summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2013-02-08[media] media: ov7670: Add possibility to disable pixclk during hblankJavier Martin
Some bridge drivers capture pixels during blanking periods if pixclk is enabled. In order to avoid capturing bogus data we need to disable pixclk in the sensor during those blanking periods. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-08[media] media: ov7670: add possibility to bypass pll for ov7675Javier Martin
For a frame rate of 30 fps a pixclk of 24MHz is needed. For those cases where the ov7670 has a clean 24MHz input (xvclk) the PLL can be bypassed. This will result in a value of clkrc of 1, which means that in practice pixclk = xvclk (input clock) Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] blackfin: add error frame supportScott Jiang
Mark current frame as error frame when ppi error interrupt report fifo error. Member next_frm in struct bcap_device can be optimized out. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] media: tvp514x: remove field descriptionPrabhakar Lad
This patch removes the field description of fields that no longer exists, along side aligns the field description of fields. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] media: adv7343: accept configuration through platform dataLad, Prabhakar
The current code was implemented with some default configurations, this default configuration works on board and doesn't work on other. This patch accepts the configuration through platform data and configures the encoder depending on the data passed. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Redefine platform data structure for fimc-isSylwester Nawrocki
Newer Exynos4 SoC are equipped with a local camera ISP that controls external raw image sensor directly. Such sensors can be connected through FIMC-LITEn (and MIPI-CSISn) IPs to the ISP, which then feeds image data to the FIMCn IP. Thus there can be two busses associated with an image source (sensor). Rename struct s5p_fimc_isp_info describing external image sensor (video decoder) to struct fimc_source_info to avoid confusion. bus_type is split into fimc_bus_type and sensor_bus_type. The bus type enumeration is extended to include both FIMC Writeback input types. The bus_type enumeration and the data structure name in the board files are modified according to the above changes. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add S5C73M3 camera driverAndrzej Hajda
Add driver for S5C73M3 image sensor. The driver exposes the sensor as two subdevs: pure sensor and output interface. Two subdev architecture supports interleaved UYVY/JPEG image format with separate frame size for both sub-formats, there is a spearate pad for each sub-format. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add driver for OV9650/52 image sensorsSylwester Nawrocki
This patch adds V4L2 sub-device driver for OV9650/OV9652 image sensors. The driver exposes following V4L2 controls: - auto/manual exposure, - auto/manual white balance, - auto/manual gain, - brightness, saturation, sharpness, - horizontal/vertical flip, - color bar test pattern, - banding filter (power line frequency). Frame rate can be configured with g/s_frame_interval pad level ops. Supported resolution are only: SXGA, VGA, QVGA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_ctrl_subdev_log_status() helper functionSylwester Nawrocki
This patch adds a v4l2 core helper function that can be used as the log_status handler for subdevs that only need to log state of the v4l2 controls owned by the subdev's control handler. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_ctrl_subdev_subscribe_event() helper functionSylwester Nawrocki
Add a v4l2 core helper function that can be used as the subdev .subscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_event_subdev_unsubscribe() helper functionSylwester Nawrocki
Add a v4l2 core helper function that can be used as the subdev .unsubscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] v4l2-ctrl: Add helper function for the controls range updateSylwester Nawrocki
This patch adds a helper function that allows to modify range, i.e. minimum, maximum, step and default value of a v4l2 control, after the control has been created and initialized. This is helpful in situations when range of a control depends on user configurable parameters, e.g. camera sensor absolute exposure time depending on an output image resolution and frame rate. v4l2_ctrl_modify_range() function allows to modify range of an INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls. Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add header file defining standard image sizesSylwester Nawrocki
Add common header file defining standard image sizes, so we can avoid redefining those in each driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: split struct soc_camera_link into host and subdevice partsGuennadi Liakhovetski
struct soc_camera_link currently contains fields, used both by sensor and bridge drivers. To make subdevice driver re-use simpler, split it into a host and a subdevice parts. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: remove struct soc_camera_device::video_lockGuennadi Liakhovetski
Currently soc-camera has a per-device node lock, used for video operations and a per-host lock for code paths, modifying host's pipeline. Manipulating the two locks increases complexity and doesn't bring any advantages. This patch removes the per-device lock and uses the per-host lock for all operations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: properly fix camera probing racesGuennadi Liakhovetski
The recently introduced host_lock causes lockdep warnings, besides, list enumeration in scan_add_host() must be protected by holdint the list_lock. OTOH, holding .video_lock in soc_camera_open() isn't enough to protect the host during its building of the pipeline, because .video_lock is per soc-camera device. If, e.g. more than one sensor can be attached to a host and the user tries to open both device nodes simultaneously, host's .add() method can be called simultaneously for both sensors. Fix these problems by holding list_lock instead of .host_lock in scan_add_host() and taking it shortly at the beginning of soc_camera_open(), and using .host_lock to protect host's .add() and .remove() operations only. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] v4l2-ctrls: add a notify callbackHans Verkuil
Sometimes platform/bridge drivers need to be notified when a control from a sub-device changes value. In order to support this a notify callback was added. [dheitmueller@kernellabs.com: fix merge conflict in v4l2-ctrls.c] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-26[media] v4l2: blackfin: add EPPI3 supportScott Jiang
Bf60x soc has a new PPI called Enhanced PPI version 3. HD video is supported now. To achieve this, we redesign ppi params and add dv timings feature. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-23[media] rc/keymaps: add RC keytable for MyGica X8507Alfredo Jesús Delaiti
Add RC-5 remote keytable definition for MyGica X8507. [mchehab@redhat.com: fixed whitespacing - it seems that Alfredo's emailer mangled it] Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] davinci: vpbe: pass different platform names to handle different ip'sLad, Prabhakar
The vpbe driver can handle different platforms DM644X, DM36X and DM355. To differentiate between this platforms venc_type/vpbe_type was passed as part of platform data which was incorrect. The correct way to differentiate to handle this case is by passing different platform names. This patch creates platform_device_id[] array supporting different platforms and assigns id_table to the platform driver, and finally in the probe gets the actual device by using platform_get_device_id() and gets the appropriate driver data for that platform. Taking this approach will also make the DT transition easier. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] davinci/vpss: add helper functions for setting hw paramsManjunath Hadli
Add vpss helper functions to be used in the main driver for setting hardware parameters. Add interface functions to set sync polarity, interrupt completion and pageframe size in vpss to be used by the main driver. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] v4l: Helper function for obtaining timestampsSakari Ailus
v4l2_get_timestamp() produces a monotonic timestamp but unlike ktime_get_ts(), it uses struct timeval instead of struct timespec, saving the drivers the conversion job when getting timestamps for v4l2_buffer's timestamp field. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] media: mem2mem: make reference to struct m2m_ops in the core constGuennadi Liakhovetski
The mem2mem core doesn't change struct m2m_ops, provided by the driver, make references to it const. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-28[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interfaceSylwester Nawrocki
This patch adds V4L2 driver for Samsung S3C24XX/S3C64XX SoC series camera interface. The driver exposes a subdev device node for CAMIF pixel resolution and crop control and two video capture nodes - for the "codec" and "preview" data paths. It has been tested on Mini2440 (s3c2440) and Mini6410 (s3c6410) board with gstreamer and mplayer. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Andrey Gusakov <dron0gus@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-28Merge remote-tracking branch 'linus/master' into staging/for_v3.8Mauro Carvalho Chehab
* linus/master: (1428 commits) futex: avoid wake_futex() for a PI futex_q watchdog: using u64 in get_sample_period() writeback: put unused inodes to LRU after writeback completion mm: vmscan: check for fatal signals iff the process was throttled Revert "mm: remove __GFP_NO_KSWAPD" proc: check vma->vm_file before dereferencing UAPI: strip the _UAPI prefix from header guards during header installation include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID Linux 3.7-rc7 powerpc/eeh: Do not invalidate PE properly ALSA: hda - Fix build without CONFIG_PM of/address: sparc: Declare of_iomap as an extern function for sparc again PM / QoS: fix wrong error-checking condition bnx2x: remove redundant warning log vxlan: fix command usage in its doc 8139cp: revert "set ring address before enabling receiver" MPI: Fix compilation on MIPS with GCC 4.4 and newer MIPS: Fix crash that occurs when function tracing is enabled MIPS: Merge overlapping bootmem ranges jbd: Fix lock ordering bug in journal_unmap_buffer() ...
2012-11-25[media] v4l: vb2: add buffer exporting via dmabufTomasz Stanislawski
This patch adds extension to videobuf2-core. It allow to export an mmap buffer as a DMABUF file descriptor. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: add buffer exporting via dmabufTomasz Stanislawski
This patch adds extension to V4L2 api. A new ioctl VIDIOC_EXPBUF is added. The ioctl is used to export an mmap buffer as a DMABUF file descriptor. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: vb2-dma-contig: let mmap method to use dma_mmap_coherent callMarek Szyprowski
Let mmap method to use dma_mmap_coherent call. Moreover, this patch removes vb2_mmap_pfn_range from videobuf2 helpers as it was suggested by Laurent Pinchart. The function is no longer used in vb2 code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: vb2: add prepare/finish callbacks to allocatorsMarek Szyprowski
This patch adds support for prepare/finish callbacks in VB2 allocators. These callback are used for buffer flushing. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: vb2: add support for shared buffer (dma_buf)Sumit Semwal
This patch adds support for DMABUF memory type in videobuf2. It calls relevant APIs of dma_buf for v4l reqbuf / qbuf / dqbuf operations. For this version, the support is for videobuf2 as a user of the shared buffer; so the allocation of the buffer is done outside of V4L2. [A sample allocator of dma-buf shared buffer is given at [1]] [1]: Rob Clark's DRM: https://github.com/robclark/kernel-omap4/commits/drmplane-dmabuf [original work in the PoC for buffer sharing] Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] mt9v022: set y_skip_top field to zero as defaultAnatolij Gustschin
Set "y_skip_top" to zero and revise comment as I do not see this line corruption on two different mt9v022 setups. The first read-out line is perfectly fine. Add mt9v022 platform data configuring y_skip_top for platforms that have issues with the first read-out line. Set y_skip_top to 1 for pcm990 board. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] adv7604: Replace prim_mode by modeHans Verkuil
Changes the way the primary mode is handled: - Remove it from platform_data since it doesn't belong there. - Add a new mode enum for use with s_routing. - Collapse the two HDMI modes into one HDMI mode: when setting up the timings manually we do not need to select HDMI_COMP mode. That's only needed when selecting a preset. This patch prepares for the next step where we switch to using the presets where available. Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media: davinci: vpbe: migrate driver to videobuf2Lad, Prabhakar
This patch migrates VPBE display driver to videobuf2 framework. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media: davinci: vpbe: fix build warningLad, Prabhakar
Warnings were generated because of the following commit changed data type for address pointer 195bbca ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors add __iomem annotation to fix following warnings drivers/media/platform/davinci/vpbe_osd.c: In function ‘osd_read’: drivers/media/platform/davinci/vpbe_osd.c:49:2: warning: passing argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [enabled by default] arch/arm/include/asm/io.h:104:19: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’ This patch stores the ioremap_nocache() returned address in a void __iomem * instead of a unsigned long and passes the same to readl/writel functions which fixes the above warnings. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] v4l, smiapp, smiapp-pll, adp1653: Update contact informationSakari Ailus
Update contact information to correspond my e-mail address changes. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27[media] rc-core: add separate defines for protocol bitmaps and numbersDavid Härdeman
The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: s5p-hdmi: add HPD GPIO to platform dataTomasz Stanislawski
This patch extends s5p-hdmi platform data by a GPIO identifier for Hot-Plug-Detection pin. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] s5p-fimc: Remove unused platform data structure fieldsSylwester Nawrocki
alignment, fixed_phy_vdd and phy_enable fields are now unused so removed them. The data alignment is now derived directly from media bus pixel code, phy_enable callback has been replaced with direct function call and fixed_phy_vdd was dropped in commit 438df3ebe5f0ce408490a777a758d5905f0dd58f "[media] s5p-csis: Handle all available power supplies". Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: davinci: vpif: display: separate out subdev from outputLad, Prabhakar
vpif_display relied on a 1-1 mapping of output and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of outputs. Each output refers to a subdev and has routing information. An output does not have to have a subdev. The initial output for each channel is set to the fist output. Currently missing is support for associating multiple subdevs with an output. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] davinci: move struct vpif_interface to chan_cfgHans Verkuil
struct vpif_interface is channel specific, not subdev specific. Move it to the channel config. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] vpif_capture: move routing info from subdev to inputHans Verkuil
Routing information is a property of the input, not of the subdev. One subdev may provide multiple inputs, each with its own routing information. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] vpif_capture: remove unnecessary can_route flagHans Verkuil
Calling a subdev op that isn't implemented will just return -ENOIOCTLCMD No need to have a flag for that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: v4l2-ctrl: add a helper function to add standard control with ↵Lad, Prabhakar
driver specific menu Add helper function v4l2_ctrl_new_std_menu_items(), which adds a standard menu control, with driver specific menu. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] V4L: Add [get/set]_frame_desc subdev callbacksSylwester Nawrocki
Add subdev callbacks for setting up parameters of the frame on media bus that are not exposed to user space directly. This is just an initial, mostly stub implementation. struct v4l2_mbus_frame_desc is intended to be extended with sub-structures specific to a particular hardware media bus. For now these new callbacks are used only to query or specify maximum size of a compressed or hybrid (container) media bus frame in octets. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] V4L: Add s_rx_buffer subdev video operationSylwester Nawrocki
The s_rx_buffer callback allows the host to set buffer for a data being received by the subdev, e.g. non-image frame (meta) data. This callback can be implemented by subdevice like a MIPI CSI2 receiver, allowing the host driver to gather additional data into frame buffer passed to user space. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] dm644x: replace the obsolete preset API by the timings APIHans Verkuil
This patch replaces the preset API by the timings API, and appropriate changes in board file. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Add pipeline ops to separate FIMC-LITE moduleSylwester Nawrocki
In order to reuse the FIMC-LITE module on Exynos4 and Exynos5 SoC introduce a set of callbacks for the media pipeline control from within FIMC/FIMC-LITE video node. It lets us avoid symbol dependencies between FIMC-LITE and the whole media device driver, which simplifies the initialization sequences and doesn't introduce issues preventing common kernel image for exynos4 and exynos5 SoCs. This patch also corrects following build errors: drivers/built-in.o: In function `buffer_queue': drivers/media/video/s5p-fimc/fimc-lite.c:414: undefined reference to `fimc_pipeline_s_stream' drivers/built-in.o: In function `fimc_lite_resume': drivers/media/video/s5p-fimc/fimc-lite.c:1518: undefined reference to `fimc_pipeline_initialize' drivers/built-in.o: In function `fimc_lite_suspend': drivers/media/video/s5p-fimc/fimc-lite.c:1544: undefined reference to `fimc_pipeline_shutdown' when only CONFIG_VIDEO_EXYNOS_FIMC_LITE is selected, without CONFIG_VIDEO_S5P_FIMC. Reported-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] v4l2-ctrls: add a filter function to v4l2_ctrl_add_handlerHans Verkuil
With a filter function you can control more precisely which controls are added. This is useful in particular for radio device nodes for combined TV/Radio cards where you want to show just the radio-specific controls and not controls like brightness. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] videobuf2-core: Replace BUG_ON and return an error at vb2_queue_init()Ezequiel Garcia
This replaces BUG_ON() calls with WARN_ON(), and returns EINVAL if some parameter is NULL, as suggested by Jonathan and Mauro. The BUG_ON() call is too drastic to be used in this case. See the full discussion here: http://www.spinics.net/lists/linux-media/msg52462.html Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] Add v4l2 subdev driver for S5K4ECGX sensorSangwook Lee
This patch adds driver for Samsung S5K4ECGX image sensor with an embedded SoC ISP. The driver only implements preview operation mode and still capture (snapshot) and face detection features are missing now. Following controls are supported: contrast, saturation, brightness, sharpness. Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>