| Age | Commit message (Collapse) | Author |
|---|
|
A common case with subdev routing is that on the subdevice just before
the DMA engines (video nodes), no multiplexing is allowed on the source
pads, as the DMA engine can only handle a single stream.
In some other situations one might also want to do the same check on the
sink side.
Add new routing validation flags to check these:
V4L2_SUBDEV_ROUTING_NO_SINK_MULTIPLEXING and
V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4L2_SUBDEV_ROUTING_NO_STREAM_MIX routing validation flag means that all
routes from a sink pad must go to the same source pad and all routes
going to the same source pad must originate from the same sink pad.
This does not cover all use cases. For example, if a device routes
all streams from a single sink pad to any of the source pads, but
streams from multiple sink pads can go to the same source pad, the
current flag is too restrictive.
Split the flag into two parts, V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX
and V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX, which add the restriction
only on one side of the device. Together they mean the same as
V4L2_SUBDEV_ROUTING_NO_STREAM_MIX.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Route validation docs use the word 'may'. Change that to 'shall' for
emphasis.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Destructive overlay support (i.e. where the video frame is DMA-ed
straight into a framebuffer) is effectively dead. It was a
necessary evil in the early days when computers were not fast enough
to copy SDTV video frames around, but today that's no longer a problem.
It requires access to the framebuffer memory, which is a bad idea and
very hard to do safely. In addition, in drm it is today almost
impossible to get hold of the framebuffer address.
So drop support for this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
dvb_net.h includes a bunch of core networking headers which increases
the number of objects rebuilt when we touch them. They are unnecessary
for the header itself and only one driver has an indirect dependency.
tveeprom.h includes if_packet to gain access to ETH_ALEN. This
is a bit of an overkill because if_packet.h pulls in skbuff.h.
The definition of ETH_ALEN is in the uAPI header, which is
very rarely touched, so switch to including that.
This results in roughly 250 fewer objects built when skbuff.h
is touched (6028 -> 5788).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a keymap for the simple IR (NEC) remote used with the Beelink
Mini MXIII Android STB device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a common keymap for the RC10/RC0 and RC20/RC-BT remotes used with
the Dreambox One and Dreambox Two DVB-S/T boxes. The maps are combined
since the IR codes do not conflict and both boxes have shipped with
both remote designs over time.
Both remote types can be programmed to control TVs, so include non-IR
keys that are used to switch-to or toggle the remote mode:
- DREAM in RC10/RC0 switches to (Dreambox) STB control mode
- TV in RC10/RC0 switches to TV control mode
- MODE in RC20/RC-BT toggles between STB/TV/BT control modes
In the RC20 keymap the Android MIC (voice search) key maps to KEY_HELP
and EXIT is mapped to KEY_ESC to replicate the go-backwards navigation
behaviour in the Android vendor OS that ships on Dreambox devices.
Signed-off-by: Emanuel Strobel <emanuel.strobel@yahoo.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye,
stkwebcam, tm6000, vpfe_capture and zr364xx
- saa7146 recovered from staging/deprecated. We opted to give ti a
chance, and, instead of deprecating it, the intention is to write
patches migrating it from VB1 to VB2.
- av7110 returned from staging/deprecated/ to staging/ as we're not
planning on dropping it any time soon
- media controller API has gained experimental support for G_ROUTING
and streams API. No drivers use it right now. We're planning to add
one after -rc1, giving some time to experience the API and eventually
have changes during the next development cycle
- New sensor drivers: imx296, imx415, ov8858
- Atomisp had lots of changes, specially on its sensor's interface,
making atomisp sensor drivers closer to normal sensor drivers
- media controller kAPI has gained some helpers to traverse pipelines
- uvcvideo now better support power line control
- lots of bug fixes, cleanups and driver improvements
* tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits)
media: imx-mipi-csis: Check csis_fmt validity before use
media: v4l2-subdev.c: clear stream field
media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci"
media: Revert "media: av7110: move to staging/media/deprecated/saa7146"
media: imx-pxp: convert to regmap
media: imx-pxp: Use non-threaded IRQ
media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers
media: imx-pxp: Implement frame size enumeration
media: imx-pxp: Pass pixel format value to find_format()
media: imx-pxp: Add media controller support
media: imx-pxp: Don't set bus_info manually in .querycap()
media: imx-pxp: Sort headers alphabetically
media: imx-pxp: add support for i.MX7D
media: imx-pxp: make data_path_ctrl0 platform dependent
media: imx-pxp: disable LUT block
media: imx-pxp: explicitly disable unused blocks
media: imx-pxp: extract helper function to setup data path
media: imx-pxp: detect PXP version
media: dt-bindings: media: fsl-pxp: convert to yaml
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
platform/x86: dell-ddv: Prefer asynchronous probing
platform/x86: dell-ddv: Add hwmon support
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
platform: mellanox: mlx-platform: Add mux selection register to regmap
platform_data/mlxreg: Add field with mapped resource address
platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
platform: mellanox: Extend all systems with I2C notification callback
platform: mellanox: Split logic in init and exit flow
platform: mellanox: Split initialization procedure
platform: mellanox: Introduce support of new Nvidia L1 switch
platform: mellanox: Introduce support for next-generation 800GB/s switch
platform: mellanox: Cosmetic changes - rename to more common name
platform: mellanox: Change "reset_pwr_converter_fail" attribute
platform: mellanox: Introduce support for rack manager switch
MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
x86/platform/uv: Make kobj_type structure constant
platform/x86: think-lmi: Make kobj_type structure constant
...
|
|
This reverts commit e33fdb5a02490059e2f48ced2c038c8a46c6476d.
The saa7146-based devices are still in use, esp. for DVB. So move
these drivers back to mainline.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The following drivers under drivers/media/i2c: ov08x40.c, ov13858.c,
ov13b10.c, ov2680.c, ov2685.c, ov2740.c, ov4689.c, ov5670.c,
ov5675.c, ov5695.c, ov8856.c, ov9282.c and ov9734.c,
as well as various "atomisp" sensor drivers in drivers/staging, *all*
use register access helpers with the following function prototypes:
int ovxxxx_read_reg(struct ovxxxx_dev *sensor, u16 reg,
unsigned int len, u32 *val);
int ovxxxx_write_reg(struct ovxxxx_dev *sensor, u16 reg,
unsigned int len, u32 val);
To read/write registers on Omnivision OVxxxx image sensors wich expect
a 16 bit register address in big-endian format and which have 1-3 byte
wide registers, in big-endian format (for the higher width registers).
Add a new ov_16bit_addr_reg_helpers.h header file with static inline
versions of these register access helpers, so that this code duplication
can be removed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There are no existing users of s5c73m3_platform_data in the tree, and
new users should either be using device tree, ACPI, or static device
properties, so let's remove it from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a media_pipeline_for_each_entity() macro to iterate over entities in
a pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.
Deprecate the media_graph_walk API to indicate it shouldn't be used in
new drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a media_pipeline_for_each_pad() macro to iterate over pads in a
pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
present
Make v4l2_async_register_subdev_sensor() try to get a privacy LED
associated with the sensor and extend the call_s_stream() wrapper to
enable/disable the privacy LED if found.
This makes the core handle privacy LED control, rather then having to
duplicate this code in all the sensor drivers.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-2-hdegoede@redhat.com
|
|
Since the headerfile is only used in usb devices it is better
placed with the other usb files.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Cypress EZUSB FX3 UVC example can be configured to report pixel
format "e436eb7e-524f-11ce-9f53-0020af0ba770". This is its GUID for
BGRA/X 8:8:8:8.
The UVC 1.5 spec [1] only defines GUIDs for YUY2, NV12, M420 and I420.
This seems to be an extension documented in the Microsoft Windows Media
Format SDK[2]. This Media Format SDK defines this GUID as corresponding
to `MEDIASUBTYPE_RGB32`, which is confirmed by [4] as `MEDIASUBTYPE_ARGB32`
has different GUID.
Note that in my case, the FX3 UVC can output either channel order,
BGR or RGB or any other mix for that matter. Since Linux commit
1b8dc32286a1a ("[media] uvcvideo: Add GUID for BGR 8:8:8")
defined a GUID for `MEDIASUBTYPE_RGB24` channel order as BGR, keep
this change consistent and define `MEDIASUBTYPE_RGB32` as BGR as well.
Document [3] also indicates the channel order is BGR.
[1] https://www.usb.org/document-library/video-class-v15-document-set
[2] https://learn.microsoft.com/en-us/windows/win32/wmformat/media-type-identifiers
[3] https://learn.microsoft.com/en-us/windows/win32/directshow/uncompressed-rgb-video-subtypes
[4] https://gix.github.io/media-types/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20230126231456.3402323-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vpfe_capture drivers do not use the vb2 framework for streaming
video, instead they use the old vb1 framework and nobody stepped in to
convert these drivers to vb2.
The hardware is very old, so the decision was made to remove them
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The stream field identifies the stream this frame descriptor applies to in
routing configuration across a multiplexed link.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The v4l2_subdev_s_stream_helper() helper can be used by subdevs that
implement the stream-aware .enable_streams() and .disable_streams()
operations to implement .s_stream(). This is limited to subdevs that
have a single source pad.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add two new subdev pad operations, .enable_streams() and
.disable_streams(), to allow control of individual streams per pad. This
is a superset of what the video .s_stream() operation implements.
To help with handling of backward compatibility, add two wrapper
functions around those operations, and require their usage in drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a helper function to translate streams between two pads of a subdev,
using the subdev's internal routing table.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a v4l2_subdev_routing_validate() helper for verifying routing for
common cases like only allowing non-overlapping 1-to-1 streams.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
v4l2_subdev_set_routing_with_fmt() is the same as
v4l2_subdev_set_routing(), but additionally initializes all the streams
with the given format.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add two helper functions to make dealing with streams easier:
v4l2_subdev_routing_find_opposite_end - given a routing table and a pad
+ stream, return the pad + stream on the opposite side of the subdev.
v4l2_subdev_state_get_opposite_stream_format - return a pointer to the
format on the pad + stream on the opposite side from the given pad +
stream.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support to manage configurations (format, crop, compose) per stream,
instead of per pad. This is accomplished with data structures that hold
an array of all subdev's stream configurations.
The number of streams can vary at runtime based on routing. Every time
the routing is changed, the stream configurations need to be
re-initialized.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a for_each_active_route() macro to replace the repeated pattern
of iterating on the active routes of a routing table.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a helper function to set the subdev routing. The helper can be used
from subdev driver's set_routing op to store the routing table.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a v4l2_subdev_has_pad_interdep() helper function which can be used
for media_entity_operations.has_pad_interdep op.
It considers two pads interdependent if there is an active route between
pad0 and pad1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for subdev internal routing. A route is defined as a single
stream from a sink pad to a source pad.
The userspace can configure the routing via two new ioctls,
VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can
implement the functionality with v4l2_subdev_pad_ops.set_routing().
- Add sink and source streams for multiplexed links
- Copy the argument back in case of an error. This is needed to let the
caller know the number of routes.
- Expand and refine documentation.
- Make the 'routes' pointer a __u64 __user pointer so that a compat32
version of the ioctl is not required.
- Add struct v4l2_subdev_krouting to be used for subdevice operations.
- Fix typecasing warnings
- Check sink & source pad types
- Add 'which' field
- Routing to subdev state
- Dropped get_routing subdev op
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add subdev flag V4L2_SUBDEV_FL_STREAMS. It is used to indicate that the
subdev supports the new API with multiplexed streams (routing, stream
configs).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document the function parameters, the requirements on the pad0 and pad1
arguments, the locking requirements and the return value. Also improve
the documentation of the corresponding .has_pad_interdep() operation,
stating clearly that the operation must be called through the
media_entity_has_pad_interdep() function only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The davinci dm3xx/dm644x platforms are gone now, and the remaining
da8xx platforms do not use the vpbe driver, so the driver can be
removed as well.
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This driver was for the davinci dm644x and dm3xx platforms that are
now removed from the kernel, so there are no more users.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Tag branch
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* tag 'br-v6.2i' of git://linuxtv.org/hverkuil/media_tree: (31 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
|
|
The driver has an option to pass in GPIO numbers from platform
data but this is not used in the kernel so delete this. Get
GPIO descriptors using the standard API and simplify the code,
gpiolib will handle any inversions.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The driver has an option to pass in GPIO numbers from platform
data but this is not used in the kernel so delete this and the
whole platform data mechanism.
Get GPIO descriptors using the standard API and simplify the code,
gpiolib will handle any inversions.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Everything is about THS7303, so let the include guard reflect it as well
to avoid potential future conflict.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Some devices support sampling of the parallel data at both edges of the
interface pixel clock in order to reduce the pixel clock by two.
Add a mediabus flag that represents this feature.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Previous commit that introduces reference counter does not add proper
comments, which will lead to warning when building htmldocs. Fix them.
Reported-by: "Stephen Rothwell" <sfr@canb.auug.org.au>
Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Commit 707947247e95 ("media: videobuf2-vmalloc: get_userptr: buffers are
always writable") caused problems in a corner case (passing read-only
shmem memory as a userptr). So revert this patch.
The original problem for which that commit was originally made is
something that I could not reproduce after reverting it. So just go
back to the way it was for many years, and if problems arise in
the future, then another approach should be taken to resolve it.
This patch is based on a patch from Hirokazu.
Fixes: 707947247e95 ("media: videobuf2-vmalloc: get_userptr: buffers are always writable")
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.
This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.
Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Drivers for devices with multiple frontends which cannot be used
concurrently due to hardware limitations which enforce that restriction
by setting the mfe_shared field to 1 exhibit rather unfriendly behavior
towards applications: The unavailable frontend devices cannot be opened
at all, not even for read-only access to query information. Even worse,
any open call is blocked for 5 seconds by default.
Allow drivers for such devices to behave like regular busy frontend
devices instead, i.e. still allowing concurrent read access to the
unavailable frontend and denying concurrent write access with -EBUSY
without delay.
This patch does not alter the behavior of any existing driver to avoid
regressions. Driver developers who wish to take advantage of this must
ensure their driver can handle all read-only accesses to the unavailable
frontend, and indicate the capability by setting the mfe_shared field to
2 instead of 1.
Add a check to dvb-usb-init.c when automatically setting the mfe_shared
field that when a driver has already set the field to 2, it is not
overwritten.
Document the additional capability in the code comment about mfe_shared.
Link: https://lore.kernel.org/linux-media/trinity-22c77578-26b0-4867-9ff7-2668e5d22c64-1642799929896@3c-app-gmx-bap04
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Tested-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is no such error code EVINAL.
Link: https://lore.kernel.org/linux-media/270f5b7f79a24dc1a3e81d94f6f54fc0f08daf56.1639732105.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When userspace called VIDIOC_STREAMON, then you want to claim any streaming
resources needed and validate the video pipeline. Waiting for
start_streaming to be called is too late, since that can be postponed
until the required minimum of buffers is queued.
So add a prepare_streaming op (optional) that can be used for that
purpose, and a matching unprepare_streaming op (optional) that can
release any claimed resources. The unprepare_streaming op is called
when VIDIOC_STREAMOFF is called and q->streaming is 1, or when the
filehandle is closed while q->streaming is 1.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Tag branch
* tag 'br-v6.2e' of git://linuxtv.org/hverkuil/media_tree: (29 commits)
media: davinci/vpbe: Fix a typo ("defualt_mode")
media: sun6i-csi: Remove unnecessary print function dev_err()
media: Documentation: Drop deprecated bytesused == 0
media: platform: exynos4-is: fix return value check in fimc_md_probe()
media: dvb-core: remove variable n, turn for-loop to while-loop
media: vivid: fix compose size exceed boundary
media: rkisp1: make const arrays ae_wnd_num and hist_wnd_num static
media: dvb-core: Fix UAF due to refcount races at releasing
media: rkvdec: Add required padding
media: aspeed: Extend debug message
media: aspeed: Support aspeed mode to reduce compressed data
media: Documentation: aspeed-video: Add user documentation for the aspeed-video driver
media: v4l2-ctrls: Reserve controls for ASPEED
media: v4l: Add definition for the Aspeed JPEG format
staging: media: tegra-video: fix device_node use after free
staging: media: tegra-video: fix chan->mipi value on error
media: cedrus: initialize controls a bit later
media: cedrus: prefer untiled capture format
media: cedrus: Remove cedrus_codec enum
media: cedrus: set codec ops immediately
...
|
|
Let's spell the variable name correctly.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Nothing in the kernel uses the platform data code path.
Drop it, and drop the use of the old legacy <linux/gpio.h>
API in the process.
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Complain in the newly added s_stream video op wrapper if disabling
streaming failed. Also return zero in this case as there's nothing the
caller can do to return the error.
This way drivers also won't need to bother with printing error messages.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
|
