summaryrefslogtreecommitdiff
path: root/include/misc
AgeCommit message (Collapse)Author
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03ocxl: Provide global MMIO accessors for external driversAlastair D'Silva
External drivers that communicate via OpenCAPI will need to make MMIO calls to interact with the devices. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03ocxl: move event_fd handling to frontendAlastair D'Silva
Event_fd is only used in the driver frontend, so it does not need to exist in the backend code. Relocate it to the frontend and provide an opaque mechanism for consumers instead. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03ocxl: Allow external drivers to use OpenCAPI contextsAlastair D'Silva
Most OpenCAPI operations require a valid context, so exposing these functions to external drivers is necessary. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03ocxl: Create a clear delineation between ocxl backend & frontendAlastair D'Silva
The OCXL driver contains both frontend code for interacting with userspace, as well as backend code for interacting with the hardware. This patch separates the backend code from the frontend so that it can be used by other device drivers that communicate via OpenCAPI. Relocate dev, cdev & sysfs files to the frontend code to allow external drivers to maintain their own devices. Reference counting on the device in the backend is replaced with kref counting. Move file & sysfs layer initialisation from core.c (backend) to pci.c (frontend). Create an ocxl_function oriented interface for initing devices & enumerating AFUs. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03ocxl: Remove some unused exported symbolsAlastair D'Silva
Remove some unused exported symbols. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03ocxl: Remove superfluous 'extern' from headersAlastair D'Silva
The 'extern' keyword adds no value here. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-17auxdisplay: charlcd: Introduce charlcd_free() helperAndy Shevchenko
The charlcd_free() is a counterpart to charlcd_alloc() and should be called symmetrically on tear down. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-07-02Revert "cxl: Allow a default context to be associated with an external pci_dev"Frederic Barrat
Remove abandonned capi support for the Mellanox CX4. This reverts commit a19bd79e31769626d288cc016e21a31b6f47bf6f. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02Revert "cxl: Add cxl_slot_is_supported API"Frederic Barrat
Remove abandonned capi support for the Mellanox CX4. This reverts commit 4e56f858bdde5cbfb70f61baddfaa56a8ed851bf. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02Revert "cxl: Add cxl_check_and_switch_mode() API to switch bi-modal cards"Alastair D'Silva
Remove abandonned capi support for the Mellanox CX4. This reverts commit b0b5e5918ad1babfd1d43d98c7281926a7b57b9f. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02Revert "cxl: Add preliminary workaround for CX4 interrupt limitation"Alastair D'Silva
Remove abandonned capi support for the Mellanox CX4. This reverts commit cbce0917e2e47d4bf5aa3b5fd6b1247f33e1a126. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02Revert "cxl: Add support for interrupts on the Mellanox CX4"Alastair D'Silva
Remove abandonned capi support for the Mellanox CX4. This reverts commit a2f67d5ee8d950caaa7a6144cf0bfb256500b73e. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02Revert "cxl: Add kernel API to allow a context to operate with relocate ↵Alastair D'Silva
disabled" Remove abandonned capi support for the Mellanox CX4. The symbol 'cxl_set_translation_mode' is never called, so ctx->real_mode is always false. This reverts commit 7a0d85d313c2066712e530e668bc02bb741a685c. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-03ocxl: Expose the thread_id needed for wait on POWER9Alastair D'Silva
In order to successfully issue as_notify, an AFU needs to know the TID to notify, which in turn means that this information should be available in userspace so it can be communicated to the AFU. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-02Merge tag 'powerpc-4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when using the hash table MMU. - Extend our interrupt soft masking to support masking PMU interrupts as well as "normal" interrupts, and then use that to implement local_t for a ~4x speedup vs the current atomics-based implementation. - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface (OpenCAPI)" devices. - Support for new device tree properties on PowerVM to describe hotpluggable memory and devices. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO. - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch. As well as quite a lot of other changes all over the place, and small fixes and cleanups as always. Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl Gomonovych" * tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits) powerpc/mm/radix: Fix build error when RADIX_MMU=n macintosh/ams-input: Use true and false for boolean values macintosh: change some data types from int to bool powerpc/watchdog: Print the NIP in soft_nmi_interrupt() powerpc/watchdog: regs can't be null in soft_nmi_interrupt() powerpc/watchdog: Tweak watchdog printks powerpc/cell: Remove axonram driver rtc-opal: Fix handling of firmware error codes, prevent busy loops powerpc/mpc52xx_gpt: make use of raw_spinlock variants macintosh/adb: Properly mark continued kernel messages powerpc/pseries: Fix cpu hotplug crash with memoryless nodes powerpc/numa: Ensure nodes initialized for hotplug powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/kernel: Block interrupts when updating TIDR powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn powerpc/mm/nohash: do not flush the entire mm when range is a single page powerpc/pseries: Add Initialization of VF Bars powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV powerpc/eeh: Add EEH notify resume sysfs powerpc/eeh: Add EEH operations to notify resume ...
2018-01-24ocxl: Add a kernel API for other opencapi driversFrederic Barrat
Some of the functions done by the generic driver should also be needed by other opencapi drivers: attaching a context to an adapter, translation fault handling, AFU interrupt allocation... So to avoid code duplication, the driver provides a kernel API that other drivers can use, similar to calling a in-kernel library. It is still a bit theoretical, for lack of real hardware, and will likely need adjustements down the road. But we used the cxlflash driver as a guinea pig. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24powerpc/powernv: Capture actag information for the deviceFrederic Barrat
In the opencapi protocol, host memory contexts are referenced by a 'actag'. During setup, a driver must tell the device how many actags it can used, and what values are acceptable. On POWER9, the NPU can handle 64 actags per link, so they must be shared between all the PCI functions of the link. To get a global picture of how many actags are used by each AFU of every function, we capture some data at the end of PCI enumeration, so that actags can be shared fairly if needed. This is not powernv specific per say, but rather a consequence of the opencapi configuration specification being quite general. The number of available actags on POWER9 makes it more likely to be hit. This is somewhat mitigated by the fact that existing AFUs are coded by requesting a reasonable count of actags and existing devices carry only one AFU. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-03cxl: Export library to support IBM XSLChristophe Lombard
This patch exports a in-kernel 'library' API which can be called by other drivers to help interacting with an IBM XSL on a POWER9 system. The XSL (Translation Service Layer) is a stripped down version of the PSL (Power Service Layer) used in some cards such as the Mellanox CX5. Like the PSL, it implements the CAIA architecture, but has a number of differences, mostly in it's implementation dependent registers. The XSL also uses a special DMA cxl mode, which uses a slightly different init sequence for the CAPP and PHB. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-17auxdisplay: charlcd: Add support for 4-bit interfacesGeert Uytterhoeven
In 4-bit mode, 8-bit commands and data are written using two raw writes to the data interface: high nibble first, low nibble last. This must be handled by the low-level driver. However, as we don't know in which mode (4-bit or 8-bit) nor 4-bit phase the LCD was left, initialization must always be handled using raw writes, and needs to configure the LCD for 8-bit mode first. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17auxdisplay: charlcd: Extract character LCD core from misc/panelGeert Uytterhoeven
Extract the character LCD core from the Parallel port LCD/Keypad Panel driver in the misc subsystem, and convert it into a subdriver in the auxdisplay subsystem. This allows the character LCD core to be used by other drivers later. Compilation is controlled by its own Kconfig symbol CHARLCD, which is to be selected by its users, but can be enabled manually for compile-testing. All functions changed their prefix from "lcd_" to "charlcd_", and gained a "struct charlcd *" parameter to operate on a specific instance. While the driver API thus is ready to support multiple instances, the current limitation of a single display (/dev/lcd has a single misc minor assigned) is retained. No functional changes intended. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-14cxl: Add cxl_check_and_switch_mode() API to switch bi-modal cardsAndrew Donnellan
Add a new API, cxl_check_and_switch_mode() to allow for switching of bi-modal CAPI cards, such as the Mellanox CX-4 network card. When a driver requests to switch a card to CAPI mode, use PCI hotplug infrastructure to remove all PCI devices underneath the slot. We then write an updated mode control register to the CAPI VSEC, hot reset the card, and reprobe the card. As the card may present a different set of PCI devices after the mode switch, use the infrastructure provided by the pnv_php driver and the OPAL PCI slot management facilities to ensure that: * the old devices are removed from both the OPAL and Linux device trees * the new devices are probed by OPAL and added to the OPAL device tree * the new devices are added to the Linux device tree and probed through the regular PCI device probe path As such, introduce a new option, CONFIG_CXL_BIMODAL, with a dependency on the pnv_php driver. Refactor existing code that touches the mode control register in the regular single mode case into a new function, setup_cxl_protocol_area(). Co-authored-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14cxl: Add support for interrupts on the Mellanox CX4Ian Munsie
The Mellanox CX4 in cxl mode uses a hybrid interrupt model, where interrupts are routed from the networking hardware to the XSL using the MSIX table, and from there will be transformed back into an MSIX interrupt using the cxl style interrupts (i.e. using IVTE entries and ranges to map a PE and AFU interrupt number to an MSIX address). We want to hide the implementation details of cxl interrupts as much as possible. To this end, we use a special version of the MSI setup & teardown routines in the PHB while in cxl mode to allocate the cxl interrupts and configure the IVTE entries in the process element. This function does not configure the MSIX table - the CX4 card uses a custom format in that table and it would not be appropriate to fill that out in generic code. The rest of the functionality is similar to the "Full MSI-X mode" described in the CAIA, and this could be easily extended to support other adapters that use that mode in the future. The interrupts will be associated with the default context. If the maximum number of interrupts per context has been limited (e.g. by the mlx5 driver), it will automatically allocate additional kernel contexts to associate extra interrupts as required. These contexts will be started using the same WED that was used to start the default context. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14cxl: Add preliminary workaround for CX4 interrupt limitationIan Munsie
The Mellanox CX4 has a hardware limitation where only 4 bits of the AFU interrupt number can be passed to the XSL when sending an interrupt, limiting it to only 15 interrupts per context (AFU interrupt number 0 is invalid). In order to overcome this, we will allocate additional contexts linked to the default context as extra address space for the extra interrupts - this will be implemented in the next patch. This patch adds the preliminary support to allow this, by way of adding a linked list in the context structure that we use to keep track of the contexts dedicated to interrupts, and an API to simultaneously iterate over the related context structures, AFU interrupt numbers and hardware interrupt numbers. The point of using a single API to iterate these is to hide some of the details of the iteration from external code, and to reduce the number of APIs that need to be exported via base.c to allow built in code to call. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14cxl: Add kernel APIs to get & set the max irqs per contextIan Munsie
These APIs will be used by the Mellanox CX4 support. While they function standalone to configure existing behaviour, their primary purpose is to allow the Mellanox driver to inform the cxl driver of a hardware limitation, which will be used in a future patch. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14cxl: Allow a default context to be associated with an external pci_devIan Munsie
The cxl kernel API has a concept of a default context associated with each PCI device under the virtual PHB. The Mellanox CX4 will also use the cxl kernel API, but it does not use a virtual PHB - rather, the AFU appears as a physical function as a peer to the networking functions. In order to allow the kernel API to work with those networking functions, we will need to associate a default context with them as well. To this end, refactor the corresponding code to do this in vphb.c and export it so that it can be called from the PHB code. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14cxl: Move cxl_afu_get / cxl_afu_put to baseIan Munsie
The Mellanox CX4 uses a model where the AFU is one physical function of the device, and is used by other peer physical functions of the same device. This will require those other devices to grab a reference on the AFU when they are initialised to make sure that it does not go away during their lifetime. Move the AFU refcount functions to base.c so they can be called from the PHB code. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14cxl: Add cxl_slot_is_supported APIIan Munsie
This extends the check that the adapter is in a CAPI capable slot so that it may be called by external users in the kernel API. This will be used by the upcoming Mellanox CX4 support, which needs to know ahead of time if the card can be switched to cxl mode so that it can leave it in PCI mode if it is not. This API takes a parameter to check if CAPP DMA mode is supported, which it currently only allows on P8NVL systems, since that mode currently has issues accessing memory < 4GB on P8, and we cannot realistically avoid that. This API does not currently check if a CAPP unit is available (i.e. not already assigned to another PHB) on P8. Doing so would be racy since it is assigned on a first come first serve basis, and so long as CAPP DMA mode is not supported on P8 we don't need this, since the only anticipated user of this API requires CAPP DMA mode. Cc: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-28cxl: Add set and get private data to context structMichael Neuling
This provides AFU drivers a means to associate private data with a cxl context. This is particularly intended for make the new callbacks for driver specific events easier for AFU drivers to use, as they can easily get back to any private data structures they may use. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-28cxl: Add mechanism for delivering AFU driver specific eventsPhilippe Bergheaud
This adds an afu_driver_ops structure with fetch_event() and event_delivered() callbacks. An AFU driver such as cxlflash can fill this out and associate it with a context to enable passing custom AFU specific events to userspace. This also adds a new kernel API function cxl_context_pending_events(), that the AFU driver can use to notify the cxl driver that new specific events are ready to be delivered, and wake up anyone waiting on the context wait queue. The current count of AFU driver specific events is stored in the field afu_driver_events of the context structure. The cxl driver checks the afu_driver_events count during poll, select, read, etc. calls to check if an AFU driver specific event is pending, and calls fetch_event() to obtain and deliver that event. This way, the cxl driver takes care of all the usual locking semantics around these calls and handles all the generic cxl events, so that the AFU driver only needs to worry about it's own events. fetch_event() return a struct cxl_event_afu_driver_reserved, allocated by the AFU driver, and filled in with the specific event information and size. Total event size (header + data) should not be greater than CXL_READ_MIN_SIZE (4K). Th cxl driver prepends an appropriate cxl event header, copies the event to userspace, and finally calls event_delivered() to return the status of the operation to the AFU driver. The event is identified by the context and cxl_event_afu_driver_reserved pointers. Since AFU drivers provide their own means for userspace to obtain the AFU file descriptor (i.e. cxlflash uses an ioctl on their scsi file descriptor to obtain the AFU file descriptor) and the generic cxl driver will never use this event, the ABI of the event is up to each individual AFU driver. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11cxl: Add kernel API to allow a context to operate with relocate disabledIan Munsie
cxl devices typically access memory using an MMU in much the same way as the CPU, and each context includes a state register much like the MSR in the CPU. Like the CPU, the state register includes a bit to enable relocation, which we currently always enable. In some cases, it may be desirable to allow a device to access memory using real addresses instead of effective addresses, so this adds a new API, cxl_set_translation_mode, that can be used to disable relocation on a given kernel context. This can allow for the creation of a special privileged context that the device can use if it needs relocation disabled, and can use regular contexts at times when it needs relocation enabled. This interface is only available to users of the kernel API for obvious reasons, and will never be supported in a virtualised environment. This will be used by the upcoming cxl support in the mlx5 driver. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Remove cxl_get_phys_dev() kernel APIFrederic Barrat
The cxl_get_phys_dev() API returns a struct device pointer which could belong to either a struct pci_dev (bare-metal) or platform_device (powerVM). To avoid potential problems in drivers, remove that API. It was introduced to allow drivers to read the VPD of the adapter, but the cxl driver now provides the cxl_pci_read_adapter_vpd() API for that purpose. Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09cxl: Support the cxl kernel API from a guestFrederic Barrat
Like on bare-metal, the cxl driver creates a virtual PHB and a pci device for the AFU. The configuration space of the device is mapped to the configuration record of the AFU. Reuse the code defined in afu_cr_read8|16|32() when reading the configuration space of the AFU device. Even though the (virtual) AFU device is a pci device, the adapter is not. So a driver using the cxl kernel API cannot read the VPD of the adapter through the usual PCI interface. Therefore, we add a call to the cxl kernel API: ssize_t cxl_read_adapter_vpd(struct pci_dev *dev, void *buf, size_t count); Co-authored-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-14cxl: Allow the kernel to trust that an image won't change on PERST.Daniel Axtens
Provide a kernel API and a sysfs entry which allow a user to specify that when a card is PERSTed, it's image will stay the same, allowing it to participate in EEH. cxl_reset is used to reflash the card. In that case, we cannot safely assert that the image will not change. Therefore, disallow cxl_reset if the flag is set. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-03cxl: Add AFU virtual PHB and kernel APIMichael Neuling
This patch does two things. Firstly it presents the Accelerator Function Unit (AFUs) behind the POWER Service Layer (PSL) as PCI devices on a virtual PCI Host Bridge (vPHB). This in in addition to the PSL being a PCI device itself. As part of the Coherent Accelerator Interface Architecture (CAIA) AFUs can provide an AFU configuration. This AFU configuration recored is architected to be the same as a PCI config space. This patch sets discovers the AFU configuration records, provides AFU config space read/write functions to these configuration records. It then enumerates the PCI bus. It also hooks in PCI ops where appropriate. It also destroys the vPHB when the physical card is removed. Secondly, it add an in kernel API for AFU to use CXL. AFUs must present a driver that firstly binds as a PCI device. This PCI device can then be using to do CXL specific operations (that can't sit in the PCI ops) using this API. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-03cxl: Move include file cxl.h -> cxl-base.hMichael Neuling
This moves the current include file from cxl.h -> cxl-base.h. This current include file is used only to pass information between the base driver that needs to be built into the kernel and the cxl module. This is to make way for a new include/misc/cxl.h which will contain just the kernel API for other driver to use Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08cxl: Add new header for call backs and structsIan Munsie
This new header adds callbacks and structs needed by the rest of the kernel to hook into the cxl infrastructure. This adds the cxl_ctx_in_use() function for use in the mm code to see if any cxl contexts are currently in use. This is used by the tlbie() to determine if it can do local TLB invalidations or not. This also adds get/put calls for the cxl driver module to refcount the active cxl contexts. cxl_ctx_get/put/in_use are static inlined here as they are called in tlbie which we want to be fast (mpe's suggestion). Empty functions are provided when CONFIG_CXL_BASE is not enabled. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2011-09-23[media] altera-stapl: it is time to move out from stagingIgor M. Liplianin
[mchehab@redhat.com: Fix a merge conflict] Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>