summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2012-07-30[media] v4l2: add core support for the new VIDIOC_ENUM_FREQ_BANDS ioctlHans Verkuil
This adds the usual core support code for this new ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-30[media] davinci: vpif: add support for clipping on output dataManjunath Hadli
add hardware clipping support for VPIF output data. This is needed as it is possible that the external encoder might get confused between the FF or 00 which are a part of the data and that of the SAV or EAV codes. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] media: gpio-ir-recv: add allowed_protos for platform dataDu, Changbin
It's better to give platform code a chance to specify the allowed protocols to use. [mchehab@redhat.com: fix merge conflict with a patch that made half of this change] Signed-off-by: Du, Changbin <changbin.du@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] videobuf2-core: add helper functionsHans Verkuil
Add helper functions to make it easier to adapt drivers to vb2. These helpers take care of core locking and check if the filehandle is the owner of the queue. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] v4l2-dev/ioctl.c: add vb2_queue support to video_deviceHans Verkuil
This prepares struct video_device for easier integration with vb2. It also introduces a new lock that protects the vb2_queue. It is up to the driver to use it or not. And the driver can associate an owner filehandle with the queue to check whether queuing requests are permitted for the calling filehandle. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[media] v4l2-ioctl: remove v4l_(i2c_)print_ioctlHans Verkuil
v4l_i2c_print_ioctl wasn't used and v4l_print_ioctl could be replaced by v4l_printk_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-06[PATCH] media: add Analog Devices ADV7393 video encoder driverBenoît Thébaudeau
Add ADV7393 I²C-based video encoder driver. This driver has been tested on custom hardware. It has been tested for composite output. It is derived from the ADV7343 driver. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-05[media] videobuf-core.h: remove input fieldsMauro Carvalho Chehab
Now that the input fields got removed from the userspace API, there's no sense to keep there at the VB struct. Remove it. Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-25[media] media: gpio-ir-recv: add map nameBenoît Thébaudeau
Make it possible for gpio-ir-recv users to choose a map name. Cc: Ravi Kumar V <kumarrav@codeaurora.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] videobuf2: correct the #ifndef text mistake in videobuf2-dma-contig.hAlbert Wang
It should be a mistake due to copy & paste in header file Correct it in videobuf2-dma-config.h for avoiding duplicate include it Change-Id: I1f71fcec2889c033c7db380c58d9a1369c5afb35 Signed-off-by: Albert Wang <twang13@marvell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-24[media] mt9t001: Implement V4L2_CID_PIXEL_RATE controlLaurent Pinchart
The pixel rate control is required by the OMAP3 ISP driver and should be implemented by all media controller-compatible sensor drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] patch for Asus My Cinema PS3-100 (1043:48cd)remi schwartz
Signed-off-by: Remi Schwartz <remi.schwartz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] smiapp: Allow using external clock from the clock frameworkSakari Ailus
Instead of providing a function in platform data, allow also providing the name of the external clock and use it through the clock framework. Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] videobuf-dma-contig: add cache supportFederico Vaga
Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] ati_remote: add keymap for Medion X10 OR2x remotesAnssi Hannula
Add another Medion X10 remote keymap. This is for the Medion OR2x remotes with the Windows MCE button. The receiver shipped with this remote has the same USB ID as the other Medion receivers, but the name is different and is therefore used to detect this variant. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Rework the video pipeline control functionsSylwester Nawrocki
There is getting more entities to manage within single video pipeline in newer SoCs. To simplify code put subdevs' pointer into an array rather than adding new member in struct fimc_pipeline for each subdev. This allows to easier handle subdev operations in proper order. Additionally walk graph in one direction only in fimc_pipeline_prepare() function to make sure we properly gather only media entities that below to single data pipeline. This avoids wrong initialization in case where, for example there are multiple active links from s5p-mipi-csis subdev output pad. struct fimc_pipeline declaration is moved to the driver's public header to allow other drivers to reuse the fimc-lite driver added in subsequent patches. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] v4l2 framework: add support for the new dv_timings ioctlsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] V4L2: sh_mobile_ceu: manage lower 8bit busKuninori Morimoto
CAMCR::DTIF feild controls camera bus as upper8bit/16bit/lower8bit. This patch manages unmanaged lower 8bit bus Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Support user-configurable line strideLaurent Pinchart
Add a capabilities field to the soc_camera_host structure to flag hosts that support user-configurable line strides. soc_camera_try_fmt() then passes the user-provided bytesperline and sizeimage format fields to such hosts, and expects the host to check (and fix if needed) the values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [g.liakhovetski@gmx.de: fix a typo in mx2_camera.c] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Add soc_mbus_image_sizeLaurent Pinchart
The function returns the minimum size of an image for a given number of bytes per line (as per the V4L2 specification), width and format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] soc-camera: Add plane layout information to struct soc_mbus_pixelfmtLaurent Pinchart
To compute the value of the v4l2_pix_format::bytesperline field, we need information about planes layout for planar formats. The new enum soc_mbus_layout conveys that information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] V4L: soc-camera: (cosmetic) use a more explicit name for a host handlerGuennadi Liakhovetski
Use "enum_framesizes" instead of "enum_fsizes" to more precisely follow the name of the respective ioctl(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Sergio Aguirre <sergio.a.aguirre@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] v4l2-event: fix regression with initial event handlingHans Verkuil
If the V4L2_EVENT_SUB_FL_SEND_INITIAL was set, then the application expects to receive an initial event of the initial value of the control. However, commit c53c2549333b340e2662dc64ec81323476b69a97 that added the new v4l2_subscribed_event_ops introduced a regression: while the code still queued that initial event the __v4l2_event_queue_fh() function was modified to ignore such requests if sev->elems was 0 (meaning that the event subscription wasn't finished yet). And sev->elems was only set to a non-zero value after the add operation returned. This patch fixes this by passing the elems value to the add function. Then the add function can set it before queuing the initial event. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15Merge remote-tracking branch 'linus/master' into staging/for_v3.5Mauro Carvalho Chehab
* linus/master: (805 commits) tty: Fix LED error return openvswitch: checking wrong variable in queue_userspace_packet() bonding: Fix LACPDU rx_dropped commit. Linux 3.4-rc7 ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper MAINTAINERS: Add myself as the cpufreq maintainer dm mpath: check if scsi_dh module already loaded before trying to load dm thin: correct module description dm thin: fix unprotected use of prepared_discards list dm thin: reinstate missing mempool_free in cell_release_singleton gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers powerpc/irq: Fix another case of lazy IRQ state getting out of sync ks8851: Update link status during link change interrupt ... Conflicts: drivers/media/common/tuners/xc5000.c drivers/media/common/tuners/xc5000.h drivers/usb/gadget/uvc_queue.c
2012-05-14Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For a some fix patches for v3.4, including a regression fix at DVB core" Fix up trivial conflicts in Documentation/feature-removal-schedule.txt * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] gspca - sonixj: Fix a zero divide in isoc interrupt [media] media: videobuf2-dma-contig: include header for exported symbols [media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer [media] media: vb2-memops: Export vb2_get_vma symbol [media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS [media] s5p-fimc: Fix locking in subdev set_crop op [media] dvb_frontend: fix a regression with DVB-S zig-zag [media] fintek-cir: change || to && [media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal [media] rc: Postpone ISR registration [media] marvell-cam: fix an ARM build error [media] V4L: soc-camera: protect hosts during probing from overzealous user-space
2012-05-14[media] v4l2-dev: rename two functionsHans Verkuil
Rename the function v4l2_dont_use_lock to v4l2_disable_ioctl_locking, and rename v4l2_dont_use_cmd to v4l2_disable_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l2-dev.h: add comment not to use V4L2_FL_LOCK_ALL_FOPS in new driversHans Verkuil
This flag is for legacy drivers only and will go away in the future. A note regarding commit 5126f2590bee412e3053de851cb07f531e4be36a (v4l2-dev: add flag to have the core lock all file operations): That commit message suggests that by not taking the core lock for fops other than unlocked_ioctl all problems relating to AB-BA locking and mm->mmap_sem are solved. This is not the case. More work needs to be done by moving the core lock further down into video_ioctl2. It should only be taken after the copy_from/to_user calls are done. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: fix querycap, vbi/video separation and g/s_registerHans Verkuil
The querycap ioctl returned an incorrect version number and incorrect capabilities (mixing up vbi and video caps). The reason for that was that video nodes could do vbi activities: that should be separated between the vbi and video nodes. There were also a few minor problems with dbg_g/s_register that have been resolved. The mxb/saa7146 driver now passes the v4l2_compliance tests. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: support control events and priority handlingHans Verkuil
Use v4l2_fh which gives you control events and priority handling for free. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: rename vbi/video_q to vbi/video_dmaqHans Verkuil
There was also a vbi_q and video_q in saa7146_fh, so that was confusing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: remove the unneeded type field from saa7146_fhHans Verkuil
This information can also be retrieved from struct video_device. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: move vbi fields from saa7146_fh to saa7146_vvHans Verkuil
This fields are global and don't belong in a fh struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: move video_fmt from saa7146_fh to saa7146_vvHans Verkuil
This is a global structure and does not belong to saa7146_fh. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: move overlay information from saa7146_fh into saa7146_vvHans Verkuil
This is global information, not per-filehandle information. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] mxb/saa7146: first round of cleanupsHans Verkuil
Convert to the control framework, fix the easy v4l2-compliance failures. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] V4L: Add helper function for standard integer menu controlsSylwester Nawrocki
This patch adds v4l2_ctrl_new_int_menu() helper function which can be used in drivers for creating standard integer menu control with driver-specific menu item list. It is similar to v4l2_ctrl_new_std_menu(), except it doesn't have a mask parameter and an additional qmenu parameter allows passing an array of signed 64-bit integers as the menu item list. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Tested-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l: v4l2-ctrls: moves the forward declaration of struct fileLaurent Pinchart
This fixes the following warning: In file included from drivers/media/video/v4l2-subdev.c:29: include/media/v4l2-ctrls.h:501: warning: 'struct file' declared inside parameter list include/media/v4l2-ctrls.h:501: warning: its scope is only this definition or declaration, which is probably not what you want include/media/v4l2-ctrls.h:509: warning: 'struct file' declared inside parameter list Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] mt9p031: Replace the reset board callback by a GPIO numberLaurent Pinchart
Use the GPIO from the sensor driver instead of calling back to board code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] mt9p031: Identify color/mono models using I2C device nameLaurent Pinchart
Instead of passing a color/monochrome flag through platform data, rely on the I2C device name to identify the chip model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l2-dev: add flag to have the core lock all file operationsHans Verkuil
This used to be the default if the lock pointer was set, but now that lock is by default only used for ioctl serialization. Those drivers that already used core locking have this flag set explicitly, except for some drivers where it was obvious that there was no need to serialize any file operations other than ioctl. The drivers that didn't need this flag were: drivers/media/radio/dsbr100.c drivers/media/radio/radio-isa.c drivers/media/radio/radio-keene.c drivers/media/radio/radio-miropcm20.c drivers/media/radio/radio-mr800.c drivers/media/radio/radio-tea5764.c drivers/media/radio/radio-timb.c drivers/media/video/vivi.c sound/i2c/other/tea575x-tuner.c The other drivers that use core locking and where it was not immediately obvious that this flag wasn't needed were changed so that the flag is set together with a comment that that driver needs work to avoid having to set that flag. This will often involve taking the core lock in the fops themselves. Eventually this flag should go and it should not be used in new drivers. There are a few reasons why we want to avoid core locking of non-ioctl fops: in the case of mmap this can lead to a deadlock in rare situations since when mmap is called the mmap_sem is held and it is possible for other parts of the code to take that lock as well (copy_from_user()/copy_to_user() perform a down_read(&mm->mmap_sem) when a page fault occurs). It is very unlikely that that happens since the core lock serializes all fops, but the kernel warns about it if lock validation is turned on. For poll it is also undesirable to take the core lock as that can introduce increased latency. The same is true for read/write. While it was possible to make flags or something to turn on/off taking the core lock for each file operation, in practice it is much simpler to just not take it at all except for ioctl and leave it to the driver to take the lock. There are only a handful fops compared to the zillion ioctls we have. I also wanted to make it obvious which drivers still take the lock for all fops, so that's why I chose to have drivers set it explicitly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l2-dev/ioctl: determine the valid ioctls upfrontHans Verkuil
Rather than testing whether an ioctl is implemented in the driver or not every time the ioctl is called, do it upfront when the device is registered. This also allows a driver to disable certain ioctls based on the capabilities of the detected board, something you can't do today without creating separate v4l2_ioctl_ops structs for each new variation. For the most part it is pretty straightforward, but for control ioctls a flag is needed since it is possible that you have per-filehandle controls, and that can't be determined upfront of course. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l2-dev: make it possible to skip locking for selected ioctlsHans Verkuil
Using the V4L2 core lock is a very robust method that is usually very good at doing the right thing. But some drivers, particularly USB drivers, may want to prevent the core from taking the lock for specific ioctls, particularly buffer queuing ioctls. The reason is that certain commands like S_CTRL can take a long time to process over USB and all the time the core has the lock, preventing VIDIOC_DQBUF from proceeding, even though a frame may be ready in the queue. This introduces unwanted latency. Since the buffer queuing commands often have their own internal lock it is often not necessary to take the core lock. Drivers can now say that they don't want the core to take the lock for specific ioctls. As it is a specific opt-out it makes it clear to the reviewer that those ioctls will need more care when reviewing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] smiapp: Add driverSakari Ailus
Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as three subdevs, pixel array, binner and scaler --- in case the device has a scaler. Currently it relies on the board code for external clock handling. There is no fast way out of this dependency before the ISP drivers (omap3isp) among others will be able to export that clock through the clock framework instead. Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] omap3isp: Add lane configuration to platform dataSakari Ailus
Add lane configuration (order of clock and data lane) to platform data on both CCP2 and CSI-2. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] omap3isp: Move definitions required by board code under include/mediaSakari Ailus
XCLK definitions are often required by the board code. Move them to public include file. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l: Allow changing control handler lockSakari Ailus
Allow choosing the lock used by the control handler. This may be handy sometimes when a driver providing multiple subdevs does not want to use several locks to serialise its functions. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l: Implement v4l2_subdev_link_validate()Sakari Ailus
v4l2_subdev_link_validate() is the default op for validating a link. In V4L2 subdev context, it is used to call a pad op which performs the proper link check without much extra work. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] media: Add link_validate() op to check links to the sink padSakari Ailus
The purpose of the link_validate() op is to allow an entity driver to ensure that the properties of the pads at the both ends of the link are suitable for starting the pipeline. link_validate is called on sink pads on active links which belong to the active part of the graph. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-07[media] v4l2-ctrls: Use v4l2_subscribed_event_opsHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> [hans.verkuil@cisco.com: Fix a locking bug] Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-07[media] v4l2-event: Add v4l2_subscribed_event_opsHans de Goede
Just like with ctrl events, drivers may want to get called back on listener add / remove for other event types too. Rather then special casing all of this in subscribe / unsubscribe event it is better to use ops for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>