in the PD spec: "After establishing the vSafe0V voltage condition on VBUS, the Source Shall wait tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V." vbus_present in the TCPM code tracks vSafe5V(vbus_present is true) and vSinkDisconnect(vbus_present is false). This change adds is_vbus_vsafe0v callback which when set makes TCPM query for vSafe0V voltage level when needed. Since not all TCPC controllers might have the capability to report vSafe0V, TCPM assumes that vSafe0V is same as vSinkDisconnect when is_vbus_vsafe0v callback is not set. This allows TCPM to continue to support controllers which don't have the support for reporting vSafe0V. Introducing vSafe0V helps fix the failure reported at "Step 15. CVS verifies PUT remains in AttachWait.SRC for 500ms" of "TD 4.7.2 Try. SNK DRP Connect DRP Test" of "Universal Serial Bus Type-C (USB Type-C) Functional Test Specification Chapters 4 and 5". Here the compliance tester intentionally maintains vbus at greater than vSafe0V and expects the Product under test to stay in AttachWait.SRC till vbus drops to vSafe0V. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20201202040840.663578-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09usb: typec: tcpm: Pass down negotiated rev to update retry countBadhri Jagan Sridharan
nRetryCount was updated from 3 to 2 between PD2.0 and PD3.0 spec. nRetryCount in "Table 6-34 Counter parameters" of the PD 2.0 spec is set to 3, whereas, nRetryCount in "Table 6-59 Counter parameters" is set to 2. Pass down negotiated rev in pd_transmit so that low level chip drivers can update the retry count accordingly before attempting packet transmission. This helps in passing "TEST.PD.PORT.ALL.02" of the "Power Delivery Merged" test suite which was initially failing with "The UUT did not retransmit the message nReryCount times" In fusb302 & tcpci drivers, by default the driver sets the retry count to 3 (Default for PD 2.0). Update this to 2, if the negotiated rev is PD 3.0. In wcove, since the retry count is intentionally set to max, leaving it as is. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20201202031733.647808-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26usb: typec: tcpm: Stay in SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS till Rp is seenBadhri Jagan Sridharan
TD.4.7.3. Try SNK DRP Connect Try.SRC DRP fails. The compliance tester mimics being a Try.SRC USB-C port. The failure is due to TCPM exiting SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS when VBUS is not present eventhough when SNK.Rp is seen. Exit to SRC_TRYWAIT from SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS only when SNK.Rp is not seen for PD_T_TRY_CC_DEBOUNCE. >From the spec: The port shall then transition to Attached.SNK when the SNK.Rp state is detected on exactly one of the CC1 or CC2 pins for at least tTryCCDebounce and VBUS is detected. Alternatively, the port shall transition to TryWait.SRC if SNK.Rp state is not detected for tTryCCDebounce. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20201125014804.1596719-1-badhri@google.com Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26usb: pd: DFP product typesHeikki Krogerus
USB Power Delivery Specification R3.0 introduced separate field for the DFP product type to the ID Header VDO. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201125120642.37156-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18usb: typec: Add plug num_altmodes sysfs attrPrashant Malani
Add a field to the typec_plug struct to record the number of available altmodes as well as the corresponding sysfs attribute to expose this to userspace. This allows userspace to determine whether there are any remaining alternate modes left to be registered by the kernel driver. It can begin executing any policy state machine after all available alternate modes have been registered with the connector class framework. This value is set to "-1" initially, signifying that a valid number of alternate modes haven't been set for the plug. The sysfs file remains hidden as long as the attribute value is -1. We re-use the partner attribute for number_of_alternate_modes since the usage and name is similar, and update the corresponding *_show() command to support both partner and plugs. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201116201150.2919178-4-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18usb: typec: tcpm: Implement enabling Auto Discharge disconnect supportBadhri Jagan Sridharan
TCPCI spec allows TCPC hardware to autonomously discharge the vbus capacitance upon disconnect. The expectation is that the TCPM enables AutoDischargeDisconnect while entering SNK/SRC_ATTACHED states. Hardware then automously discharges vbus when the vbus falls below a certain threshold i.e. VBUS_SINK_DISCONNECT_THRESHOLD. Apart from enabling the vbus discharge circuit, AutoDischargeDisconnect is also used a flag to move TCPCI based TCPC implementations into Attached.Snk/Attached.Src state as mentioned in Figure 4-15. TCPC State Diagram before a Connection of the USB Type-C Port Controller Interface Specification. In such TCPC implementations, setting AutoDischargeDisconnect would prevent TCPC into entering "Connection_Invalid" state as well. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201029063138.1429760-8-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18usb: typec: tcpm: frs sourcing vbus callbackBadhri Jagan Sridharan
During FRS hardware autonomously starts to source vbus. Provide callback to perform chip specific operations. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201029063138.1429760-5-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18usb: typec: Add number of altmodes partner attrPrashant Malani
Add a user-visible attribute for the number of alternate modes available in a partner. This allows userspace to determine whether there are any remaining alternate modes left to be registered by the kernel driver. It can begin executing any policy state machine after all available alternate modes have been registered with the connector class framework. This value is set to "-1" initially, signifying that a valid number of alternate modes haven't been set for the partner. Also add a sysfs file which exposes this attribute. The file remains hidden as long as the attribute value is -1. Cc: Benson Leung <bleung@chromium.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201116201150.2919178-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18usb: pd: Add captive Type C cable typePrashant Malani
The USB Power Delivery Specification R3.0 adds a captive cable type to the "USB Type-C plug to USB Type-C/Captive" field (Bits 19-18, Passive/Active Cable VDO, Table 6-38 & 6-39). Add the corresponding definition to the Cable VDO header. Also add a helper macro to get the Type C cable connector type, when provided the cable VDO. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201116201150.2919178-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18usb: typec: Remove one bit support for the Thunderbolt rounded/non-rounded cableUtkarsh Patel
Two bits support for the Thunderbolt rounded/non-rounded cable has been added to the header file. Hence, removing unused TBT_CABLE_ROUNDED definition from the header file. Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> -- changes in v2: - Removed the fixes tag as there is no functional implication. -- Link: https://lore.kernel.org/r/20201113202503.6559-5-utkarsh.h.patel@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18usb: typec: Correct the bit values for the Thunderbolt rounded/non-rounded ↵Utkarsh Patel
cable support Rounded and non-rounded Thunderbolt cables are represented by two bits as per USB Type-C Connector specification v2.0 section F.2.6. Corrected that in the Thunderbolt 3 cable discover mode VDO. Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> -- Changes in v2: - Removed the fixes tag as there is no functional implication. -- Link: https://lore.kernel.org/r/20201113202503.6559-2-utkarsh.h.patel@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-14usb: hcd.h: Remove RUN_CONTEXTSebastian Andrzej Siewior
The last user of RUN_CONTEXT was removed in commit 97c17beb3b668 ("[PATCH] ehci-hcd (1/2): portability (2.4), tasklet,") in the history.git repo. There are no users of RUN_CONTEXT, remove it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20201113212704.2243807-1-bigeasy@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12net: usb: switch to dev_get_tstats64 and remove usbnet_get_stats64 aliasHeiner Kallweit
Replace usbnet_get_stats64() with new identical core function dev_get_tstats64() in all users and remove usbnet_get_stats64(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12usbnet: switch to core handling of rx/tx byte/packet countersHeiner Kallweit
Use netdev->tstats instead of a member of usbnet for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-05net/usb/r8153_ecm: support ECM mode for RTL8153Hayes Wang
Support ECM mode based on cdc_ether with relative mii functions, when CONFIG_USB_RTL8152 is not set, or the device is not supported by r8152 driver. Both r8152 and r8153_ecm would check the return value of rtl8152_get_version() in porbe(). If rtl8152_get_version() return none zero value, the r8152 is used for the device with vendor mode. Otherwise, the r8153_ecm is used for the device with ECM mode. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/1394712342-15778-392-Taiwan-albertk@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04USB: serial: remove write wait queueJohan Hovold
The digi_acceleport driver is the only driver still using the port write wake queue so move it to that driver's port data. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-28usb: fix kernel-doc markupsMauro Carvalho Chehab
There is a common comment marked, instead, with kernel-doc notation. Also, some identifiers have different names between their prototypes and the kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/0b964be3884def04fcd20ea5c12cb90d0014871c.1603469755.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-16Merge tag 'docs/v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull documentation updates from Mauro Carvalho Chehab: "A series of patches addressing warnings produced by make htmldocs. This includes: - kernel-doc markup fixes - ReST fixes - Updates at the build system in order to support newer versions of the docs build toolchain (Sphinx) After this series, the number of html build warnings should reduce significantly, and building with Sphinx 3.1 or later should now be supported (although it is still recommended to use Sphinx 2.4.4). As agreed with Jon, I should be sending you a late pull request by the end of the merge window addressing remaining issues with docs build, as there are a number of warning fixes that depends on pull requests that should be happening along the merge window. The end goal is to have a clean htmldocs build on Kernel 5.10. PS. It should be noticed that Sphinx 3.0 is not currently supported, as it lacks support for C domain namespaces. Such feature, needed in order to document uAPI system calls with Sphinx 3.x, was added only on Sphinx 3.1" * tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits) PM / devfreq: remove a duplicated kernel-doc markup mm/doc: fix a literal block markup workqueue: fix a kernel-doc warning docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup Input: sparse-keymap: add a description for @sw rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu nl80211: docs: add a description for s1g_cap parameter usb: docs: document altmode register/unregister functions kunit: test.h: fix a bad kernel-doc markup drivers: core: fix kernel-doc markup for dev_err_probe() docs: bio: fix a kerneldoc markup kunit: test.h: solve kernel-doc warnings block: bio: fix a warning at the kernel-doc markups docs: powerpc: syscall64-abi.rst: fix a malformed table drivers: net: hamradio: fix document location net: appletalk: Kconfig: Fix docs location dt-bindings: fix references to files converted to yaml memblock: get rid of a :c:type leftover math64.h: kernel-docs: Convert some markups into normal comments media: uAPI: buffer.rst: remove a left-over documentation ...
2020-10-15usb: docs: document altmode register/unregister functionsMauro Carvalho Chehab
The typec_bus.rst asks for documentation of those two functions, but they don't exist: ./drivers/usb/typec/bus.c:1: warning: 'typec_altmode_unregister_driver' not found ./drivers/usb/typec/bus.c:1: warning: 'typec_altmode_register_driver' not found Also, they're not declared on bus.c but, instead, at a header file (typec_altmode.h). So, add documentation for both functions at the header and change the kernel-doc markup under typec_bus.rst to point to the right place. While here, also place the documentation for both structs declared on typec_altmode.h at the rst file. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-08usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)Badhri Jagan Sridharan
PD 3.0 spec defines a new mechanism for power role swap called Fast role swap. This change enables TCPM to support FRS when acting as sink. Once the explicit contract is negotiated, sink port is expected to query the source port for sink caps to determine whether the source is FRS capable. Bits 23 & 24 of fixed pdo of the sink caps from the source, when set, indicates the current needed by the source when fast role swap is in progress(Implicit contract phasae). 0 indicates that the source does not support Fast Role Swap. Upon receiving the FRS signal from the source, TCPC(TCPM_FRS_EVENT) informs TCPM to start the Fast role swap sequence. 1. TCPM sends FRS PD message: FR_SWAP_SEND 2. If response is not received within the expiry of SenderResponseTimer, Error recovery is triggered.: FR_SWAP_SEND_TIMEOUT 3. Upon receipt of the accept message, TCPM waits for PSSourceOffTimer for PS_READY message from the partner: FR_SWAP_SNK_SRC_NEW_SINK_READY. TCPC is expected to autonomously turn on vbus once the FRS signal is received and vbus voltage falls below vsafe5v within tSrcFrSwap. This is different from traditional power role swap where the vbus sourcing is turned on by TCPM. 4. By this time, TCPC most likely would have started to source vbus, TCPM waits for tSrcFrSwap to see if the lower level TCPC driver signals TCPM_SOURCING_VBUS event: FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED. 5. When TCPC signals sourcing vbus, TCPM sends PS_READY msg and changes the CC pin from Rd to Rp. This is the end of fast role swap sequence and TCPM initiates the sequnce to negotiate explicit contract by transitioning into SRC_STARTUP after SwapSrcStart. The code is written based on the sequence described in "Figure 8-107: Dual-role Port in Sink to Source Fast Role Swap State Diagram" of USB Power Delivery Specification Revision 3.0, Version 1.2. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-7-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-03Merge tag 'usb-for-v5.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.10 merge window Most of changes are on dwc3 (38.8%) with cdns3 falling close behind (24.1%). The biggest changes here are a series of non-critical fixes to corner cases on dwc3, produced by Thinh N, and a series of major improvements to cdns3 produced by Peter C. We also have the traditional set of new device support (Intel Keem Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch fixes on dwc3 by yours truly and a set of minor changes all over the stack. * tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits) usb: dwc2: Fix INTR OUT transfers in DDMA mode. usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs usb: dwc2: override PHY input signals with usb role switch support dt-bindings: usb: dwc2: add optional usb-role-switch property usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform dt-bindings: usb: Add Intel Keem Bay USB controller bindings usb: dwc3: gadget: Support up to max stream id usb: dwc3: gadget: Return early if no TRB update usb: dwc3: gadget: Keep TRBs in request order usb: dwc3: gadget: Revise setting IOC when no TRB left usb: dwc3: gadget: Look ahead when setting IOC usb: dwc3: gadget: Allow restarting a transfer usb: bdc: remove duplicated error message usb: dwc3: Stop active transfers before halting the controller usb: cdns3: gadget: enlarge the TRB ring length usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above usb: cdns3: gadget: need to handle sg case for workaround 2 case usb: cdns3: gadget: handle sg list use case at completion correctly usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer ...
2020-10-02usb: typec: add typec_find_pwr_opmodeAmelie Delaunay
This patch adds a function that converts power operation mode string into power operation mode value. It is useful to configure power operation mode through device tree property, as power capabilities may be linked to hardware design. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20200924090049.9041-3-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02USB: UDC: Expand device model API interfaceAlan Stern
The routines used by the UDC core to interface with the kernel's device model, namely usb_add_gadget_udc(), usb_add_gadget_udc_release(), and usb_del_gadget_udc(), provide access to only a subset of the device model's full API. They include functionality equivalent to device_register() and device_unregister() for gadgets, but they omit device_initialize(), device_add(), device_del(), get_device(), and put_device(). This patch expands the UDC API by adding usb_initialize_gadget(), usb_add_gadget(), usb_del_gadget(), usb_get_gadget(), and usb_put_gadget() to fill in the gap. It rewrites the existing routines to call the new ones. CC: Anton Vasilyev <vasilyev@ispras.ru> CC: Evgeny Novikov <novikov@ispras.ru> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-08-28usb: typec: pd: Fix formatting in pd.h headerBadhri Jagan Sridharan
Replacing spaces with tabs for PD_T_* constants. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200817183828.1895015-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-28usb: typec: tcpm: During PR_SWAP, source caps should be sent only after ↵Badhri Jagan Sridharan
tSwapSourceStart The patch addresses the compliance test failures while running TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD Compliance MOI" test plan published in https://www.usb.org/usbc. For a product to be Type-C compliant, it's expected that these tests are run on usb.org certified Type-C compliance tester as mentioned in https://www.usb.org/usbc. The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to verify the PR_SWAP response of the device. While doing so, the test asserts that Source Capabilities message is NOT received from the test device within tSwapSourceStart min (20 ms) from the time the last bit of GoodCRC corresponding to the RS_RDY message sent by the UUT was sent. If it does then the test fails. This is in line with the requirements from the USB Power Delivery Specification Revision 3.0, Version 1.2: "6.6.8.1 SwapSourceStartTimer The SwapSourceStartTimer Shall be used by the new Source, after a Power Role Swap or Fast Role Swap, to ensure that it does not send Source_Capabilities Message before the new Sink is ready to receive the Source_Capabilities Message. The new Source Shall Not send the Source_Capabilities Message earlier than tSwapSourceStart after the last bit of the EOP of GoodCRC Message sent in response to the PS_RDY Message sent by the new Source indicating that its power supply is ready." The patch makes sure that TCPM does not send the Source_Capabilities Message within tSwapSourceStart(20ms) by transitioning into SRC_STARTUP only after tSwapSourceStart(20ms). Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200817183828.1895015-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-07-29Merge tag 'usb-ci-v5.9-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: ENDIAN issue fix and one query controller role API is introduced. * tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: imx: get available runtime dr mode for wakeup setting usb: chipidea: add query_available_role interface Documentation: ABI: usb: chipidea: Update Li Jun's e-mail usb: chipidea: udc: fix the ENDIAN issue
2020-07-28Merge tag 'usb-serial-5.9-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.9-rc1 Here are the USB-serial updates for 5.9-rc1, including: - console flow-control support - simulated line-breaks on some ch341 - hardware flow-control fixes for cp210x - break-detection and sysrq fixes for ftdi_sio - sysrq optimisations - input parity checking for cp210x Included are also some new device ids and various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (31 commits) USB: serial: qcserial: add EM7305 QDL product ID USB: serial: iuu_phoenix: fix led-activity helpers USB: serial: sierra: clean up special-interface handling USB: serial: cp210x: use in-kernel types in port data USB: serial: cp210x: drop unnecessary packed attributes USB: serial: cp210x: add support for TIOCGICOUNT USB: serial: cp210x: add support for line-status events USB: serial: cp210x: disable interface on errors in open USB: serial: drop redundant transfer-buffer casts USB: serial: drop extern keyword from function declarations USB: serial: drop unnecessary sysrq include USB: serial: add sysrq break-handler dummy USB: serial: inline sysrq dummy function USB: serial: only process sysrq when enabled USB: serial: only set sysrq timestamp for consoles USB: serial: ftdi_sio: fix break and sysrq handling USB: serial: ftdi_sio: clean up receive processing USB: serial: ftdi_sio: make process-packet buffer unsigned USB: serial: use fallthrough pseudo-keyword USB: serial: ch341: fix missing simulated-break margin ...
2020-07-28usb: chipidea: add query_available_role interfacePeter Chen
The glue layer may need to know current available role to do some setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role for that. Signed-off-by: Peter Chen <peter.chen@nxp.com>
generated by cgit (git 2.34.1) at 2024-05-25 03:30:23 +0000