| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and
NR_FWNODE_REFERENCE_ARGS and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref
count error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups
(i.e. common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali
Bifrost GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation
warnings
- Drop some obsolete parts of Xilinx bindings"
* tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (48 commits)
scripts/make_fit: Print DT name before libfdt errors
dt-bindings: edac: altera: socfpga: Convert to YAML
dt-bindings: pps: gpio: Correct indentation and style in DTS example
media: dt-bindings: mediatek,vcodec-encoder: Drop assigned-clock properties
of: address: Allow to specify nonposted-mmio per-device
of: address: Expand nonposted-mmio to non-Apple Silicon platforms
docs: dt-bindings: Specify ordering for properties within groups
dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
of: Move of_prop_val_eq() next to the single user
of/platform: Use typed accessors rather than of_get_property()
dt-bindings: trivial-devices: Add Maxim max15301, max15303, and max20751
dt-bindings: fsi: ibm,p9-scom: Add "ibm,fsi2pib" compatible
dt-bindings: memory-controllers: qcom,ebi2: Enforce child props
dt-bindings: memory-controllers: samsung,exynos4210-srom: Enforce child props
dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format
docs: process: maintainer-soc-clean-dts: linux-next is decisive
docs: dt: submitting-patches: Document sending DTS patches
of: Align macro MAX_PHANDLE_ARGS with NR_FWNODE_REFERENCE_ARGS
...
|
|
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl subsystem from Jason Gunthorpe:
"fwctl is a new subsystem intended to bring some common rules and order
to the growing pattern of exposing a secure FW interface directly to
userspace.
Unlike existing places like RDMA/DRM/VFIO/uacce that are exposing a
device for datapath operations fwctl is focused on debugging,
configuration and provisioning of the device. It will not have the
necessary features like interrupt delivery to support a datapath.
This concept is similar to the long standing practice in the "HW" RAID
space of having a device specific misc device to manage the RAID
controller FW. fwctl generalizes this notion of a companion debug and
management interface that goes along with a dataplane implemented in
an appropriate subsystem.
There have been three LWN articles written discussing various aspects
of this:
https://lwn.net/Articles/955001/
https://lwn.net/Articles/969383/
https://lwn.net/Articles/990802/
This includes three drivers to launch the subsystem:
- CXL provides a vendor scheme for executing commands and a way to
learn the 'command effects' (ie the security properties) of such
commands. The fwctl driver allows access to these mechanism within
the fwctl security model
- mlx5 is family of networking products, the driver supports all
current Mellanox HW still receiving FW feature updates. This
includes RDMA multiprotocol NICs like ConnectX and the Bluefield
family of Smart NICs.
- AMD/Pensando Distributed Services card is a multi protocol Smart
NIC with a multi PCI function design. fwctl works on the management
PCI function following a 'command effects' model similar to CXL"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (30 commits)
pds_fwctl: add Documentation entries
pds_fwctl: add rpc and query support
pds_fwctl: initial driver framework
pds_core: add new fwctl auxiliary_device
pds_core: specify auxiliary_device to be created
pds_core: make pdsc_auxbus_dev_del() void
cxl: Fixup kdoc issues for include/cxl/features.h
fwctl/cxl: Add documentation to FWCTL CXL
cxl/test: Add Set Feature support to cxl_test
cxl/test: Add Get Feature support to cxl_test
cxl: Add support to handle user feature commands for set feature
cxl: Add support to handle user feature commands for get feature
cxl: Add support for fwctl RPC command to enable CXL feature commands
cxl: Move cxl feature command structs to user header
cxl: Add FWCTL support to CXL
mlx5: Create an auxiliary device for fwctl_mlx5
fwctl/mlx5: Support for communicating with mlx5 fw
fwctl: Add documentation
fwctl: FWCTL_RPC to execute a Remote Procedure Call to device firmware
taint: Add TAINT_FWCTL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove legacy compression interface
- Improve scatterwalk API
- Add request chaining to ahash and acomp
- Add virtual address support to ahash and acomp
- Add folio support to acomp
- Remove NULL dst support from acomp
Algorithms:
- Library options are fuly hidden (selected by kernel users only)
- Add Kerberos5 algorithms
- Add VAES-based ctr(aes) on x86
- Ensure LZO respects output buffer length on compression
- Remove obsolete SIMD fallback code path from arm/ghash-ce
Drivers:
- Add support for PCI device 0x1134 in ccp
- Add support for rk3588's standalone TRNG in rockchip
- Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93
- Fix bugs in tegra uncovered by multi-threaded self-test
- Fix corner cases in hisilicon/sec2
Others:
- Add SG_MITER_LOCAL to sg miter
- Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp"
* tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits)
crypto: testmgr - Add multibuffer acomp testing
crypto: acomp - Fix synchronous acomp chaining fallback
crypto: testmgr - Add multibuffer hash testing
crypto: hash - Fix synchronous ahash chaining fallback
crypto: arm/ghash-ce - Remove SIMD fallback code path
crypto: essiv - Replace memcpy() + NUL-termination with strscpy()
crypto: api - Call crypto_alg_put in crypto_unregister_alg
crypto: scompress - Fix incorrect stream freeing
crypto: lib/chacha - remove unused arch-specific init support
crypto: remove obsolete 'comp' compression API
crypto: compress_null - drop obsolete 'comp' implementation
crypto: cavium/zip - drop obsolete 'comp' implementation
crypto: zstd - drop obsolete 'comp' implementation
crypto: lzo - drop obsolete 'comp' implementation
crypto: lzo-rle - drop obsolete 'comp' implementation
crypto: lz4hc - drop obsolete 'comp' implementation
crypto: lz4 - drop obsolete 'comp' implementation
crypto: deflate - drop obsolete 'comp' implementation
crypto: 842 - drop obsolete 'comp' implementation
crypto: nx - Migrate to scomp API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
|
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
|
|
Pull more io_uring updates from Jens Axboe:
"Final separate updates for io_uring.
This started out as a series of cleanups improvements and improvements
for registered buffers, but as the last series of the io_uring changes
for 6.15, it also collected a few fixes for the other branches on top:
- Add support for vectored fixed/registered buffers.
Previously only single segments have been supported for commands,
now vectored variants are supported as well. This series includes
networking and file read/write support.
- Small series unifying return codes across multi and single shot.
- Small series cleaning up registerd buffer importing.
- Adding support for vectored registered buffers for uring_cmd.
- Fix for io-wq handling of command reissue.
- Various little fixes and tweaks"
* tag 'for-6.15/io_uring-reg-vec-20250327' of git://git.kernel.dk/linux: (25 commits)
io_uring/net: fix io_req_post_cqe abuse by send bundle
io_uring/net: use REQ_F_IMPORT_BUFFER for send_zc
io_uring: move min_events sanitisation
io_uring: rename "min" arg in io_iopoll_check()
io_uring: open code __io_post_aux_cqe()
io_uring: defer iowq cqe overflow via task_work
io_uring: fix retry handling off iowq
io_uring/net: only import send_zc buffer once
io_uring/cmd: introduce io_uring_cmd_import_fixed_vec
io_uring/cmd: add iovec cache for commands
io_uring/cmd: don't expose entire cmd async data
io_uring: rename the data cmd cache
io_uring: rely on io_prep_reg_vec for iovec placement
io_uring: introduce io_prep_reg_iovec()
io_uring: unify STOP_MULTISHOT with IOU_OK
io_uring: return -EAGAIN to continue multishot
io_uring: cap cached iovec/bvec size
io_uring/net: implement vectored reg bufs for zctx
io_uring/net: convert to struct iou_vec
io_uring/net: pull vec alloc out of msghdr import
...
|
|
Problem: The set environment variable logic uses a static "heap" like
buffer to store the values of the variables, and they are never freed,
on top of that this is redundant since the kernel supplies allocation
facilities which are even used also in this file.
Solution: Remove the weird static buffer logic and use kmalloc instead,
call kfree when overriding an existing variable.
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250204054741.GB1219827@lichtman.org
Signed-off-by: Daniel Thompson <daniel@riscstar.com>
|
|
Pull io_uring zero-copy receive support from Jens Axboe:
"This adds support for zero-copy receive with io_uring, enabling fast
bulk receive of data directly into application memory, rather than
needing to copy the data out of kernel memory.
While this version only supports host memory as that was the initial
target, other memory types are planned as well, with notably GPU
memory coming next.
This work depends on some networking components which were queued up
on the networking side, but have now landed in your tree.
This is the work of Pavel Begunkov and David Wei. From the v14 posting:
'We configure a page pool that a driver uses to fill a hw rx queue
to hand out user pages instead of kernel pages. Any data that ends
up hitting this hw rx queue will thus be dma'd into userspace
memory directly, without needing to be bounced through kernel
memory. 'Reading' data out of a socket instead becomes a
_notification_ mechanism, where the kernel tells userspace where
the data is. The overall approach is similar to the devmem TCP
proposal
This relies on hw header/data split, flow steering and RSS to
ensure packet headers remain in kernel memory and only desired
flows hit a hw rx queue configured for zero copy. Configuring this
is outside of the scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is
that io_uring is used for the uAPI and the lifetime of all objects
are bound to an io_uring instance. Data is 'read' using a new
io_uring request type. When done, data is returned via a new shared
refill queue. A zero copy page pool refills a hw rx queue from this
refill queue directly. Of course, the lifetime of these data
buffers are managed by io_uring rather than the networking stack,
with different refcounting rules.
This patchset is the first step adding basic zero copy support. We
will extend this iteratively with new features e.g. dynamically
allocated zero copy areas, THP support, dmabuf support, improved
copy fallback, general optimisations and more'
In a local setup, I was able to saturate a 200G link with a single CPU
core, and at netdev conf 0x19 earlier this month, Jamal reported
188Gbit of bandwidth using a single core (no HT, including soft-irq).
Safe to say the efficiency is there, as bigger links would be needed
to find the per-core limit, and it's considerably more efficient and
faster than the existing devmem solution"
* tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux:
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This contains a new driver: a TPM FF-A driver.
FF comes from Firmware Framework, and A comes from Arm's A-profile.
FF-A is essentially a standard mechanism to communicate with TrustZone
apps such as TPM.
Other than that, this includes a pile of fixes and small improvments"
* tag 'tpmdd-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Make chip->{status,cancel,req_canceled} opt
MAINTAINERS: TPM DEVICE DRIVER: add missing includes
tpm: End any active auth session before shutdown
Documentation: tpm: Add documentation for the CRB FF-A interface
tpm_crb: Add support for the ARM FF-A start method
ACPICA: Add start method for ARM FF-A
tpm_crb: Clean-up and refactor check for idle support
tpm_crb: ffa_tpm: Implement driver compliant to CRB over FF-A
tpm/tpm_ftpm_tee: fix struct ftpm_tee_private documentation
tpm, tpm_tis: Workaround failed command reception on Infineon devices
tpm, tpm_tis: Fix timeout handling when waiting for TPM status
tpm: Convert warn to dbg in tpm2_start_auth_session()
tpm: Lazily flush auth session when getting random data
tpm: ftpm_tee: remove incorrect of_match_ptr annotation
tpm: do not start chip while suspended
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings two main changes to Landlock:
- A signal scoping fix with a new interface for user space to know if
it is compatible with the running kernel.
- Audit support to give visibility on why access requests are denied,
including the origin of the security policy, missing access rights,
and description of object(s). This was designed to limit log spam
as much as possible while still alerting about unexpected blocked
access.
With these changes come new and improved documentation, and a lot of
new tests"
* tag 'landlock-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (36 commits)
landlock: Add audit documentation
selftests/landlock: Add audit tests for network
selftests/landlock: Add audit tests for filesystem
selftests/landlock: Add audit tests for abstract UNIX socket scoping
selftests/landlock: Add audit tests for ptrace
selftests/landlock: Test audit with restrict flags
selftests/landlock: Add tests for audit flags and domain IDs
selftests/landlock: Extend tests for landlock_restrict_self(2)'s flags
selftests/landlock: Add test for invalid ruleset file descriptor
samples/landlock: Enable users to log sandbox denials
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_*_EXEC_* flags
landlock: Log scoped denials
landlock: Log TCP bind and connect denials
landlock: Log truncate and IOCTL denials
landlock: Factor out IOCTL hooks
landlock: Log file-related denials
landlock: Log mount-related denials
landlock: Add AUDIT_LANDLOCK_DOMAIN and log domain status
landlock: Add AUDIT_LANDLOCK_ACCESS and log ptrace denials
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities update from Serge Hallyn:
"This contains just one patch that removes a helper function whose last
user (smack) stopped using it in 2018"
* tag 'caps-pr-20250327' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
capability: Remove unused has_capability
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"
This reverts commit 36f5f026df6c1cd8a20373adc4388d2b3401ce91, reversing
changes made to 43a7eec035a5b64546c8adefdc9cf96a116da14b.
Thomas says:
"I just noticed that for some incomprehensible reason, probably sheer
incompetemce when trying to utilize b4, I managed to merge an outdated
_and_ buggy version of that series.
Can you please revert that merge completely?"
Done.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PASID usage requires PASID support in both device and IOMMU. Since the
iommu drivers always enable the PASID capability for the device if it
is supported, this extends the IOMMU_GET_HW_INFO to report the PASID
capability to userspace. Also, enhances the selftest accordingly.
Link: https://patch.msgid.link/r/20250321180143.8468-5-yi.l.liu@intel.com
Cc: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org> #aarch64 platform
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add reserve_mem_release_by_name() to release a reserved memory region
with a given name. This allows us to release reserved memory which is
defined by kernel cmdline, after boot.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/173989133862.230693.14094993331347437600.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The tracing system needs a way to save all the currently loaded modules
and their addresses into persistent memory so that it can evaluate the
addresses on a reboot from a crash. When the persistent memory trace
starts, it will load the module addresses and names into the persistent
memory. To do so, it will call the module_for_each_mod() function and pass
it a function and data structure to get called on each loaded module. Then
it can record the memory.
This only implements that function.
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: linux-modules@vger.kernel.org
Link: https://lore.kernel.org/20250305164608.962615966@goodmis.org
Acked-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There's no reason to save the KASLR offset for the ring buffer itself.
That is used by the tracer. Now that the tracer has a way to save data in
the persistent memory of the ring buffer, have the tracing infrastructure
take care of the saving of the KASLR offset.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.792722274@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that there's one meta data at the start of the persistent memory used by
the ring buffer, allow the caller to request some memory right after that
data that it can use as its own persistent memory.
Also fix some white space issues with ring_buffer_alloc().
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.619631731@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Instead of saving off the text and data pointers and using them to compare
with the current boot's text and data pointers, just save off the KASLR
offset. Then that can be used to figure out how to read the previous boots
buffer.
The last_boot_info will now show this offset, but only if it is for a
previous boot:
~# cat instances/boot_mapped/last_boot_info
39000000 [kernel]
~# echo function > instances/boot_mapped/current_tracer
~# cat instances/boot_mapped/last_boot_info
# Current
If the KASLR offset saved is for the current boot, the last_boot_info will
show the value of "current".
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250305164608.274956504@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Binary printf() functions are using printf() type of format, and compiler
is not happy about them as is:
lib/vsprintf.c:3130:47: error: function ‘vbin_printf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
lib/vsprintf.c:3298:33: error: function ‘bstr_printf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
kernel/trace/trace.c:3292:9: error: function ‘trace_vbprintk’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
kernel/trace/trace_seq.c:182:9: error: function ‘trace_seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
While at it, move existing __printf() attributes from the implementations
to the declarations. IT also fixes incorrect attribute parameters that are
used for trace_array_printk().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
fs/seq_file.c:418:35: error: function ‘seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
lib/seq_buf.c:162:17: error: function ‘seq_buf_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
IOMAP_F_ATOMIC_BIO mistakenly took the same value as of IOMAP_F_SIZE_CHANGED
in patch '370a6de7651b ("iomap: rework IOMAP atomic flags")'.
Let's fix this and let's also create some more space for filesystem reported
flags to avoid this in future. This patch makes the core iomap flags to start
from bit 15, moving downwards. Note that "flags" member within struct iomap
is of type u16.
Fixes: 370a6de7651b ("iomap: rework IOMAP atomic flags")
Signed-off-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20250327170119.61045-1-ritesh.list@gmail.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- New option "printk.debug_non_panic_cpus" allows to store printk
messages from non-panic CPUs during panic. It might be useful when
panic() fails. It is disabled by default because it increases the
chance to see the messages printed before panic() and on the
panic-CPU.
- New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build
kernel without the virtual terminal support which prefers ttynull
over serial console.
- Do not unblank suspended consoles.
- Some code clean up.
* tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Add option to allow non-panic CPUs to write to the ring buffer.
printk: Add an option to allow ttynull to be a default console device
printk: Check CON_SUSPEND when unblanking a console
printk: Rename console_start to console_resume
printk: Rename console_stop to console_suspend
printk: Rename resume_console to console_resume_all
printk: Rename suspend_console to console_suspend_all
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable
tracing via the kernel command line. Unfortunately, by the time the
login prompt appears, the trace is overwritten by the init process
and other user space start up applications.
Adding a "traceoff_after_boot" will disable tracing when the kernel
passes control to init which will allow developers to be able to see
the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace
events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in
the process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers
that are assigned when the variables are created. These variables
should all be constants.
- Other minor clean ups and fixes
* tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Replace strncpy with memcpy for fixed-length substring copy
tracing: Fix synth event printk format for str fields
tracing: Do not use PERF enums when perf is not defined
tracing: Ensure module defining synth event cannot be unloaded while tracing
tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER
tracing/osnoise: Fix possible recursive locking for cpus_read_lock()
tracing: Align synth event print fmt
tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format
tracepoint: Print the function symbol when tracepoint_debug is set
tracing: Constify struct event_trigger_ops
scripts/tracing: Remove scripts/tracing/draw_functrace.py
tracing: Update MAINTAINERS file to include tracepoint.c
tracing/user_events: Slightly simplify user_seq_show()
tracing/user_events: Don't use %pK through printk
tracing: gfp: Remove duplication of recording GFP flags
tracing: Remove orphaned event_trace_printk
ring-buffer: Fix typo in comment about header page pointer
tracing: Add traceoff_after_boot option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the
function graph tracer (funcgraph-args) that when set, the tracers
will record the registers that hold the arguments into each function
event. On reading of the trace, it will use BTF to print those
arguments. Most archs support up to 6 arguments (depending on the
complexity of the arguments) and those are printed.
If a function has more arguments then what was recorded, the output
will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
* tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use hashtable.h for event_hash
tracing: Fix use-after-free in print_graph_function_flags during tracer switching
function_graph: Remove the unused variable func
ftrace: Add arguments to function tracer
ftrace: Have funcgraph-args take affect during tracing
ftrace: Add support for function argument to graph tracer
ftrace: Add print_function_args()
ftrace: Have ftrace_free_filter() WARN and exit if ops is active
fgraph: Correct typo in ftrace_return_to_handler comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Ext4 bug fixes and cleanups, including:
- hardening against maliciously fuzzed file systems
- backwards compatibility for the brief period when we attempted to
ignore zero-width characters
- avoid potentially BUG'ing if there is a file system corruption
found during the file system unmount
- fix free space reporting by statfs when project quotas are enabled
and the free space is less than the remaining project quota
Also improve performance when replaying a journal with a very large
number of revoke records (applicable for Lustre volumes)"
* tag 'ext4-for_linus-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (71 commits)
ext4: fix OOB read when checking dotdot dir
ext4: on a remount, only log the ro or r/w state when it has changed
ext4: correct the error handle in ext4_fallocate()
ext4: Make sb update interval tunable
ext4: avoid journaling sb update on error if journal is destroying
ext4: define ext4_journal_destroy wrapper
ext4: hash: simplify kzalloc(n * 1, ...) to kzalloc(n, ...)
jbd2: add a missing data flush during file and fs synchronization
ext4: don't over-report free space or inodes in statvfs
ext4: clear DISCARD flag if device does not support discard
jbd2: remove jbd2_journal_unfile_buffer()
ext4: reorder capability check last
ext4: update the comment about mb_optimize_scan
jbd2: fix off-by-one while erasing journal
ext4: remove references to bh->b_page
ext4: goto right label 'out_mmap_sem' in ext4_setattr()
ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all()
ext4: introduce ITAIL helper
jbd2: remove redundant function jbd2_journal_has_csum_v2or3_feature
ext4: remove redundant function ext4_has_metadata_csum
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, there are three major updates: (1) folio conversion,
(2) refactoring for mount API conversion, (3) some performance
improvement such as direct IO, checkpoint speed, and IO priority
hints.
For stability, there are patches which add more sanity checks and
fixes some major issues like i_size in atomic write operations and
write pointer recovery in zoned devices.
Enhancements:
- huge folio converion work by Matthew Wilcox
- clean up for mount API conversion by Eric Sandeen
- improve direct IO speed in the overwrite case
- add some sanity check on node consistency
- set highest IO priority for checkpoint thread
- keep POSIX_FADV_NOREUSE ranges and add sysfs entry to reclaim pages
- add ioctl to get IO priority hint
- add carve_out sysfs node for fsstat
Bug fixes:
- disable nat_bits during umount to avoid potential nat entry corruption
- fix missing i_size update on atomic writes
- fix missing discard for active segments
- fix running out of free segments
- fix out-of-bounds access in f2fs_truncate_inode_blocks()
- call f2fs_recover_quota_end() correctly
- fix potential deadloop in prepare_compress_overwrite()
- fix the missing write pointer correction for zoned device
- fix to avoid panic once fallocation fails for pinfile
- don't retry IO for corrupted data scenario
There are many other clean up patches and minor bug fixes as usual"
* tag 'f2fs-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits)
f2fs: fix missing discard for active segments
f2fs: optimize f2fs DIO overwrites
f2fs: fix to avoid atomicity corruption of atomic file
f2fs: pass sbi rather than sb to parse_options()
f2fs: pass sbi rather than sb to quota qf_name helpers
f2fs: defer readonly check vs norecovery
f2fs: Pass sbi rather than sb to f2fs_set_test_dummy_encryption
f2fs: make LAZYTIME a mount option flag
f2fs: make INLINECRYPT a mount option flag
f2fs: factor out an f2fs_default_check function
f2fs: consolidate unsupported option handling errors
f2fs: use f2fs_sb_has_device_alias during option parsing
f2fs: add carve_out sysfs node
f2fs: fix to avoid running out of free segments
f2fs: Remove f2fs_write_node_page()
f2fs: Remove f2fs_write_meta_page()
f2fs: Remove f2fs_write_data_page()
f2fs: Remove check for ->writepage
Revert "f2fs: rebuild nat_bits during umount"
f2fs: fix to avoid accessing uninitialized curseg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix two bugs related to locking request cancelation (locking request
being retried instead of canceled; canceling the wrong locking
request)
- Prevent a race between inode creation and deferred delete analogous
to commit ffd1cf0443a2 from 6.13. This now allows to further simplify
gfs2_evict_inode() without introducing mysterious problems
- When in inode delete should be verified / retried "later" but that
isn't possible, skip the delete instead of carrying it out
immediately. This broke in 6.13
- More folio conversions from Matthew Wilcox (plus a fix from Dan
Carpenter)
- Various minor fixes and cleanups
* tag 'gfs2-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (22 commits)
gfs2: some comment clarifications
gfs2: Fix a NULL vs IS_ERR() bug in gfs2_find_jhead()
gfs2: Convert gfs2_meta_read_endio() to use a folio
gfs2: Convert gfs2_end_log_write_bh() to work on a folio
gfs2: Convert gfs2_find_jhead() to use a folio
gfs2: Convert gfs2_jhead_pg_srch() to gfs2_jhead_folio_search()
gfs2: Use b_folio in gfs2_check_magic()
gfs2: Use b_folio in gfs2_submit_bhs()
gfs2: Use b_folio in gfs2_trans_add_meta()
gfs2: Use b_folio in gfs2_log_write_bh()
gfs2: skip if we cannot defer delete
gfs2: remove redundant warnings
gfs2: minor evict fix
gfs2: Prevent inode creation race (2)
gfs2: Fix additional unlikely request cancelation race
gfs2: Fix request cancelation bug
gfs2: Check for empty queue in run_queue
gfs2: Remove more dead code in add_to_queue
gfs2: Replace GIF_DEFER_DELETE with GLF_DEFER_DELETE
gfs2: glock holder GL_NOPID fix
...
|
|
- Remove unused tools 'pci' build target left over after moving tests to
tools/testing/selftests/pci_endpoint (Jianfeng Liu)
- Fix typos and whitespace errors (Bjorn Helgaas)
* pci/misc:
PCI: Fix typos
tools/Makefile: Remove pci target
# Conflicts:
# drivers/pci/endpoint/functions/pci-epf-test.c
|
|
- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be
shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam)
- Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended
Capabilities (Shradha Todi)
- Add debugfs-based Silicon Debug, Error Injection, Statistical Counter
support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang)
- Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so
the DWC debugfs features work for Rockchip as well (Niklas Cassel)
* pci/controller/dwc:
PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode
PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability()
PCI: dwc: ep: Return -ENOMEM for allocation failures
PCI: dwc: Add Rockchip to the RAS DES allowed vendor list
PCI: Add Rockchip Vendor ID
PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link
PCI: dwc: Add debugfs based Statistical Counter support for DWC
PCI: dwc: Add debugfs based Error Injection support for DWC
PCI: dwc: Add debugfs based Silicon Debug support for DWC
PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC)
perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'
|
|
- Fix endpoint BAR testing so the test can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Verify that pci_endpoint interrupt tests set the correct IRQ type
(Kunihiko Hayashi)
- Fix interpretation of pci_endpoint_test_bars_read_bar() error returns
(Niklas Cassel)
- Fix potential string truncation in pci_endpoint_test_probe() (Niklas
Cassel)
- Increase endpoint test BAR size variable to accommodate BARs larger than
INT_MAX (Niklas Cassel)
- Release IRQs to avoid leak in pci_endpoint interrupt tests (Kunihiko
Hayashi)
- Log the correct IRQ type when pci_endpoint IRQ request test fails
(Kunihiko Hayashi)
- Remove pci_endpoint_test irq_type and no_msi globals; instead use
test->irq_type (Kunihiko Hayashi)
- Remove unnecessary use of managed IRQ functions in pci_endpoint_test
(Kunihiko Hayashi)
- Add and use IRQ_TYPE_* defines in pci_endpoint_test (Niklas Cassel)
- Add struct pci_epc_features.intx_capable and note that RK3568 and RK3588
can't raise INTx interrupts (Niklas Cassel)
- Expose supported IRQ types in CAPS so pci_endpoint_test can set
appropriate type (Niklas Cassel)
- Add PCITEST_IRQ_TYPE_AUTO to pci_endpoint_test for cases where the IRQ
type doesn't matter (Niklas Cassel)
* pci/endpoint-test:
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
selftests: pci_endpoint: Use IRQ_TYPE_* defines from UAPI header
misc: pci_endpoint_test: Use IRQ_TYPE_* defines from UAPI header
PCI: endpoint: pcitest: Add IRQ_TYPE_* defines to UAPI header
misc: pci_endpoint_test: Do not use managed IRQ functions
misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'
misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type
misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error
misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error
misc: pci_endpoint_test: Handle BAR sizes larger than INT_MAX
misc: pci_endpoint_test: Give disabled BARs a distinct error code
misc: pci_endpoint_test: Fix potential truncation in pci_endpoint_test_probe()
misc: pci_endpoint_test: Fix pci_endpoint_test_bars_read_bar() error handling
selftests: pci_endpoint: Add GET_IRQTYPE checks to each interrupt test
selftests: pci_endpoint: Skip disabled BARs
|
|
- Convert PCI device data so pci-epf-test works correctly on big-endian
endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework (Niklas Cassel)
- Add pci_epc_bar_size_to_rebar_cap() to convert a size to the Resizable
BAR Capability so endpoint drivers can configure what the Capability
register advertises (Niklas Cassel)
- Add DWC core support for EPF drivers to set BAR_RESIZABLE type and size
via dw_pcie_ep_set_bar() (Niklas Cassel)
- Describe TI AM65x (keystone) BARs 2 and 5 as Resizable, not Fixed
(Niklas Cassel)
- Reduce TI AM65x (keystone) BAR alignment requirement from 1MB to 64KB
(Niklas Cassel)
- Describe Rockchip rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
- Drop unused devm_pci_epc_destroy() (Zijun Hu)
- Fix pci-epf-test double free that causes an oops if the host reboots and
PERST# deassertion restarts endpoint BAR allocation (Christian Bruel)
- Drop dw_pcie_ep_find_ext_capability() and use
dw_pcie_find_ext_capability() instead (Niklas Cassel)
* pci/endpoint:
PCI: dwc: ep: Remove superfluous function dw_pcie_ep_find_ext_capability()
PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops
PCI: endpoint: Remove unused devm_pci_epc_destroy()
PCI: dw-rockchip: Describe Resizable BARs as Resizable BARs
PCI: keystone: Specify correct alignment requirement
PCI: keystone: Describe Resizable BARs as Resizable BARs
PCI: dwc: ep: Allow EPF drivers to configure the size of Resizable BARs
PCI: dwc: ep: Move dw_pcie_ep_find_ext_capability()
PCI: endpoint: Add pci_epc_bar_size_to_rebar_cap()
PCI: endpoint: Allow EPF drivers to configure the size of Resizable BARs
PCI: endpoint: pci-epf-test: Handle endianness properly
|
|
- Add device_add_of_node() to set dev->of_node and dev->fwnode only if they
haven't been set already (Herve Codina)
- Allow of_pci_set_address() to set the DT address property for root bus
nodes, where there is no PCI bridge to supply the PCI bus/device/function
part of the property (Herve Codina)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have several
features that require multiple drivers (Herve Codina)
* pci/devtree-create:
PCI: of: Create device tree PCI host bridge node
PCI: of_property: Constify parameter in of_pci_get_addr_flags()
PCI: of_property: Add support for NULL pdev in of_pci_set_address()
PCI: of: Use device_{add,remove}_of_node() to attach of_node to existing device
driver core: Introduce device_{add,remove}_of_node()
|
|
- Use pci_resource_n() to simplify BAR/window resource lookup (Ilpo
Järvinen)
- Fix typo that repeatedly distributed resources to a bridge instead of
iterating over subordinate bridges, which resulted in too little space to
assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV BARs,
to avoid failures when removing and re-adding devices (Ilpo Järvinen)
- Fix a double counting error for I/O resources, as we previously did for
memory resources (Ilpo Järvinen)
- Use resource_set_{range,size}() helpers in more places (Ilpo Järvinen)
- Add pci_resource_is_iov() to identify IOV resources (Ilpo Järvinen)
- Add pci_resource_num() to look up the BAR number from the resource
pointer (Ilpo Järvinen)
- Add restore_dev_resource() to simplify code that resources saved device
resources (Ilpo Järvinen)
- Allow drivers to enable devices even if we haven't assigned optional IOV
resources to them (Ilpo Järvinen)
- Improve debug output during resource reallocation (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce failures
if we can't allocate them (Ilpo Järvinen)
- Move declarations of pci_rescan_bus_bridge_resize(),
pci_reassign_bridge_resources(), and CardBus-related sizes from
include/linux/pci.h to drivers/pci/pci.h since they're not used outside
the PCI core (Ilpo Järvinen)
- Make pci_setup_bridge() static (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults in some
cases, which broke vfio-pci lazy mapping on first access (Niklas
Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was
disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices (Niklas
Schnelle)
* pci/resource:
s390/pci: Support mmap() of PCI resources except for ISM devices
s390/pci: Introduce pdev->non_mappable_bars and replace VFIO_PCI_MMAP
s390/pci: Fix s390_mmio_read/write syscall page fault handling
PCI: Fix NULL dereference in SR-IOV VF creation error path
PCI: Move cardbus IO size declarations into pci/pci.h
PCI: Make pci_setup_bridge() static
PCI: Move resource reassignment func declarations into pci/pci.h
PCI: Move pci_rescan_bus_bridge_resize() declaration to pci/pci.h
PCI: Fix BAR resizing when VF BARs are assigned
PCI: Do not claim to release resource falsely
PCI: Increase Resizable BAR support from 512 GB to 128 TB
PCI: Rework optional resource handling
PCI: Perform reset_resource() and build fail list in sync
PCI: Use res->parent to check if resource is assigned
PCI: Add debug print when releasing resources before retry
PCI: Indicate optional resource assignment failures
PCI: Always have realloc_head in __assign_resources_sorted()
PCI: Extend enable to check for any optional resource
PCI: Add restore_dev_resource()
PCI: Remove incorrect comment from pci_reassign_resource()
PCI: Consolidate assignment loop next round preparation
PCI: Rename retval to ret
PCI: Use while loop and break instead of gotos
PCI: Refactor pdev_sort_resources() & __dev_sort_resources()
PCI: Converge return paths in __assign_resources_sorted()
PCI: Add dev & res local variables to resource assignment funcs
PCI: Add pci_resource_num() helper
PCI: Check resource_size() separately
PCI: Add pci_resource_is_iov() to identify IOV resources
PCI: Use resource_set_{range,size}() helpers
PCI: Use SZ_* instead of literals in setup-bus.c
PCI: Fix old_size lower bound in calculate_iosize() too
PCI: Allow relaxed bridge window tail sizing for optional resources
PCI: Simplify size1 assignment logic
PCI: Use min_align, not unrelated add_align, for size0
PCI: Remove add_align overwrite unrelated to size0
PCI: Use downstream bridges for distributing resources
PCI: Cleanup dev->resource + resno to use pci_resource_n()
|
|
- Drop shpchp module init/exit logging (Ilpo Järvinen)
- Replace shpchp dbg() with ctrl_dbg() and remove unused dbg(), err(),
info(), warn() wrappers (Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused .get_power(), .set_power() function pointers (Guilherme
Giacomo Simoes)
- Drop superfluous pci_hotplug_slot_list (Lukas Wunner)
- Drop superfluous try_module_get() calls (Lukas Wunner)
- Drop superfluous NULL pointer checks (Lukas Wunner)
- Pass struct hotplug_slot pointers directly to avoid backpointer
dereferencing in has_*_file() (Lukas Wunner)
- Inline pci_hp_{create,remove}_module_link() to reduce exported symbols
(Lukas Wunner)
- Disable hotplug interrupts in portdrv only when pciehp is not enabled to
prevent issuing two hotplug commands too close together (Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed to
address a common deadlock when resuming after a device was removed during
system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo
Järvinen)
* pci/hotplug:
PCI: pciehp: Don't enable HPIE when resuming in poll mode
PCI: pciehp: Avoid unnecessary device replacement check
PCI/portdrv: Only disable pciehp interrupts early when needed
PCI: hotplug: Inline pci_hp_{create,remove}_module_link()
PCI: hotplug: Avoid backpointer dereferencing in has_*_file()
PCI: hotplug: Drop superfluous NULL pointer checks in has_*_file()
PCI: hotplug: Drop superfluous try_module_get() calls
PCI: hotplug: Drop superfluous pci_hotplug_slot_list
PCI: cpcihp: Remove unused .get_power() and .set_power()
PCI: shpchp: Remove 'shpchp_debug' module parameter
PCI: shpchp: Remove unused logging wrappers
PCI: shpchp: Change dbg() -> ctrl_dbg()
PCI: shpchp: Remove logging from module init/exit functions
|
|
- Enable Configuration RRS SV early instead of during child bus scanning
(Bjorn Helgaas)
- Cache offset of Resizable BAR capability to avoid redundant searches for
it (Bjorn Helgaas)
- Fix reference leaks in pci_register_host_bridge() and
pci_alloc_child_bus() (Ma Ke)
- Drop put_device() in pci_register_host_bridge() left over from converting
device_register() to device_add() (Dan Carpenter)
* pci/enumeration:
PCI: Remove stray put_device() in pci_register_host_bridge()
PCI: Fix reference leak in pci_alloc_child_bus()
PCI: Fix reference leak in pci_register_host_bridge()
PCI: Cache offset of Resizable BAR capability
PCI: Enable Configuration RRS SV early
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"This is mainly set of cleanups of asm-generic/io.h, resolving problems
with inconsistent semantics of ioread64/iowrite64 that were causing
runtime and build issues.
The "GENERIC_IOMAP" version that switches between inb()/outb() and
readb()/writeb() style accessors is now only used on architectures
that have PC-style ISA devices that are not memory mapped (x86, uml,
m68k-q40 and powerpc-powernv), while alpha and parisc use a more
complicated variant and everything else just maps the ioread
interfaces to plan MMIO (readb/writeb etc).
In addition there are two small changes from Raag Jadav to simplify
the asm-generic/io.h indirect inclusions and from Jann Horn to fix a
corner case with read_word_at_a_time"
* tag 'asm-generic-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
rwonce: fix crash by removing READ_ONCE() for unaligned read
rwonce: handle KCSAN like KASAN in read_word_at_a_time()
m68k: coldfire: select PCI_IOMAP for PCI
mips: export pci_iounmap()
mips: fix PCI_IOBASE definition
m68k/nommu: stop using GENERIC_IOMAP
mips: drop GENERIC_IOMAP wrapper
powerpc: asm/io.h: remove split ioread64/iowrite64 helpers
parisc: stop using asm-generic/iomap.h
sh: remove duplicate ioread/iowrite helpers
alpha: stop using asm-generic/iomap.h
io.h: drop unused headers
drm/draw: include missing headers
asm-generic/io.h: rework split ioread64/iowrite64 helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity.
Cc: stable@vger.kernel.org
Fixes: a05d1f625c7aa ("io_uring/net: support bundles for send")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8b611dbb54d1cd47a88681f5d38c84d0c02bc563.1743067183.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
Pull zstd updates from Nick Terrell:
"Update zstd to the latest upstream release v1.5.7.
The two major motivations for updating Zstandard are to keep the code
up to date, and to expose API's needed by Intel for the QAT
compression accelerator.
Imported cleanly from the upstream tag v1.5.7-kernel, which is signed
by upstream's signing key EF8FE99528B52FFD"
Link: https://github.com/facebook/zstd/releases/tag/v1.5.7
Link: https://github.com/facebook/zstd/releases/tag/v1.5.7-kernel
Link: https://keyserver.ubuntu.com/pks/lookup?search=EF8FE99528B52FFD&fingerprint=on&op=index
* tag 'zstd-linus-v6.15-rc1' of https://github.com/terrelln/linux:
zstd: Import upstream v1.5.7
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
|
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Every client driver has the struct cmdq_client information, so
it's not necessary to store it in struct cmdq_pkt. cl is used to
store struct cmdq_client information and now no client driver use
it, so remove it.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
