| Age | Commit message (Collapse) | Author |
|---|
|
This replaces all instances of ENOTSUPP with EOPNOTSUPP since ENOTSUPP
is not a standard error code. This will help maintain consistency in
error codes when new serdev API's are added.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
ocelot_xmit_get_vlan_info() calls __skb_vlan_pop() as the most
appropriate helper I could find which strips away a VLAN header.
That's all I need it to do, but __skb_vlan_pop() has more logic, which
will become incompatible with the future revert of commit 6d1ccff62780
("net: reset mac header in dev_start_xmit()").
Namely, it performs a sanity check on skb_mac_header(), which will stop
being set after the above revert, so it will return an error instead of
removing the VLAN tag.
ocelot_xmit_get_vlan_info() gets called in 2 circumstances:
(1) the port is under a VLAN-aware bridge and the bridge sends
VLAN-tagged packets
(2) the port is under a VLAN-aware bridge and somebody else (an 8021q
upper) sends VLAN-tagged packets (using a VID that isn't in the
bridge vlan tables)
In case (1), there is actually no bug to defend against, because
br_dev_xmit() calls skb_reset_mac_header() and things continue to work.
However, in case (2), illustrated using the commands below, it can be
seen that our intervention is needed, since __skb_vlan_pop() complains:
$ ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set $eth master br0 && ip link set $eth up
$ ip link add link $eth name $eth.100 type vlan id 100 && ip link set $eth.100 up
$ ip addr add 192.168.100.1/24 dev $eth.100
I could fend off the checks in __skb_vlan_pop() with some
skb_mac_header_was_set() calls, but seeing how few callers of
__skb_vlan_pop() there are from TX paths, that seems rather
unproductive.
As an alternative solution, extract the bare minimum logic to strip a
VLAN header, and move it to a new helper named vlan_remove_tag(), close
to the definition of vlan_insert_tag(). Document it appropriately and
make ocelot_xmit_get_vlan_info() call this smaller helper instead.
Seeing that it doesn't appear illegal to test skb->protocol in the TX
path, I guess it would be a good for vlan_remove_tag() to also absorb
the vlan_set_encap_proto() function call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preparatory change for the deletion of skb_reset_mac_header(skb)
from __dev_queue_xmit(). After that deletion, skb_mac_header(skb) will
no longer be set in TX paths, from which __vlan_insert_inner_tag() can
still be called (perhaps indirectly).
If we don't make this change, then an unset MAC header (equal to ~0U)
will become set after the adjustment with VLAN_HLEN.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We use napi_threaded_poll() in order to reduce our softirq dependency.
We can add a followup of 821eba962d95 ("net: optimize napi_schedule_rps()")
to further remove the need of firing NET_RX_SOFTIRQ whenever
RPS/RFS are used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-20
1) Dragos Improves RX page pool, and provides some fixes to his previous
series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
* tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Update op_mode to op_mod for port selection
net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()
net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()
net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()
net/mlx5e: RX, Hook NAPIs to page pools
net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case
net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ
net/mlx5e: Add vnic devlink health reporter to representors
net/mlx5: Add vnic devlink health reporter to PFs/VFs
Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"
Revert "net/mlx5: Expose steering dropped packets counter"
net/mlx5: DR, Add memory statistics for domain object
net/mlx5: DR, Add more info in domain dbg dump
net/mlx5: DR, Calculate sync threshold of each pool according to its type
net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump
====================
Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-21
We've added 71 non-merge commits during the last 8 day(s) which contain
a total of 116 files changed, 13397 insertions(+), 8896 deletions(-).
The main changes are:
1) Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward,
from Florian Westphal.
2) Fix race between btf_put and btf_idr walk which caused a deadlock,
from Alexei Starovoitov.
3) Second big batch to migrate test_verifier unit tests into test_progs
for ease of readability and debugging, from Eduard Zingerman.
4) Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree, from Dave Marchevsky.
5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF
selftests into libbpf-provided bpf_helpers.h header and improve
kfunc handling, from Andrii Nakryiko.
6) Support 64-bit pointers to kfuncs needed for archs like s390x,
from Ilya Leoshkevich.
7) Support BPF progs under getsockopt with a NULL optval,
from Stanislav Fomichev.
8) Improve verifier u32 scalar equality checking in order to enable
LLVM transformations which earlier had to be disabled specifically
for BPF backend, from Yonghong Song.
9) Extend bpftool's struct_ops object loading to support links,
from Kui-Feng Lee.
10) Add xsk selftest follow-up fixes for hugepage allocated umem,
from Magnus Karlsson.
11) Support BPF redirects from tc BPF to ifb devices,
from Daniel Borkmann.
12) Add BPF support for integer type when accessing variable length
arrays, from Feng Zhou.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits)
selftests/bpf: verifier/value_ptr_arith converted to inline assembly
selftests/bpf: verifier/value_illegal_alu converted to inline assembly
selftests/bpf: verifier/unpriv converted to inline assembly
selftests/bpf: verifier/subreg converted to inline assembly
selftests/bpf: verifier/spin_lock converted to inline assembly
selftests/bpf: verifier/sock converted to inline assembly
selftests/bpf: verifier/search_pruning converted to inline assembly
selftests/bpf: verifier/runtime_jit converted to inline assembly
selftests/bpf: verifier/regalloc converted to inline assembly
selftests/bpf: verifier/ref_tracking converted to inline assembly
selftests/bpf: verifier/map_ptr_mixing converted to inline assembly
selftests/bpf: verifier/map_in_map converted to inline assembly
selftests/bpf: verifier/lwt converted to inline assembly
selftests/bpf: verifier/loops1 converted to inline assembly
selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly
selftests/bpf: verifier/direct_packet_access converted to inline assembly
selftests/bpf: verifier/d_path converted to inline assembly
selftests/bpf: verifier/ctx converted to inline assembly
selftests/bpf: verifier/btf_ctx_access converted to inline assembly
selftests/bpf: verifier/bpf_get_stack converted to inline assembly
...
====================
Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
add glue code so a bpf program can be run using userspace-provided
netfilter state and packet/skb.
Default is to use ipv4:output hook point, but this can be overridden by
userspace. Userspace provided netfilter state is restricted, only hook and
protocol families can be overridden and only to ipv4/ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs
that will be invoked via the NF_HOOK() points in the ip stack.
Invocation incurs an indirect call. This is not a necessity: Its
possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the
program invocation with the same method already done for xdp progs.
This isn't done here to keep the size of this chunk down.
Verifier restricts verdicts to either DROP or ACCEPT.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add bpf_link support skeleton. To keep this reviewable, no bpf program
can be invoked yet, if a program is attached only a c-stub is called and
not the actual bpf program.
Defaults to 'y' if both netfilter and bpf syscall are enabled in kconfig.
Uapi example usage:
union bpf_attr attr = { };
attr.link_create.prog_fd = progfd;
attr.link_create.attach_type = 0; /* unused */
attr.link_create.netfilter.pf = PF_INET;
attr.link_create.netfilter.hooknum = NF_INET_LOCAL_IN;
attr.link_create.netfilter.priority = -128;
err = bpf(BPF_LINK_CREATE, &attr, sizeof(attr));
... this would attach progfd to ipv4:input hook.
Such hook gets removed automatically if the calling program exits.
BPF_NETFILTER program invocation is added in followup change.
NF_HOOK_OP_BPF enum will eventually be read from nfnetlink_hook, it
allows to tell userspace which program is attached at the given hook
when user runs 'nft hook list' command rather than just the priority
and not-very-helpful 'this hook runs a bpf prog but I can't tell which
one'.
Will also be used to disallow registration of two bpf programs with
same priority in a followup patch.
v4: arm32 cmpxchg only supports 32bit operand
s/prio/priority/
v3: restrict prog attachment to ip/ip6 for now, lets lift restrictions if
more use cases pop up (arptables, ebtables, netdev ingress/egress etc).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-2-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.4
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
- fix some Fine Time Measurement (FTM) frames not being bufferable
- flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
- preparation for Wi-Fi 7 EHT and multi-link support
rtw88
- SDIO bus support
- RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
- framework firmware backwards compatibility
brcmfmac
- Cypress 43439 SDIO support
mt76
- mt7921 P2P support
- mt7996 mesh A-MSDU support
- mt7996 EHT support
- mt7996 coredump support
wcn36xx
- support for pronto v3 hardware
ath11k
- PCIe DeviceTree bindings
- WCN6750: enable SAR support
ath10k
- convert DeviceTree bindings to YAML
* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
wifi: rtw88: Update spelling in main.h
wifi: airo: remove ISA_DMA_API dependency
wifi: rtl8xxxu: Simplify setting the initial gain
wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
wifi: rtl8xxxu: Don't print the vendor/product/serial
wifi: rtw88: Fix memory leak in rtw88_usb
wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
wifi: rtw88: rtw8821c: Fix rfe_option field width
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: 8822c: add iface combination
wifi: rtw88: handle station mode concurrent scan with AP mode
wifi: rtw88: prevent scan abort with other VIFs
wifi: rtw88: refine reserved page flow for AP mode
wifi: rtw88: disallow PS during AP mode
wifi: rtw88: 8822c: extend reserved page number
wifi: rtw88: add port switch for AP mode
wifi: rtw88: add bitmap for dynamic port settings
wifi: rtw89: mac: use regular int as return type of DLE buffer request
wifi: mac80211: remove return value check of debugfs_create_dir()
...
====================
Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the Core device gets an event from the device, or notices
the device FW to be up or down, it needs to send those events
on to the clients that have an event handler. Add the code to
pass along the events to the clients.
The entry points pdsc_register_notify() and pdsc_unregister_notify()
are EXPORTed for other drivers that want to listen for these events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the client API operations for running adminq commands.
The core registers the client with the FW, then the client
has a context for requesting adminq services. We expect
to add additional operations for other clients, including
requesting additional private adminqs and IRQs, but don't have
the need yet.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An auxiliary_bus device is created for each vDPA type VF at VF
probe and destroyed at VF remove. The aux device name comes
from the driver name + VIF type + the unique id assigned at PCI
probe. The VFs are always removed on PF remove, so there should
be no issues with VFs trying to access missing PF structures.
The auxiliary_device names will look like "pds_core.vDPA.nn"
where 'nn' is the VF's uid.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Virtual Interfaces (VIFs) supported by the DSC's
configuration (vDPA, Eth, RDMA, etc) are reported in the
dev_ident struct and made visible in debugfs. At this point
only vDPA is supported in this driver so we only setup
devices for that feature.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the service routines for submitting and processing
the adminq messages and for handling notifyq events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set up the basic adminq and notifyq queue structures. These are
used mostly by the client drivers for feature configuration.
These are essentially the same adminq and notifyq as in the
ionic driver.
Part of this includes querying for device identity and FW
information, so we can make that available to devlink dev info.
$ devlink dev info pci/0000:b5:00.0
pci/0000:b5:00.0:
driver pds_core
serial_number FLM18420073
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw 1.51.0-73
stored:
fw.goldfw 1.15.9-C-22
fw.mainfwa 1.60.0-73
fw.mainfwb 1.60.0-57
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devcmd interface is the basic connection to the device through the
PCI BAR for low level identification and command services. This does
the early device initialization and finds the identity data, and adds
devcmd routines to be used by later driver bits.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the initial PCI driver framework for the new pds_core device
driver and its family of devices. This does the very basics of
registering for the new PF PCI device 1dd8:100c, setting up debugfs
entries, and registering with devlink.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two internal flags that will be used to enable / disable per-{Port,
VLAN} neighbor suppression:
1. 'BR_NEIGH_VLAN_SUPPRESS': A per-port flag used to indicate that
per-{Port, VLAN} neighbor suppression is enabled on the bridge port.
When set, 'BR_NEIGH_SUPPRESS' has no effect.
2. 'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED': A per-VLAN flag used to indicate
that neighbor suppression is enabled on the given VLAN.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array payload[] from the structure
sctp_datahdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/socket.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:230:29: warning: nested flexible array
This member is not even used anywhere.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array hmac[] from the structure
sctp_authhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/auth.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:735:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array variable[] from the structure
sctp_sackhdr and sctp_errhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/sm_statefuns.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:451:28: warning: nested flexible array
./include/linux/sctp.h:393:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array skip[] from the structure
sctp_ifwdtsn/fwdtsn_hdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/stream_interleave.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:611:32: warning: nested flexible array
./include/linux/sctp.h:628:33: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch deletes the flexible-array params[] from the structure
sctp_inithdr, sctp_addiphdr and sctp_reconf_chunk to avoid some
sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/input.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:278:29: warning: nested flexible array
./include/linux/sctp.h:675:30: warning: nested flexible array
This warning is reported if a structure having a flexible array
member is included by other structures.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will, after the next patch, hold only the core
drop reasons and minimal infrastructure. Fix a small
kernel-doc issue while at it, to avoid the move
triggering a checker.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__kfree_skb_defer() uses the old naming where "defer" meant
slab bulk free/alloc APIs. In the meantime we also made
__kfree_skb_defer() feed the per-NAPI skb cache, which
implies bulk APIs. So take away the 'defer' and add 'napi'.
While at it add a drop reason. This only matters on the
tx_action path, if the skb has a frag_list. But getting
rid of a SKB_DROP_REASON_NOT_SPECIFIED seems like a net
benefit so why not.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230420020005.815854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be consistent with the other enum keys use OP_MOD
instead of OP_MODE.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Create a vnic devlink health reporter for PFs/VFs interfaces.
The reporter's diagnose callback displays the values of vNIC/vport
transport debug counters of PFs/VFs, as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Moreover, add documentation on the reporter functionality and the
counters description.
While at it, expose the vNIC counters diagnose function to be used by
the downstream patch, which will reveal the counters for representor
interfaces.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Adjacent changes:
net/mptcp/protocol.h
63740448a32e ("mptcp: fix accept vs worker race")
2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
|
|
This reverts commit fe998a3c77b9f989a30a2a01fb00d3729a6d53a4.
Paul reports that it causes a regression with IB on CX4
and FW 12.18.1000. In addition I think that the concept
of "management PF" is not fully accepted and requires
a discussion.
Fixes: fe998a3c77b9 ("net/mlx5: Enable management PF initialization")
Reported-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/all/CAHC9VhQ7A4+msL38WpbOMYjAqLp0EtOjeLh4Dc6SQtD6OUvCQg@mail.gmail.com/
Link: https://lore.kernel.org/r/20230413222547.56901-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes.
19 are cc:stable and the remainder address issues which were
introduced during this merge cycle, or aren't considered suitable for
-stable backporting.
19 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
nilfs2: initialize unused bytes in segment summary blocks
mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pages
mm/mmap: regression fix for unmapped_area{_topdown}
maple_tree: fix mas_empty_area() search
maple_tree: make maple state reusable after mas_empty_area_rev()
mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()
mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()
tools/Makefile: do missed s/vm/mm/
mm: fix memory leak on mm_init error handling
mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock
kernel/sys.c: fix and improve control flow in __sys_setres[ug]id()
Revert "userfaultfd: don't fail on unrecognized features"
writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbs
maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug
tools/mm/page_owner_sort.c: fix TGID output when cull=tg is used
mailmap: update jtoppins' entry to reference correct email
mm/mempolicy: fix use-after-free of VMA iterator
mm/huge_memory.c: warn with pr_warn_ratelimited instead of VM_WARN_ON_ONCE_FOLIO
mm/mprotect: fix do_mprotect_pkey() return on error
mm/khugepaged: check again on anon uffd-wp during isolation
...
|
|
Accesses to nf_trace and ipvs_property are already wrapped
by ifdefs where necessary. Don't allocate the bits for those
fields at all if possible.
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nf_trace is a debug feature, AFAIU, and yet it sits oddly
high in the sk_buff bitfield. Move it down, pushing up
dst_pending_confirm and inner_protocol_type.
Next change will make nf_trace optional (under Kconfig)
and all optional fields should be placed after 2b fields
to avoid 2b fields straddling bytes.
dst_pending_confirm is L3, so it makes sense next to ignore_df.
inner_protocol_type goes up just to keep the balance.
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
alloc_cpu is currently between 4 byte fields, so it's almost
guaranteed to create a 2B hole. It has a knock on effect of
creating a 4B hole after @end (and @end and @tail being in
different cachelines).
None of this matters hugely, but for kernel configs which
don't enable all the features there may well be a 2B hole
after the bitfield. Move alloc_cpu there.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SCTP is not universally deployed, allow hiding its bit
from the skb.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Datacenter kernel builds will very likely not include WIRELESS,
so let them shave 2 bits off the skb by hiding the wifi fields.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux LEDs can be requested to perform hardware accelerated
blinking. Pass this to the PHY driver, if it implements the op.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux LEDs can be software controlled via the brightness file in /sys.
LED drivers need to implement a brightness_set function which the core
will call. Implement an intermediary in phy_device, which will call
into the phy driver if it implements the necessary function.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define common binding parsing for all PHY drivers with LEDs using
phylib. Parse the DT as part of the phy_probe and add LEDs to the
linux LED class infrastructure. For the moment, provide a dummy
brightness function, which will later be replaced with a call into the
PHY driver. This allows testing since the LED core might otherwise
reject an LED whose brightness cannot be set.
Add a dependency on LED_CLASS. It either needs to be built in, or not
enabled, since a modular build can result in linker errors.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide stubs for devm_led_classdev_register_ext() and
led_init_default_state_get() so that LED drivers embedded within other
drivers such as PHYs and Ethernet switches still build when LEDS_CLASS
or NEW_LEDS are disabled. This also helps with Kconfig dependencies,
which are somewhat hairy for phylib and mdio and only get worse when
adding a dependency on LED_CLASS.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, bonding only obtain the timestamp (ts) information of
the active slave, which is available only for modes 1, 5, and 6.
For other modes, bonding only has software rx timestamping support.
However, some users who use modes such as LACP also want tx timestamp
support. To address this issue, let's check the ts information of each
slave. If all slaves support tx timestamping, we can enable tx
timestamping support for the bond.
Add a note that the get_ts_info may be called with RCU, or rtnl or
reference on the device in ethtool.h>
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230418034841.2566262-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Unbreak br_netfilter physdev match support, from Florian Westphal.
2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian.
3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal.
4) Fix validation of catch-all set element.
5) Tighten requirements for catch-all set elements.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
netfilter: nf_tables: validate catch-all set elements
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT
netfilter: br_netfilter: fix recent physdev match breakage
====================
Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range()
must also properly handle allocation/mapping failures. In the case of
such, it must clean up the already created metadata mappings and return an
error code, so that the error can be propagated to ioremap_page_range().
Without doing so, KMSAN may silently fail to bring the metadata for the
page range into a consistent state, which will result in user-visible
crashes when trying to access them.
Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As reported by Dipanjan Das, when KMSAN is used together with kernel fault
injection (or, generally, even without the latter), calls to kcalloc() or
__vmap_pages_range_noflush() may fail, leaving the metadata mappings for
the virtual mapping in an inconsistent state. When these metadata
mappings are accessed later, the kernel crashes.
To address the problem, we return a non-zero error code from
kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping
failure inside it, and make vmap_pages_range_noflush() return an error if
KMSAN fails to allocate the metadata.
This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(),
as these allocation failures are not fatal anymore.
Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend packet reformat types and flow table capabilities with
IPsec packet offload tunnel bits.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some use-cases where it is desirable to use bpf_redirect()
in combination with ifb device, which currently is not supported, for
example, around filtering inbound traffic with BPF to then push it to
ifb which holds the qdisc for shaping in contrast to doing that on the
egress device.
Toke mentions the following case related to OpenWrt:
Because there's not always a single egress on the other side. These are
mainly home routers, which tend to have one or more WiFi devices bridged
to one or more ethernet ports on the LAN side, and a single upstream WAN
port. And the objective is to control the total amount of traffic going
over the WAN link (in both directions), to deal with bufferbloat in the
ISP network (which is sadly still all too prevalent).
In this setup, the traffic can be split arbitrarily between the links
on the LAN side, and the only "single bottleneck" is the WAN link. So we
install both egress and ingress shapers on this, configured to something
like 95-98% of the true link bandwidth, thus moving the queues into the
qdisc layer in the router. It's usually necessary to set the ingress
bandwidth shaper a bit lower than the egress due to being "downstream"
of the bottleneck link, but it does work surprisingly well.
We usually use something like a matchall filter to put all ingress
traffic on the ifb, so doing the redirect from BPF has not been an
immediate requirement thus far. However, it does seem a bit odd that
this is not possible, and we do have a BPF-based filter that layers on
top of this kind of setup, which currently uses u32 as the ingress
filter and so it could presumably be improved to use BPF instead if
that was available.
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://git.openwrt.org/?p=project/qosify.git;a=blob;f=README
Link: https://lore.kernel.org/bpf/875y9yzbuy.fsf@toke.dk
Link: https://lore.kernel.org/r/8cebc8b2b6e967e10cbafe2ffd6795050e74accd.1681739137.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
nftables can be built as a module, so fix the preprocessor conditional
accordingly.
Fixes: 478b360a47b7 ("netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We've managed to improve the UX for kptrs significantly over the last 9
months. All of the existing use cases which previously had KF_KPTR_GET
kfuncs (struct bpf_cpumask *, struct task_struct *, and struct cgroup *)
have all been updated to be synchronized using RCU. In other words,
their KF_KPTR_GET kfuncs have been removed in favor of KF_RCU |
KF_ACQUIRE kfuncs, with the pointers themselves also being readable from
maps in an RCU read region thanks to the types being RCU safe.
While KF_KPTR_GET was a logical starting point for kptrs, it's become
clear that they're not the correct abstraction. KF_KPTR_GET is a flag
that essentially does nothing other than enforcing that the argument to
a function is a pointer to a referenced kptr map value. At first glance,
that's a useful thing to guarantee to a kfunc. It gives kfuncs the
ability to try and acquire a reference on that kptr without requiring
the BPF prog to do something like this:
struct kptr_type *in_map, *new = NULL;
in_map = bpf_kptr_xchg(&map->value, NULL);
if (in_map) {
new = bpf_kptr_type_acquire(in_map);
in_map = bpf_kptr_xchg(&map->value, in_map);
if (in_map)
bpf_kptr_type_release(in_map);
}
That's clearly a pretty ugly (and racy) UX, and if using KF_KPTR_GET is
the only alternative, it's better than nothing. However, the problem
with any KF_KPTR_GET kfunc lies in the fact that it always requires some
kind of synchronization in order to safely do an opportunistic acquire
of the kptr in the map. This is because a BPF program running on another
CPU could do a bpf_kptr_xchg() on that map value, and free the kptr
after it's been read by the KF_KPTR_GET kfunc. For example, the
now-removed bpf_task_kptr_get() kfunc did the following:
struct task_struct *bpf_task_kptr_get(struct task_struct **pp)
{
struct task_struct *p;
rcu_read_lock();
p = READ_ONCE(*pp);
/* If p is non-NULL, it could still be freed by another CPU,
* so we have to do an opportunistic refcount_inc_not_zero()
* and return NULL if the task will be freed after the
* current RCU read region.
*/
|f (p && !refcount_inc_not_zero(&p->rcu_users))
p = NULL;
rcu_read_unlock();
return p;
}
In other words, the kfunc uses RCU to ensure that the task remains valid
after it's been peeked from the map. However, this is completely
redundant with just defining a KF_RCU kfunc that itself does a
refcount_inc_not_zero(), which is exactly what bpf_task_acquire() now
does.
So, the question of whether KF_KPTR_GET is useful is actually, "Are
there any synchronization mechanisms / safety flags that are required by
certain kptrs, but which are not provided by the verifier to kfuncs?"
The answer to that question today is "No", because every kptr we
currently care about is RCU protected.
Even if the answer ever became "yes", the proper way to support that
referenced kptr type would be to add support for whatever
synchronization mechanism it requires in the verifier, rather than
giving kfuncs a flag that says, "Here's a pointer to a referenced kptr
in a map, do whatever you need to do."
With all that said -- so as to allow us to consolidate the kfunc API,
and simplify the verifier a bit, this patch removes KF_KPTR_GET, and all
relevant logic from the verifier.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230416084928.326135-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
