| Age | Commit message (Collapse) | Author |
|---|
|
While disassociating from a PAN ourselves, let's set the maximum number
of associations temporarily to zero to be sure no new device tries to
associate with us.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20231128111655.507479-6-miquel.raynal@bootlin.com
|
|
Track the count of associated devices. Limit the number of associations
using the value provided by the user if any. If we reach the maximum
number of associations, we tell the device we are at capacity. If the
user do not want to accept any more associations, it may specify the
value 0 to the maximum number of associations, which will lead to an
access denied error status returned to the peers trying to associate.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-10-miquel.raynal@bootlin.com
|
|
Coordinators may refuse associations. We need a user input for
that. Let's add a new netlink command which can provide a maximum number
of devices we accept to associate with as a first step. Later, we could
also forward the request to userspace and check whether the association
should be accepted or not.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-9-miquel.raynal@bootlin.com
|
|
Coordinators may have to handle association requests from peers which
want to join the PAN. The logic involves:
- Acknowledging the request (done by hardware)
- If requested, a random short address that is free on this PAN should
be chosen for the device.
- Sending an association response with the short address allocated for
the peer and expecting it to be ack'ed.
If anything fails during this procedure, the peer is considered not
associated.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-8-miquel.raynal@bootlin.com
|
|
A device may decide at some point to disassociate from a PAN, let's
introduce a netlink command for this purpose.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-6-miquel.raynal@bootlin.com
|
|
Users may decide to associate with a peer, which becomes our parent
coordinator. Let's add the necessary netlink support for this.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-4-miquel.raynal@bootlin.com
|
|
Introduce structures to describe peer devices in a PAN as well as a few
related helpers. We basically care about:
- Our unique parent after associating with a coordinator.
- Peer devices, children, which successfully associated with us.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-3-miquel.raynal@bootlin.com
|
|
Add an enum heading to the kernel-doc comments to prevent
kernel-doc warnings.
cfg802154.h:174: warning: Cannot understand * @WPAN_PHY_FLAG_TRANSMIT_POWER: Indicates that transceiver will support
on line 174 - I thought it was a doc line
cfg802154.h:192: warning: Enum value 'WPAN_PHY_FLAG_TXPOWER' not described in enum 'wpan_phy_flags'
cfg802154.h:192: warning: Excess enum value 'WPAN_PHY_FLAG_TRANSMIT_POWER' description in 'wpan_phy_flags'
Fixes: edea8f7c75ec ("cfg802154: introduce wpan phy flags")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230714045127.18752-3-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices, like HardMAC ones can be a bit limited in the way they
handle mac commands. In particular, they might just not support it at
all and instead only be able to transmit and receive regular data
packets. In this case, they cannot be used for any of the internal
management commands that we have introduced so far and must be flagged
accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230324110558.90707-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Parse user requests for sending beacons, start sending beacons at a
regular pace. If needed, the pace can be updated with a new request. The
process can also be interrupted at any moment.
The page and channel must be changed beforehands if needed. Interval
orders above 14 are reserved to tell a device it must answer BEACON_REQ
coming from another device as part of an active scan procedure and this
is not yet supported.
A netlink "beacon request" structure is created to list the
requirements.
Mac layers may now implement the ->send_beacons() and
->stop_beacons() hooks.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230125102923.135465-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Implement the core hooks in order to provide the softMAC layer support
for passive scans. Scans are requested by the user and can be aborted.
Changing channels manually is prohibited during scans.
The implementation uses a workqueue triggered at a certain interval
depending on the symbol duration for the current channel and the
duration order provided. More advanced drivers with internal scheduling
capabilities might require additional care but there is none mainline
yet.
Received beacons during a passive scan are processed in a work queue and
their result forwarded to the upper layer.
Active scanning is not supported yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The scan logic will bypass the whole ->set_channel() logic from the top
by calling the driver hook to just switch between channels when
required.
We can no longer rely on the "current" page/channel settings to set the
right symbol duration. Let's add these as new parameters to allow
providing the page/channel couple that we want.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
This helper for now only checks if the page member and channel member
are valid (in the specification range) and supported (by checking the
device capabilities). Soon two new parameters will be introduced and
having this helper will let us only modify its content rather than
modifying the logic everywhere else in the subsystem.
There is not functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The ieee802154 layer should be able to scan a set of channels in order
to look for beacons advertizing PANs. Supporting this involves adding
two user commands: triggering scans and aborting scans. The user should
also be notified when a new beacon is received and also upon scan
termination.
A scan request structure is created to list the requirements and to be
accessed asynchronously when changing channels or receiving beacons.
Mac layers may now implement the ->trigger_scan() and ->abort_scan()
hooks.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Let's introduce the basics for advertizing discovered PANs and
coordinators, which is:
- A new "scan" netlink message group.
- A couple of netlink command/attribute.
- The main netlink helper to send a netlink message with all the
necessary information to forward the main information to the user.
Two netlink attributes are proactively added to support future UWB
complex channels, but are not actually used yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221129135535.532513-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The current filtering level is set on the first interface up on a wpan
phy. If we support scan functionality we need to change the filtering
level on the fly on an operational phy and switching back again.
This patch will move the receive mode parameter e.g. address filter and
promiscuous mode to the drv_start() functionality to allow changing the
receive mode on an operational phy not on first ifup only. In future this
should be handled on driver layer because each hardware has it's own way
to enter a specific filtering level. However this should offer to switch
to mode IEEE802154_FILTERING_NONE and back to
IEEE802154_FILTERING_4_FRAME_FIELDS.
Only IEEE802154_FILTERING_4_FRAME_FIELDS and IEEE802154_FILTERING_NONE
are somewhat supported by current hardware. All other filtering levels
can be supported in future but will end in IEEE802154_FILTERING_NONE as
the receive part can kind of "emulate" those receive paths by doing
additional filtering routines.
There are in total three filtering levels in the code:
- the per-interface default level (should not be changed)
- the required per-interface level (mac commands may play with it)
- the actual per-PHY (hw) level that is currently in use
Signed-off-by: Alexander Aring <aahringo@redhat.com>
[<miquel.raynal@bootlin.com: Add the third filtering variable]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20221007085310.503366-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
We should never start a transmission after the queue has been stopped.
But because it might work we don't kill the function here but rather
warn loudly the user that something is wrong.
Set a flag when the queue should remain stopped. Reset this flag when
the queue actually gets restarded. Just check this value to know if a
transmission is legitimate, warn if it is not.
Turn the flags variable into an unsigned long to allow the use of atomic
helpers on it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-11-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Right now we are able to stop a queue but we have no indication if a
transmission is ongoing or not.
Thanks to recent additions, we can track the number of ongoing
transmissions so we know if the last transmission is over. Adding on top
of it an internal wait queue also allows to be woken up asynchronously
when this happens. If, beforehands, we marked the queue to be held and
stopped it, we end up flushing and stopping the tx queue.
Thanks to this feature, we will soon be able to introduce a synchronous
transmit API.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-9-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Create a hold_txs atomic variable and increment/decrement it when
relevant, ie. when we want to hold the queue or release it: currently
all the "stopped" situations are suitable, but very soon we will more
extensively use this feature for MLME purposes.
Upon release, the atomic counter is decremented and checked. If it is
back to 0, then the netif queue gets woken up. This makes the whole
process fully transparent, provided that all the users of
ieee802154_wake/stop_queue() now call ieee802154_hold/release_queue()
instead.
In no situation individual drivers should call any of these helpers
manually in order to avoid messing with the counters. There are other
functions more suited for this purpose which have been introduced, such
as the _xmit_complete() and _xmit_error() helpers which will handle all
that for them.
One advantage is that, as no more drivers call the stop/wake helpers
directly, we can safely stop exporting them and only declare the
hold/release ones in a header only accessible to the core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
In order to create a synchronous API for MLME command purposes, we need
to be able to track the end of the ongoing transmissions. Let's
introduce an atomic variable which is incremented when a transmission
starts and decremented when relevant so that we know at any moment
whether there is an ongoing transmission.
The counter gets decremented in the following situations:
- The operation is asynchronous and there was a failure during the
offloading process.
- The operation is synchronous and the synchronous operation failed.
- The operation finished, either successfully or not.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220519150516.443078-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Most protocol-specific pointers in struct net_device are under
a respective ifdef. Wireless is the notable exception. Since
there's a sizable number of custom-built kernels for datacenter
workloads which don't build wireless it seems reasonable to
ifdefy those pointers as well.
While at it move IPv4 and IPv6 pointers up, those are special
for obvious reasons.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> # ieee802154
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As depicted in the IEEE 802.15.4 specification, modulation/bands are
tight to a number of page/channels so we can for most of them derive the
durations automatically.
The two locations that must call this new helper to set the variou
symbol durations are:
- when manually requesting a channel change though the netlink interface
- at PHY creation, once the device driver has set the default
page/channel
If an information is missing, the symbol duration is not touched, a
debug message is eventually printed. This keeps the compatibility with
the unconverted drivers for which it was too complicated for me to find
their precise information. If they initially provided a symbol duration,
it would be kept. If they don't, the symbol duration value is left
untouched.
Once the symbol duration derived, the lifs and sifs durations are
updated as well.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220201180629.93410-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Tdsym is often given in the spec as pretty small numbers in microseconds
and hence was reflected in the code as symbol_duration and was stored as
a u8. Actually, for UWB PHYs, the symbol duration is given in
nanoseconds and are as precise as picoseconds. In order to handle better
these PHYs, change the type of symbol_duration to u32 and store this
value in nanoseconds.
All the users of this variable are updated in a mechanical way.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220201180629.93410-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Give this structure a header to better explain its content.
Signed-off-by: David Girault <david.girault@qorvo.com>
[miquel.raynal@bootlin.com: Isolate this change from a bigger commit and
reword the comment]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220201180956.93581-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds netns support for 802.15.4 subsystem. Most parts are
copy&pasted from wireless subsystem, it has the identically userspace
API.
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds support for accessing mac802154 llsec implementation
over nl802154. I added for a new Kconfig entry to provide this
functionality CONFIG_IEEE802154_NL802154_EXPERIMENTAL. This interface is
still in development. It provides to change security parameters and
add/del/dump entries of security tables. Later we can add also a get to
get an entry by unique identifier.
Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The current header_ops callback structure of net device are used mostly
from 802.15.4 upper-layers. Because this callback structure is a very
generic one, which is also used by e.g. DGRAM AF_PACKET sockets, we
can't make this callback structure 802.15.4 specific which is currently
is.
I saw the smallest "constraint" for calling this callback with
dev_hard_header/dev_parse_header by AF_PACKET which assign a 8 byte
array for address void pointers. Currently 802.15.4 specific protocols
like af802154 and 6LoWPAN will assign the "struct ieee802154_addr" as
these parameters which is greater than 8 bytes. The current callback
implementation for header_ops.create assumes always a complete
"struct ieee802154_addr" which AF_PACKET can't never handled and is
greater than 8 bytes.
For that reason we introduce now a "generic" create/parse header_ops
callback which allows handling with intra-pan extended addresses only.
This allows a small use-case with AF_PACKET to send "somehow" a valid
dataframe over DGRAM.
To keeping the current dev_hard_header behaviour we introduce a similar
callback structure "wpan_dev_header_ops" which contains 802.15.4 specific
upper-layer header creation functionality, which can be called by
wpan_dev_hard_header.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch introduce a new mib entry which isn't part of 802.15.4 but
useful as default behaviour to set the ack request bit or not if we
don't know if the ack request bit should set. This is currently used for
stacks like IEEE 802.15.4 6LoWPAN.
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
We currently supports multiple lowpan interfaces per wpan interface. I
never saw any use case into such functionality. We drop this feature now
because it's much easier do deal with address changes inside the under
laying wpan interface.
This patch removes the multiple lowpan interface and adds a lowpan_dev
netdev pointer into the wpan_dev, if this pointer isn't null the wpan
interface belongs to the assigned lowpan interface.
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Tested-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch help to implement suspend/resume in mac802154, these
hooks will be run before the device is suspended and after it
resumes.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds support for setting the current cca ed level value over
nl802154.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds transmission power setting support for IEEE-802.15.4
devices via nl802154.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch will use atomic operations for sequence number incrementation
while MAC header generation. Upper layers like af_802154 or 6LoWPAN
could call this function in a parallel context while generating 802.15.4
MAC header before queuing into wpan interfaces transmit queue.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch removes the pib lock which is now replaced by rtnl lock. The
new interface already use the rtnl lock only. Nevertheless this patch
will fix issues while using new and old interface at the same time.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds capability flags for supported interface types.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch introduce a flag property for the wpan phy structure.
The current flag settings in ieee802154_hw are accessable in mac802154
layer only which is okay for flags which indicates MAC handling which
are done by phy. For real PHY layer settings like cca mode, transmit
power, cca energy detection level.
The difference between these flags are that the MAC handling flags are
only handled in mac802154/HardMac layer e.g. on an interface up. The phy
settings are direct netlink calls from nl802154 into the driver layer
and the nl802154 need to have a chance to check if the driver supports
this handling before sending to the next layer.
We also check now on PHY flags while dumping and setting pib attributes.
In comparing with MIB attributes the 802.15.4 gives us an default value
which we assume when a transceiver implement less functionality. In case
of MIB settings the nl802154 layer doesn't need to check on the
ieee802154_hw flags then.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds check if the value is really changed inside pib/mib.
If a transceiver do support only one value for e.g. max_be then this
will also handle that the driver layer doesn't need to care about
handling to set one value only.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds support for phy supported handling for all other already
existing handling 802.15.4 functionality. We assume now a fully 802.15.4
complaint transceiver at phy allocation. If a transceiver can support
802.15.4 default values only, then the values should be overwirtten by
values the transceiver supports. If the transceiver doesn't set the
according hardware flags, we assume the 802.15.4 defaults now which
cannot be changed.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Suggested-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch introduce the wpan_phy_supported struct for wpan_phy. There
is currently no way to check if a transceiver can handle IEEE 802.15.4
complaint values. With this struct we can check before if the
transceiver supports these values before sending to driver layer.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Suggested-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Acked-by: Varka Bhadram <varkabhadram@gmail.com>
Cc: Alan Ott <alan@signal11.us>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch change the handling of cca energy detection level from dbm to
mbm. This prepares to handle floating point cca energy detection levels
values. The old netlink 802.15.4 will convert the dbm value to mbm for
handling backward compatibility.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch change the handling of transmit power level from dbm to mbm.
This prepares to handle floating point transmit power levels values. The
old netlink 802.15.4 will convert the dbm value to mbm for handling
backward compatibility.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch change the transmit power from s8 to s32. This prepares to store a
mbm value instead dbm inside the transmit power variable. The old
interface keep the a s8 dbm value, which should be backward compatibility
when assign s8 to s32.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This code is based on commit 6bab2e19c5ffd
("cfg80211: pass name_assign_type to rdev_add_virtual_intf()")
This will expose in sysfs whether the ifname of a IEEE-802.15.4
device is set by userspace or generated by the kernel.
We are using two types of name_assign_types
o NET_NAME_ENUM: Default interface name provided by kernel
o NET_NAME_USER: Interface name provided by user.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds support for setting cca parameters via nl802154.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The current cca setting handle is a driver specific call. We need to
introduce some 802.15.4 specific layer and mapping 802.15.4 cca modes to
driver specific ones inside the 802.15.4 driver. This patch will add
such 802.15.4 layer and mapping the cca settings to driver specific ones.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch changes the byteorder handling for short and panid handling.
We now except to get little endian in nl802154 for these attributes.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch moves the 802.15.4 constraints WPAN_NUM_ defines into
"net/ieee802154.h" which should contain all necessary 802.15.4 related
information. Also rename these defines to a common name which is
IEEE802154_MAX_CHANNEL and IEEE802154_MAX_PAGE.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds support for deleting a wpan interface via nl802154.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
